Olympus Ferrari Digital Model 2004 Handleiding

Olympus Digitale camera Ferrari Digital Model 2004

Lees hieronder de 📖 handleiding in het Nederlandse voor Olympus Ferrari Digital Model 2004 (211 pagina's) in de categorie Digitale camera. Deze handleiding was nuttig voor 66 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/211

DIGITAL MODEL 2004

DIGITAL CAMERA

REFERENCE MANUAL

●Thank you for purchasing an Olympus digital camera. Before you start to use your

new camera, please read these instructions carefully to enjoy optimum

performance and a longer service life. Keep this manual in a safe place for future

reference.

●We recommend that you take test shots to get accustomed to your camera before

taking important photographs.

●The screen and camera illustrations shown in this manual were produced during

the development stages and may differ from the actual product.

For customers in North and South America

For customers in Europe

“CE” mark indicates that this product complies with the European requirements for

safety, health, environment and customer protection.

“CE” mark cameras are intended for sales in Europe.

Trademarks

•IBM is a registered trademark of International Business Machines Corporation.

•Microsoft and Windows are registered trademarks of Microsoft Corporation.

•Macintosh is a trademark of Apple Computer Inc.

•All other company and product names are registered trademarks and/or trademarks of their

respective owners.

•The standards for camera file systems referred to in this manual are the “Design Rule for Camera

File System/DCF” standards stipulated by the Japan Electronics and Information Technology

Industries Association (JEITA).

For customers in USA

Declaration of Conformity

Model Number : Ferrari DIGITAL MODEL 2004

Trade Name : OLYMPUS

Responsible Party : Olympus America Inc.

Address : 2 Corporate Center Drive, Melville, New York

11747-3157 U.S.A.

Telephone Number : 1-631-844-5000

Tested To Comply With FCC Standards

FOR HOME OR OFFICE USE

This device complies with Part 15 of the FCC rules. Operation is subject

to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including

interference that may cause undesired operation.

For customers in Canada

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

You can choose from more than 20 different types

of scene shooting modes, making it

easy to set the appropriate shooting

mode for a variety of shooting

situations!

Once you’ve selected the shooting

mode, just press the shutter

button to take the picture. ~ P. 34

You can take sequential shots

(~ P. 61), or record movies with

sound (~ P. 36).

The pictures you

take are recorded

and stored on the

xD-Picture Card.

When the camera is connected

to a PC or printer...

You can transfer the images to

the PC. ~ P. 171

You can print out stored pictures

directly with a PictBridge-

compatible printer without

using the PC. ~ P. 146

You can create photo

albums from the pictures

stored on the xD-Picture

Card. ~ P. 104

When the camera is in the

cradle ........

Images can be played back

on a TV with the AV cable.

~ P. 87

The battery can be

recharged with the AC

adapter. ~ P. 27

What you can do with this camera

How to use this manual

This manual includes a table of contents, index and menu list to help you

easily locate the information you need.

Searching the table of contents ~P. 7

All the chapter and section titles are included in the table of contents so that you can

quickly find the chapters you want to read (e.g., the introductory chapter, shooting

basics, etc.)

When you want to play back the images you have just taken.

Go to Chapter 5 Playback and look for the page titled “Viewing

still images........72”.

For example

Sequential shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Self-timer shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

AF MODE — Changing the focus range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

METERING — Changing the metering area . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Varying the image brightness (Exposure Compensation) . . . . . . . . . . . . . . . 65

Selecting the record mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

WB — Adjusting the color tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Recording sound with still pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

RESET — Restoring the factory default settings. . . . . . . . . . . . . . . . . . . . . . . . . 71

5 Playback 72

Viewing still images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Close-up playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Index display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Searching the index ~P. 208

Terms used in this manual (such as the names of functions and parts) are listed in

alphabetical order. When you come across a term that you are not familiar with or

about which you want to learn more, you can search the index to find the relevant

page.

If you want to know more about the term “METERING”

Go to the index at the end of this manual and look under M for

“METERING........64”.

For example

Lens cap ................................................24, 30

MACRO ..................................................48

Memory gauge..............................................23

MENU/OK button....................................18, 42

METERING ..................................................64

Microphone ......................................19, 69, 99

Mode switch ( // ) ..........................30

Monitor......................................18, 20, 30, 125

Monitor brightness adjustment ............125

MOVIE PLAYBACK......................................88

MUSEUM ..............................................49

NIGHT+PORTRAIT ................................46

NIGHT SCENE ......................................45

NTSC..........................................................202

Number of frames in an index display ..126

Number of storable still pictures ............31, 67

Record mode ........................................66

Recording sound ..............................69, 99

Red-eye reduction flash ........................58

Remaining movie recording time ................36

RESET..........................................................71

Resizing ................................................97

Resolution ....................................................67

SCENE SELECT ..........................................43

SCREEN ....................................................120

SEL. ALBUM ..............................................108

SELF PORTRAIT ..................................47

SELF PORTRAIT+SELF TIMER ............50

Self-timer ................................................62

Self-timer lamp ......................................19, 62

SEPIA ..........................................................97

Sequential shooting ..............................61

SETUP........................................................114

Shooting mode ..........................20, 31

Searching the list of menus ~P. 204

The camera’s menus are listed in a tree structure. When you come across a menu

whose name is unfamiliar on the menu screen, you can find the relevant pages for this

menu function in the menu list.

When you want to know how to make settings for WB in the

menu screen

Go through the menus until you find WB and look for the reference

page number.

For example

Menu directory

Shooting menu ( mode)

Function Setting Ref. page

SCENE SELECT PROGRAM AUTO P. 42

SCENE

RESET YES, NO P. 71

FLASH MODE*1 AUTO , , , P. 58

*1 ON, OFF P. 62

SUPER HIGH*1 , HIGH*1, BASIC, E-MAIL P. 66

WB*2 AUTO , , , , P. 68

*2 +2.0 - 0.0 - –2.0 P. 65

METERING*2 AUTO , SPOT P. 64

*1 ON, OFF P. 61

DIGITAL ZOOM*1 ON, OFF P. 60

AF MODE*1 AUTO, SPOT P. 63

ON OFF P 69

* For information on how to read the instructions in this manual, refer to “How to read the

instruction pages” (P. 6)

5
Composition of the manual
Downloading images to
a computer
Printing pictures
Basic and advanced
shooting
Introduction to the
camera’s functions
1
Getting started P. 24
2
Shooting P. 31
3
Using the situation-related shooting modes P. 42
Playing back and
organizing images
4
Using the advanced shooting functions P. 55
Settings that make the
camera easier to operate
7
Using your camera effectively P. 114
8
Making print reservations and printing  P. 131
at photo labs
9
Printing on a PictBridge-compatible printer P. 146
(direct printing)
10
Transferring images to a computer P. 171
5
Playback P. 72
6
Registering images in albums P. 104
Contents . . . . . . P. 7
Safety precautions . . . . . P. 12
Names of parts . . . . . P. 18
Using the provided
accessories
11
Accessories P. 190
Troubleshooting and
other information
12
Miscellaneous P. 192
Specifications . . . . P. 201
Glossary . . . . P. 202
Menu directory . . . . P. 204
Index . . . . P. 208

How to read the instruction pages

This sample page is only for your reference. It may differ from the actual page in this

manual.

The gray part on the right

shows tips for operating

procedures.

Indications used in this manual

Important information on factors which may lead to a malfunction or

operational problems. Also warns of operations that should be

absolutely avoided.

Useful information and hints that will help you get the most out of

your camera.

This shows the buttons

corresponding to the function.

152

Printing on a PictBridge-compatible printer

(direct printing)

PRINT — Printing selected pictures

Select the print paper items to set.

SIZE : Selects the paper size.

BORDERLESS : Selects the frame

setting on the paper.

Select SIZE option. Select BORDERLESS

option. If neither screen is displayed, each

setting is set to STANDARD.

PRINTP

APER

END

SIZE

BORDERLESS

STANDARD

ANDARD

STANDARD

ANDARD

CANCEL SELECT

BACK

PRINTP

APER

END

SIZE

BORDERLESS

STANDARD

ANDARD

STANDARD

ANDARD

CANCEL SELECT

BACK

PRINTP

APER

END

SIZE

BORDERLESS

STANDARD

CANCEL SELECT

BACK

PRINTP

APER

END

SIZE

BORDERLESS

STANDARD

CANCEL SELECT

BACK

Select END.

BORDERLESS setting

ON : The picture is printed filling

the entire page.

OFF : The picture is printed inside a

blank frame.

Rotate to

select

MENU/OK

Press to confirm

Rotate to

select

MENU/OK

Press to confirm

Rotate to

select

MENU/OK

Press to confirm

Control dial

BACK/NEXT

button

MENU/OK button

Zoom button (W)

7
Contents
What you can do with this camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
How to use this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Composition of the manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 
How to read the instruction pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
General precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Handling the camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Caution for usage environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Battery handling precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
LCD monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
FCC Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Names of parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Monitor indications… . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
1 Getting started 24
Attaching the lens cap and strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Loading the battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Unloading the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Charging the battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Inserting the card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Removing the card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Power on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
2 Shooting 31
Taking still pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Specifying the type of scene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Movie recording  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
If correct focus cannot be obtained . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Subjects that are difficult to focus on. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Determine the position of the subject after focusing (Focus Lock) . . . . . . . . . . . 39
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
3 Using the situation-related shooting modes 42
LANDSCAPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
LANDSCAPE+PORTRAIT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
NIGHT SCENE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
NIGHT+PORTRAIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
INDOOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
FIREWORKS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

8
Contents
SUNSET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
PORTRAIT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
SELF PORTRAIT (Shooting yourself while holding the camera). . . . . . . . . . 47
MACRO (Close-up shooting). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
SUPER MACRO (Closer shot than MACRO) . . . . . . . . . . . . . . . . . . . . . . . . 48
CUISINE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
DOCUMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
MUSEUM (No beep sound & no flash) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
SPORT (Capturing a fast-moving subject). . . . . . . . . . . . . . . . . . . . . . . . . . . 49
BEACH & SNOW (Shooting seascapes 
or snow-capped mountain landscapes ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
SELF PORTRAIT+SELF TIMER (Shooting yourself and 
background) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
CANDLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
AVAILABLE LIGHT PORTRAIT (Shooting in low light conditions 
without a flash) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
BEHIND GLASS (Shooting a subject through glass). . . . . . . . . . . . . . . . . . . 51
2 IN 1 (Storing two successive shots as a single picture) . . . . . . . . . . . . . . . 52
PANORAMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
4 Using the advanced shooting functions 55
Selecting functions from the shooting menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Flash  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
DIGITAL ZOOM — Using the digital zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Sequential shooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Self-timer shooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
AF MODE — Changing the focus range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
METERING — Changing the metering area . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Varying the image brightness (Exposure Compensation)  . . . . . . . . . . . . . . . 65
Selecting the record mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
WB — Adjusting the color tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Recording sound with still pictures  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
RESET — Restoring the factory default settings. . . . . . . . . . . . . . . . . . . . . . . . . 71
5 Playback 72
Viewing still images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Close-up playback  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Index display  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

10
Contents
8 Making print reservations and printing at photo labs 131
How to print pictures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Selecting the print reservation mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Single-frame reservation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
All-frame reservation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Resetting print reservation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
9 Printing on a PictBridge-compatible printer 
(direct printing) 146
Direct printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Connecting the camera to a printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Selecting the print mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
PRINT — Printing selected pictures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
MULTI PRINT — Printing multiple pictures on one page . . . . . . . . . . . . . . . . . . . . 157
ALL PRINT — Printing all the pictures stored in the card/album . . . . . . . . . . . . . . 162
ALL INDEX — Printing an index of all the pictures stored in the card . . . . . . . . . . 165
PRINT ORDER — Printing with print reservation. . . . . . . . . . . . . . . . . . . . . . . . . . 167
Exiting direct printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
If an error code is displayed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
10 Transferring images to a computer 171
Flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Identifying the OS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Installing the USB driver for Windows 98 (When using Windows 98/98 SE) . . 176
Connecting the camera to the computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
Downloading images to your computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Disconnecting the camera from your computer . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
What you can do with the CAMEDIA Master software . . . . . . . . . . . . . . . . . . . . . . 189

11
Contents
11 Accessories 190
AC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
12 Miscellaneous 192
Error codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
Camera maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
Menu directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208

Safety precautions

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

Lightning flash with an arrowhead,

enclosed in a triangle, alerts you to the

presence of uninsulated voltage points

inside the product which could cause a

serious electrical shock.

WARNING!

TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK, NEVER EXPOSE THIS PRODUCT TO

WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT.

An exclamation mark enclosed in a triangle

alerts you to important operating and

maintenance instructions in the

documentation provided with the product.

Read All Instructions — Before you use the product, read all operating instructions. For more

information on accessories such as the lithium ion battery, refer to the manuals provided with

those products.

Save These Instructions — Save all safety and operating instructions for future reference.

Heed Warnings — Read carefully and follow all warning labels on the product and those

described in the instructions.

Follow Instructions — Follow all instructions provided with this product.

Cleaning — Always unplug this product from the wall outlet before cleaning. Use only a damp

cloth for cleaning. Never use any type of liquid or aerosol cleaner, or any type of organic solvent

to clean this product.

Attachments — For your safety, and to avoid damaging the product, use only accessories

recommended by Olympus.

Water and Moisture — Never use this product around water (near a bathtub, kitchen sink, laundry

tub, wet basement, swimming pool or in the rain).

Location — To avoid damage to the product and prevent personal injury, never place this product

on an unstable stand, tripod, bracket, table or cart. Mount only on a stable tripod, stand, or

bracket. Follow the instructions that describe how to safely mount the product, and use only the

mounting devices recommended by the manufacturer.

Power Sources — Connect this product only to the power source described on the product label.

If you are not sure about the type of power supply in your home, consult your local power

company.

Refer to instruction pages for information on using the product with a battery.

Grounding, Polarization — If this product is used with a specified AC adapter, the adapter may

be equipped with a polarized alternating current line plug (a plug with one blade wider than the

other). This safety feature allows the plug to fit into the power outlet only one way. If you cannot

insert the plug into the wall outlet, pull it out, reverse it, and then reinsert it. If the plug still fails to

fit, contact an electrician and have the receptacle replaced.

General precautions

Safety precautions

Protecting the Power Cord — The power supply cord should be placed so it will not be walked

on. Never put a heavy object on the power cord or wrap it around the leg of a table or chair.

Keep the area around the power cord connection points, at the power outlet, and at the product

connection, free of all AC adapter or accessory power cords.

Lightning — If a lightning storm occurs while using a specified AC adapter, remove it from the wall

outlet immediately. To avoid damage from unexpected power surges, always unplug the AC

adapter from the power outlet and disconnect it from the camera when the camera is not in use.

Overloading — Never overload wall outlets, extension cords, power strips, or other power

connection points with too many plugs.

Foreign Objects, Liquid Spillage — To avoid personal injury caused by fire or electrical shock

from contact with internal high voltage points, never insert a metal object into the product. Avoid

using the product where there is a danger of spillage.

Heat — Never use or store this product near any heat source such as a radiator, heat register,

stove, or any type of equipment or appliance that generates heat, including stereo amplifiers.

Servicing — Refer all servicing to qualified personnel. Attempting to remove the covers or

disassemble the product, could expose you to dangerous high voltage points.

Damage Requiring Service — If you notice any of the conditions described below while using a

specified AC adapter, unplug it from the wall outlet and refer servicing to qualified service

personnel:

a) Liquid has been spilled onto the product or some other object has fallen into the product.

b) The product has been exposed to water.

c) The product does not operate normally despite following operating instructions. Adjust only

the controls described in the operating instructions as improper adjustment of other controls

could damage the product and require extensive repair work by a qualified technician.

d) The product has been dropped or damaged in any way.

e) The product exhibits a distinct change in performance.

Replacement Parts — When replacement parts are required, make sure that the service center

uses only parts with the same characteristics as the originals, as recommended by the

manufacturer. Unauthorized substitution of parts could result in fire, electrical shock, or create

other hazards.

Safety Check — Upon completion of servicing or repairs, ask the service technician to perform

safety checks to determine that the product is in good working order.

Safety precautions

If the product is used without observing the information

given under this symbol, serious injury or death may result.

DANGER

If the product is used without observing the information

given under this symbol, injury or death may result.

WARNING

If the product is used without observing the information given

under this symbol, minor personal injury, damage to the

equipment, or the loss of valuable data may result.

CAUTION

WARNING

Do not use the camera near flammable or explosive gases.

●To avoid causing a fire or explosion, never use the camera near flammable or explosive gases.

Do not use the flash on people (infants, small children, etc.) at close range.

●Use caution when taking flash pictures at close range. When you fire the flash, you must be at

least 1m (3ft) away from the faces of your subjects, especially when taking pictures of infants

and small children. Firing the flash too close to the subject’s eyes could cause a momentary loss

of vision.

Keep young children and infants away from the camera.

●Always use and store the camera out of the reach of young children and infants to prevent the

following dangerous situations which could cause serious injury:

– Becoming entangled in the camera strap or power cords, causing strangulation.

– Accidentally swallowing the battery, cards or other small parts.

– Accidentally firing the flash into their own eyes or those of another child.

– Accidentally being injured by the moving parts of the camera.

Do not touch the camera, cradle or AC adapter until charging is finished and the battery

have cooled.

●The camera and cradle become hot while charging. A specified AC adapter also becomes hot

during long use. At these times, they may cause minor burns.

Do not use or store the camera in dusty or humid places.

●Using or storing the camera in dusty or humid places may result in a fire or electric shock.

Do not cover the flash with a hand while firing.

●Do not cover the flash with a hand while firing or touch it after it has just been fired. It may be hot

and cause minor burns. Avoid using the flash for extended periods.

Do not take apart or modify the camera.

●Never attempt to disassemble the camera. The internal circuits contain high voltage points which

could cause serious burns or electrical shock.

Do not let water or foreign objects inside the camera.

●If the camera is accidentally dropped in water, or if liquid is spilled into the camera, stop using it,

allow it to dry, and then remove the battery. Contact the nearest authorized Olympus service

center.

Handling the camera

Safety precautions

CAUTION

Stop using the camera immediately if you notice any unusual odors, noise, or smoke

around it.

●If you notice any unusual odors, noise, or smoke around the camera during operation, switch it

off immediately —and disconnect a specified AC adapter (if attached). Allow the camera to sit

idle for a few minutes to cool. Take the camera outdoors, away from flammable objects, and

carefully remove the battery. Never remove the battery with bare hands, which may cause a fire

or burn your hands. Contact the nearest Olympus service center immediately.

Do not use the camera with wet hands.

●To avoid dangerous electrical shock, never hold or operate the camera with wet hands. Also, do

not connect or disconnect the power plug with wet hands.

Do not leave the camera in places where it may be subject to extremely high

temperatures.

●Doing so may cause parts to deteriorate and, in some circumstances, cause the camera to catch

fire. Do not use the cradle or AC adapter if it is covered (such as a blanket). This could cause

overheating, resulting in fire.

Be careful with the strap.

●Be careful with the strap when you carry the camera. It could easily catch on stray objects —and

cause serious damage.

Use only the AC adapter specified by Olympus.

●Never use any AC adapter except one specified by Olympus. Using a different AC adapter may

damage the camera or power source, or result in accidents or fire. Ensure the adapter used is

designed for your region or country. For more information, contact the nearest Olympus service

center or the store of purchase. Olympus makes no representations or warranties regarding any

damages caused by AC adapters not recommended by Olympus.

Do not damage the power-supply cord.

●Never pull or modify the power-supply cord. Make sure only the plug is securely held during

insertion and removal from the outlet.

Stop using the camera immediately, and contact the nearest Olympus service center or the store

of purchase if:

– The power-supply cord becomes hot, or it gives off smoke or unusual odors.

– The power-supply cord is cut or damaged, or the plug has a faulty contact.

●To protect the high-precision technology contained in this product, never leave the camera in the

places listed below, no matter if in use or storage:

– Places where temperatures and/or humidity are high or go through extreme changes.

Direct sunlight, beaches, locked cars, or near other heat sources (stove, radiator, etc.) or

humidifiers.

– In sandy or dusty environments.

– Near flammable items or explosives.

– In wet places, such as bathrooms or in the rain.

– In places prone to strong vibrations.

●Never drop the camera or subject it to severe shocks or vibrations.

●When mounted on a tripod, adjust the position of the camera with the tripod head. Do not twist

the camera.

●Do not touch electric contacts on cameras.

●Do not leave the camera pointed directly at the sun. This may cause lens damage, color failure,

ghosting on the CCD, or may possibly cause fires.

●Condensation may form inside the camera when there is a sudden extreme change in

temperature (such as when moving from indoors to outdoors). Acclimatize the camera to the

temperature (e.g. by putting the camera into the plastic bag) before use.

Caution for usage environment

Safety precautions

Follow these important guidelines to prevent the battery from leaking, overheating,

burning, exploding, or causing electrical shocks or burns.

Battery handling precautions

DANGER

●This camera uses an lithium ion battery specified by Olympus. Do not use any other type of

battery. Using any other type of battery could result in battery leakage or overheating, posing a

risk of fire or explosion. For safe and proper use, read the battery’s instruction manual carefully

before using it.

●Never heat or incinerate the battery.

●Take precautions when carrying or storing the battery to prevent it from coming into contact with

any metal objects such as jewelry, pins, fasteners, etc.

●Never store the battery where it will be exposed to direct sunlight, or subjected to high

temperatures in a hot vehicle, near a heat source, etc.

●To prevent causing battery leaks or damaging its terminals, carefully follow all instructions

regarding the use of the battery. Never attempt to disassemble the battery or modify it in any

way, by soldering, etc.

●If battery fluid gets into your eyes, flush your eyes immediately with clear, cold running water and

seek medical attention immediately.

●Always store the battery out of the reach of small children. If a child accidentally swallows the

battery, seek medical attention immediately.

WARNING

●Keep the battery dry at all times. Never allow it to come into contact with fresh or salt water.

●If the rechargeable battery has not been recharged within the specified time, stop charging it and

do not use it.

●Do not use the battery if it is cracked or broken.

●If the battery leaks, becomes discolored or deformed, or becomes abnormal in any other way

during operation, stop using the camera and consult your dealer or an authorized Olympus

service center. Continued use may result in fire or electric shock.

●If the battery leaks fluid onto your clothing or skin, remove the clothing and flush the affected

area with clean, running cold water immediately. If the fluid burns your skin, seek medical

attention immediately.

●Never attempt to modify the battery compartment on the camera, never insert anything (other

than the specified battery) into the compartment.

●Never subject the battery to strong shocks or continuous vibration.

CAUTION

●If the battery’s +/– terminals get wet or greasy, camera contact failure may result. Wipe the

battery well with the dry cloth before use.

●Always charge a battery when using it for the first time, or if it has not been used for a long

period.

●The battery may become hot during prolonged use. To avoid minor burns, do not remove it

immediately after using the camera.

●When operating the camera with battery power at low temperatures, try to keep the camera and

spare the battery as warm as possible. The battery which run down at low temperatures may be

restored after it is warmed at room temperature.

●The number of pictures you can take may vary depending on the shooting conditions or battery.

●Before going on a long trip, and especially before traveling abroad, purchase extra batteries.

A recommended battery may be difficult to obtain while traveling.

Safety precautions

LCD monitor

●Do not push the monitor forcibly; otherwise the image may become vague, resulting in a

playback mode failure or damage to the monitor. If the monitor is damaged, be careful not to get

any of the liquid crystals from the monitor in your month. If liquid crystals get on your limbs or

clothes, cleanse it away.

●A strip of light may appear on the top/bottom of the monitor, but this is not a malfunction.

●When a subject is viewed diagonally in the camera, the edges may appear zigzagged on the

monitor. This is not a malfunction; It will be less noticeable in playback mode.

●In places subject to low temperatures, the LCD monitor may take a long time to turn on or its

color may change temporarily. When using the camera in extremely cold places, it is a good idea

to occasionally place it in a warm place. A LCD monitor exhibiting poor performance due to low

temperatures will recover in normal temperatures.

●The LCD monitor is made with high-precision technology. However, black spots or bright

spots of light may appear constantly on the LCD monitor. Due to its characteristics or the

angle at which you are viewing the monitor, the spot may not be uniform in color and

brightness. This is not a malfunction.

FCC Notice

●Radio and Television Interference

Change or modifications not expressly approved by the manufacturer may void the user’s authority

to operate this equipment. This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

– Adjust or relocate the receiving antenna.

– Increase the distance between the camera and receiver.

– Connect the equipment to an outlet on a circuit different from that to which the receiver is

connected.

– Consult your dealer or an experienced radio/TV technician for help.

Only the OLYMPUS-supplied USB or IEEE1394 cables should be used to connect the camera to

USB or IEEE1394-enabled personal computers (PC).

Any unauthorized changes or modifications to this equipment would void the user's authority to

operate.

Names of parts

Zoom button

(W /T )

~ P. 41

MENU/OK button

~ P. 42

Speaker

BACK/NEXT

button ~ P. 42

Shutter button ~ P. 32

Monitor ~ P. 20, 125 Control dial ~ P. 42

Mode switch ( )

~ P. 30

POWER switch ~ P. 30

Cradle connector

Battery/Card compartment

cover ~ P. 25

Tripod socket

Names of parts

Lens

A/V OUT jack

~ P. 87

Connector end

DC-IN jack

~ P. 27

USB connector ~ P. 147, 178

Strap eyelet ~ P. 24

Flash ~ P. 58

Microphone ~ P. 69, 99

Self-timer lamp

~ P. 62

Cradle (provided)

Monitor indications

Items Indications Ref. page

14 Zoom P. 41, 60

15 AF target mark [ ] P. 31

16 Card access mark P. 32

17 Memory gauge , , , P. 23

18 Number of storable still pictures 6 P. 67

Remaining movie recording time 05:00 P. 36

Monitor indications

Still image Movie

x x 1010

SIZE :2048x1536

100–0010

’04.01.01.00:0004.01.01.00:00

1010

0.00.0

1010

FILEFILE

NEXTNEXT

JUMP

WB WB AUTOAUTO

’04.01.01.00:0004.01.01.00:00

00:00/56:3400:00/56:34

2525

0.0

SIZE :320x240

100–0025

FILEFILE

Items Indications Ref. page

1Battery check , , P. 23, 27

2Album (Displaying only images in albums) P. 108

(Displaying all images) P. 118

3File number 100-0010 P. 118

4Print reservation, Number of prints X 10 P. 139

5Movie P. 88

6Sound record P. 69

7Protect P. 92

8Record mode Still image : SH 3M, H 2M, B 1M, P. 66

VGA

Movie : ,

9Resolution 2048x1536, 1600x1200 etc. P. 67

10 White balance , , , P. 68

11 Exposure compensation –2.0 to +2.0 P. 65

12 Date/time '04.05.17 15:30 P. 127

13 Frame number 10 P. 110

14 Operation guide JUMP P. 72

Elapsed playback time/Overall 00:00/56:34 P. 88

recording time (movie)

FILEFILE

Playback mode

You can select how much information to display on the monitor. Screens when INFO is

set to ON are shown below.

~“INFO — Displaying shooting information on the monitor” (P. 118)

(Screen illustrations below are samples for monitor indications. For details, refer to

respective reference pages.)

Monitor indications

Before

shooting

(Gauge is off)

One picture is taken

(Lit)

No more pictures can

be taken (Fully lit).

Wait until the gauge

returns to the Off status

(first on the left) to take

the next shot.

Battery check

If the remaining battery power is low, the battery check indication changes as follows

when the camera is turned on or while the camera is in use.

Lights (green)

Remaining power

level: High*

Lights (red)

Remaining power level: Low.

Charge the battery.

* Your digital camera's power consumption varies greatly depending on usage and operating

conditions. Under some operating conditions, the camera may turn off without warning that

battery power is low. If this occurs, re-charge the battery.

Shooting ShootingShooting

Wait

BATTERY EMPTY

is displayed.

Remaining power level:

Exhausted.

Charge the battery.

Memory gauge

Wait

Memory gauge

The memory gauge lights up when the camera is storing a still picture you have just

taken on the card. The memory gauge indication changes as shown below depending

on the shooting status.

If the memory gauge is fully lit, wait a few seconds until it goes off to take the next

shot.

Getting started

Attaching the lens cap and strap

1Getting started

●Do not pull on the strap too hard when it is attached to the camera as this could

break the strap.

●Be careful with the strap when carrying the camera, as the strap can easily

catch on stray objects, causing serious damage.

●Attach the strap correctly as shown above so that the camera does not fall off.

Olympus is not responsible for any damages incurred when the strap is attached

incorrectly and the camera comes off.

Strap precautions

Strap eyelet

Thread the short end of the strap

through the strap eyelet.

Pull on the strap to make sure it

is fastened securely.

Thread the lens cap string through

the lens cap.

Attach the lens cap to

the camera as illustrated.

Getting started

Loading the battery

Release the

latch to insert

the battery.

Open the battery/card

compartment cover.

Close the battery/

card compartment

cover.

The camera uses an Olympus lithium-ion battery (LI-20B). Do not use any other type

of battery.

●A backup battery (optional) is recommended for extended battery-powered operation.

Insert the battery with the

OLYMPUS logo face up.

Gently push the latch backwards

to lift it 3. When you take your

finger off the latch, the latch drops

back on its own 4. After the latch

drops back, insert the battery 5.

Battery/Card compartment cover

Lift up the cover 6and push down

firmly on the section of the cover

7to close. Closing the battery/card

compartment cover locks the latch.

Slide the battery/card compartment

cover in the direction of the arrow

1. The cover unlocks and opens

in the direction of the arrow 2.

Latch

Getting started

Charging the battery

Align the cradle

connector with

the connector

end on the

cradle.

This camera uses an Olympus lithium-ion battery (LI-20B). Do not use any other type

of battery.

The battery is not fully charged when purchased. Before use, be sure to charge the

battery with the provided cradle and AC adapter.

Charging is performed with the battery loaded in the camera.

The battery check indication

blinks on the monitor while the

battery is charging. Battery

charging takes about 2 hours.

●The camera can also use an optional charger (LI-20C). Do not use any other

type of battery charger than the specified charger.

●Before charging the battery, be sure to read “Safety precautions” (~P. 12)

and “Accessories — AC adapter” (~P. 190).

Precautions on charging the battery

DC-IN jack

To the AC wall outlet

AC plug

AC adapter (provided)

We recommend that you use the AC adapter for any tasks of extended duration such as

downloading images to the PC, printing out images, etc. ~“Accessories — AC adapter”

(P. 190)

Cradle (provided)

When you use the AC adapter overseas, a multiplug is required to allow the plug to fit into local

power outlets. For details on multiplugs, consult a travel agency.

Using the AC adapter overseas

Getting started

Inserting the card

“Card” in this manual refers to the xD-Picture Card. The camera uses the card to

record pictures.

Compatible xD-Picture Card: 16 - 512 MB

Index area

Write the card’s contents here.

Contact area

The area that touches the camera’s electric

contact points. The camera reads the card here.

Contact area

Make sure that the monitor is turned

off.

Insert the card, making sure that the

card is oriented as shown in the

illustration.

Monitor

•Insert the card while keeping it

straight.

•When the card is inserted all the

way, it stops with a click.

•Inserting the card the wrong way

or at an angle could damage the

contact area or cause the card to

jam.

•If the card is not inserted all the

way, data may not be written to the

card.

Notch

Getting started

Inserting the card

Removing the card

Be sure to read “Accessories — Card” (~P. 191).

Card precaution

Make sure that the monitor is turned

off.

Push the card all the way to unlock it,

then let it return slowly.

Hold the card straight and pull it out.

The card may eject forcefully if you

take your finger off it immediately

after pushing it or if you flick it with

your fingers.

Getting started

Power on/off

Now, you are ready for shooting. Let’s take some pictures. ~P. 3 1

Monitor

Power on T Turns on the monitor.

Power off T Turns off the monitor.

Lens cap

Remove this when taking

pictures.

When the camera is

turned on, the camera’s

front lamp lights for a

moment.

Mode switch

: Select this for still picture

shooting.

: Select this for movie

shooting.

: Select this for playback.

POWER switch

Turns the camera on and off.

* Check the date/time settings when the

camera is turned on.

~“Setting the date and time” (P. 127)

The camera automatically turns off to save power if it is not operated for about 10

minutes. When the AC adapter is used, the camera does not switch off automatically.

Taking still pictures

2Shooting

Shooting

Set the mode switch to .

Turn on the camera.

Place the AF target mark on the subject

while viewing the monitor to compose

your shot.

Mode switch

Shutter button

POWER switch

Press

Hold the camera firmly with both

hands while keeping your elbows at

your sides to prevent camera

movement. While shooting vertically

using the flash, hold the camera so

that the flash is higher than the lens.

Keep your fingers and the strap

away from the lens and flash.

Shooting mode ~P. 42

AF target mark ~P. 39

Number of storable still pictures ~P. 67

Incorrect

Record mode ~P. 66

Taking still pictures

Shooting

Adjust the focus.

Press the shutter button gently (halfway).

Release the shutter.

Press the shutter button all the way (fully).

•When the focus and exposure are

locked, the green lamp lights

steadily.

•The (flash stand-by) mark

lights when the flash fires.

•When a picture is taken, a shutter

sound is output.

•The (card access) mark blinks

and the camera starts recording

the picture.

•Press the shutter button gently. If it

is pressed hard, the camera may

move and pictures may come out

blurred.

To check the picture immediately

after shooting:

~“REC VIEW — Checking the

picture immediately after shooting”

(P. 117)

Green lamp ~P. 38

Flash stand-by/Flash

charging mark ~P. 59

Card access mark ~P. 33

Taking still pictures

Shooting

●The camera automatically turns off if it is not operated for about 10 minutes.

Press the POWER switch to turn on the camera.

●Never remove the battery, card or AC adapter while the mark is blinking.

Doing so could destroy stored pictures and prevent storage of pictures you have

just taken.

●When taking pictures against strong backlight, the area of the picture in shadow

may appear colored.

●When you point the lens toward a bright object, vertical lines (smears) may

appear on the monitor. However, this does not affect the actual recorded

pictures.

Notes on shooting

TYou are too close to the subject. Take the picture at least 50 cm (19.7") away

from the subject, or try macro shooting (~P. 48) or super macro shooting

(~P. 48).

TThe subject is out of focus. Depending on the subject, focus may not be possible.

~“If correct focus cannot be obtained” (P. 38)

If the green lamp blinks when the shutter button is pressed halfway

Taking still pictures

Shooting

Specifying the type of scene

You can capture a high-quality picture in any shooting situation by choosing one of the

various shooting modes provided with this camera.

LANDSCAPE ~P. 45 LANDSCAPE+PORTRAIT

~P. 45

NIGHT SCENE ~P. 45

NIGHT+PORTRAIT

~P. 46

INDOOR ~P. 46 FIREWORKS ~P. 46

SUNSET ~P. 47 PORTRAIT ~P. 47 SELF PORTRAIT ~P. 47

MACRO ~P. 48 SUPER MACRO ~P. 48 CUISINE ~P. 48

Taking still pictures

Shooting

DOCUMENTS ~P. 49 MUSEUM ~P. 49 SPORT ~P. 49

BEACH & SNOW ~P. 50 SELF PORTRAIT+

SELF TIMER ~P. 50

CANDLE ~P. 50

AVAILABLE LIGHT

PORTRAIT ~P. 51

BEHIND GLASS ~P. 51 2 IN 1 ~P. 52

PANORAMA ~P. 53

Movie recording

Shooting

Turn on the camera in the mode.

~P. 30

Compose your shot while viewing the

monitor.

Start recording.

Press the shutter button fully.

You can record movies and sound simultaneously.

Press

Mode switch

Shutter button

POWER switch

Monitor

AF target mark

~P. 39

Remaining movie

recording time

(hour: min. : sec.)

Flash cannot be used.

Microphone

•The subject can be magnified

using the zoom button.

~“Zoom” (P. 41)

•The remaining recording time

depends on the selected record

mode, free space available on the

card, etc. ~“Selecting the

record mode” (P. 66)

Displayed in red during recording

Focus and optical zoom are

locked during movie recording, but

digital zoom can be used.

~“DIGITAL ZOOM — Using the

digital zoom” (P. 60)

If correct focus cannot be obtained

Shooting

Subjects that are difficult to focus on

Under the following conditions, auto focus may not work properly.

The green lamp blinks:

The subject cannot be

brought into focus.

Subjects with low contrast Subjects in excessively bright

light in the center of the frame

Subjects with no vertical lines

The green lamp lights,

but the subject cannot

be brought into focus.

Subjects with different

distances

Fast-moving subjects The subject you are focusing

on is not in the center of the

frame.

If this happens, focus on a high-contrast object the same distance away as the

intended subject, recompose your shot and then take the picture. If the subject has no

vertical lines, hold the camera vertically and adjust the focus, then return the camera to

the horizontal position to take the picture.

“Determine the position of the subject after focusing (Focus Lock)” ~P. 39

Mode switch

Shutter button

POWER switch

If correct focus cannot be obtained

Shooting

Turn on the power in the mode.

Position the AF target mark on the

subject you want to focus on.

Press

Monitor

Determine the position of the subject after focusing (Focus Lock)

When the subject you want to focus on is not in the center of the frame and you cannot

position the AF target mark on it, you can focus the camera on another point at roughly

the same distance (focus lock) and take the picture as explained below.

AF target mark

If correct focus cannot be obtained

Shooting

If the focus lock does not work

properly

~“AF MODE — Changing the

focus range” (P. 63)

The focus, exposure and white

balance are locked (autofocus).

Keep the shutter button pressed

halfway until the green lamp lights.

Keeping the

shutter

button

pressed

halfway,

recompose

your shot.

When shooting a hard-to-focus

subject, point the camera at an

object about the same distance

away as the subject.

Half press

~“If the green lamp blinks when

the shutter button is pressed

halfway” (P. 33)

Full press

Compose your shot.

Shooting

Zoom

Telephoto and wide-angle shooting are possible at 3x magnification for optical zoom

(equivalent to 38 mm to 114 mm on a 35 mm film camera). By combining the optical

zoom with the digital zoom, zoom magnification can be increased to a maximum of

approximately 8x. ~“DIGITAL ZOOM — Using the digital zoom” (P. 60)

Turn on the power in the mode.

Press the zoom button.

Take the picture.

Zoom button (W)

Zoom button (T)

Camera movement is likely to occur at higher magnification during telephoto

shooting. Stabilize the camera with a tripod, etc. to avoid camera movement.

Notes on using the zoom

Press

Mode switch

POWER switch

Using the situation-related shooting modes

Make sure SCENE SELECT is selected,

and confirm it.

Select SCENE.

PROGRAM

AUTO

SCENE

SCENE SELECTSCENE SELECT

CANCEL SELECT

BACK

To return to the basic shooting

mode (Program Auto), select

PROGRAM AUTO.

SCENE

SCENE SELECT

PROGRAM

AUTO

CANCEL SELECT

BACK

Rotate to

select

MENU/OK

Press

MENU/OK

Press

PROGRAM AUTO shooting

The camera automatically optimizes

settings to match the shooting

conditions. This is the basic

shooting mode suited for any

shooting situation.

Using the situation-related shooting modes

LANDSCAPE

For shooting

landscapes.

Vivid reproduction

of blues and greens.

SELECT

Currently

selected mode

A description of suitable shooting

conditions for the selected mode

replaces the sample image.

To change the current camera

settings

~“Using your camera effectively”

(P. 114)

Select the shooting mode.

Rotate to

select

MENU/OK

Press

The corresponding icon appears.

The menu screen disappears and

the shooting screen appears.

A sample image of the selected

shooting mode is displayed.

Using the situation-related shooting modes

LANDSCAPE

Suitable for shooting landscapes and other

outdoor scenes.

LANDSCAPE+PORTRAIT

Suitable for shooting both main subject and

background.

NIGHT SCENE

Suitable for shooting images of outdoor

scenes in the evening or at night.

Usually a street at night makes a dark

image with only the sparkle of lights such as

street lamps due to the lack of brightness.

This mode allows you to capture the true

appearance of the street.

•Since the shutter speed is slow, be sure to

stabilize the camera by using a tripod.

Using the situation-related shooting modes

NIGHT+PORTRAIT

Suitable for shooting both the main subject

and background at night.

•Since the shutter speed is slow, be sure to

stabilize the camera by using a tripod.

•The flash fires in the red-eye reduction mode.

~“Flash” (P. 58)

INDOOR

Suitable for shooting both the main subject

and background indoors. Clear reproduction

of background as well.

•SUPER HIGH and HIGH cannot be selected.

~“Selecting the record mode” (P. 66)

FIREWORKS

Suitable for shooting fireworks.

Using the situation-related shooting modes

SUNSET

Suitable for taking sunset pictures.

Vivid red and yellow color reproduction.

•The flash cannot be used.

PORTRAIT

Suitable for shooting a portrait-style image

of a person.

SELF PORTRAIT

Allows you to take a picture of yourself while

holding the camera. The focus is locked on

you (shooter).

•Zoom position is fixed at W.

Using the situation-related shooting modes

MACRO

For shooting from as close as 30 - 50 cm

(11.8" - 20.0") to a subject.

•If you use the flash, shadows may be noticeable

and the correct exposure may not be achieved.

SUPER MACRO

For shooting from as close as approx. 8 cm

(3.2") to a subject.

•The flash cannot be used.

•Zoom cannot be used.

CUISINE

Suitable for still life photography. Vividly

reproduces colors of fruit, vegetables,

flowers, etc.

•The red-eye reduction mode is not available.

Using the situation-related shooting modes

BEACH & SNOW

Suitable for shooting snow-capped

mountain landscapes, white sand beaches,

seascapes, etc.

SELF PORTRAIT+SELF TIMER

Useful when shooting pictures while

traveling. Use the self-timer to take a picture

of yourself and the background.

•AF MODE cannot be set to SPOT.

~“AF MODE — Changing the focus range”

(P. 63)

CANDLE

Suitable for shooting under candlelight.

Warm colors are reproduced.

•The flash cannot be used.

•SUPER HIGH and HIGH cannot be selected.

~“Selecting the record mode” (P. 66)

Using the situation-related shooting modes

AVAILABLE LIGHT PORTRAIT

Suitable for shooting sensitive subjects in

lowlight conditions without a flash.

•The flash cannot be used.

•SUPER HIGH and HIGH cannot be selected.

~“Selecting the record mode” (P. 66)

BEHIND GLASS

Suitable for shooting a subject through

glass.

Using the situation-related shooting modes

2 IN 1

Allows you to combine two pictures taken in

succession and store them as a single

picture.

•Sequential shooting is not possible.

•Self-timer shooting and sound recording are not

available.

1Select 2 IN 1. ~P. 4 2

2Take the first shot.

•The subject will be on the left in the combined

image.

•To cancel the first shot, press BACK/NEXT.

3Take the second shot in succession.

•The pictures are combined and stored as a single

picture.

•The subject will be on the right in the combined

image.

•To exit the 2-IN-1 shooting mode, press MENU/OK

and select another situation-related shooting mode

in the menu. ~P. 42

First shot Second shot

BACK/NEXT

button

1st

2nd

Shutter button

MENU/OK button

Using the situation-related shooting modes

PANORAMA

You can take advantage of panorama shooting when you use an Olympus

xD-Picture Card. Pictures with overlapping edges can be connected to form

a single panoramic image with CAMEDIA Master software (included on the

provided CD-ROM).

1Select PANORAMA. ~P. 4 2

2Use the control dial to select the direction you

want the images connected.

•Frames and arrows appear in the corresponding direction.

3Make sure that the edges of images overlap, then take your pictures.

•Panorama shooting is possible for up to 10 pictures.

First shot Second shot Third shot

Focus, exposure and white balance

are set by the first shot.

Keeping the area in the frame at the edge of the screen in mind, position the camera so that

the same area appears in the frame for the next image.

Zooming is not possible

after the first shot.

Example: When connecting images from left to right.

BACK/NEXT button

Control dial

Left to Right Top to Bottom Right to Left Bottom to Top

Shutter button

Using the situation-related shooting modes

4Press BACK/NEXT to finish panorama shooting.

•The camera is ready to take another set of panorama shots.

•To exit the PANORAMA shooting mode, press MENU/OK and select another shooting

mode in the menu. ~P. 42

•Panorama shooting is possible only when using the Olympus CAMEDIA-brand card.

•If SUPER HIGH or HIGH is selected, there may be cases where there is not enough

memory to process the images on your computer. It is recommended to use BASIC or E-

MAIL for panorama shooting. ~“Selecting the record mode” (P. 66).

•The following functions are not available during panorama shooting: flash shooting,

sequential shooting, self-timer shooting, sound recording

Selecting functions from the shooting menu

Using the advanced shooting functions

Turn on the camera in the or

mode.

Display the menu.

Press

MENU/OK

Press

SCENE SELECT

FLASH MODE

OFF

AUTO

RESET

EXIT SELECT GO

BACK

The operation guide is displayed.

Press

Returns to the previous menu screen.

(Exits the step menu screen.)

Rotate to select

Selects the item.

Press to confirm

Confirms your selection.

EXIT

BACK

BACK/NEXT

SELECT

MENU/OK

The current setting is displayed.

Mode switch

Control dial

POWER switch

BACK/NEXT

button

MENU/OK button

Selecting functions from the shooting menu

Using the advanced shooting functions

SCENE SELECT

FLASH MODE

OFF

AUTO

RESET

EXIT SELECT

BACK

AUTO

SCENE SELECT

FLASH MODE

RESET

CANCEL SELECT

BACK

Rotate to

select

MENU/OK

Press

Indicates that there are more menu

items following .

Currently selected item

The options for the selected item are

displayed.

Select the item.

Select the option and confirm it.

AUTO

SCENE SELECT

FLASH MODE

RESET

CANCEL SELECT

BACK

Rotate to

select

The menu screen disappears and

the shooting screen appears.

The icon corresponding to the setting

is displayed. (The red-eye reduction

icon is displayed here.)

MENU/OK

Press

Selecting functions from the shooting menu

Using the advanced shooting functions

Flash

You can select from 4 different flash modes depending on the light conditions and the

effect you want to achieve.

The subject’s eyes

appear red.

Auto-flash (No indication)

Automatically fires in low-light and backlight conditions.

Red-eye reduction flash ()

The light from the flash may make the

subject’s eyes appear red in the image.

The red-eye reduction flash mode

significantly reduces this phenomenon

by emitting pre-flashes before firing the

regular flash. This helps accustom the

subject’s eyes to the bright light and

minimizes the red-eye phenomenon.

Fill-in flash ()

The flash fires regardless of available

light. This mode is useful for eliminating

shadows on the subject’s face (such as

shadows from tree leaves) or for

correcting the color shift produced by

artificial lighting (especially fluorescent

light).

Flash off ()

The flash does not fire even in low light conditions. Use this mode in situations

where flash photography is not desired or is prohibited. You can also use this

mode when you want to shoot a natural-looking twilight or night scene.

●When using a situation-related shooting mode (~P. 45), the flash may not be

used.

●The flash cannot be used during movie recording. ~P. 36

●When there is a likelihood that camera movement will occur in the flash off

mode, the (camera movement warning) mark blinks. Use the flash.

Red-eye reduction flash ()

●The red-eye reduction flash cannot be used during sequential shooting.

~P. 61

●After the pre-flash, it takes approximately 1 second before the shutter is

released. Hold the camera firmly after the pre-flash to prevent camera

movement.

●Effectiveness may be limited if the subject is not looking directly at the pre-

flashes, or if the shooting range is too far. Individual physical characteristics may

also limit effectiveness.

Fill-in flash ()

●Fill-in flash may not have the desired effect under excessively bright light.

Flash off ()

●Since a slow shutter speed is automatically selected in low-light situations when

in the flash off mode, the use of a tripod is recommended to prevent your

pictures from being blurred by camera movement.

Selecting functions from the shooting menu

Using the advanced shooting functions

Select FLASH MODE in the menu, then

select the flash mode. ~P. 55

Press the shutter button halfway.

Press the shutter

button all the way

down (fully) to take

the picture.

Flash working range

W (max.) : Approx. 0.3 m - 3.6 m

(1.0 ft - 11.8 ft)

T (max.) : Approx. 0.3 m - 2.0 m

(1.0 ft - 6.6 ft)

Shutter button Control dial

The icon of the

selected flash mode

The (flash stand-by) mark lights

when the flash is ready to fire. If the

mark is blinking, the flash is charging.

Wait until charging is complete.

Half press

Full press

Notes on flash

BACK/NEXT

button

MENU/OK button

Selecting functions from the shooting menu

Using the advanced shooting functions

DIGITAL ZOOM — Using the digital zoom

By combining the optical zoom with the digital zoom, zoom magnification can be

increased to a maximum of approximately 8x.

Select DIGITAL ZOOM in the menu,

then select ON. ~P. 5 5

Press the zoom button (T ).

Control dial

BACK/NEXT

button

MENU/OK button

OFF

METERING

DIGITAL ZOOM

CANCEL SELECT

BACK

●Pictures taken using digital zoom may appear grainy.

●Camera movement is likely to occur at higher magnification during telephoto

shooting. Stabilize the camera with a tripod, etc. to avoid camera movement.

●The digital zoom cannot be used when the shooting mode is set to SUPER

MACRO (~P. 48) or SELF PORTRAIT (~P. 47).

Notes on digital zoom

Zoom button (T )

If the digital zoom is set to ON, a

red area appears on the zoom

indicator. When you reach the limit

of the optical zoom, the digital zoom

is enabled.

Rotate to

select

MENU/OK

Press to confirm

Selecting functions from the shooting menu

Using the advanced shooting functions

Sequential shooting

You can shoot pictures sequentially. In the SUPER HIGH record mode, approximately 3

frames can be shot in sequence.

Select in the menu, then select ON.

~P. 55

Take pictures.

OFF

METERING

CANCEL SELECT

BACK

DIGITAL ZOOM

The camera takes pictures in

sequence while the shutter button is

being pressed down. Releasing the

shutter button stops sequential

shooting.

Focus and exposure are locked

at the first shot.

White balance is adjusted for each shot.

Rotate to

select

MENU/OK

Press to confirm

●Sequential shooting is not possible depending on which situation-related shooting

mode is selected.

●Sound recording is not available during sequential shooting.

Notes on sequential shooting

Shutter button Control dial

BACK/NEXT

button

MENU/OK button

Selecting functions from the shooting menu

Using the advanced shooting functions

Self-timer shooting

This feature allows you to take pictures with yourself in them. Stabilize the camera

with a tripod.

Select in the menu, then select ON.

~P. 55

Take the picture.

OFF

SCENE SELECT

FLASH MODE

RESET

CANCEL SELECT

BACK

The self-timer lamp lights up for

approximately 10 secconds, then

blinks for approximately 2 seconds

before the picture is taken.

•To stop the self-timer, press

MENU/OK so that the self-timer

lamp goes off.

• The self-timer is canceled

automatically when shooting is

finished.

Rotate to

select

MENU/OK

Press to confirm

Self-timer shooting is not possible when the shooting mode is set to 2 IN 1

(~P. 52) or PANORAMA (~P. 53).

Notes on self-timer shooting

The mark is displayed.

Shutter button Control dial

BACK/NEXT

button

MENU/OK button

Selecting functions from the shooting menu

Using the advanced shooting functions

Select in the menu. ~P. 55

Adjust the exposure.

Take the picture.

AUTOAUTO

OFFOFF

0.00.0

METERING

DIGITAL ZOOM

EXIT SELECT

BACK

●If the flash is used, the image brightness (exposure) may differ from the intended

brightness.

●Exposure compensation cannot correct the image if the surroundings of the subject

are extremely bright or dark.

Notes on exposure compensation

0.00.0

CANCEL SELECT

BACK

Adjusts towards + to make the

image brighter, or – to make the

image darker.

Varying the image brightness (Exposure Compensation)

In some situations, you may get better results when the exposure that the camera sets is

compensated (adjusted) manually. Often bright subjects (such as snow) will turn out

darker than their natural colors. Adjusting toward + makes these subjects closer to their

real shades. For the same reason, adjust toward – when shooting dark subjects.

Exposure can be adjusted in the range of ±2.0 EV in 1/3 EV steps.

–2.0 +2.00.0

Rotate to

select

MENU/OK

Press to confirm

Rotate to

select

MENU/OK

Press to confirm

Shutter button Control dial

BACK/NEXT

button

MENU/OK button

Using the advanced shooting functions

Selecting functions from the shooting menu

SH SUPER HIGH 3M

2048 X 1536 pixels

Lower number of storable pictures,

longer time to save. For printing in

larger size or image retouching (such

as adjusting the contrast or reducing

red-eye phenomenon) on a computer.

Approx. 20

Larger file size, clearer image quality

Number of storable

still pictures with a

16MB card

Approx. 33

Approx. 99

Approx. 58

H HIGH 2M

1600 X 1200 pixels

E-MAIL VGA

640 X 480 pixels

For printing in smaller size or image

editing (such as adding text or

rotating images) on a computer.

Standard quality, smaller file size,

larger number of storable pictures.

For viewing images on a computer.

Standard quality, small file size. For

attaching to e-mail.

Smaller file size, normal image quality

The number of remaining pictures may change according to the subject or factors

like whether print reservations have been made or not. In certain instances, the

number of remaining pictures displayed on the monitor does not change even

when you take pictures or stored images are erased.

Notes on record mode

The number of pixels (horizontal x vertical) used when saving an image. If the image is going to

be printed, higher resolutions (larger numbers) are recommended so that the image will be

clearer. However, higher resolutions make the file size (amount of data) larger, so fewer

pictures can be saved.

Resolution

When a picture is transferred to a computer, the size of the picture on the computer screen

varies depending on the computer’s monitor setting. For instance, a picture taken in 1024 x 768

resolution is the same size as the screen if you set the picture to 1x when the monitor setting is

1024 x 768. However, if the monitor setting is over 1024 x 768 (such as 1280 x 1024), the

picture only takes up part of the screen.

Resolution and picture size on a computer screen

B BASIC 1M

1024 X 768 pixels

Selecting functions from the shooting menu

Using the advanced shooting functions

WB — Adjusting the color tone

Color reproduction differs depending on the light conditions. For instance, when

daylight, the setting sun or tungsten lighting are reflected on white paper, the shade of

white produced will be slightly different for each. By setting the WB (white balance),

you can achieve more natural-looking colors.

Select WB in the menu. ~P. 5 5

Select the white balance.

Take the picture.

●White balance may not be effective under certain light sources.

●After setting a white balance other than AUTO, play back the image and check

the colors on the monitor. ~“Playback” (P. 72)

●When the flash is fired with a white balance setting other than AUTO, colors may

appear different in the resulting image from the colors you see on the monitor.

●White balance is determined automatically by the camera if a situation-related

shooting mode (~P. 42) is selected.

Notes on white balance

AUTO

METERING

DIGITAL ZOOM

CANCEL SELECT

BACK

For natural colors under a cloudy sky.

For natural colors under tungsten

lighting.

For natural colors under fluorescent

lighting.

The white balance is adjusted

automatically so that colors look natural

irrespective of the light source.

For natural colors under a clear sky.

AUTO

OFF

0.0

METERING

DIGITAL ZOOM

EXIT SELECT

BACK

Rotate to

select

MENU/OK

Press to confirm

Rotate to

select

MENU/OK

Press to confirm

Shutter button Control dial

BACK/NEXT

button

MENU/OK button

Enlarge the image.

~“Close-up playback”(P. 73)

Use the control dial to displace the image horizontally.

To displace the picture vertically, press MENU/OK, then

rotate the control dial.

Playback

Close-up playback

1.5x1.5x

Display area

Entire image

1.5x1.5x

Control dial

MENU/OK button

Rotate to

select

Rotate to

select

The display area

moves to the left.

The display area

moves to the right.

1.5x

Rotate to

select

Rotate to

select

The display

area moves to

the top.

Entire image

Display area

Displacing the image

During close-up playback, you can displace the image vertically and horizontally and

display the adjusted image.

When the image reaches

the right (left) end, í(É)

disappears.

The display

area moves to

the bottom.

MENU/OK

Press

When the image reaches the top

(bottom) end, Ñ(ñ) disappears.

Playback

Index display

Play back an image.

~“Viewing still images”(P. 72)

5353

5656

5151

5454

5757

5252

5555

5858

5050

NEXTNEXT

PAGE

Lets you show several images at the same time on the monitor. It is useful when you

want to quickly search a number of images to find a particular one.

•The 9-frame index screen is

displayed.

•You can also select the number of

images on an index screen from 4,

16 or 25. ~“Selecting the

number of images” (P. 126)

Press

Press the zoom

button .

10000–00500050

’04.01.01.00:00

3M3M

FILEFILE

NEXTNEXT

JUMP

Control dial

Zoom button

BACK/NEXT

button

Playback

Index display

Rotate the control dial to move the

frame to the desired image.

Press BACK/NEXT to switch the

playback method to page selection

mode.

BACK/NEXT

Press

5353

5656

5151

5454

5757

5252

5555

5858

5050

NEXTNEXT

PAGE

Rotate to

select

Press the zoom button . The

screen returns to single-frame

playback.

100

–0052

0052

’04.01.02.00:00

04.01.02.00:00

FILE

JUMP

Press

Playback

Selecting functions from the playback menu

A number of useful menu functions are available in the playback mode (as shown below).

Follow the basic procedure described on page 80 before you go to the particular

instructions for each function.

0˚

SETUP

SEL.ALBUM

ALBUM ENTRY

ERASE

EDIT

EXIT SELECT

BACK

EXIT SELECT

BACK

EXIT SELECT

BACK

ALL ERASE

FORMAT

OFFOFF

~“SEL. ALBUM — Viewing images in an album” (P. 108)

~P. 93

~“Selecting the print

reservation mode” (P. 133)

~P. 99

~P. 82

~“ALBUM ENTRY

— Registering

images you shot”

(P. 104)

~P. 92

~P. 86

~P. 96

~P. 97

~P. 103

~“Using your

camera effectively”

(P. 114)

Still image playback menu

Playback

Selecting functions from the playback menu

Turn on the camera in the mode.

Display the menu.

Press

Mode switch

Control dial

POWER switch

BACK/NEXT button

MENU/OK

Press

SEL.ALBUM

ALBUM ENTRY

ERASE

EXIT SELECT

BACK

OFFOFF

The current setting is displayed.

Press

Returns to the previous menu screen. (Exits

the menu screen from step 2 here.)

Rotate to select

Selects the item.

Press to confirm

Confirms your selection.

The operation guide is displayed.

MENU/OK button

EXIT

BACK

BACK/NEXT

Press

Returns to the previous menu screen.

(Exits the step menu screen.)

SELECT

Rotate to select

Selects the item.

MENU/OK

Press to confirm

Confirms your selection.

Playback

Selecting functions from the playback menu

SEL.ALBUM

ALBUM ENTRY

EXIT SELECT

BACK

OFF

ERASE

OFF

SEL.ALBUM

ALBUM ENTRY

CANCEL SELECT

BACK

ERASE

Rotate to

select

MENU/OK

Press

Indicates there are more menu items

following .

Currently selected item

The options for the selected item are

displayed.

Select the item.

Select the option and confirm it.

OFF

SEL.ALBUM

ALBUM ENTRY

CANCEL SELECT

BACK

ERASE

Rotate to

select

The menu screen disappears and

the playback screen appears.

The corresponding icon is displayed.

(The mark is displayed here.)

MENU/OK

Press

Playback

Selecting functions from the playback menu

Select in the menu. ~P. 7 8

Selecting the image

Select SEL. IMAGE.

START

SEL. IMAGE

TYPE

NORMALNORMAL

ALL IMAGESALL IMAGES

CANCEL SELECT

BACK

START

SEL. IMAGE

TYPE

NORMALNORMAL

ALL IMAGESALL IMAGES

CANCEL SELECT

BACK

Rotate to

select

ALBUM

ALL IMAGES

START

SEL. IMAGE

TYPE

CANCEL SELECT

BACK

ALL IMAGES: Slideshow of all the

images stored in the card.

ALBUM: Slideshow of all the

images stored in the album.

~“Slideshow (sequential auto

playback of images in an album)”

(P. 109)

Rotate to

select

MENU/OK

Press to confirm

MENU/OK

Press to confirm

Control dial

BACK/NEXT

button

MENU/OK button

Product specificaties

Merk:	Olympus
Categorie:	Digitale camera
Model:	Ferrari Digital Model 2004
Kleur van het product:	Rood
Gewicht:	160 g
Stroomvoorziening:	D-7AC, AC 100V – 240V, 50 – 60Hz; DC 4.8V
Beeldscherm:	LCD
Beeldschermdiagonaal:	2.5 "
Video recording:	Ja
Compatibele geheugenkaarten:	xd
Megapixels:	3.2 MP
Maximale beeldresolutie:	2048 x 1536 Pixels
Type beeldsensor:	CCD
Beeldsensorformaat:	1/2.7 "
Digitale zoom:	2.7 x
Optische zoom:	3 x
Gecombineerde zoom:	3 x
Camera sluitertijd:	1/2 – 1/725 s
Ingebouwde flitser:	Ja
Interface:	USB
Flitser-modi:	Auto, Fill-in, Red-eye reduction
Maximale videoresolutie:	320 x 240 Pixels
Beeldschermresolutie (numeriek):	215.000 Pixels
Meegeleverde software:	CAMEDIA Master 4.2
Aansluitingen:	DC \nUSB 2.0\nAudio/Video
PictBridge:	Ja
Afmetingen (B x D x H):	94 x 67 x 21.9 mm
Lenssysteem:	9 / 7
Datacompressie:	QuickTime Motion JPEG
Batterijtechnologie:	Lithium-Ion (Li-Ion)
Type batterij:	LI-20B
Specificaties CCD beeldsensor:	CCD 1/2.7, 3.34