Olympus VN-4100 Handleiding
Olympus
Voice recorder
VN-4100
Lees hieronder de đź“– handleiding in het Nederlandse voor Olympus VN-4100 (10 pagina's) in de categorie Voice recorder. Deze handleiding was nuttig voor 83 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/10
E1-BZ8174-03
AP0701
-
1
-
DIGITAL VOICE RECORDER
VN-4100/VN-4100PC
VN-3100/VN-3100PC
VN-2100/VN-2100PC
VN-1100/VN-1100PC
EN
INSTRUCTIONS
Thank you for purchasing an Olympus
Digital Voice Recorder.
Please read these instructions for information
about using the product correctly and safely.
Keep the instructions handy for future reference.
To ensure successful recordings, we recommend that
you test the record function and volume before use.
For customers in North and South America
USA RFI
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment gen-
erates, uses and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interference to radio communications. How-
ever, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
Canadian RFI
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus as set out in the Radio Interference Regulations of the Canadian Depart-
ment of Communications.
Cet appareil numérique ne dépasse pas les limites de Catégorie B pour les émissions de
bruit radio émanant d’appareils numériques, tel que prévu dans les Règlements sur
l’Interférence Radio du Département Canadien des Communications.
For customers in Europe
“CE” mark indicates that this product complies with the European
requirements for safety, health, environment and customer protection.
This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection
of waste electrical and electronic equipment in the EU countries. Please do not throw
the equipment into the domestic refuse. Please use the return and collection systems
available in your country for the disposal of this product.
Applicable Product : VN-4100/VN-4100PC/VN-3100/VN-3100PC/VN-2100/VN-2100PC/
VN-1100/VN-1100PC
-
2
-
1
Lightly press down on the
arrow and slide the battery
cover open.
2
Insert two size-AAA alkaline
batteries, observing the correct
polarity.
3
Close the battery cover
completely.
Time/Date screen appears. The hour
indicator flashes, indicating the start of the
Time/Date setup process. (See “Setting
Time/Date (TIME)” for details)
An optional Ni-MH Rechargeable Battery (BR401) from Olympus can be used for the recorder.
Replacing Batteries
When appears on the display, replace the batteries as soon as possible. Size-AAA alkaline
batteries are recommended. When the batteries are depleted, appears on the display, and the
recorder shuts off. It is recommended to set the HOLD switch to the HOLD position before you replace
batteries to maintain the current settings (Time/Date, etc.). For your convenience,the recorder also
logs the current settings in nonvolatile memory at hourly intervals.
4Inserting Batteries
4Power Supply
The HOLD switch functions as a power button. When you
do not use the recorder, set the HOLD switch to the HOLD
position while the recorder is stopped. This will power off
the recorder and minimize the battery drain.
Power on…Reset the HOLD switch.
Power off…Set the HOLD switch to the HOLD position.
Standby Mode and Display Shut Off
If the recorder is stopped or paused for 60 minutes or longer during recording or play back,
it goes into Standby (power-save) mode, and the display shuts off. To exit Standby mode
and turn on the display, press any button.
Earphone jack
Microphone jack
Getting Started
4Identification of Parts
Record/play indicator light
Display (LCD panel)
DISPLAY/MENU button
ERASE button
Hold switch
Built-in speaker
Battery cover
Built-in Microphone
REC (Record) button
STOP button
PLAY button 9 (Fast Forward) button
0 (Rewind) button
+ button
– button
*PC (USB) terminal....
VN-1100PC/VN-2100PC/VN-3100PC/VN-4100PC
USB terminal*
HOLD
FOLDER/INDEX button
sYou can switch the time indication between the 12-hour system and the 24-hour system by pressing the
DISPLAY/MENU button while you are setting the hour or minute.
sYou can change the order of the date indication by pressing the DISPLAY/MENU button while you are
setting the year, month, or day.
(Example: June 14, 2007)
4Hold
Set the HOLD switch to the HOLD position.
All operation buttons are disabled. This feature is
useful when the recorder has to be carried in a
handbag or pocket.
Remember to reset the HOLD switch before
attempting to use the recorder.
Notes
sThe alarm will sound at the scheduled time even if
the recorder is set to HOLD. The recorder will then
begin to play the file associated with the alarm once
you press any button (Excluded VN-1100/VN-
1100PC).
sThe recorder functions as follows with the HOLD
switch set to the HOLD position:
–If the recorder is playing, the display goes dark
when playback of the current file has completed.
–
If the recorder is recording, the display goes dark
when the recorder stops recording automatically
upon running out of free memory.
Current folder
-
3
-
1
Press and hold the MENU
button for 1 second or longer.
2
Press the + or – button until
“TIME” flashes on the
display.
3
Press the PLAY button.
The hour indicator flashes.
4
Press the + or – button to set
the hour.
5
Press the PLAY or 9
button to accept the minute.
The minute indicator flashes.
Pressing the 0 button enables the hour
setting again.
6
Press the + or – button to set
the minute.
Repeat steps 5 and 6 to continue to set
the year, month and date in the same way.
7
After setting the date, press
the PLAY or 9 button.
This completes the time/date setup
procedure.
4Setting Time/Date (TIME)
If you have set the time and date, information as to when a sound file was recorded is
stored automatically with that file.
When you install batteries for the first time or each time you replace the batteries, the
hour indication will flash. In such a case, be sure to set the time and date by following
steps 4 through 7 described below.
4Notes on the Folders
The recorder provides four folders, A, B, C, and D (D is for VN-2100/
VN-2100PC/VN-3100/VN-3100PC/VN-4100/VN-4100PC only).
To change the folder selection, press the FOLDER button while the
recorder is stopped. Each recorded file is stored in a folder. Using folders
to classify files makes it convenient to find files you want to access
later. Up to a total of 100 files can be recorded in each folder.
4How to Use the
Strap
Strap hole
*Strap is not supplied.
Use the optional accessory.
Product specificaties
| Merk: | Olympus |
| Categorie: | Voice recorder |
| Model: | VN-4100 |
Heb je hulp nodig?
Als je hulp nodig hebt met Olympus VN-4100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Voice recorder Olympus
7 Februari 2022
16 Augustus 2022
17 Augustus 2022
8 Februari 2022
17 Augustus 2022
7 Februari 2022
17 Augustus 2022
15 Augustus 2022
17 Augustus 2022
8 Februari 2022
Handleiding Voice recorder
- Voice recorder Sony
- Voice recorder Grundig
- Voice recorder Aiwa
- Voice recorder Mpman
- Voice recorder Zoom
- Voice recorder LifeGood
Nieuwste handleidingen voor Voice recorder
11 Juli 2023
12 Mei 2023
12 Mei 2023
4 Februari 2023
12 Mei 2023
4 Februari 2023
12 Mei 2023
5 Juli 2022
30 Augustus 2022
16 Augustus 2022