One For All URC7955 Handleiding

One For All Afstandsbediening URC7955

Lees hieronder de 📖 handleiding in het Nederlandse voor One For All URC7955 (2 pagina's) in de categorie Afstandsbediening. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

A  SIMPLESET

SimpleSet is a quick and easy way of setting up the remote to control the most popular

brands of each device type with only a few key presses, typically in under a minute per

device. The ﬁ rst step is to select which device you are going to set up. The following is a list

of Device Modes on the remote control, and the Device types that can be set up on that

mode:

Device Mode Type of device

TV TV, HDTV, LED, LCD, Plasma, Projector

STB Set Top Box, Satellite Receiver, Cable

Converter, Freeview, DVB-T, IPTV

BLU Blu-ray, DVD, DVD Home Cinema, VCR,

Laser Disk

MEDIA Digital Media Receiver, Streamer, Game

Console*

AUD Audio, AV Receiver, Ampliﬁ er, Tuner, Sound

Bar, Active Speaker System

* The One For All remote can only control games consoles operated by Infra-Red, either

directly or via an adapter. Consoles that are controlled by Bluetooth only cannot be

operated.

For each Device type, there is a list of the top brands, each with a number assigned to it,

for example 6 for a Samsung TV. Locate your device and brand in the list that follows:

To set up your device

1. Turn on your device (not on standby) and point the OFA remote towards it.

2. Hold down MAGIC until the LED under the device blinks twice.

The LED under the current mode will stay lit.

3. Press the DEVICES key repeatedly until the LED for the device you

want to set up is lit.

4. Hold down the digit for your brand and device as listed above

(e.g. 6 for Samsung TV).

5. The remote will send Power every 3 seconds until your device switches oﬀ .

6. As soon as your device switches o ﬀ , release the digit.

7. The LED will blink twice and go out. The remote should now operate

your device.

* If you ﬁ nd one or more keys do not work as you expect, start again at step 1 – the remote will start with the next

code in the memory.

B  SET UP BY CODE

If your brand is not listed in section A, you can set up your device by trying codes

individually. To do this:

1. Turn your device on (not on standby).

2. Locate the brand of your device in the code list (pages 160-176).

Codes are listed by Device Type and Brand.

3. Hold down MAGIC until the LED under the device blinks twice.

The LED under the current mode will stay lit.

4. Press the DEVICES key repeatedly until the LED for the device you

want to set up is lit.

5. Enter the ﬁ rst 4 digit code listed for your brand (e.g. 0556 for a

Bennett TV).

6. The LED will blink twice and go out.

7. Now aim the remote towards your device and press the POWER key.

8. If the device turns oﬀ , your remote is ready to use. If not, repeat steps 3-7

with the next code in the list.

* Some codes are quite similar. If you ﬁ nd that one or more keys do not operate as you expect, try again from step 3

with the next code in the list.

Thank you for purchasing the One For All Smart Control.

Now you can control all of your Audio/Video devices with a single remote, while enjoying

extra features such as the ability to combine devices in a single Activity Mode, sending

multiple commands on a single key press (macros) and being able to customise the

remote control to your exact requirements.

There is also a handy companion app for iPhone and Android phones which will allow

you to keep your remote up to date with the latest devices and codes. It also oﬀ ers you an

alternative way to set up your remote and store the settings.

To get started with your new remote, the ﬁ rst step is to set it up to control all of your

Home Cinema devices.

A  SIMPLESET A  SIMPLESET

1 Alba / Bush / Goodmans

2 Grundig

3 LG

4 Panasonic

5 Philips

6 Samsung

7 Sharp

8 Sony

9 TCL / Thomson

0 Toshiba

1 BSkyB / Sky Ireland /

Orange

2 Canal+ / CanalSat / Digital+

3 Dream Multimedia /

TechniSat

4 DStv / Multichoice / Foxtel /

Sky New Zealand

5 freebox / Tricolor TV / Vu+

6 Humax

7 Samsung

8 Sky Italia / SFR / Neuf TV

9 Sky Deutschland / Österreich /

T-Home / Deutsche Telekom

0 UPC / Cablecom / UPC Direct /

Virgin Media

BLU – Blu-ray, DVD

1 Denon

2 Harman/Kardon

3 JVC / LG

4 Marantz / Philips

5 Onkyo

6 Panasonic / Technics

7 Pioneer

8 Samsung

9 Sony

0 Yamaha

STB – Sat, Cable, DVB-T

1 Denon, Harman/Kardon

2 JVC

3 LG

4 Panasonic

5 Philips

6 Pioneer

7 Samsung

8 Sony

9 Toshiba

0 Yamaha

AUD – AV Receiver, Amp, Tuner,

Sound Bar, Speaker Systems

MEDIA – Games Consoles (5 & 8),

Media Players

1 Apple

2 Asus

3 Dune

4 Emtec / A.C.Ryan / DVICO /

Fantec / iconBIT / iNext

5 Microsoft

6 Popcorn Hour / Philips

7 Roku / Sky Austria / Sky

Deutschland / Sky Ireland /

Sky UK

8 Sony

9 Sumvision

0 Western Digital

HOW TO SET UP YOUR REMOTE

HOW TO SET UP YOUR REMOTE HOW TO SET UP YOUR REMOTE HOW TO SET UP YOUR REMOTE

URC 7955

ENGLISH SIMPLE SET UP GUIDE

WELCOME, PREPARE YOUR

REMOTE FOR INSTALLATION

Open the battery door.

Insert 4 AAA batteries.

URC7955

RDN-1080716

710834

ENGLISH

PRODUCT DISPOSAL

EUROPEAN DIRECTIVE 2002/96/EC

The crossed out wheeled bin symbol on this product

ensures that this product is manufactured using high

quality components that can be recycled and reused

according to European Directive 2002/96/EC. Please do

not dispose this product with your normal household

waste but inform yourself about the local separate

collection for electrical and electronic products to

dispose this product correctly. This will help preventing

potential negative eﬀ ects on the environment and/or

human health.

BATTERY DISPOSAL AND SAFETY

EUROPEAN DIRECTIVE 2006/66/EC

Please do not dispose your batteries with your normal

household waste but inform yourself about the local

separate collection for empty batteries to dispose them

correctly. This will help preventing potential negative

eﬀ ects on the environment and/or human health.

Keep batteries away from ﬁ re, out of direct sunlight, and

away from other sources of heat.

UNIVERSAL ELECTRONICS INC/ONE FOR ALL warrants to

the original purchaser that this product will be free from

defects in materials and workmanship under normal

and correct use for a period of one (1) year from the date

of original purchase. This product will be replaced free

of charge if it has been proven to be defective within

the one (1) year warranty period. This warranty does not

cover cartons, carrying cases, batteries, broken or marred

cabinets or any other item used in connection with the

product. Any further obligation than listed above is ex-

cluded. Please notice that p1-we need your purchase receipt

so that p1-we may establish your eligibility for service. If

you have bought this product for purposes which are

not related to your trade, business or profession, please

remember that you may have legal rights under your

national legislation governing the sale of consumer

goods. This guarantee does not aﬀ ect those rights.

www.oneforall.com

Ireland

www.oneforall.com

South Africa

0861100551

support@oneforall.co.za

www.connoisseur.co.za

www.oneforall.com

New Zealand

0800 1425569

sales@amber.co.nz

www.amber.co.nz

www.oneforall.com

Australia

1 300 888 298

ofa.support@ambertech.com.au

www.ambertech.com.au

www.oneforall.com

Universal Electronics BV –

Europe & International

P.O. Box 3332, 7500 DH Enschede

The Netherlands

KEY TABLE

DEVICES – Scroll through

the devices your remote

is set up to control MAGIC – Used to set up

your remote

POWER – Power on/o

INFO – Displays info of

current playback

FAV –

Favourite Channels

BACK – Back one step

in the Menu of the

current device

ACTIVITY – Scrolls

through up to 3

Activity Modes –

Watch TV, Watch

Movie and Listen to

Music . See Activities

for details.

EXIT – Exit from the

Menu of the current

device

VOL – Volume Up, Down

and Mute

MENU – Shows the menu

of the current device

GUIDE – TV Guide, EPG

SMART – Access internet

and Smart features of

your TV or internet-

connected device

+/- – Channel Up and

Down

PP – Previous

Program, Last Channel

Red, Green, Yellow,

Blue – Fastext/Quick

access keys

PLAYBACK – Playback

keys for the current

device

NETTV – Access TV

Streaming - See Net TV

Feature

LIST – Displays a list of

recorded programmes

AV – Select the input on

the current device

Your One For All remote control can learn any function from any other working remote

control. This can be useful if you are missing one or more functions from your original

remote control and would like to add them to the Smart Control. You can learn onto any

key except Magic, Devices or Activity.

You can also learn a complete device if you can’t ﬁnd a code.

To learn, ﬁrstly make sure you have all your original remote controls to hand, and that they

have working batteries in. To learn functions, the original remote should be

approximately 3cm from the OFA remote, pointing towards it as shown below:

1. Hold down MAGIC until the LED under the device blinks twice. The LED

under the current mode will stay lit.

2. Using the DEVICES key, make sure the LED for the device you want to learn

functions on is lit.

3. Press 975 – the LED will blink twice.

4. Press and release the key you want to learn a function onto (for example

the FAV key) – The Watch TV and Listen To Music LEDs will light up.

5. Press and release the key on the original remote.

6. The LED under the device will blink twice to indicate the key has been learned correctly.

7. Repeat steps 4 and 5 for each key you want to learn – remember you can learn from multiple

remotes, but only one function per key.

8. When you have learned all the functions you require, press and hold the

MAGIC key until the LED blinks twice and turns oﬀ.

Hints

• If the LEDs shows one long blink at step 6, the function was not learned correctly, please try again

from step 4.

• If you ﬁnd one or more keys don’t work properly after set up, you can re-enter the learning mode

at any time by repeating the procedure from step 1.

If you always use one device to control volume, for example your TV or an AV Receiver, you

can set up the Smart Control to always control that device, regardless of which device your

remote is controlling.

To do this:

1. Hold down MAGIC until the LED under the device blinks twice. The LED under the

current mode will stay lit.

2. Press 993 – the LED will blink twice.

3. Use the DEVICES key to select the Device you want to lock the Volume to.

4. Press MAGIC once – the LED will blink twice and volume is now locked.

To unlock the volume and set every device back to controlling its own volume, the

procedure is:

1. Hold down MAGIC until the LED under the device blinks twice.

The LED under the current mode will stay lit.

2. Press 993 – the LED will blink twice.

3. Press VOLUME UP – the LED will blink four times and Volume is now unlocked.

Please note that Volume Lock only applies in Device Mode – Activities are unaﬀected.

2. Press 995 – the LED will blink twice.

3. Next select the key you want to program the Macro on.

4. Now use the DEVICES key to select the device you want the ﬁrst

function of the Macro to come from, for example TV.

5. Next, press the key you want to include in the Macro, for example

the AV key.

6. Repeat steps 4 (if necessary), and 5 to add more keys to the Macro. You can include up

to 15 key presses.

7. To store the Macro, hold down the MAGIC key until the LED blinks

twice.

* Remember to press the keys in the same order you would using your original remotes – so if you pressed AV on the TV

remote and then Play on the Blu-ray remote to watch a movie, do it in the same order on the Smart Control.

* If the LED shows a long blink when you press a key in steps 4 or 5, you have entered too many keys, please try again.

TO DELETE A MACRO

If you want to remove a macro from a key, please perform the following:

1. Hold down MAGIC until the LED under the device blinks twice.

The LED under the current mode will stay lit.

2. Press 995 – the LED will blink twice.

3. Press the key the macro is programmed on.

4. Now hold down the MAGIC key until the LED blinks twice –

the Macro is deleted.

PROGRAM A MACRO

You can program any key on your OFA remote (except Magic and Devices) to send

multiple commands on a single press –a Macro. This can be useful for controlling multiple

devices to put them in a certain state – for instance you could put your TV on HDMI 1

and press Play on the Blu-ray player to start watching a movie. A key programmed with a

Macro will send the same Macro regardless of the device mode, so it is best to select a key

you don’t use.

To program a macro, the procedure is as follows:

1. Hold down MAGIC until the LED under the device blinks twice.

The LED under the current mode will stay lit.

The Smart Control features a “NETTV” key for viewing digital TV, streamed over the inter-

net. If your original remote control already had a key for this - for example many newer TVs

have a Netﬂix key - then this key will perform exactly the same as the key on your original

remote. However if you did not have a key like this, but still had the ability to watch a

streaming service, you can use this key as a shortcut by programming a macro on it. Most

AV devices which are connected to the internet, such as Smart TVs or streaming Set Top

Boxes have one or more applications they can run to access TV viewing via the internet.

Examples of these would be Netﬂix, YouTube, Amazon Prime, BBC iPlayer or similar.

To program the macro, you ﬁrst need to know the device you use to access the service,

and then the sequence of keys you need to press to always bring up the service you prefer,

For example, some Panasonic TVs will start Netﬂix by pressing the Apps key, then Menu

Down Twice, and ﬁnally the OK key. Or on an Apple TV, the sequence is Menu, Menu Down

and OK.

Once you have determined the sequence for your device, follow these steps:

1. Sit in front of your device with It switched on (not on standby)

2. Hold down the NETTV key until the LED blinks twice and stays lit

3. Use the DEVICES key to select the device you want to use for the

NETTV macro (e.g. TV)

4. Now perform the sequence of keys exactly as would normally. The

remote will operate your device and the macro is recorded in real

time - so if it normally takes a few seconds for your device to react

don’t worry.

5. One you have ﬁnished the sequence - and the Streaming Service

has started on your device - hold down the NETTV key until the LED

blinks twice and goes out. The macro is now stored.

Tips

• Make sure the Smart Control Is operating the device in question before programming

• If you ﬁnd the Macro doesn’t work as expected, you can just repeat the same

sequence to reprogram

• When programming, wait for your device to respond ﬁrst, the remote will remember

the timing

• The NETTV macro is tied to one device, remember to make sure you are watching the

correct device.

MACROS ON ACTIVITIES

Another handy feature of the Smart Control is to put Macros on Activities; you could for

example program the Watch TV Activity to send a Macro to turn on the TV and Set Top

Box when selected. To do this, simply use the Activity key to select the Activity in step 3 of

the procedure “Program a Macro”. Next time you use the Activity, the Macro will be sent 3

seconds after you select it using the Activity key.

If you want to delete a Macro from the Activity, select it during step 3 of “To Delete a

Macro”.

Your One For All Smart Control contains codes for all popular devices and brands, but new

codes are added to our online database every day. Using the One For All App on

your iPhone or Android phone will allow you to upgrade any new codes into your

remote using Bluetooth Smart, also known as Bluetooth Low Energy*. This will ensure that

the remote will never become obsolete. You can also use the app to set up all devices,

giving you the ability to enter the model numbers of your equipment to get the right code

ﬁrst time. It can also help with selecting the right inputs for your Activities. *

* Dependent on device and commands available.

If you would like to download the app, follow the links below:

* Please ensure your phone is compatible with Bluetooth Smart. A list can be found by scanning the QR code above.

Universal Electronics, declares that this product is in compliance with the essential requirements and other relevant

provisions of Directive 1999/5/EC.

A copy of the EC declaration of Conformity is available at http://www.oneforall.com/DOC_URC7955

One For All is a registered trademark of Universal Electronics B.V.

P.O. Box 3332, 7500 DH, Enschede, The Netherlands

LEARNING MACROS

MACROS

THE NETTV FEATURE

VOLUME LOCK THE NETTV FEATURE

THE OFA APP

www.ofa.com/smartcontrol

An Activity is a grouping of two or more devices into a single mode based upon what

you’re doing while using your remote - for example TV and Set Top Box can be combined

together into a Watch TV mode. In this mode keys will control only the relevant device, so

in this example the Volume keys would control the TV, but the channel keys would control

the Set Top Box.

The OFA Smart Control features 3 Activity Modes; Watch TV, Watch Movie and Listen To

Music. Each of these modes has a choice of devices to combine.

These are:

WATCH TV

Combination 1: TV + STB (Default)

Combination 2: TV + STB + AUD

Combination 3: TV + AUD

WATCH MOVIE

Combination 1: TV + BLU (Default)

Combination 2: TV + BLU + AUD

Combination 3: TV + MEDIA

Combination 4: TV + MEDIA + AUD

LISTEN TO MUSIC

Combination 1: TV + AUD + MEDIA (Default)

Combination 2: AUD + BLU

Combination 3: AUD only

TO DELETE A LEARNED FUNCTION, THE PROCEDURE IS:

1. Hold down MAGIC until the LED under the device blinks twice.

The LED under the current mode will stay lit.

2. Using the DEVICES key, make sure the LED for the device you want

to delete functions from is lit.

3. Press 976 – the LED will blink twice.

4. Press the key to delete twice – the LED will blink twice.

Repeat the above procedure for each key you want to delete.

If you set up the default devices for any Activity on the remote (for example a TV and STB

for Watch TV) that Activity will be set up automatically on the remote. If you would like to

change to a diﬀerent combination, the procedure is as follows:

1. Hold down MAGIC until the LED under the device blinks twice.

The LED under the current mode will stay lit.

2. Use the ACTIVITY key to scroll through the Activities until the

one you want to set is ﬂashing.

3. Press the number of the combination you want to set – e.g 2

for TV + STB + AUD in Watch TV.

4. The LED will blink twice and go out.

To access the Activities, simply press the ACTIVITY key to scroll through until the desired

one is lit. You can return to controlling by device by using the DEVICES key.

AV Shift

As the AV key is intended to select the input on your TV and most TVs use a menu to select

from a list of inputs, when the AV key is pressed in an Activity, the Menu Up, Down, Left,

Right and OK keys temporarily control the TV. If the OK key is pressed, or no key is pressed

for ten seconds, these keys will revert to controlling the relevant device for the Activity

(e.g. STB in Watch TV Mode).

Power Macro

If you hold down the Power key for 2 seconds in any Activity, the remote will send the

Power function for each device contained within that Activity. So for example, holding

Power in the default setting for Watch TV will turn both the TV and Set Top Box on or oﬀ.

LEARNING

ACTIVITIES

2 - 5 CM

GUI DE

Product specificaties

Merk:	One For All
Categorie:	Afstandsbediening
Model:	URC7955
Kleur van het product:	Zwart
Ingebouwd display:	Nee
Gewicht:	9 g
Breedte:	45 mm
Diepte:	21 mm
Hoogte:	216 mm
Gewicht verpakking:	430 g
Breedte verpakking:	14.8 mm
Diepte verpakking:	3.9 mm
Hoogte verpakking:	31.8 mm
Gebruikershandleiding:	Ja
Type verpakking:	Doos
Snelstartgids:	Ja
Land van herkomst:	China
Pakketgewicht:	0.43 kg
Ondersteund aantal accu's/batterijen:	4
Interface:	IR Draadloos
Ingebouwde microfoon:	Nee
Nettogewicht:	9 g
Aantal per verpakking:	1 stuk(s)
Teletext:	Ja
Maximumbereik:	- m
Backlight toetsen:	Nee
Ingebouwde accu:	Nee
Oplaadbaar:	Nee
Verpakkingsinhoud:	Smart Control 5\nUser manual
Compatibiliteit:	TV, Set Top Box (Sat/Cable/Freeview), DVD/Blu-ray, Sound bar, Audio devices and Media Streamer (e.g. Apple TV)
Input type:	Drukknopen
juiste gebruik afstandsbediening:	Audio, CABLE, DTT, DVD/Blu-ray, Game console, Home cinema system, IPTV, Media player, SAT, STB, TNT, TV, TV set-top box
Batterijen inbegrepen:	Nee
Type batterij:	AAA
Spraakbesturing:	Nee
Number of devices supported:	5
Functie voor kopieertoets:	Ja
Gebruiksgemak:	Free setup app, Learning feature, Smart Activities.