One For All Evolve 4 Handleiding

One For All Afstandsbediening Evolve 4

Lees hieronder de 📖 handleiding in het Nederlandse voor One For All Evolve 4 (2 pagina's) in de categorie Afstandsbediening. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

ESPAÑOL

B  SET UP BY CODE

HOW TO SET UP YOUR REMOTE

If your brand is not listed in section A, you can set up your device by trying codes individually.

To do this:

1. Turn your device on (not on standby).

2. Locate the brand of your device in the code list (pages 126-137). Codes

are listed by Device Type and Brand.

3. Hold down MAGIC until the LED under the device blinks twice. The LED

under the current device will stay lit.

4. Press the MODE key repeatedly until the LED for the device you want to

set up is lit.

5. Enter the ﬁrst 4 digit code listed for your brand (e.g. 0556 for a Bennett

TV).

6. The LED will blink twice and go out.

7. Now aim the remote towards your device and press the POWER key.

8. If the device turns oﬀ, your remote is ready to use. If not, repeat steps 3-7 with the next code

in the list.

• Some codes are quite similar. If you ﬁnd that one or more keys do not operate as you expect,

try again from step 3 with the next code in the list.

ESPAÑOL

URC7145

SIMPLE SET UP GUIDE

ENGLISH

Open the battery door.

Insert 2 AAA batteries.

ENGLISH

KEY TABLE

Thank you for purchasing the One For All 4. Now you can control all of your Audio/Video

devices with a single remote, while enjoying extra features such as the ability to combine devices

in a single Activity Mode, sending multiple commands on a single key press (macros) and being

able to customise the remote control to your exact requirements.

To get started with your new remote, the ﬁrst step is to set it up to control all of your

Home Cinema devices.

HOW TO SET UP YOUR REMOTE

A – SIMPLESET

SimpleSet is a quick and easy way of setting up the remote to control the most popular brands of

each device type with only a few key presses, typically in under a minute per device. The ﬁrst step

is to select which device you are going to set up. The following is a list of Device Modes on the

remote control, and the Device types that can be set up on that mode:

Device Mode Type of device

TV TV, HDTV, LED, LCD, Plasma, Projector

STB Set Top Box, Satellite Receiver, Cable Converter,

Freeview, DVB-T, IPTV

BLU Blu-ray, DVD, DVD Home Cinema

AUD Audio, AV Receiver, Ampliﬁer, Tuner, Sound Bar

For each Device type, there is a list of the top brands, each with a number assigned to it,

for example 6 for a Samsung TV. Locate your device and brand in the list that follows:

1Alba / Bush / Goodmans

2Grundig

3LG

4Panasonic

5Philips

6Samsung

7Sharp

8Sony

9TCL / Thomson

0Toshiba

STB: Sat, Cable, DVB-T

1BSkyB / Sky Ireland / Orange

2Canal+ / CanalSat / Digital+

3Dream Multimedia / TechniSat

4DStv / Multichoice / Foxtel / Sky New

Zealand

5Freebox / Tricolor TV / Vu+

6Humax

7Samsung

8Sky Italia / SFR / Neuf TV

9Sky Deutschland / Österreich /

T-Home / Deutsche Telekom

0UPC / Cablecom / UPC Direct /

Virgin Media

MAGIC: Used to set up

your remote

+/-: Channel Up and Down

MENU: Show the menu of

the current device

EXIT: Exit from the Menu of

the current device

AV: Select the input on

the current device

INFO: Displays info of

current playback

POWER:

Power on/oﬀ

WATCH MOVIE: Combines 2 or

more devices into one mode

for movie viewing

PP: Previous Program, Last

Channel

3D: Access 3D functionality if

applicable

Red, Green, Yellow, Blue –

Fastext/Quick access keys

PLAYBACK: Playback keys

for the current device

MODE: Scroll through

the devices your remote is

set up to control

WATCH TV: Combines 2 or

more devices into one mode

for TV viewing

FAV: Favourite Channels

GUIDE: TV Guide, EPG

SMART: Access internet

and Smart features

of your TV or internet-

connected device

BACK: Back one step in

the Menu of the current device

VOL: Volume Up, Down and

Mute

16:9: Adjust the Aspect

Ratio (screen size) of your TV

or Set Top Box

LIST: Displays a list of

recorded programmes

A – SIMPLESET

HOW TO SET UP YOUR REMOTE

BLU: Blu-ray, DVD

1Denon, Harman/Kardon

2JVC

3LG

4Panasonic

5Philips

6Pioneer

7Samsung

8Sony

9Toshiba

0Yamaha

To set up your device

1. Turn on your device (not on standby) and point the OFA remote towards it.

2. Hold down MAGIC until the LED under the device blinks twice. The LED

under the current device will stay lit.

3. Press the MODE key repeatedly until the LED for the device you want to

set up is lit.

4. Hold down the digit for your brand and device as listed above (e.g. 6 for

Samsung TV).

5. The remote will send Power every 3 seconds until your device switches oﬀ.

6. As soon as your device switches oﬀ, release the digit.

7. The LED will blink twice and go out. The remote should now operate your device.

• If you ﬁnd one or more keys do not work as you expect, start again at step 1 – the remote will

start with the next code in the memory.

AUD: AV Receiver, Amp, Tuner, Sound Bar

1Denon

2Harman/Kardon / JBL

3LG / JVC

4Onkyo

5Panasonic / Technics

6Philips / Marantz

7Pioneer

8Samsung

9Sony

0Yamaha

Evolve_4_QSG_UK_URC7145_710813_PRINT_Opmaak 1 20-05-16 16:21 Pagina 1

LEARNING

Your One For All remote control can learn any function from any other working remote control.

This can be useful if you are missing one or more functions from your original remote control and

would like to add them to the ONE FOR ALL. You can learn onto any key except MAGIC or MODE.

You can also learn a complete device if you can’t ﬁnd a code.

To learn, ﬁrstly make sure you have all your original remote controls to hand, and that they have

working batteries in. To learn functions, the original remote should be approximately 3cm from

the OFA remote, pointing towards it as shown below:

1. Hold down MAGIC until the LED under the device blinks twice. The LED

under the current device will stay lit.

2. Press the MODE key repeatedly until the LED for the device you want to

learn functions on is lit.

3. Press 975 – the LED will blink twice.

4. Press and release the key you want to learn a function onto (for example

the 3D key) – The red LED will blink continuously.

5. Press and release the key on the original remote.

6. The LED will blink twice to indicate the key has been learned correctly.

7. Repeat steps 4 and 5 for each key you want to learn – remember you can learn from multiple

remotes, but only one function per key.

8. When you learned all the functions you require, press and hold the

MAGIC key until the LED blinks twice and turns oﬀ.

HINTS

• If the LEDs shows one long blink at step 6, the function was not learned correctly, please try

again from step 4.

• If you ﬁnd one or more keys don’t work properly after set up, you can re-enter the learning

mode at any time by repeating the procedure from step 1.

TO DELETE A LEARNED FUNCTION, THE PROCEDURE IS:

1. Hold down MAGIC until the LED under the TV key blinks twice. The LED under the current

mode key will stay lit.

2. Using the MODE key, make sure the LED for the device you want to delete functions

from is lit.

3. Press 976 – the LED will blink twice

4. Press the key to delete twice – the LED will blink twice.

Repeat the above procedure for each key you want to delete.

2 - 5 CM

ACTIVITIES

Watch TV

Combination 1: TV + STB

Combination 2: TV + STB + AUD

Combination 3: TV + AUD

Combination 4: TV only

Watch Movie

Combination 1: TV + BLU

Combination 2: TV + BLU + AUD

Combination 3: TV + AUD

Combination 4: TV only

An Activity is a grouping of two or more devices into a single mode based upon what you’re

doing while using you remote, for example TV and Set Top Box can be combined together into a

Watch TV mode. In this mode keys will control only the relevant device, so in this example the

Volume keys would control the TV, but the channel keys would control the Set Top Box.

The ONE FOR ALL features 2 Activity Modes; Watch TV and Watch Movie. Each of these modes has

a choice of devices to combine. These are:

If you set the default devices for any Activity on the remote (for example a TV and STB for Watch

TV) that Activity will be set up automatically on the remote. If you would like to change to

a diﬀerent combination, the procedure is as follows:

1. Hold down MAGIC until the LED under the device blinks twice. The LED

under the current device will stay lit.

2. Press the Activity key you want to set up (e.g. Watch TV).

3. Press the number of the combination you want to set – e.g 3 For TV +

AUD in Watch TV.

4. The LED will blink twice and go out.

To access the Activities, simply press the ACTIVITY key. You can return to controlling by device by

using the MODE key.

AV Shift

As the AV key is intended to select the input on your TV and most TVs use a menu to select from a

list of inputs, when the AV key is pressed in an Activity, the Menu Up, Down, Left, Right and OK

keys temporarily control the TV. If the OK key is pressed, or no key is pressed for ten seconds,

these keys will revert to controlling the relevant device for the Activity (e.g. STB in Watch TV

Mode).

Power Macro

If you hold down the Power key for 2 seconds in any Activity, the remote will send the Power

function for each device contained within that Activity. So for example, holding Power in the

default setting for Watch TV will turn both the TV and Set Top Box on or oﬀ.

MACROS

PROGRAM A MACRO

You can program any key on your OFA remote (except MAGIC or MODE) to send multiple

commands on a single press –a Macro. This can be useful for controlling multiple devices to put

them in a certain state – for instance you could put your TV on HDMI 1 and press Play on the

Blu-ray player to start watching a movie. A key programmed with a Macro will send the same

Macro regardless of the device mode.

To program a macro, the procedure is as follows:

1. Hold down MAGIC until the LED under the device blinks twice.

The LED under the current device will stay lit.

2. Press 995 – the LED will blink twice.

3. Next select the key you want to program the Macro on.

4. Now use the MODE key to select the device you want the ﬁrst function

of the Macro to come from, for example TV.

5. Next, press the key you want to include in the Macro, for example the

AV key.

6. Repeat steps 4 (if necessary) and 5 to add more keys to the Macro. You can include up to 15

key presses .

7. To store the Macro, hold down the MAGIC key until the LED blinks twice.

• Remember to press the keys in the same order you would using your original remotes – so if

you pressed AV on the TV remote and then Play on the Blu-ray remote to watch a movie, do

it in the same order on the One For All remote.

• If the LED shows a long blink when you press a key in steps 4 or 5, you have entered too

many keys, please try again.

DELETING A MACRO

If you want to remove a macro from a key, please perform the following:

1. Hold down MAGIC until the LED under the device blinks twice. The LED

under the current device will stay lit.

2. Press 995 – the LED will blink twice.

3. Press the key the macro is programmed on.

4. Now hold down the MAGIC key until the LED blinks twice – the Macro is

deleted.

MACROS

MACROS ON ACTIVITIES

Another handy feature of the ONE FOR ALL is to put Macros on Activities; you could for example

program the Watch TV Activity to send a Macro to turn on the TV and Set Top Box when selected.

To do this, simply press the desired Activity key (e.g. Watch TV) step 3 of the procedure “Program a

Macro”.

If you want to delete a Macro from the Activity, select it during step 3 of “Deleting a Macro”.

If you always use one device to control volume, for example your TV or an AV Receiver, you can

set up the One For All to always control that device, regardless of which device your remote is

controlling. To do this:

1. Hold down MAGIC until the LED under the device blinks twice. The LED under the current

device will stay lit.

2. Press 993 – the LED will blink twice.

3. Use the MODE key to select the Device you want to lock the Volume to.

4. Press MAGIC once – the LED will blink twice and volume is now locked.

If there is one particular device you would like to exclude from the Volume Lock (and control its

own volume), you can do this by the following:

1. Hold down MAGIC until the LED under the device blinks twice. The LED under the current

device will stay lit.

2. Press 993 – the LED will blink twice.

3. Use the MODE key to select the Device you remove from Volume Lock.

4. Press VOLUME DOWN – the LED will blink twice and device is now removed.

To unlock the volume and set every device back to controlling its own volume, the procedure is:

1. Hold down MAGIC until the LED under the TV key blinks twice. The LED under the current

mode key will stay lit.

2. Press 993 – the LED will blink twice.

3. Press VOLUME UP – the LED will blink twice and Volume is now unlocked.

Please note that Volume Lock only applies in Device Mode – Activities are unaﬀected.

VOLUME LOCK

PRODUCT DISPOSAL

The crossed out wheeled bin symbol on this product ensures that this product is manufactured

using high quality components that can be recycled and reused according to European Directive

2002/96/EC. Please do not dispose this product with your normal household waste but inform your-

self about the local separate collection for electrical and electronic products to dispose this product

correctly. This will help preventing potential negative eﬀects on the environment and/or human

health.

BATTERY DISPOSAL and safety

Please do not dispose your batteries with your normal household waste but inform yourself about

the local separate collection for empty batteries to dispose them correctly. This will help preventing

potential negative eﬀects on the environment and/or human health.Keep batteries away from ﬁre,

out of direct sunlight, and away from other sources of heat.

UNIVERSAL ELECTRONICS INC/ONE FOR ALL warrants to the original purchaser that this product

will be free from defects in materials and workmanship under normal and correct use for a period

of one (1) year from the date of original purchase. This product will be replaced free of charge if it

has been proven to be defective within the one (1) year warranty period. This warranty does not

cover cartons, carrying cases, batteries, broken or marred cabinets or any other item used in con-

nection with the product. Any further obligation than listed above is excluded. Please notice that

we need your purchase receipt so that we may establish your eligibility for service. If you have

bought this product for purposes which are not related to your trade, business or profession, please

remember that you may have legal rights under your national legislation governing the sale of con-

sumer goods. This guarantee does not aﬀect those rights.

Universal Electronics BV

Europe & International

Colosseum 2, 7521 PT Enschede

The Netherlands

URC7145

710813

RDN-1190516

www.oneforall.com

Ireland

www.oneforall.com

South Africa

0861100551

support@oneforall.co.za

www.connoisseur.co.za

www.oneforall.com

New Zealand

0800 1425569

sales@amber.co.nz

www.amber.co.nz

www.oneforall.com

Australia

1 300 888 298

ofa.support@ambertech.com.au

www.ambertech.com.au

www.oneforall.com

Evolve_4_QSG_UK_URC7145_710813_PRINT_Opmaak 1 20-05-16 16:21 Pagina 6

Product specificaties

Merk:	One For All
Categorie:	Afstandsbediening
Model:	Evolve 4
Kleur van het product:	Zwart
Ingebouwd display:	Nee
Gewicht:	- g
Ondersteund aantal accu's/batterijen:	2
Interface:	IR Draadloos
Teletext:	Ja
Merkcompatibiliteit:	Alle merken
Maximumbereik:	- m
Backlight toetsen:	Nee
Ingebouwde accu:	Nee
Oplaadbaar:	Nee
Compatibele producten:	TV, STB, Blu-ray/DVD, Audio devices
Input type:	Drukknopen
juiste gebruik afstandsbediening:	Audio,CABLE,DTT,DVD/Blu-ray,Game console,Home cinema system,IPTV,Projector mount,SAT,STB,TNT,TV,TV set-top box
Type batterij:	AAA
Number of devices supported:	4
Aantal merken in database:	> 1000