Oregon Scientific SL928M Handleiding
Oregon Scientific
Stopwatch
SL928M
Lees hieronder de š handleiding in het Nederlandse voor Oregon Scientific SL928M (8 pagina's) in de categorie Stopwatch. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
1
GB
500 LAP STOPWATCH
Model No.: SL928M
USERāS MANUAL
INTRODUCTION
Congratulations on your purchasing the SL928M 500 Lap Stopwatch. A reliable
timepiece for an active lifestyle, the SL928M is equipped with additional functions
such as a multi-step pacer, count-down and count-up timer, and EL back light.
MAIN FEATURES
Refer to (FIG.1).
A. [ LAP/RESET ] BUTTON
Registers a lap or resets, reset stop watch and timer, changes or decreases a
value
B. [ ] BUTTON
Operates the back light
C. [ MODE ] BUTTON
Changes an operating mode or enters a setting procedure
D. [ START/STOP ] BUTTON
Starts or stops the stopwatch, timer or pacer, changes or increases a value
E. [ RECALL ] INDICATOR
Indicates the RECALL function is active
F. [ LAP ] INDICATOR
Indicates the number of laps
G. [ ] INDICATOR
Indicates the PACER mode
H. [ ] INDICATOR
Indicates the TIMER mode
2
GB
I. [ ] INDICATOR
Indicates the daily alarm is active
J. [ SEGMENT ] INDICATOR
Indicates the number of segments in a counting
K. [ ] INDICATOR
Indicates the AUTO LIGHT function is active
L. [ ] INDICATOR
Indicates the lap time
M. [ ] INDICATOR
Indicates the split time
N. [ ] INDICATOR
Indicates the CHRONO mode
O. [ ] INDICATOR
Indicates the accumulated time
P. [ FREE ] INDICATOR
Indicates the effective memory left for laps
Q. SAFETY CORD
Uses to secure the unit on hand or hanging the unit around the neck
DISPLAY MODES
Refer to (FIG. 2).
BACK LIGHT AND AUTO LIGHT
Refer to (FIG. 3).
Press [ ] to turn on the back light for five seconds. To activate the AUTO LIGHT
function, press and hold [ ] [ for two seconds. Press and hold ] again to
deactivate it. When the function is active, pressing any button will turn on the
back light for five seconds.
3
GB
HOW TO SET THE CALENDAR CLOCK
Refer to (FIG. 4).
Note:
a. Clock in either 24-hour or 12-hour (with āaā and āpā indication) format.
b. Calendar year can be set between 2000 to 2099. The unit will automatically
recognize the day of the week.
c. Minute digit will be auto-advanced by one digit if second is reset after 30 sec.
HOW TO USE THE CHRONOGRAPH
Refer to (FIG. 5).
1. Press [ MODE ] to display the CHRONO mode.
2. To register a segment, press [ LAP/RESET ].
3. Press [ START ] to start counting. The stopwatch can count up to 23 hours, 59
minutes and 59.99 seconds before starting from zeros again.
4. Press [ STOP ] to stop counting. To resume, press [ START ]. A new lap count
will start.
5. Or press [ LAP/RESET ]. The last lap number will appear and the LAP and
SPLIT time display will freeze for 5 seconds. The [ ] indicator will flash
indicating the stopwatch is still running in the background.
6. Press [STOP] to stop counting.
7. Repeat the last three steps to register other laps. The stopwatch can register up
to 500 laps.
8. Press [LAP] after stopping to clear the display and register another segment.
Note:
a. The stopwatch can register up to 99 segments.
b. 99 segments share with total 500 lap memories.
c. The effective memory left for laps will be reduced as the number of registered
segments increased.
d. The free memory remained will be shown on the display when a segment is
registered.
Product specificaties
Merk: | Oregon Scientific |
Categorie: | Stopwatch |
Model: | SL928M |
Heb je hulp nodig?
Als je hulp nodig hebt met Oregon Scientific SL928M stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Stopwatch Oregon Scientific
2 Juni 2023
23 Mei 2023
19 Mei 2023
14 Mei 2023
Handleiding Stopwatch
- Stopwatch Accusplit
- Stopwatch Asaklitt
- Stopwatch Dexford
- Stopwatch Extech
- Stopwatch Marquant
- Stopwatch Renkforce
- Stopwatch Silva
- Stopwatch Sportline
- Stopwatch Steren
- Stopwatch ETT
- Stopwatch TFA Dostmann
Nieuwste handleidingen voor Stopwatch
14 Augustus 2023
2 Juli 2023
28 Juni 2023
31 Mei 2023
10 Mei 2023
8 Mei 2023
3 Mei 2023
27 April 2023
27 Maart 2023
13 Maart 2023