Omega Pro 82004 Handleiding
Omega
Schroefmachine
Pro 82004
Lees hieronder de đź“– handleiding in het Nederlandse voor Omega Pro 82004 (7 pagina's) in de categorie Schroefmachine. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/7
1” AIR IMPACT WRENCH
MODELS
82004
82004B
82004-M0_092017
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
!
Read this manual and follow all the Safety Rules and Operating Instructions before using this product.
SFA Companies
© Sep. 2017
2
SAFETY AND GENERAL INFORMATION
Save these instructions. For your safety, read, understand, and follow the information provided with and on this
device before using. The owner and/or operator shall have an understanding of the device, its operating characteristics
and safety operating instructions before operating the equipment. The owner and/or operator shall be aware that use
and repair of this product may require special skills and knowledge. Instructions and safety information shall be read
to and discussed with the operator in the operator’s native language, making sure that the operator comprehends
their contents, before use of this equipment is authorized. If any doubt exists as to the safe and proper use of this
device, remove from service immediately.
Inspect before each use. Do not use if abnormal conditions such as cracked welds, damaged, loose or missing
parts are noted. Any equipment that appears damaged in any way, is found to be worn, or operates abnormally shall
be removed from service until repaired. If the equipment has been or is suspected to have been subjected to an
abnormal load or shock, immediately discontinue use until inspected by a factory authorized repair facility (contact
distributor or manufacturer for list of authorized repair facilities). It is recommended that an annual inspection be
made by an authorized repair facility. Labels and Operator’s Manuals are available from the manufacturer.
Product Description
This is a hand-held air powered impact wrench designed to be used by one operator for the tightening, loosening
or installing of threaded fasteners.
Speciîšżcations
Item 82004, 82004B
Drive Size 1” Square
Max. Torque 2065 ft.-lbs.
Max. Pressure 140 PSI
Air Inlet 1/2”
Hose Size 1/2”
Operating Instructions
Note: Before use ensure that the air line is free of dust and moisture
1. Insert 1/2” air inlet nozzle (not included) to the port on the bottom of the handle. Use thread tape (not
included) on the nozzle to ensure a good connection. If a poor connection is made between the inlet nozzle
and the air tool, performance may be affected.
2. Attach a socket of the correct size to the anvil.
! : Attach socket to anvil prior to connecting tool to air pressure. Accidental trigger pull could result in Caution
personal injury
3. Before connecting the air hose to the air inlet nozzle, apply 4 or 5 drops of pneumatic oil into the air inlet. Attach
air hose to the air inlet nozzle. The max. air pressure to be used is 140 psi. and the air compressor regulator
should never be set above 140 psi. doing so could result in damage to the tool.
Note: It is recommended to have an air îšżlter, regulator and lubricator in-line between the compressor and air tool. If
a lubricator is not used, lubricate the air motor every 3 or 4 hours of operation.
Note: To reverse direction, press the speed regulator dial side to side.
3
Operating Hazards
• The use of this tool can expose the operator’s hands to
hazards including, impacts, cuts and abrasions and heat.
Wear suitable gloves to protect hands.
• Operators and maintenance personnel shall be physically
able to handle the bulk, weight and power of the tool.
• Hold the tool correctly; be ready to counteract normal or
sudden movements and have both hands available.
• Maintain a balanced body position and secure footing.
• In cases where the means to absorb the reaction torque
are requested, it is recommended to use a suspension
arm whenever possible. If that is not possible, side
handles are recommended for straight-case and pistol-
grip tools. It is recommended to use a means to absorb
the reaction torque above 2.95 ft.-lbs. (4 N•m) for straight
tools, above 7.38 ft.-lbs. (10 N•m) for pistol-grip tools.
• Release the start-and-stop device in the case of an
interruption of the energy supply.
• Do not use in conned spaces and beware of crushing
hands between tool and workpiece
Workplace Hazards
• Slips, trips and major causes of workplace injury. Be
aware of slippery surfaces caused by the use of the
tool and also of trip hazards caused by the air line or
hydraulic hose.
• Proceed with care in unfamiliar surroundings. Hidden
hazards, such as electricity or other utility lines, can exist.
• The impact wrench is not intended for use in potentially
explosive atmospheres and is not insulated against
coming into contact with electric power.
• Make sure there are no electrical cables, gas pipes, etc.,
that can cause a hazard if damaged by use of the tool.
• Dust and fumes generated when using impact wrench
can cause ill health (for example cancer, birth defects,
asthma and/or dermatitis); risk assessment and
implementation of appropriate controls for these hazards
are essential.
• Direct the exhaust so as to minimize disturbance of dust
in a dust-îšżlled environment.
• Use respiratory protection in accordance with employer’s
instructions and as required by occupational health and
safety regulations.
Projectile Hazards
• Failure of the workpiece,of accessories or even of the
inserted tool itself can generate high-velocity projectiles.
• Always wear impact-resistant eye protection during the
operation of the impact wrench. The grade of protection
required should be assessed for each use.
• Ensure that the workpiece is securely xed.
Entanglement Hazards
• Entanglement hazards can result in choking, scalping
and/or lacerations if loose clothing, personal jewelery,
neckware, hair or gloves are not kept away from the tool
and accessories.
• Gloves can become entangled with the rotating drive,
causing severed or broken îšżngers.
• Rotating drive sockets and drive extensions can easily
entangle rubber-coated or metal-reinforced gloves.
• Do not wear loose-tting gloves with cut of frayed ngers.
• Never hold the drive, socket or drive extension.
• Keep hands away from rotating drives.
Noise Hazards
• Exposure to high noise levels can cause permanent,
disabling loss and other problems, such as tinnitus
(ringing, buzzing, whistling or humming in the ears).
Therefore a risk assessment and implementation of
appropriate controls for these hazards are essential.
• Appropriate controls to reduce the risk may include
actions such as damping materials to prevent
workpieces from “ringing”.
• Use hearing protection in accordance with employer’s
instructions and as required by occupational health and
safety regulations.
• Operate and maintain the impact wrench as
recommended in the instructions handbook, to prevent
an unnecessary increase in noise levels.
• Select, maintain and replace the consumable/inserted
tool as recommended in the instructions handbook, to
prevent an unnecessary increase in noise.
Vibration Hazards
• Exposure to vibration can cause disabling damage to the
nerves and blood supply of the hands and arms.
• Wear warm clothing when working in cold conditions and
keep your hands warm and dry.
• If you experience numbness, tingling, pain or whitening
of the skin in your îšżngers or hands, stop using the impact
wrench, tell your employer and consult a physician.
• Operate and maintain the impact wrench as recommended
in the instructions handbook, to prevent an unnecessary
increase in vibration levels.
• Do not use worn or ill-tting sockets or extensions, as this
is likely to cause a substantial increase in vibration.
• Hold the tool with a light but safe grip, taking account of
the required hand reaction forces, because the risk from
vibration is generally greater when the grip force is higher.
• Support the weight of the tool in a stand, tensioner or
balancer, if possible.
• Sleeve ttings should be used where practicable.
Repetitive Motion Hazards
• If the operator experiences symptoms such as
persistent or recurring discomfort, pain, throbbing,
aching, tingling, numbness, burning sensations or
stiffness, these warning signs should not be ignored.
The operator should cease use of the tool, tell the
employer and consult a qualiîšżed health professional.
Maintenance Hazards
• Disconnect air hose from tool prior to any maintenance
work.
WARNING
!
Product specificaties
| Merk: | Omega |
| Categorie: | Schroefmachine |
| Model: | Pro 82004 |
Heb je hulp nodig?
Als je hulp nodig hebt met Omega Pro 82004 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Schroefmachine Omega
19 April 2023
Handleiding Schroefmachine
- Schroefmachine Bosch
- Schroefmachine Panasonic
- Schroefmachine AEG
- Schroefmachine DeWalt
- Schroefmachine Basetech
- Schroefmachine Batavia
- Schroefmachine Bavaria
- Schroefmachine Bruder Mannesmann
- Schroefmachine Dremel
- Schroefmachine Easymaxx
- Schroefmachine Einhell
- Schroefmachine Elu
- Schroefmachine Fein
- Schroefmachine Ferm
- Schroefmachine Festool
- Schroefmachine Goon
- Schroefmachine Greenworks
- Schroefmachine Gude
- Schroefmachine Hikoki
- Schroefmachine Hitachi
- Schroefmachine Ingersoll Rand
- Schroefmachine Kawasaki
- Schroefmachine Kress
- Schroefmachine Laserliner
- Schroefmachine Makita
- Schroefmachine Maktec
- Schroefmachine Matrix
- Schroefmachine Metabo
- Schroefmachine Milwaukee
- Schroefmachine Parkside
- Schroefmachine Powerfix
- Schroefmachine Powerplus
- Schroefmachine Ryobi
- Schroefmachine Silverline
- Schroefmachine Skil
- Schroefmachine Stanley
- Schroefmachine Toolcraft
- Schroefmachine Toolland
- Schroefmachine Trotec
- Schroefmachine Velleman
- Schroefmachine Vonroc
- Schroefmachine Westfalia
- Schroefmachine Wiha
- Schroefmachine Worx
- Schroefmachine Ozito
- Schroefmachine Black And Decker
- Schroefmachine Steren
- Schroefmachine Urrea
- Schroefmachine Cocraft
- Schroefmachine Meec Tools
- Schroefmachine Senco
- Schroefmachine Genesis
- Schroefmachine Hilti
- Schroefmachine Facom
- Schroefmachine Kraftwerk
- Schroefmachine EMOS
- Schroefmachine Cotech
- Schroefmachine Power Craft
- Schroefmachine Tacklife
- Schroefmachine Truper
- Schroefmachine Fieldmann
- Schroefmachine Mafell
- Schroefmachine Carrera
- Schroefmachine Biltema
- Schroefmachine Porter-Cable
- Schroefmachine Beta
- Schroefmachine Dedra
- Schroefmachine MSW
- Schroefmachine Sthor
- Schroefmachine Craftsman
- Schroefmachine Chamberlain
- Schroefmachine Chicago Pneumatic
- Schroefmachine Alpha Tools
- Schroefmachine Hazet
- Schroefmachine Yato
- Schroefmachine Abac
- Schroefmachine Meister Craft
- Schroefmachine StarTech.com
- Schroefmachine Park Tool
- Schroefmachine Pansam
- Schroefmachine Gedore
- Schroefmachine Netter Vibration
- Schroefmachine SW-Stahl
- Schroefmachine Cleco
- Schroefmachine Einhell Bavaria
- Schroefmachine Prowork
- Schroefmachine Proviel
- Schroefmachine WeidmĂĽller
- Schroefmachine Wera
- Schroefmachine Rodcraft
- Schroefmachine Bavaria By Einhell
- Schroefmachine TAURUS Titanium
Nieuwste handleidingen voor Schroefmachine
20 November 2024
19 November 2024
19 November 2024
19 November 2024
17 November 2024
17 November 2024
16 November 2024
16 November 2024
15 November 2024
15 November 2024