Oricom UHF5500-1 Handleiding

Oricom Radio UHF5500-1

Lees hieronder de 📖 handleiding in het Nederlandse voor Oricom UHF5500-1 (36 pagina's) in de categorie Radio. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/36
Keep this user guide for future reference.
Always retain your proof of purchase in case of
warranty service and register your product on line at:
AUSTRALIA: www.oricom.com.au
NEW ZEALAND: www.oricom.co.nz
This unit complies with all relevant Australian and
New Zealand approval requirements
AS/NZS 4365: 2011 including radio communications
(NZS2772.1 for human exposure) standard 2003.
Why has the ACMA increased the number of available UHF CB channels?
To provide additional channel capacity within the UHF CB Band the ACMA will over
the next 5 years change the majority of the current wideband 40 channel use to
narrowband 80 channel use.
During this time wideband channel use will be gradually phased out as users
upgrade their existing radio’s.
This means that the new Oricom narrowband radio you have purchased will have more
channels than older wideband radios. Some of these channels are locked and cannot
be used, (see the channel chart for more information).
When did this take place?
Early in 2011 new AS/NZS Standards came into effect allowing operators to use
additional narrowband channels and also use narrowband transmissions on some
current wideband channels. This increased the number of channels up to 80, 75 of
which are useable voice channels.
What issues may users experience during the transition phase?
When a new narrowband radio receives a transmission from an older wideband
radio the speech may sound loud and distorted – simply adjust your radio volume
for the best listening performance.
When an older wideband radio receives a signal from a new narrowband radio
the speech may sound quieter - simply adjust your radio volume for best listening
performance. When operating a narrowband radio or channel 41 - 80 interference is
possible from wideband radios transmitting on high power or an adjacent frequency.
The issues described above but a consequence of mixed are not a fault of the radio
use of wideband and narrowband radios.
It is expected that as older wideband radios are removed from service that this issue
will be resolved.
Most radios in use will be narrowband eliminating this issue.
This information is current at time of printing. For further up to date information
please visit www.acma.gov.au.
Oricom connecting you now.
R-NZ
3
Safety Information and Warnings .....................4
Introduction .....................................................8
Pack Contents ................................................10
Installation .....................................................11
Controls and Indicators ..................................13
Operations .....................................................15
UHF CB channels and frequencies .................26
Customer Support ..........................................31
Express Warranty ...........................................32
Table of contents
Need Help?
If you need assistance setting up or using your Oricom
product now or in the future, call Oricom Support.
Australia 1300 889 785 or (02) 4574 8888
www.oricom.com.au
Mon-Fri 8am – 6pm AEST
New Zealand 0800 67 42 66
www.oricom.co.nz
Mon-Fri 10am – 8pm NZST


Product specificaties

Merk: Oricom
Categorie: Radio
Model: UHF5500-1

Heb je hulp nodig?

Als je hulp nodig hebt met Oricom UHF5500-1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Radio Oricom

Handleiding Radio

Nieuwste handleidingen voor Radio