Onkyo TX-DS777 Handleiding
Onkyo
Audio / video-ontvanger
TX-DS777
Lees hieronder de 📖 handleiding in het Nederlandse voor Onkyo TX-DS777 (64 pagina's) in de categorie Audio / video-ontvanger. Deze handleiding was nuttig voor 70 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/64
A / V Receiver
TX-DS777
Instruction Manual
Contents
Before using
Important Safeguards ........................................ 2
Precautions........................................................ 3
Features ............................................................. 4
Supplied accessories ......................................... 4
Before operating this unit ................................. 5
Operation
Using the on-screen display ............................ 16
Setting the speaker configuration ................... 18
Setting the speaker distance ............................ 20
Setting the speaker Level ................................ 21
Playing a digital source................................... 23
Presetting FM/AM radio stations.................... 24
Selecting an input source ................................ 26
Selecting a preset station................................. 32
Playing a multichannel input source ............... 33
Using the Listening Modes ............................. 34
Setting the listening mode parameters ....................
38
Assigning a video source
to each audio input source .............................. 40
Giving a name to each input source
and preset radio station ................................... 41
Adjusting the output level of each speaker
while listening to it ......................................... 42
Other setup operations .................................... 43
Recording a source.......................................... 44
Receiving RDS broadcasts
(European models only).................................. 46
The initial settings........................................... 48
Preparation
Audio equipment connections .......................... 6
Video equipment connections........................... 8
Connecting equipment
with 5.1-channel output .................................. 9
Connecting speakers ....................................... 10
Connecting power amplifiers.......................... 12
Connecting an equalizer.................................. 13
Connecting the power ..................................... 13
Making antenna connections .......................... 14
Appendix
Using the remote controller ............................ 49
Programming the remote controller codes of
other devices into the RC-392M ..................... 52
Using a Macro function .................................. 54
Troubleshooting guide .................................... 58
Specifications.................................................. 60
Control positions and names........................... 62
Thank you for purchasing the Onkyo Audio Video
Control Receiver.
Please read this manual thoroughly before making
connections and turning on the power.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new Audio Video Control
Receiver.
Please retain this manual for future reference.
MASTER VOLUME
STANDBY/ON
PHONES VIDEO CAM INPUT/4VIDEO
VIDEO AUDIOLR
(MONO)
SVIDEO
STAND-BY
AV
RECEIVER
TX-DS
777
POWER
OFF
ON
A SPEAKERS B
TI CH
INPUTMUL
FM AM PHONO C
D
TAPEVIDEO-1
DVD VIDEO-4
VIDEO-3
VIDEO-2
D
O
W
N
U
P
FM MUTE/
MODE CHARACTER/
MEMORY SP/SYS
SETUP
MODE
AUDIO
ADJUSTMENT BASS/
TREBLE
DISPLAY DSP REC OUT
PRESET/MODE ADJ
PUSH TO ENTER
DOWN TUNING UP
THX /DTS
SURROUND MODE
LISTENING MODE
STEREODIRECT DIGITAL/
ANALOG CH LEVEL
DIMMER
TX-DS676
2
1. Read Instructions – All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions – The safety and operating instructions
should be retained for future reference.
3. Heed Warnings – All warnings on the appliance and in the op-
erating instructions should be adhered to.
4. Follow Instructions – All operating and use instructions should
be followed.
5. Water and Moisture – The appliance should not be used near
water – for example, near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool, and
the like.
6. Carts and Stands – The appliance
should be used only with a cart or stand
that is recommended by the manufac-
turer.
6A.An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven sur-
faces may cause the appliance and cart
combination to overturn.
7. Wall or Ceiling Mounting – The appliance should be mounted
to a wall or ceiling only as recommended by the manufacturer.
8. Ventilation – The appliance should be situated so that its loca-
tion or position does not interfere with its proper ventilation. For
example, the appliance should not be situated on a bed, sofa,
rug, or similar surface that may block the ventilation openings;
or if placed in a built-in installation, such as a bookcase or cabi-
net that may impede the flow of air through the ventilation open-
ings, there should be free space of at least 20 cm (8 in.) and an
opening behind the appliance.
9. Heat – The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances (in-
cluding amplifiers) that produce heat.
10. Power Sources – The appliance should be connected to a power
supply only of the type described in the operating instructions or
as marked on the appliance.
11. Polarization – If the appliance is provided with a polarized
plug having one blade wider than the other, please read the
following information:
The polarization of the plug is a safety feature. The polarized
plug will only fit the outlet one way. If the plug does not fit
fully into the outlet, try reversing it. If there is still trouble, the
user should seek the services of a qualified electrician. Under
no circumstances should the user attempt to defeat the
polarization of the plug.
12. Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or pinched by
items placed upon or against them, especially near plugs, conve-
nience receptacles, and the point where they exit from the appli-
ance.
13. Cleaning – The appliance should be cleaned only as recom-
mended by the manufacturer.
14. Power Lines – An outdoor antenna should be located away
from power lines.
15. Nonuse Periods – The power cord of the appliance should be
unplugged from the outlet when left unused for a long period of
time.
16. Object and Liquid Entry – Care should be taken so that objects
do not fall and liquids are not spilled into the enclosure through
openings.
17. Damage Requiring Service – The appliance should be
serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the
appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or
exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
18. Servicing – The user should not attempt to service the appliance
beyond that described in the operating instructions. All other
servicing should be referred to qualified service personnel.
19. Outdoor Antenna Grounding – If an outside antenna is con-
nected to the receiver, be sure the antenna system is grounded so
as to provide some protection against voltage surges and built up
static charges. Article 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with regard to proper
grounding of the mast and supporting structure, grounding of
the lead-in wire to an antenna-discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the grounding elec-
trode. See Figure 1.
FIGURE 1:
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL
ELECTRICAL CODE
Important Safeguards
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
AVIS
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC – NATIONAL ELECTRICAL CODE
ELECTRIC
SERVICE
EQUIPMENT
GROUND
CLAMP
ANTENNA
LEAD IN
WIRE
S2898A
PORTABLE CART WARNING
S3125A
3
1. Warranty Claim
You can find the serial number on the rear panel of this unit. In case
of warranty claim, please report this number.
2. Recording Copyright
Recording of copyrighted material for other than personal use is il-
legal without permission of the copyright holder.
3. AC Fuse
The fuse is located inside the chassis and is not user-serviceable. If
power does not come on, contact your Onkyo authorized service sta-
tion.
4. Care
From time to time you should wipe the front and rear panels and the
cabinet with a soft cloth. For heavier dirt, dampen a soft cloth in a
weak solution of mild detergent and water, wring it out dry, and
wipe off the dirt. Following this, dry immediately with a clean cloth.
Do not use rough material, thinners, alcohol or other chemical sol-
vents or cloths since these could damage the finish or remove the
panel lettering.
5. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME,
READ THE FOLLOWING SECTION CAREFULLY.
The voltage of the available power supply differs according to coun-
try or region. Be sure that the power supply voltage of the area
where this unit will be used meets the required voltage (e.g., AC 230
V, 50 Hz or AC 120 V, 60 Hz) written on the rear panel.
Worldwide models are equipped with a voltage selector to conform
to local power supplies. Be sure to set this switch to match the volt-
age of the power supply in your area before plugging in the unit.
For British model
Replacement and mounting of an AC plug on the power supply cord
of this unit should be performed only by qualified service personnel.
IMPORTANT
The wires in the mains lead are coloured in accordance with the fol-
lowing code:
Blue : Neutral
Brown : Live
As the colours of the wires in the mains lead of this apparatus may
not correspond with the coloured markings identifying the terminals
in your plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal
which is marked with the letter L or coloured red.
IMPORTANT
A 5 amp fuse is fitted in this plug. Should the fuse need to be re-
placed, please ensure that the replacement fuse has a rating of 5
amps and that it is approved by ASTA or BSI to BS1362. Check for
the ASTA mark or the BSI mark on the body of the fuse.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE
SOCKET OUTLET IN YOUR HOME THEN THE FUSE
SHOULD BE REMOVED AND THE PLUG CUT OFF AND DIS-
POSED OF SAFELY. THERE IS A DANGER OF SEVERE
ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED
INTO ANY 13 AMP SOCKET.
If in any doubt, please consult a qualified electrician.
For U.S. model
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s atten-
tion to Article 820-40 of the NEC, ANSI/NFPA 70, which provides
guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
Precautions
FCC Information for User
CAUTION:
The user changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
For Canadian model
CAUTION: THIS DIGITAL APPARATUS DOES NOT EXCEED
THE CLASS B LIMITS FOR RADIO NOISE EMISSION FROM
DIGITAL APPARATUS SET OUT IN THE RADIO INTERFER-
ENCE REGULATIONS OF THE CANADIAN DEPARTMENT
OF COMMUNICATIONS.
For models having a power cord with a polarized plug:
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Modele pour les Canadien
ATTENTION: L'INTERFÉRENCE RADIO ÉLECTRIQUE
GÉNÉRÉE PAR CET APPAREIL NUMÉRIQUE DE TYPE B NE
DÉPASSE PAS LES LIMITES ÉNONCÉES DANS LE
RÈGLEMENT SUR LES PERTURBATIONS RADIO
ÉLECTRIQUES, SECTION APPAREIL NUMÉRIQUE, DU
MINISTÈRE DES COMMUNICATIONS.
Sur les modèles dont la fiche est polarisée:
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA PRISE ET
POUSSER JUSQU’AU FOND.
Declaration of Conformity
We, ONKYO EUROPE
ELECTRONICS GmbH
INDUSTRIESTRASSE 20
82110 GERMERING,
GERMANY
declare in own responsibility, that the ONKYO product described
in this instruction manual is in compliance with the corresponding
technical standards such as EN60065, EN55013, EN55020 and
EN61000-3-2, -3-3 (or EN60555-2, -3).
GERMERING, GERMANY
ONKYO EUROPE ELECTRONICS GmbH
K.OTSU
Product specificaties
| Merk: | Onkyo |
| Categorie: | Audio / video-ontvanger |
| Model: | TX-DS777 |
Heb je hulp nodig?
Als je hulp nodig hebt met Onkyo TX-DS777 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Audio / video-ontvanger Onkyo
16 Augustus 2022
16 Augustus 2022
16 Augustus 2022
17 Augustus 2022
17 Augustus 2022
16 Augustus 2022
16 Augustus 2022
16 Augustus 2022
16 Augustus 2022
16 Augustus 2022
Handleiding Audio / video-ontvanger
- Audio / video-ontvanger JVC
- Audio / video-ontvanger JBL
- Audio / video-ontvanger Kenwood
- Audio / video-ontvanger Pioneer
- Audio / video-ontvanger Yamaha
- Audio / video-ontvanger Aiwa
- Audio / video-ontvanger Denon
- Audio / video-ontvanger Eltax
- Audio / video-ontvanger Harman Kardon
- Audio / video-ontvanger Icom
- Audio / video-ontvanger Konig Electronic
- Audio / video-ontvanger Logilink
- Audio / video-ontvanger Marantz
- Audio / video-ontvanger Sherwood
- Audio / video-ontvanger Focusrit
Nieuwste handleidingen voor Audio / video-ontvanger
4 September 2023
25 Augustus 2023
25 Augustus 2023
26 Augustus 2023
26 Augustus 2023
25 Augustus 2023
26 Augustus 2023
25 Augustus 2023
26 Augustus 2023
26 Augustus 2023