Onkyo TX-DS575X Handleiding

Onkyo Receiver TX-DS575X

Lees hieronder de 📖 handleiding in het Nederlandse voor Onkyo TX-DS575X (44 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 305 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/44

Contents

Before using

Important Safeguards........................ 2

Precautions ....................................... 3

Features............................................. 4

Supplied accessories......................... 4

Before operating this unit ................. 5

Preparation

Audio equipment connections .......... 6

Video equipment connections .......... 7

Connecting other devices ................. 8

Connecting speakers....................... 10

Positioning speakers....................... 11

Connecting the power..................... 11

Making antenna connections.......... 12

Operation

Speaker setup.................................. 14

Selecting a sound source ................ 17

Using Listening Mode.................... 21

Tuning in a radio station................. 24

Using preset radio stations.............. 25

Receiving RDS broadcasts

(European models only)............... 27

Recording a source ......................... 29

Using the remote controller............ 31

Programming the remote controller

codes of other devices into the

RC-392M..................................... 34

Using a Macro function.................. 36

Appendix

Troubleshooting guide.................... 40

Speciﬁcations ................................. 41

Control guide

Control positions and names .......... 42

AV Receiver

TX-DS575X

Instruction Manual

Thank you for purchasing the Onkyo AV Receiver.

Please read this manual thoroughly before making

connections and turning on the power.

Following the instructions in this manual will enable

you to obtain optimum performance and listening

enjoyment from your new AV Receiver.

Please retain this manual for future reference.

Important Safeguards

Read Instructions

– All the safety and operating instructions

should be read before the appliance is operated.

Retain Instructions

– The safety and operating instructions

should be retained for future reference.

Heed Warnings

– All warnings on the appliance and in the

operating instructions should be adhered to.

Follow Instructions

– All operating and use instructions

should be followed.

Water and Moisture

– The appliance should not be used near

water – for example, near a bathtub, washbowl, kitchen sink,

laundry tub, in a wet basement, or near a swimming pool, and

the like.

Carts and Stands

– The appliance should be used only with a

cart or stand that is recom-

mended by the manufacturer.

6A.An appliance and cart combina-

tion should be moved with care.

Quick stops, excessive force,

and uneven surfaces may cause

the appliance and cart combina-

tion to overturn.

Wall or Ceiling Mounting

– The appliance should be mounted

to a wall or ceiling only as recommended by the manufacturer.

Ventilation

– The appliance should be situated so that its loca-

tion or position does not interfere with its proper ventilation.

For example, the appliance should not be situated on a bed,

sofa, rug, or similar surface that may block the ventilation

openings; or if placed in a built-in installation, such as a book-

case or cabinet that may impede the ﬂow of air through the

ventilation openings, there should be free space of at least 20

cm (8 in.) and an opening behind the appliance.

Heat

– The appliance should be situated away from heat

sources such as radiators, heat registers, stoves, or other appli-

ances (including ampliﬁers) that produce heat.

10.

Power Sources

–

The appliance should be connected to a

power supply only of the type described in the operating

instructions or as marked on the appliance.

11.

Polarization

– If the appliance is provided with a polarized

plug having one blade wider than the other, please read the fol-

lowing information:

The polarization of the plug is a safety feature. The polarized

plug will only ﬁt the outlet one way. If the plug does not ﬁt

fully into the outlet, try reversing it. If there is still trouble, the

user should seek the services of a qualiﬁed electrician. Under

no circumstances should the user attempt to defeat the polar-

ization of the plug.

12.

Power-Cord Protection

– Power-supply cords should be

routed so that they are not likely to be walked on or pinched by

items placed upon or against them, especially near plugs, con-

venience receptacles, and the point where they exit from the

appliance.

13.

Cleaning

– The appliance should be cleaned only as recom-

mended by the manufacturer.

14.

Power Lines

– An outdoor antenna should be located away

from power lines.

15.

Nonuse Periods

– The power cord of the appliance should be

unplugged from the outlet when left unused for a long period

of time.

16.

Object and Liquid Entry

– Care should be taken so that

objects do not fall and liquids are not spilled into the enclosure

through openings.

17.

Damage Requiring Service

– The appliance should be ser-

viced by qualiﬁed service personnel when:

A. The power-supply cord or the plug has been damaged; or

B. Objects have fallen, or liquid has been spilled into the

appliance; or

C. The appliance has been exposed to rain; or

D. The appliance does not appear to operate normally or

exhibits a marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

18.

Servicing

– The user should not attempt to service the appli-

ance beyond that described in the operating instructions. All

other servicing should be referred to qualiﬁed service person-

nel.

19.

Outdoor Antenna Grounding

– If an outside antenna is con-

nected to the receiver, be sure the antenna system is grounded

so as to provide some protection against voltage surges and

built up static charges. Article 810 of the National Electrical

Code, ANSI/NFPA 70, provides information with regard to

proper grounding of the mast and supporting structure, ground-

ing of the lead-in wire to an antenna-discharge unit, size of

grounding conductors, location of antenna-discharge unit, con-

nection to grounding electrodes, and requirements for the

grounding electrode. See Figure 1.

FIGURE 1:

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL

ELECTRICAL CODE

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The lightning ﬂash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may be of

suﬀicient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

AVIS

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC – NATIONAL ELECTRICAL CODE

ELECTRIC

SERVICE

EQUIPMENT

GROUND

CLAMP

ANTENNA

LEAD IN

WIRE

S2898A

PORTABLE CART WARNING

S3125A

Precautions

1. Warranty Claim

You can ﬁnd the serial number on the rear panel of this unit. In case

of warranty claim, please report this number.

2. Recording Copyright

Recording of copyrighted material for other than personal use is

illegal without permission of the copyright holder.

3. AC Fuse

The fuse is located inside the chassis and is not user-serviceable. If

power does not come on, contact your Onkyo authorized service

station.

4. Care

From time to time you should wipe the front and rear panels and the

cabinet with a soft cloth. For heavier dirt, dampen a soft cloth in a

weak solution of mild detergent and water, wring it out dry, and

wipe off the dirt. Following this, dry immediately with a clean cloth.

Do not use rough material, thinners, alcohol or other chemical sol-

vents or cloths since these could damage the ﬁnish or remove the

panel lettering.

5. Power

WARNING

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME,

READ THE FOLLOWING SECTION CAREFULLY.

The voltage of the available power supply differs according to

country or region. Be sure that the power supply voltage of the area

where this unit will be used meets the required voltage (e.g., AC

230 V, 50 Hz or AC 120 V, 60 Hz) written on the rear panel.

Worldwide models are equipped with a voltage selector to conform

to local power supplies. Be sure to set this switch to match the volt-

age of the power supply in your area before plugging in the unit.

For British model

Replacement and mounting of an AC plug on the power supply cord

of this unit should be performed only by qualiﬁed service personnel.

IMPORTANT

The wires in the mains lead are coloured in accordance with the

following code:

Blue : Neutral

Brown : Live

As the colours of the wires in the mains lead of this apparatus may

not correspond with the coloured markings identifying the termi-

nals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal

which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the termi-

nal which is marked with the letter L or coloured red.

IMPORTANT

A 5 amp fuse is ﬁtted in this plug. Should the fuse need to be

replaced, please ensure that the replacement fuse has a rating of 5

amps and that it is approved by ASTA or BSI to BS1362. Check for

the ASTA mark or the BSI mark on the body of the fuse.

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE

SOCKET OUTLET IN YOUR HOME THEN THE FUSE

SHOULD BE REMOVED AND THE PLUG CUT OFF AND

DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE

ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED

INTO ANY 13 AMP SOCKET.

If in any doubt, please consult a qualiﬁed electrician.

For U.S. model

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s

attention to Article 820-40 of the NEC, ANSI/NFPA 70, which pro-

vides guidelines for proper grounding and, in particular, speciﬁes

that the cable ground shall be connected to the grounding system of

the building, as close to the point of cable entry as practical.

FCC Information for User

CAUTION:

The user changes or modiﬁcations not expressly approved by the

party responsible for compliance could void the user’s authority to

operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or televi-

sion reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit dierent from

that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

For Canadian model

NOTE:

THIS CLASS B DIGITAL APPARATUS COMPLIES WITH

CANADIAN ICES-003.

For models having a power cord with a polarized plug:

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH

WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

Modele pour les Canadien

REMARQUE:

CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CON-

FORME À LA NORME NMB-003 DU CANADA.

Sur les modèles dont la ﬁche est polarisée:

ATTENTION: POUR ÉVITER LES CHOCS ÉLEC-

TRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA

FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE

ET POUSSER JUSQU’AU FOND.

Declaration of Conformity

We, ONKYO EUROPE

ELECTRONICS GmbH

INDUSTRIESTRASSE 20

82110 GERMERING,

GERMANY

GERMERING, GERMANY

ONKYO EUROPE ELECTRONICS GmbH

A.HORIUCHI

declare in own responsibility, that the ONKYO product described

in this instruction manual is in compliance with the corresponding

technical standards such as EN60065, and EN55013, EN55020

EN61000-3-2, -3-3 (or EN60555-2, -3)

Product specificaties

Merk:	Onkyo
Categorie:	Receiver
Model:	TX-DS575X

Heb je hulp nodig?

Als je hulp nodig hebt met Onkyo TX-DS575X stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Receiver Onkyo

Onkyo TX-SR393DAB Handleiding

19 Juni 2023

Onkyo R-805X Handleiding

2 Juni 2023

Onkyo R-805TX Handleiding

1 Juni 2023

Onkyo TX8250B Handleiding

28 Mei 2023

Onkyo DAC-HA200(B) Handleiding

21 Mei 2023

Onkyo TX-RZ920 Handleiding

14 Mei 2023

Onkyo TX-RZ630 Handleiding

12 Mei 2023

Onkyo TX-SR705 Handleiding

10 Mei 2023

Onkyo TX-RZ610 Handleiding

30 April 2023

Onkyo A-1VL Handleiding

20 April 2023

Handleiding Receiver

Nieuwste handleidingen voor Receiver

DAP Audio TA-4.3400 Handleiding

21 December 2024

Devialet Astra Dual Handleiding

19 December 2024

Devialet Astra Handleiding

19 December 2024

Atlas Sound T112 Handleiding

18 December 2024

Atlas Sound AL2430 Handleiding

18 December 2024

Atlas Sound AP-S15 Handleiding

18 December 2024

Atlas Sound AP-S15L Handleiding

18 December 2024

Atlas Sound AA-GPN1200 Handleiding

18 December 2024

Atlas Sound AA35 Handleiding

18 December 2024

Atlas Sound PA702 Handleiding

18 December 2024