Olympus Camedia C-500 Zoom Handleiding

Olympus Niet gecategoriseerd Camedia C-500 Zoom

Lees hieronder de 📖 handleiding in het Nederlandse voor Olympus Camedia C-500 Zoom (156 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 193 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/156
Thank you for purchasing an Olympus digital camera. Before you start to use your
new camera, please read these instructions carefully to enjoy optimum performance
and a longer service life. Keep this manual in a safe place for future reference.
We recommend that you take test shots to get accustomed to your camera before
taking important photographs.
In the interest of continually improving products, Olympus reserves the right to update
or modify information contained in this manual.
DIGITAL CAMERA
Advanced
Manual
D-595 ZOOM
C-500 ZOOM
Detailed explanations of all the
functions for getting the most out
of your camera.
Camera Settings
Basic Operation
Shooting
Playing Back
Printing
Online Pictures
Troubleshooting
2
How to use this manual
(Basic and Advanced Manuals
The instruction manual accompanying this camera is divided into two
parts: the Basic Manual and the Advanced Manual (this document).
(Indications used in this manual
Below is an explanation of how to read the instructions in this manual.
Please read it carefully before proceeding.
For details on notation and how to read the procedure pages, see
“How to read the procedure pages”. (P. 21)
Basic
Manual
This manual helps you get used to the camera. It gives you easy-to-
follow explanations on how to take pictures and view them.
Advanced
Manual
This manual introduces you to the camera’s many functions after you
have mastered the basics. It will help you to use the camera’s
capabilities to take much more creative pictures, with more fun!
Note
Important information on factors which may lead to a malfunction or operational
problems. Also warns of operations that should be absolutely avoided.
TIPS
Useful information and hints that will help you get the most out of your camera.
g
Reference pages describing details or associated information.
3
Composition of the manual
The title page of each chapter gives a short description of the contents.
Be sure to check it out.
Basic operation
Tips before you start
taking pictures
Basic shooting
functions
Playback
Settings
Printing pictures
Connecting the camera
to a computer
Appendix
Miscellaneous
Troubleshooting.
For when you want to know
the names of parts, see a list
of menus, or find what you are
looking for.
You’ll find important points for
getting the most out of your
camera here.
Read this part before taking
pictures.
Explanations of techniques
from basics to advanced,
giving you an understanding of
all the functions related to
taking pictures.
To view, edit and sort the
pictures you have taken.
Settings to make your camera
easier to use.
To print the pictures you have
taken.
To enjoy the pictures you have
taken on a computer. To use
OLYMPUS Master.
P. 8
P. 22
P. 34
P. 45
P. 60
P. 80
P. 91
P. 105
P. 121
P. 138
Table of Contents P. 4
Additional shooting
functions
1
2
3
4
5
6
7
8
9
10
4
Table of Contents
How to use this manual....................................................................... 2
Composition of the manual ................................................................. 3
1 Basic operation - - - - - - - - - - - - - - - - - - - - - - -8
How to use the shooting button and playback button ......................... 9
How to use the mode dial.................................................................. 12
How to use the direct buttons............................................................ 13
Using the direct buttons .............................................................. 15
How to use the menus ...................................................................... 16
About the menus......................................................................... 16
Using the menus ......................................................................... 19
How to read the procedure pages..................................................... 21
2 Tips before you start taking pictures - - - - - -22
Holding the camera........................................................................... 23
When to use the monitor and viewfinder..................................... 24
If correct focus cannot be obtained................................................... 25
How to focus (focus lock) ............................................................ 25
Subjects that are difficult to focus on .......................................... 26
Record mode .............................................................................. 27
Still picture record modes............................................................ 27
Movie record modes.................................................................... 28
Number of storable still pictures/remaining recording time ......... 28
To change the record mode........................................................ 29
Recording pictures ............................................................................ 30
Relationship between the internal memory and the card............ 30
Using a card (optional)...................................................................... 31
Card basics ................................................................................. 31
Inserting a card ........................................................................... 31
3 Basic shooting functions- - - - - - - - - - - - - - -34
Selecting a shooting mode according to the situation....................... 35
Selecting scene modes by subject (SCENE SELECT)............... 37
Zooming in on a distant subject ........................................................ 39
Using the digital zoom................................................................. 40
Taking close-up pictures (macro/super macro) .................... 41
Flash shooting .............................................................................. 42
Adjusting picture brightness (exposure compensation) .................... 44
Table of Contents
5
4 Additional shooting functions - - - - - - - - - - -45
Setting the aperture and shutter speed (manual shooting) ......... 46
Selecting light measurement points .................................. 46
Taking pictures in low light conditions (ISO) ..................................... 47
Adjusting picture coloration ...................................................... 48
One-touch white balance ..................................................... 49
Recording movies ....................................................................... 50
Recording sound with movies ................................................ 51
Sequential shooting .................................................................. 52
Self-timer shooting ..................................................................... 53
Function shooting (BLACK & WHITE/SEPIA/VIVID)......................... 54
Panorama shooting ........................................................................... 55
Taking two-in-one pictures ................................................................ 57
Recording sound with still pictures ............................................... 58
Noise reduction .......................................................................... 59
5 Playback - - - - - - - - - - - - - - - - - - - - - - - - - - -60
Playing back still pictures .................................................................. 61
Selecting the number of pictures .......................................... 62
Picture rotation ...................................................................... 62
Slideshow ............................................................................ 63
Playing back movies ................................................................... 65
Editing still pictures (ADD FRAME/BLACK & WHITE/SEPIA/ ).... 66
Adding sound to still pictures ................................................. 68
Editing movies................................................................................... 69
Creating an index........................................................................ 69
Editing a movie............................................................................ 70
Playing back pictures on a TV........................................................... 72
Selecting the video output ........................................................... 73
Displaying detailed shooting information ............................... 74
Protecting pictures ...................................................................... 75
Copying pictures to a card (BACKUP) .............................................. 76
Erasing pictures .................................................................... 77
Single-frame erase ................................................................ 77
All-frame erase .................................................................... 78
Formatting ............................................................................. 79
Table of Contents
6
6 Settings- - - - - - - - - - - - - - - - - - - - - - - - - - - -80
Saving camera settings (ALL RESET) .............................................. 81
Changing the display language .............................................. 82
Selecting a power on screen (PW ON SETUP) ................................ 83
Registering a power on screen (SCREEN SETUP) .................... 84
Viewing pictures immediately (REC VIEW)....................................... 85
Setting warning sounds ............................................................. 85
Setting operation sounds (BEEP) ..................................................... 86
Setting the shutter sound (SHUTTER SOUND)................................ 86
Setting the playback volume (VOLUME)........................................... 87
Resetting the file name (FILE NAME) ............................................... 88
Checking the image processing function (PIXEL MAPPING) ........... 89
Adjusting the brightness of the monitor ..................................... 89
Setting the date and time .......................................................... 90
7 Printing pictures - - - - - - - - - - - - - - - - - - - - -91
Direct printing (PictBridge) ................................................................ 92
Using the direct printing function................................................. 92
Printing pictures .......................................................................... 93
Other print modes and print settings ........................................... 96
If an error code is displayed........................................................ 98
Print settings (DPOF) .................................................................. 99
How to make print reservations................................................... 99
Single-frame reservation ..................................................... 101
All-frame reservation .......................................................... 102
Resetting print reservation data .......................................... 103
8 Connecting the camera to a computer - - - - 105
Flow................................................................................................. 106
Using OLYMPUS Master ................................................................ 107
What is OLYMPUS Master?...................................................... 107
Installing OLYMPUS Master ..................................................... 108
Connecting the camera to a computer ............................................ 112
Starting up OLYMPUS Master ........................................................ 113
Displaying camera images on a computer...................................... 115
Downloading and saving images .............................................. 115
Viewing still pictures and movies .................................................... 117
Printing pictures .............................................................................. 118
To download and save images to a computer without using
OLYMPUS Master............................................................... 120
Table of Contents
7
9 Appendix - - - - - - - - - - - - - - - - - - - - - - - - - -121
Troubleshooting .............................................................................. 122
Error codes................................................................................ 122
Troubleshooting ........................................................................ 124
Camera care ................................................................................... 130
AC adapter (optional)...................................................................... 131
Safety Precautions .......................................................................... 132
Glossary of terms ............................................................................ 136
10 Miscellaneous - - - - - - - - - - - - - - - - - - - - - 138
Menu list.......................................................................................... 139
List of factory default settings.......................................................... 144
Modes and shooting functions ........................................................ 146
Names of parts................................................................................ 148
Camera ..................................................................................... 148
Monitor indications .................................................................... 150
Index ............................................................................................... 153
8
Sequential shooting
Movies
MONITOR OFF
MODE MENU
WB
AUTO
SELECT GO
OK
HQ
HQ
HQ
HQ
HQ
0.0
0.
0.
0.
0.0
0
0
0
0
0
0
000:
0
0
0
0:
:
:
:
15
15
15
15
15
00:15
Basic operation
Don’t you feel that although your camera
has many attractive functions, you are
unable to use them confidently?
Now all you have to do is simply press the
buttons on your digital camera. By setting
the menus, you can easily do things like
change where the light is metered or adjust
the coloration of your picture.
Just display a menu on the monitor and use
the buttons to choose a setting. Familiarize
yourself with the buttons and menus before
reading the explanations of the various
functions.
1
9
Basic operation
1
How to use the shooting button and
playback button
This camera features a shooting mode and a playback mode. Shooting
mode is for taking pictures and making shooting settings, whereas
playback mode is for displaying pictures you have taken.
To switch between the two modes, use # and $. Press $ on its own, to
turn the camera on in playback mode.
(Turning the camera on in shooting mode
Press the POWER switch.
The camera turns on in shooting mode. You are ready to take pictures.
To turn the camera off
Press the POWER switch. The lens retracts, and the monitor turns off.
To enable playback mode
Press $. The lens remains extended, and playback mode is enabled. Press #
to return to shooting mode.
POWER switch (The monitor turns on.
Shooting button (#)
Playback button ($)
(The lens extends.
How to use the shooting button and playback button
10
1
Basic operation
(Turning the camera on in playback mode
With the camera off, press $.
The camera turns on in playback mode. The last picture taken is displayed on the
monitor.
To turn the camera off
Press the POWER switch. Or else, press $. The monitor turns off.
To enable shooting mode
Press #. The lens extends, and shooting mode is enabled. Press $ to return to
playback mode. The lens remains extended.
Note
When the power is turned on, sometimes the monitor flashes before displaying
the picture. This is not a malfunction.
POWER switch
(The lens is retracted.
(The monitor turns on.
Shooting button (#)
Playback button ($)
How to use the shooting button and playback button
11
Basic operation
1
(Switching between shooting mode and playback mode
Press # or $ to switch between shooting mode and playback mode.
’05
05
05
05
05
.
.
.
..
04
04
04
04
04
.
.
.
..
30 15
30 15
30 15
30 15
30 15
:
:
:
::
30
30
30
30
30
5
5
5
55
100
100
100
100
100
-
-
-
--
0005
0005
0005
0005
0005
HQ
HQ
HQ
HQ
HQ
F2.8
F2.8
F2.8
F2.8
F2.8
1/1000
1/
1/
1/
1/10
10
10
1000
00
00
00
0.0
0.0
0.0
0.0
0.0
HQ
HQ
HQ
HQ
HQ
P
P
P
PP
2560
2560
2560
2560
2560
1920
1920
1920
1920
1920
5
5
5
555
Press $.
To playback
(playback mode)
To take pictures
(shooting mode)
The subject is displayed
on the monitor.
The last picture taken is
displayed on the
monitor.
Press #.
In this manual, the following icons indicate the camera mode necessary for
using functions.
Indicates shooting mode
Indicates playback mode
Shooting mode/Playback mode notation
12
1
Basic operation
How to use the mode dial
This camera is capable of taking still pictures and movies. Use the mode dial
to switch between shooting modes before taking pictures. When the mode dial
is set to a mode, the explanation for that mode is displayed on the monitor.
(About the mode dial
PSuitable for general situations.
hTakes pictures in full auto.
iSuitable for taking portrait-style pictures.
lSuitable for taking pictures of landscapes.
zSuitable for taking pictures at night.
jSuitable for taking moving subjects.
kSuitable for taking your subject in front of a landscape.
fThis function allows you to select from 10 situation-related modes set to the
shooting conditions.
nRecords movies.
MThis function allows you to set the aperture and shutter speed manually.
TIPS
For details of each mode, see “Selecting a shooting mode according to the
situation” (P. 35).
You can change the mode dial before and after turning the camera on.
0.0
0.0
0.0
0.0
0.0
P
P
P
PP
PROGRAM AUTO
For auto shooting
with adjustable control
P
P
P
PP
F2.8
F2.8
F2.8
F2.8
F2.8
1/1000
1/
1/
1/
1/100
100
100
1000
0
0
0
Mode dial
In this manual, the following icons indicate the mode dial position for using
shooting mode functions.
The mode dial is not indicated if the function can be used in multiple modes.
See “List of factory default settings” (P. 144).
This indicates that the function is used with the mode dial set to
n.
Mode dial notation
13
Basic operation
1
How to use the direct buttons
The buttons that can be used in shooting mode and playback mode differ.
(Shooting mode
c$ (Playback) button gP. 11
Enables playback mode
d# g (Flash mode) button P. 42
For selecting the flash mode
e& (Macro) button gP. 41
Enables macro mode or super macro mode
fZoom button gP. 39
W : For wide-angle photography
T : For telephoto photography
gbd (Exposure compensation) buttons gP. 44
For making fine changes to the exposure setting
c
e
d
f
g
How to use the direct buttons
14
1
Basic operation
(Playback mode
c# (Shooting) button gP. 11
Enables shooting mode
dS (Erase) button gP. 77
Erases pictures displayed on the monitor
ey (Rotation) button gP. 62
Rotates pictures you have taken
fZoom button gP. 61
G: For index display
U: For close-up playback
c
e
d
f
How to use the direct buttons
15
Basic operation
1
Basic functions can be easily operated using the direct buttons. Use the arrow pad
and Z to make settings. Follow the buttons displayed on the screen to select and
make each setting.
How to set the flash mode using the # button is shown below.
1Press the # button in shooting mode.
The flash mode selection screen is displayed.
2Press ac to select the flash mode.
3Press Z.
The camera is ready to shoot.
Using the direct buttons
SELECT GO
OK
The flash fires automatically
in low light.
FLASH MODE
AUTO
Current setting
Operation guide
FLASH MODE
AUTO
This function reduces red-eye.
SELECT GO
OK
Selected setting
16
1
Basic operation
How to use the menus
The menu is displayed on the monitor when Z is pressed either in
shooting mode or playback mode. This menu is used to make all camera
settings.
The menu items displayed in shooting mode and playback mode differ.
About the menus
TIPS
In shooting mode, set the mode dial to h, and
press Z to display [SETUP] instead of [MODE
MENU].
g“Setup menu” (P. 18)
Press Z
Mode menu
MONITOR OFF
MODE MENU
Press acb to directly make settings
for the respective functions.
Settings are categorized into tabs by
function.
Top menu
Shortcut menus
Menus are divided into shortcut menus
and mode menus.
SETUP
MONITOR OFF
How to use the menus
17
Basic operation
1
Shortcut menus
MONITOR OFF
MODE MENU
n mode
(for movies)
P M fk j zl i
mode (for still pictures)
MONITOR OFF
MODE MENU
gP. 53
gP. 24
gP. 27 gP. 24
gP. 27
gP. 51
MOVIE PLAY
0
INFO
MODE MENU
MovieStill picture
0
m
INFO
MODE MENU
gP. 75
gP. 74 gP. 74
g gP. 63 P. 65
gP. 75
How to use the menus
18
1
Basic operation
Mode menu
Setup menu
CAMERA
tab
For setting shooting-
related functions. PLAY tab
For making print
reservations and recording
sound.
PICTURE
tab
For making white balance
settings. EDIT tab For editing saved pictures.
MEMORY/
CARD
tab
For formatting the internal
memory or card. For
backing up the internal
memory to the card.
MEMORY/
CARD
tab
For formatting the internal
memory or card and
erasing all frames. For
backing up the internal
memory to the card.
SETUP tab
For making basic camera
settings and settings that
make the camera easier to
use.
SETUP tab
For making basic camera
settings and settings that
make the camera easier to
use.
PIC
SET
CAMERA
OFF
ESPESP/5
Y
j
ISO
DIGITAL ZOOM
MEM
AUTO
OFF
OFF
OFF
CAMERA
tab
PICTURE tab
MEMORY/
CARD tab
SETUP tab
<
EDITMEM
SET
PLAY
R
PLAY tab
EDIT tab
MEMORY/
CARD tab
SETUP tab
SETUP
MEMORY FORMAT
PW ON SETUP
s
ALL RESET ON
ENGLISH
How to use the menus
19
Basic operation
1
Use the arrow pad and Z to select and set menu items.
Follow the operation guide and arrows on the screen to select and make settings.
This section explains how to use the menus.
Ex: Making the [ISO] setting
1Set the mode dial to a mode other than h.
2Press Z in shooting mode.
The top menu is displayed.
3Press d to select [MODE MENU].
TIPS
The [MEMORY] tab is displayed when using the internal memory and the
[CARD] tab is displayed when a card is inserted in the camera.
Menu items common to the setup menu and the mode menus (in shooting
mode and playback mode) apply to the same setting, and the setting can be
made from any mode.
For details of menu items in shooting mode and playback mode, see “Menu list
(P. 139).
Using the menus
acbd buttons
Z button
Mode dial
MONITOR OFF
MODE MENU
Top menu
This refers to the arrow
pad (acbd).
How to use the menus
20
1
Basic operation
4Press ac to select the
[CAMERA] tab, and press d.
Refer to the arrows on the screen to
select a setting with the arrow pad.
5Press ac to select [ISO], and
press d.
Refer to the arrows on the screen to
select a setting with the arrow pad.
Unavailable settings cannot be
selected.
6Press ac to select the ISO
sensitivity from [AUTO], [50], [100],
[200] and [400], and press Z.
Press Z repeatedly to exit the menu.
PIC
SET
CAMERA
OFF
ESP
ESP/5
Y
j
ISO
DIGITAL ZOOM
MEM
AUTO
OFF
OFF
OFF
This refers to the
arrow pad (cd).
OFF
PIC
MEM
SET
CAMERA
ESP
ESP/5
Y
j
ISO
DIGITAL ZOOM
AUTO
OFF
OFF
OFF
The selected item
appears indented.
AUTO
50
100
200
400
PIC
MEM
SET
CAMERA
ESP/5
Y
j
ISO
DIGITAL ZOOM
In this manual, procedures for using the menus are expressed as follows.
Ex: Steps 1 to 5 of making the [ISO] setting
Top menu [MODE MENU] [CAMERA] [ISO]
Menu notation
21
Basic operation
1
How to read the procedure pages
A sample of a procedure page is shown below explaining the notation.
Look at it carefully before taking or viewing pictures.
This sample page is only for your reference. It may differ from the actual page in this
manual.
(This indicates shooting mode or playback mode.
Both modes can be used when both icons are shown.
g“How to use the shooting button and playback button” (P. 9),
“Shooting mode/Playback mode notation” (P. 11)
(Select the menus in the order
indicated by .
g“Using the menus” (P. 19),
“Menu notation” (P. 20)
(Set the mode dial to one of these
symbols.
g“Mode dial notation” (P. 12)
(Available languages vary
depending on the area where you
purchased this camera.
g“Changing the display
language” (P. 82)
(Procedures differ for h mode.
22
start taking pictures
Tips before you start
taking pictures
Your pictures are almost guaranteed to
come out well just by setting the mode dial
to h or P and pressing the shutter
button. But occasionally, you can’t focus on
your subject, or the subject is too dark, or
the picture doesn’t come out the way you
want…
Just knowing which button to press or which
setting to change can help you solve these
problems.
And did you know that by selecting an
image size according to how you plan to use
the pictures afterwards, you can store more
pictures on the memory card? These are
just some of the hints provided in this
chapter.
2
SHQ
SHQ
SHQ
SHQ
SHQ
SQ2
SQ2
SQ2
SQ2
SQ2
SHQ
SQ2
Online applications
Ideas
Ideas
Printing
applications
23
Tips before you start taking pictures
2
Holding the camera
Sometimes when you look at a picture you have taken, the contours of the
subject are blurred. This is often caused by movement of the camera at the
precise moment that the shutter button is pressed.
Picture where subject is not clearly defined
To prevent the camera from moving, hold the camera firmly with both
hands while keeping your elbows at your sides. When taking pictures
with the camera in the vertical position, hold the camera so that the flash
is positioned higher than the lens. Keep your fingers and the strap away
from the lens and flash.
Horizontal grip Vertical grip
Top view
Do not hold this part of the lens.
Holding the camera
24
2
Tips before you start taking pictures
(Features of the monitor and viewfinder
When to use the monitor and viewfinder
Monitor Viewfinder
Advantages
You can check the picture area
that the camera actually
records.
Camera movement does not
occur easily and subjects can be
seen clearly even in bright places.
Little battery power is used.
Disadvantages
Camera movement occurs easily
and subjects may be difficult to
see in bright/dark places. The
monitor uses more battery power
than the viewfinder.
When close to a subject, the
image in the viewfinder differs
slightly from the picture that the
camera actually records.
Tips
Use the monitor when you need to
know the exact area the camera
records, or to take a close-up of a
person or flower (macro shooting).
Use the viewfinder for general
snapshots, landscape pictures
and other casual shots.
Viewfinder
The camera records a wider area than the image in the
viewfinder.
As you get closer to the subject, the actual image recorded
(the shaded area in the illustration on the left) differs
slightly from the image in the viewfinder.
TIPS
To turn the monitor off and take pictures using the viewfinder
In shooting mode, press Z to display the top menu, and press c. The monitor
turns off. Repeat the steps to turn the monitor on.
When the monitor turns off automatically
If the camera is not used for over 3 minutes, the monitor turns off automatically.
To turn the monitor on, press # or the shutter button.
To adjust the brightness of the monitor
Adjust the brightness with the [s] settings. g“Adjusting the brightness
of the monitor” (P. 89)
When the monitor is hard to see
Bright light, such as direct sunlight, may cause vertical lines (smears) to appear
on the image in the monitor. This does not affect recorded pictures.
25
Tips before you start taking pictures
2
If correct focus cannot be obtained
The camera automatically detects the focus target in the frame. The level
of contrast is one of the criteria it uses to detect the subject. The camera
may fail to determine subjects with lower contrast than the surroundings or
with an area of extremely strong contrast in the frame. If this happens, the
simplest solution is to use the focus lock.
1Position the AF target mark on
the subject you want to focus on.
When shooting a hard-to-focus or fast-
moving subject, focus the camera on an
object about the same distance away as
the subject.
2Press the shutter button halfway
until the green lamp lights.
When the focus and exposure are
locked, the green lamp lights.
The AF target mark moves to the focus
position.
When the green lamp blinks, the focus
and exposure are not locked. Release your finger from the shutter button,
re-position the AF target mark on the subject and press the shutter button
halfway again.
3Keeping the shutter button
pressed halfway, recompose
your shot.
How to focus (focus lock)
F2.8
1/1000
0.0
2560
1920
HQ
P
P
P
PP
5
5
5
555
AF target mark
Shutter button
F2.8
1/1000
0.0
HQ
P
P
P
PP
2560
1920
5
5
5
555
Green lamp
If correct focus cannot be obtained
26
2
Tips before you start taking pictures
4Press the shutter button fully.
Under certain types of conditions, the auto focus may not work properly.
In these cases, focus (focus lock) on an object with high contrast at the same
distance as the intended subject, recompose your shot and then take the picture. If
the subject has no vertical lines, hold the camera vertically and focus the camera
using the focus lock function by pressing the shutter button halfway, then return the
camera to the horizontal position while keeping the button pressed halfway and take
the picture.
Subjects that are difficult to focus on
Shutter button
The green lamp blinks.
The subject cannot be
brought into focus.
Subject with
low contrast
Subject with an
extremely bright area in
the center of the frame
Subject without
vertical lines
Subjects at
different
distances
Fast-moving
subject
The subject is
not in the center
of the frame
The green lamp lights,
but the subject cannot
be brought into focus.
27
Tips before you start taking pictures
2
Record mode
You can select a record mode in which to take pictures or shoot movies.
Select the best record mode for your purpose (printing, editing on a
computer, website editing, etc.). For information on the image sizes for
each record mode and memory capacity, see the table on P. 28.
Record mode depicts the image size and compression rate of pictures you wish to
record.
Pictures are made from thousands of dots (pixels). If a picture with relatively few
pixels is enlarged, it looks like a mosaic. A picture with many pixels is denser and
clearer, but requires a larger file size (data size), decreasing the number of pictures
that can be saved. Increasing the compression rate reduces the file size, but makes
the pictures appear grainy.
Image size
The number of pixels (horizontal × vertical) used when saving an image. Save your
pictures in a large image size to get clearer prints.
Compression
Image data is compressed and recorded. The higher the compression, the less clear
the image will be.
Still picture record modes
Image size becomes larger
Image becomes clearer
Application
Compression
Image size
Low
compression
High
compression
Select according
to print size
2560 × 1920 SHQ HQ
1600 × 1200 SQ1
For small-sized
prints and websites
640 × 480 SQ2
Picture with high number of pixels
Picture with low number of pixels
Record mode
28
2
Tips before you start taking pictures
Movies are recorded in Motion-JPEG format.
Still pictures
Movies
Movie record modes
Number of storable still pictures/remaining recording time
Record mode
Image size
Number of storable still pictures
Internal memory Card (Using a
32 MB card)
With sound
Without sound
With sound
Without sound
SHQ 2560 × 1920 3 3 8 8
HQ 2560 × 1920 11 11 25 26
SQ1 1600 × 1200 26 27 60 64
SQ2 640 × 480 108 144 248 331
Record mode
Image size
Remaining recording time (sec.)
Internal memory Card (Using a
32 MB card)
With sound
Without sound
With sound
Without sound
HQ 320 × 240
(30 frames/sec.)
20 sec. 20 sec. 47 sec. 48 sec.
SQ 320 × 240
(15 frames/sec.)
40 sec. 41 sec. 93 sec. 96 sec.
TIPS
When a picture is transferred to a computer, the size of the picture on the
computer screen varies depending on the computer’s monitor setting. For
instance, a picture taken with an image size of 1,024 × 768 fills the screen if
you set the picture to 1× when the monitor setting is 1,024 × 768. However, if
the monitor setting is over 1,024 × 768 (such as 1,280 × 1,024), the picture only
takes up part of the screen.
F2.8
F2.8
F2.8
F2.8
F2.8
1/1000
1/
1/
1/
1/10
10
10
100
0
0
00
0
0
0
0.0
0.0
0.0
0.0
0.0
HQ
HQ
HQ
HQ
HQ
P
P
P
PP
2560
2560
2560
2560
2560
1920
1920
1920
1920
1920
5
5
5
555
Number of storable
still pictures
HQ
HQ
HQ
HQ
HQ
0.0
0.
0.
0.
0.0
0
0
0
0
0
0
000:
0
0
0
0:
:
:
:
15
15
15
15
15
00:15
Remaining recording time
Record mode
29
Tips before you start taking pictures
2
Tips before you start taking pictures
Top menu [K]g“How to use the menus” (P. 16)
1Select [SHQ], [HQ], [SQ1] or
[SQ2], and press Z.
For movies, select [HQ] or [SQ],
and press Z.
Note
The number of storable still pictures and remaining recording times listed in the
table are approximate.
The number of storable still pictures may change according to the subject or
factors like whether print reservations have been made or not. In certain
instances, the number of remaining pictures does not change even when you
take pictures or stored images are erased.
If movies are shot with [VIDEO OUT] set to [PAL] and the AV cable connected,
the movie recording time will differ from the time listed in the “Number of
storable still pictures/remaining recording time” table.
To change the record mode
For still pictures
K
SHQ 2560 1920
SQ2 640 480
SQ1 1600 1200
2560 1920HQ
SELECT GO
OK
For movies
HQ 30fps320 240
SQ 15fps320 240
SELECT GO
OK
K
30
2
Tips before you start taking pictures
Recording pictures
Pictures taken are stored in the internal memory.
You can also use an optional xD-Picture Card (referred to as “card” in this
manual) to store pictures. The card has greater capacity than the internal
memory, and so is able to store more pictures. The card is convenient, for
example, when you are traveling and you want to take a lot of pictures.
(Internal memory basics
The internal memory corresponds to the film of a normal camera for recording
pictures you have taken.
Pictures recorded and stored in the internal memory can easily be erased,
overwritten, and/or edited on a computer. The internal memory cannot be replaced
or removed from the camera.
The monitor displays which memory (internal or card) is being used for shooting and
displaying images.
The internal memory and the card cannot be used at the same time.
When the card is inserted, the internal memory is disabled. When you want to use
the internal memory, remove the card.
You can copy all the image data stored in the internal memory to a card.
g“Copying pictures to a card (BACKUP)” (P. 76)
Relationship between the internal memory and the card
Monitor
indications Shooting mode Playback mode
[IN] Stores to the internal memory. Plays the pictures stored in the
internal memory.
[xD] Stores to the card. Plays the pictures stored on the
card.
’05
05
05
05
05
.
.
.
..
04
04
04
04
04
.
.
.
..
30 15
30 15
30 15
30 15
30 15
:
:
:
::
30
30
30
30
30
5
5
5
55
100
100
100
100
100
-
-
-
--
0005
0005
0005
0005
0005
HQ
HQ
HQ
HQ
HQ
F2.8
F2.8
F2.8
F2.8
F2.8
1/1000
1/
1/
1/
1/10
10
10
1000
00
00
00
0.0
0.0
0.0
0.0
0.0
HQ
HQ
HQ
HQ
HQ
P
P
P
PP
2560
2560
2560
2560
2560
1920
1920
1920
1920
1920
5
5
5
555
Shooting mode Playback mode
Current memory
31
Tips before you start taking pictures
2
Using a card (optional)
An optional card is available for this camera.
The card corresponds to the film of a normal camera for recording the pictures you
have taken.
Pictures recorded and stored on the card can easily be erased, overwritten, and/or
edited on a computer.
Using a card with larger capacity increases the number of pictures you can record.
cIndex area
You can use this space to write the contents of the card.
dContact area
The part where the data transferred from the camera
enters the card.
Compatible cards
xD-Picture Card (16 to 512 MB)
1Make sure the camera is turned
off.
The monitor is off.
The green lamp and the orange lamp
beside the viewfinder are off.
The lens is retracted.
Card basics
Note
This camera may not recognize a non-Olympus card or a card that was
formatted on another device (computer, etc.). Before use, be sure to format the
card on this camera. g“Formatting” (P. 79)
Inserting a card
c
d
Orange lamp
Green lampMonitor
Using a card (optional)
32
2
Tips before you start taking pictures
2Open the card cover.
3Open the card lock.
(Inserting the card
4Orient the card as shown, and
insert it into the card slot as
shown in the illustration.
Insert the card while keeping it
straight.
The card stops with a click when it is
inserted fully.
Inserting the card the wrong way or
at an angle could damage the
contact area or cause the card to
jam.
If the card is not inserted fully, data
may not be written to the card.
Card cover
Card lock
Notch
The position of the card
inserted correctly
Index area
Using a card (optional)
33
Tips before you start taking pictures
2
Tips before you start taking pictures
(Removing the card
4Push the card all the way in
and release slowly.
The card protrudes slightly and
stops.
Grasp the card and remove.
5Close the card lock.
Close the card lock or else the card
cover does not close.
6Close the card cover.
Releasing your finger quickly after
pushing the card all the way in may
cause it to eject forcefully out of
the slot.
Caution
34
unctions
A professional photographer adjusts the
exposure to the optimal setting, chooses the
best focusing method and even selects the
type of film according to the subject.
With a digital camera, you don’t need to
learn how to make difficult settings. Your
camera will adjust the settings for you! All
you have to do is choose a scene mode
according to whether you are taking a
landscape, a night scene, a portrait-style
image or whatever, and the camera will set
the best exposure and white balance.
There’s nothing to it – just press the shutter
button!
3
Basic shooting
functions
CUISINE
SELECT
GO
OK
SUNSET
SELECT
GO
OK
AVAILABLE LIGHT PORTRAIT
SELECT
GO
OK
BEHIND GLASS
SELECT
GO
OK
CANDLE
SELECT
GO
OK
35
3
Basic shooting functions
Selecting a shooting mode according to the situation
Use the mode dial to switch between shooting modes before taking
pictures. You can take pictures with the optimum settings by setting the
mode dial according to the shooting conditions or purpose.
(Shooting mode
P Program Auto
Suitable for general situations. The camera automatically uses settings that captures
the scene in its natural colors. You can set other functions such as exposure
compensation as desired.
h Auto
Takes pictures in full auto.
i Portrait
Suitable for taking a portrait-style shot of a person. This mode is optimum for
reproducing silky skin tones.
l Landscape
Suitable for taking pictures of landscapes and other outdoor scenes. Both the
foreground and the background are in focus. Since blues and greens are vividly
reproduced in this mode, it is excellent for shooting natural scenery.
z Night Scene*
Suitable for shooting pictures in the evening or at night. The camera sets a slower
shutter speed than is used in normal shooting. For example, if you take a picture of
a street at night in P mode, the lack of brightness will result in a dark picture with
only dots of light. In the Night Scene shooting mode, the true appearance of the
street is captured. Since the shutter speed is slow, make sure that you stabilize the
camera by using a tripod.
j Sports
Suitable for capturing fast-moving action (such as sports) without blurring. Even fast-
moving subjects appear to be stationary.
k Landscape+Portrait
Suitable for taking pictures of both your subject and the landscape. The picture is
taken with the background as well as the subject in the foreground in focus. You can
take pictures of your subject against a beautiful sky or landscape.
Selecting a shooting mode according to the situation
36
3
Basic shooting functions
f
This function allows you to select from 10 situation-related modes set to the shooting
conditions.
g“Selecting scene modes by subject (SCENE SELECT)” (P. 37)
n Movie
Records movies. As the focus and zoom are locked while recording, be sure to keep
the distance between the camera and subject constant to avoid losing focus. Sound
is recorded with the movie.
g“Recording movies” (P. 50)
M Manual
This function allows you to set the aperture and shutter speed manually.
g“Setting the aperture and shutter speed (manual shooting)” (P. 46)
* Noise reduction is automatically enabled when the subject is dark. Processing
time between shots is doubled and you cannot take pictures during this time. Also,
the picture is slightly larger than normal.
1Set the mode dial to the desired
icon: P, , h, , i k l, , z
j, or f.
When the mode dial is set to a mode, the
explanation and a sample scene of that
mode is displayed momentarily on the
monitor.
2Take the picture.
TIPS
The settings that can be made vary according to each mode. g“Modes and
shooting functions” (P. 146)
0.0
0.0
0.0
0.0
0.0
P
P
P
PP
PROGRAM AUTO
For auto shooting
with adjustable control
P
P
P
PP
F2.8
F2.8
F2.8
F2.8
F2.8
1/1000
1/
1/
1/
1/10
10
10
1000
00
00
00
Selecting a shooting mode according to the situation
37
3
Basic shooting functions
By setting the mode dial to f, you can select an additional 10 situation-related
modes. Each scene mode features preset settings such as white balance, exposure,
and shutter speed, letting you take pictures just by pressing the shutter button.
(Scene modes
o Self Portrait
Lets you take pictures of yourself while holding the camera. As the camera is set to
focus on a subject that is close, the zoom is locked to wide-angle, and cannot be
changed.
H Indoor
Optimum for taking pictures of gatherings. This mode reproduces the background
clearly capturing the atmosphere.
; Beach
Optimum for taking pictures at the beach under blue skies. This mode reproduces
the colors of the sky, greenery, and people clearly.
: Snow
Optimum for taking pictures on the snowfields. This mode reproduces the colors of
the sky, greenery, and people clearly.
( Fireworks*
Optimum for taking pictures of fireworks in the night sky. Since the shutter speed is
slow, stabilize the camera before taking pictures.
* Sunset*
Optimum for taking pictures of the setting sun. This mode reproduces reds and
yellows vibrantly. Since the shutter speed is slow, stabilize the camera before taking
pictures.
Selecting scene modes by subject (SCENE SELECT)
Selecting a shooting mode according to the situation
38
3
Basic shooting functions
G Cuisine
Optimum for taking pictures of your favorite dishes. This mode clearly reproduces
the different colors found in cooking.
& Candle*
Optimum for taking pictures with the ambience that candle light creates. This mode
reproduces warm colors. Since the shutter speed is slow, stabilize the camera
before taking pictures.
, Behind Glass
Optimum for taking pictures of subjects through glass.
) Available Light Portrait*
This mode lets you take pictures in low light without using the flash. Since the shutter
speed is slow, stabilize the camera before taking pictures.
* Noise reduction is automatically enabled when the subject is dark. Processing
time between shots is doubled and you cannot take pictures during this time. Also,
the picture is slightly larger than normal.
Top menu
[SCENE SELECT] g“How to use the menus” (P. 16)
1
Press
ac
to select a scene mode,
and press
Z
.
When you choose a scene type, a
sample scene is displayed on the right
of the screen.
CUISINE
SELECT
GO
OK
39
3
Basic shooting functions
Zooming in on a distant subject
You can zoom in on your subject using the optical zoom and digital zoom.
With the optical zoom, the image is enlarged on the CCD when the lens
magnification is changed, and the image is formed by all the CCD pixels.
With the digital zoom, the area at the center of the image captured by the
CCD is cropped and enlarged. When you zoom in on a subject, you are
essentially taking a small area of the picture and making it bigger.
Therefore, the greater the magnification with the digital zoom, the grainier
the resulting picture will be.
The following zoom magnifications are available on this camera.
Optical zoom 3× (equivalent to 38 mm to 114 mm on a 35 mm
camera)
Optical zoom × digital zoom Max. 12×
Note that camera movement is likely to occur at higher magnifications.
1Press the zoom button. Zoom button
Zoom out:
Press W on the zoom button.
Zoom in:
Press T on the zoom button.
Zooming in on a distant subject
40
3
Basic shooting functions
To use the digital zoom, set [DIGITAL ZOOM] to [ON].
Top menu [MODE MENU] [CAMERA] [DIGITAL ZOOM]
g
“How to use the menus” (P. 16)
1Select [ON], and press Z.
2Press T on the zoom button.
Using the digital zoom
Note
The picture may appear grainy when taken inside the digital zoom range.
[DIGITAL ZOOM] is not available when the monitor is turned off.
MEM
OFF
ON
PIC
CAMERA
SET
ESP/5
Y
j
ISO
DIGITAL ZOOM
F2.8
F2.8
F2.8
F2.8
F2.8
1/1000
1/
1/
1/
1/10
10
10
1000
00
00
00
0.0
0.0
0.0
0.0
0.0
HQ
HQ
HQ
HQ
HQ
P
P
P
PP
2560
2560
2560
2560
2560
1920
1920
1920
1920
1920
5
5
5
555
The white area of the zoom indicator
indicates the optical zoom. If the
[DIGITAL ZOOM] is set to [ON], a red
area is displayed on the zoom
indicator. When you reach the limit of
the optical zoom, the digital zoom is
enabled.
F2.8
F2.8
F2.8
F2.8
F2.8
1/1000
1/
1/
1/
1/10
10
10
1000
00
00
00
0.0
0.0
0.0
0.0
0.0
HQ
HQ
HQ
HQ
HQ
P
P
P
PP
2560
2560
2560
2560
2560
1920
1920
1920
1920
1920
5
5
5
555
The cursor moves up and down the
zoom indicator according to the
zoom magnification.
The cursor turns orange when inside
the digital zoom area.
Optical zoom Digital zoom
41
3
Basic shooting functions
Taking close-up pictures (macro/
super macro)
Focusing is usually slow when you get close to a subject (wide-angle:
20 cm/7.9" to 50 cm/19.7"; telephoto: 60 cm/23.6" to 90 cm/35.4").
However, in macro mode focusing is performed quickly.
&This mode lets you shoot from as close as 20 cm/7.9" to your subject (when
the optical zoom is at the greatest wide-angle).
%This mode lets you shoot from as close as 2 cm/0.8" to your subject. In the
[%] mode, normal shooting is also possible, but the position of the zoom is
fixed automatically and cannot be adjusted.
1Press the & button.
The macro settings screen is displayed.
g“How to use the direct buttons
(P. 13)
2Select [& %] or [ ], and press Z.
3Take the picture.
Note
If you are close to a subject, the picture in the viewfinder is different from the
area that the camera actually records. For macro mode shooting, use the
monitor.
If you use the flash in macro shooting, shadows may be noticeable and the
correct exposure may not achieved.
During super macro shooting, the zoom and flash are not available.
&
%
&
OFF
For super close up
photography.
SELECT GO
OK
42
3
Basic shooting functions
Flash shooting
Select the flash mode best suited to the light conditions and the effect you
want to achieve.
Flash working range
W (max.): Approx. 0.2 m to 3.7 m (0.7 ft. to 12.1 ft.)
T (max.): Approx. 0.6 m to 2.1 m (2.0 ft. to 6.9 ft.)
Auto-flash (No indication)
The flash fires automatically in low light or backlight conditions.
Red-eye reduction flash (!)
The light from the flash may make the
subject’s eyes appear red in the picture.
The red-eye reduction flash mode
reduces this phenomenon by emitting
pre-flashes before firing the regular flash.
Fill-in flash (#)
The flash fires regardless of the available light.
This mode is useful for eliminating shadows on
the subject’s face (such as shadows from tree
leaves), in a backlight situation, or for
correcting the color shift produced by artificial
lighting (especially fluorescent light).
Flash off ($)
The flash does not fire even in low light conditions. Use this mode in situations where
flash photography is not desired or is prohibited. You can also use this mode when
shooting landscapes, sunsets, and other subjects outside the range of the flash.
Note
After the pre-flashes, it takes about 1 second before the shutter is released.
Hold the camera firmly, and prevent it from moving.
Effectiveness may be limited if the subject is not looking directly at the pre-
flashes, or if the shooting subject is too far. Individual physical characteristics
may also limit effectiveness.
Note
The fill-in flash may not have the desired effect under excessively bright light.
Note
Since a slow shutter speed is automatically selected in low light situations when in
the flash off mode, the use of a tripod is recommended to prevent your pictures from
being blurred by camera movement.
The subject’s eyes appear red.
Flash shooting
43
3
Basic shooting functions
1Press the # button.
The flash mode settings screen is displayed.
g“How to use the direct buttons” (P. 13)
2Select a flash mode, and press Z.
3Press the shutter button halfway.
In conditions where the flash will fire, #
lights (flash stand-by).
4Press the shutter button fully to
take the picture.
TIPS
The # (flash charge) mark blinks.
The flash is charging. Wait until # and the orange lamp beside the
viewfinder turn off.
Note
The flash does not fire in the following situations:
Sequential shooting, super macro, or panorama.
[AUTO] and [!] are not available in M mode.
The flash may not give you the optimum result in macro mode with the zoom
set to wide-angle (W). Check the resulting picture on the monitor.
SELECT GO
OK
The flash fires automatically
in low light.
FLASH MODE
AUTO
1/1000
F2.8
0.0
HQ
2560
1920
5
5
5
555
# mark
44
3
Basic shooting functions
Adjusting picture brightness (exposure
compensation)
This function allows you to make fine changes to the exposure setting. You
can adjust the exposure in the range of ±2.0 EV in 1/3 EV steps. When the
setting is changed, you can check the result on the monitor.
1Press bd to select a setting.
Plus [+] increases brightness and minus
[–] decreases brightness.
2Take the picture.
TIPS
Often bright subjects (such as snow) will turn out darker than their natural
colors. Adjust toward + to make these subjects closer to their real shades. For
the same reason, adjust toward – when taking dark subjects.
In some situations, you may get better results when the exposure that the
camera sets is compensated (adjusted) manually.
Note
If the flash is used, the image brightness (exposure) may differ from the
intended brightness.
Exposure compensation cannot correct the image if the surroundings of the
subject are extremely bright or dark.
F2.8
F2.8
F2.8
F2.8
F2.8
1/1000
1/
1/
1/
1/10
10
10
1000
00
00
00
+2.0
+2.0
+2.0
+2.0
+2.0
HQ
HQ
HQ
HQ
HQ
P
P
P
PP
2560
2560
2560
2560
2560
1920
1920
1920
1920
1920
5
5
5
555
Exposure value
45
4 Additional shooting functions
At a sporting event…
Use movie mode to capture the atmosphere
by recording the cheers and applause along
with the action. Or use sequential shooting
mode to take a succession of shots of a goal
and pick out the best ones later.
In the country or at a tourist spot…
Use panorama mode* to capture a beautiful
mountain range or impressive building.
At a party or family gathering…
Use the self-timer function to take group
photos at school reunions or birthday
parties.
When you want to add a special effect…
Add a sepia effect to produce an old-
fashioned touch, or a black & white effect to
produce a clear, sharp image while
checking the picture on the monitor.
4
Additional
shooting functions
* Requires Olympus xD-Picture Card sold separately.
46
4
Additional shooting functions
Setting the aperture and shutter speed
(manual shooting)
You can enjoy taking pictures at different aperture values and shutter speeds.
1Set the aperture and shutter
speed.
bd : Switches the aperture value
between 2 levels.
a: Sets a faster shutter speed.
c: Sets a slower shutter speed.
Aperture range:
Aperture value : F2.8 to F7.0
Shutter speed : 15" to 1/2000
Using ESP metering when taking pictures of subjects with strong backlighting
may cause the subject to be dark. Use spot metering to get pictures with an
accurate reading from the center without being affected by the light from behind.
ESP Meters the center of the monitor and the surrounding area separately.
The area in the center of the monitor may appear dark when there is
strong backlight.
nMeters only the center of the monitor to determine exposure. A subject
can be shot with optimal exposure regardless of the background light.
Top menu [MODE MENU] [CAMERA] [ESP/n]
g“How to use the menus” (P. 16)
1Select [ESP] or [n], and press
Z.
Note
To avoid camera movement, you are recommended to use a tripod when taking
pictures requiring a slow shutter speed.
0.0
0.0
0.0
0.0
0.0
2560 1920
2560 1920
2560 1920
2560 1920
2560 1920
HQ
HQ
HQ
HQ
HQ
M
M
M
MM
F4.9
F4.9
F4.9
F4.9
F4.9
5
5
5
555
1/100
1/
1/
1/
1/10
10
10
100
0
0
0
Exposure differential
Aperture value
Shutter speed
Selecting light measurement points
ESP
n
MEM
PIC
SET
CAMERA
ESP/5
Y
j
ISO
DIGITAL ZOOM
47
4
Additional shooting functions
Taking pictures in low light conditions
(ISO)
The higher the ISO value, the greater the camera’s light sensitivity and the
better its ability to shoot in low light conditions. However, higher values
also introduce electrical noise into the resulting picture, which may give it
a grainy appearance.
AUTO Sensitivity is automatically adjusted according to the light
conditions and the subject brightness.
50/100/200/400 With a lower ISO setting, you can shoot clear, sharp images in
daylight. With a higher ISO setting, you can shoot in dark places.
Top menu [MODE MENU] [CAMERA] [ISO]
g“How to use the menus” (P. 16)
1Select [AUTO], [50], [100], [200],
or [400], and press Z.
Note
[AUTO] is not available in M mode.
ISO settings are based on the sensitivity of normal camera film. The scale is
approximate.
When [ISO] is set to [AUTO] and you are shooting in dark conditions without a
flash, the shutter speed is reduced. In this case, the sensitivity is automatically
increased to avoid the risk of camera movement.
If the subject is too far away for the flash illumination to reach when
[ISO]
is set
to [AUTO], the sensitivity is automatically increased.
AUTO
50
100
200
400
PIC
MEM
SET
CAMERA
ESP/5
Y
j
ISO
DIGITAL ZOOM
48
4
Additional shooting functions
Adjusting picture coloration
The color of the subject differs depending on lighting conditions. For
instance, when daylight, the setting sun, or tungsten lighting are reflected
on white paper, the shade of white produced will be slightly different for
each. By setting the white balance, you can achieve more natural-looking
colors.
AUTO The white balance is adjusted automatically so that colors look natural
irrespective of the light source.
5For natural colors under a clear sky.
3For natural colors under a cloudy sky.
1For natural colors under tungsten lighting.
>For natural colors under fluorescent lighting.
VFor setting a more precise white balance than is available with other white
balance settings. To set the optimum white balance for the shooting
conditions, point the camera at a white object under the light source you
want to use and adjust the white balance.
g“One-touch white balance” (P. 49)
Top menu [MODE MENU] [PICTURE] [WB]
g“How to use the menus” (P. 16)
1Select a white balance setting,
and press Z.
TIPS
You can select a white balance setting other than the actual light source, and
enjoy the different color tones on the monitor.
WB
AUTO
SELECT GO
OK
Adjusting picture coloration
49
4
Additional shooting functions
Top menu [MODE MENU] [PICTURE] [WB] [V]
g“How to use the menus” (P. 16)
1
Display the [ONE TOUCH WB]
screen and point the camera at a
sheet of white paper.
Position the paper so that it fills the
screen, making sure there are no
shadows.
2Press Z.
The white balance is set and the screen returns to the mode menu.
One-touch white balance
Note
When setting the white balance by pointing the camera at a sheet of white
paper, the correct setting may not be obtained if the light reflected by the paper
is too bright or too dark.
White balance may not be effective under some special light sources.
After setting a white balance other than [AUTO], play back the picture and
check the colors on the monitor.
When the flash is fired with a white balance setting other than [AUTO], colors may
appear different in the resulting picture from the colors you see on the monitor.
When using situation-related modes, the white balance is automatically set
according to each mode.
ONE TOUCH WB
CANCEL
GO
OK
OK
CANCEL
GO
F2.8
1/1000
0.0
HQ
P
P
P
PP
2560
1920
5
5
5
555
One-touch white balance
50
4
Additional shooting functions
Recording movies
This function is for recording movies. These movies can be played back
on the camera. Sound can also be recorded.
1Decide the composition of the
picture.
The remaining recording time in the
internal memory or card is displayed on
the monitor.
You can use the zoom button to enlarge
your subject.
2Press the shutter button fully to
start recording.
The focus and zoom are locked during
recording.
The orange lamp beside the viewfinder
blinks while the movie is recorded in the
internal memory or card.
During movie recording, N lights red.
3Press the shutter button again to stop recording.
When the remaining recording time has been used up, recording stops
automatically.
When there is space in the internal memory or card, the remaining recording
time (P. 28) is displayed, and the camera is ready to shoot.
TIPS
To use the zoom during movie recording
Set [DIGITAL ZOOM] to [ON]. g“Using the digital zoom” (P. 40)
If you set [R] to [OFF], you can use the optical zoom during movie recording.
Note
The flash cannot be used.
Remaining recording time may become exhausted quickly during recording.
Try formatting the internal memory or card with your camera before continuing
recording. g“Formatting” (P. 79)
HQ
HQ
HQ
HQ
HQ
0.0
0.
0.
0.
0.0
0
0
0
0
0
0
000:
0
0
0
0:
:
:
:
15
15
15
15
15
00:15
Remaining
recording time
0
0
0
000:
0
0
0
0:
:
:
:
15
15
15
15
15
HQ
HQ
HQ
HQ
HQ
00:15
Recording movies
51
4
Additional shooting functions
Sound can be recorded while shooting a movie.
Top menu [R]g“How to use the menus” (P. 16)
1Select [ON], and press Z.
Recording sound with movies
Note
If the camera is more than 1 m (3.3 ft.) away from the source of the sound,
sound may not be recorded clearly by the built-in microphone.
The camera continues to record the movie until the shutter button is pressed
again or the space in the internal memory or card is exhausted.
A long recorded movie cannot be edited. (P. 69)
If a single movie recording uses up all of the space in the internal memory or
card, create space by erasing the movie or downloading it to a computer.
Notes for recording long movies
R
OFF
ON
SELECT GO
OK
52
4
Additional shooting functions
Sequential shooting
Takes still pictures in succession. The focus, exposure, and white balance
are locked at the first frame.
Approx. 5 frames at 1.2 frames/sec. (in HQ mode)
Top menu [MODE MENU] [CAMERA] [j]
g“How to use the menus” (P. 16)
1Select [ON], and press Z.
2Take the picture.
Press the shutter button fully and keep it
pressed. The camera will take pictures
in sequence until you release the button.
Note
The flash does not fire during sequential shooting.
Sequential shooting is not available when the record mode is set to SHQ.
If the battery power is low and the battery check blinks during sequential
shooting, shooting stops and the camera starts saving the picture you have
taken. Whether or not all of the shots are saved depends on how much battery
power remains.
OFF
ON
PIC
MEM
SET
CAMERA
ESP/5
Y
j
ISO
DIGITAL ZOOM
53
4
Additional shooting functions
Self-timer shooting
This function lets you take pictures using the self-timer. Fix the camera
securely on a tripod for self-timer shooting. This function is useful for taking
pictures when you want to be included in the photograph.
Top menu [Y g]“How to use the menus” (P. 16)
1Select [ON], and press Z.
2Press the shutter button fully to
take the picture.
Pressing the shutter button halfway
locks the focus and exposure.
The self-timer lamp lights for
approximately 10 seconds, then starts
blinking. After blinking for approximately
2 seconds, the picture is taken.
To stop shooting while in n mode,
press the shutter button fully again.
To cancel the self-timer, press Z.
The self-timer mode is automatically canceled after one shot.
Note
If sequential shooting is attempted in self-timer mode, the camera shoots 5
frames at most regardless of the setting.
Y
OFF
ON
A photo
is taken automatically
12 sec.
After shutter button is
pressed.
SELECT GO
OK
Self-timer lamp
54
4
Additional shooting functions
Function shooting (BLACK & WHITE/SEPIA/VIVID)
BLACK & WHITE For taking pictures in black and white.
SEPIA For taking pictures in sepia.
VIVID Enhances the vividness of colors.
Top menu [MODE MENU] [CAMERA] [FUNCTION]
g“How to use the menus” (P. 16)
1Select [BLACK & WHITE],
[SEPIA], or [VIVID], and press Z.
Note
White balance settings cannot be made in conjunction with [SEPIA] or [BLACK
& WHITE] settings.
R
FUNCTION
PANORAMA
2 IN 1
NOISE REDUCTION
PIC
MEM
SET
CAMERA
OFF
BLACK & WHITE
SEPIA
VIVID
55
4
Additional shooting functions
Panorama shooting
You can take advantage of panorama shooting with an Olympus xD-
Picture Card. Panorama shooting lets you connect pictures with
overlapping edges into a single panoramic picture, using the OLYMPUS
Master software.
Top menu [MODE MENU] [CAMERA] [PANORAMA]
g“How to use the menus” (P. 16)
1Use the arrow pad to choose at
which edge you want to connect
the pictures.
d: The next picture is connected at the
right edge.
b: The next picture is connected at the
left edge.
a: The next picture is connected at the
top.
c: The next picture is connected at the
bottom.
The part of the previous picture where it will be joined to the next picture does not
remain in the frame on the edge of the screen. You have to remember what the
part in the frame looked like and take the next picture so it overlaps. Compose your
shots so that the right edge of the previous picture overlaps with the left edge of
the next picture if you are connecting pictures from left to right (or vice versa if you
are connecting pictures from right to left).
Connects pictures from
left to right
Connects pictures from
bottom to top
Panorama shooting
56
4
Additional shooting functions
2Make sure that the edges of the pictures overlap, then take
the pictures.
The focus, exposure, and white balance are set by the first picture. Do not
select an extremely bright subject (such as the sun) for the first picture.
You cannot adjust the zoom after the first picture.
Panorama shooting is possible for up to 10 pictures.
When you have taken 10 pictures, a
warning mark g is displayed.
3Press Z to exit panorama shooting.
Note
Panorama mode can only be used when there is a card in the camera.
Moreover, panorama mode is only available with Olympus cards.
During panorama shooting, the flash and sequential shooting modes are not
available.
The camera itself cannot connect panorama pictures. The OLYMPUS Master
software is necessary to connect the pictures.
57
4
Additional shooting functions
Taking two-in-one pictures
This function allows you to combine two
pictures taken in succession and store
them as a single picture. This way you can
enjoy having two subjects in one.
Top menu [MODE MENU] [CAMERA] [2 IN 1]
g“How to use the menus” (P. 16)
1Take the first picture while
observing your subject on the
monitor.
The subject will be positioned on the left
in the combined picture.
2Take the second picture.
The subject will be positioned on the
right in the combined picture.
The [BUSY] bar is displayed during
editing. After the image is saved, the
camera returns to the mode menu.
Note
When using two-in-one pictures, panorama mode, the flash, and sequential
shooting mode are not available.
To cancel two-in-one picture mode after the first shot has been taken, press Z.
The first shot will not be saved.
Operating the mode dial will exit two-in-one picture mode.
If the camera enters sleep mode after the first picture has been taken, two-in-
one picture mode will be canceled.
Picture when played back
F2.8
1/1000
0.0
2560
1920
HQ
5
P
P
P
PP
1st
F2.8
1/1000
0.0
2560
1920
HQ
5
P
P
P
PP
2nd
Picture when shooting
58
4
Additional shooting functions
Recording sound with still pictures
Sound can be recorded when taking still pictures. Recording starts about
0.5 seconds after the shutter is released and lasts about 4 seconds.
When this function is enabled, sound is recorded automatically every time
you take a picture.
Top menu [MODE MENU] [CAMERA] [R]
g“How to use the menus” (P. 16)
1Select [ON], and press Z.
2When recording starts, aim the
camera microphone at the
source of the sound you want to
record.
TIPS
H appears when still pictures and movies with sound are played back.
During playback, sound is output from the speaker. The volume can be
adjusted. g“Setting the playback volume (VOLUME)” (P. 87)
Sound can be added later to still pictures. Recorded sound can also be re-
recorded. g“Adding sound to still pictures” (P. 68)
Note
If the microphone is farther than 1 m (3.3 ft.) from the subject, sound may not
be recorded properly.
Pictures cannot be taken during sound recording.
Sound recording is not possible in the following cases:
Sequential shooting, panorama, or two-in-one pictures.
Sound recording may also pick up camera noises, such as button operations,
shutter movement, etc.
Sound recording may not be possible if there is insufficient space in the internal
memory or card.
PIC
MEM
SET
CAMERA
ON
R
FUNCTION
PANORAMA
2 IN 1
OFF
NOISE REDUCTION
Microphone
59
4
Additional shooting functions
Noise reduction
When shooting in dark places, shutter speeds become slower as there is
less light focused on the CCD. During long exposures, signals are
generated by parts of the CCD where no light is focused and are recorded
on the image as noise. When [NOISE REDUCTION] is set to [ON], the
camera automatically reduces the noise to produce clearer images.
The purpose of these pictures is to illustrate the effects of noise reduction. They are
not actual pictures.
Top menu [MODE MENU] [CAMERA] [NOISE REDUCTION]
g“How to use the menus” (P. 16)
1Select [ON] or [OFF], and press Z.
ON OFF
Noise is reduced. Shooting time is twice
as long as usual. Noise reduction is
enabled when the shutter speed is
slow.
Noise is not reduced. Noise may be
conspicuous with slow shutter speeds.
Note
[NOISE REDUCTION] is always set to [ON] when the camera is set to z or
f ( * & ( , , , or )).
When [NOISE REDUCTION] is set to [ON], the camera implements noise-
reducing processes after each shot to produce clearer images. However,
shooting time is approximately twice as long as usual. During this time, the next
shot cannot be taken. Also, the picture is larger than normal. Use the monitor
to view what you are taking.
When [NOISE REDUCTION] is set to [ON], sequential shooting and two-in-one
pictures are not possible.
This function may not work effectively with some shooting conditions or
subjects.
60
With film-type cameras, you cannot see the
pictures you have taken until the film has
been developed. And aren’t you sometimes
disappointed with the results when you do
eventually see them? Pictures of blurred
scenery or someone with their eyes shut. Or
maybe you took several pictures of the
same scene because you weren’t sure
whether they would come out or not. That’s
no way to record important memories!
With a digital camera, you can review your
pictures immediately.
Just play the picture back as soon as you’ve
taken it. If you don’t like what you see, erase
and take it again. So don’t be afraid of
pictures not coming out well – just keep on
pressing that shutter button!
5
Playback
OK!
SAVE!
NO!
61
5
Playback
Playing back still pictures
When a card is in the camera, a picture from the card is displayed. To play
back pictures from the internal memory, remove the card.
1Press $.
The green lamp on the camera lights.
The last picture taken is displayed on the monitor (single-frame playback).
Use the arrow pad to navigate between pictures.
2Press T or W on the zoom button.
This allows you to enlarge the picture (close-up playback) or display an
index of pictures (index display).
4.0
4.0
4.0
4.0
4.0
1
1
1
11
4
4
4
44
7
7
7
77
2
2
2
22
5
5
5
55
8
8
8
88
3
3
3
33
6
6
6
66
9
9
9
99
HQ
HQ
HQ
HQ
HQ
’05
05
05
05
05
.
.
.
..
04
04
04
04
04
.
.
.
..
30 12
30 12
30 12
30 12
30 12
:
:
:
::
30
30
30
30
30
9
9
9
99
100
100
100
100
100
-
-
-
--
0009
0009
0009
0009
0009
Close-up playback
Press T to enlarge the
picture up to a maximum
of 5×.
By using the arrow pad
during close-up playback,
you can scroll to different
portions of the picture.
Pictures cannot be stored
in an enlarged state.
Close-up playback is not
available for movies.
Index display
During index display, use the
arrow pad to select the desired
picture.
You can select the number of
pictures to be displayed.
g“Selecting the number of
pictures” (P. 62)
Press T to return to
single-frame display
Press W to return to
single-frame display
W TT W
Playing back still pictures
62
5
Playback
This function lets you select the number of pictures in an index display from 4, 9, and
16.
Top menu [MODE MENU] [SETUP] [G]
g“How to use the menus” (P. 16)
1Select [4], [9], or [16], and press Z.
Pictures taken with the camera held vertically are displayed horizontally. This
function lets you rotate such pictures 90° clockwise or counterclockwise so that they
are displayed correctly.
1
Press the
y
button.
Each press rotates the image in the following sequence:
90° counterclockwise, 90° clockwise, and back to the original.
g“How to use the direct buttons” (P. 13)
Selecting the number of pictures
Picture rotation
G
EDIT
PLAY
MEM
SETUP
4
9
16
m
SETUP
100
100
100
100
100
-
-
-
--
0005
0005
0005
0005
0005
HQ
HQ
HQ
HQ
HQ
’05
05
05
05
05
.
.
.
..
04
04
04
04
04
.
.
.
..
30 15
30 15
30 15
30 15
30 15
:
:
:
::
30
30
30
30
30
5
5
5
55
100
100
100
100
100
-
-
-
--
0005
0005
0005
0005
0005
HQ
HQ
HQ
HQ
HQ
’05
05
05
05
05
.
.
.
..
04
04
04
04
04
.
.
.
..
30 15
30 15
30 15
30 15
30 15
:
:
:
::
30
30
30
30
30
5
5
5
55
’05
05
05
05
05
.
.
.
..
04
04
04
04
04
.
.
.
..
30 15
30 15
30 15
30 15
30 15
:
:
:
::
30
30
30
30
30
5
5
5
55
100
100
100
100
100
-
-
-
--
0005
0005
0005
0005
0005
HQ
HQ
HQ
HQ
HQ
Playing back still pictures
63
5
Playback
This function displays still pictures stored in the internal memory or card one after
another. Only the first frame of each movie is displayed.
Select a still picture and display the top menu.
Top menu [m] g“How to use the menus” (P. 16)
The slideshow starts.
Press Z to stop the slideshow. The slideshow will not stop until you cancel it by
pressing Z.
Note
The following pictures cannot be rotated.
Movies, protected pictures, pictures that have been edited on a computer,
and pictures taken with another camera.
New picture orientations are saved even if the power is turned off.
Slideshow
Note
You are recommended to use the optional AC adapter when running a
slideshow for a long period of time. When using batteries, the camera will enter
sleep mode after about 30 minutes and stop the slideshow automatically.
Playing back still pictures
64
5
Playback
(To set the slideshow format
You can choose how the pictures go from one to the next during the slideshow.
NORMAL Displays the pictures stored in the internal memory or card one at a time.
SLIDE Displays the pictures by sliding the next picture over the previous picture
from right to left.
FADER Displays the pictures by gradually fading out the previous picture and
fading in the next picture.
ZOOM Displays the pictures by gradually enlarging the next picture from the
center of the screen.
Top menu [MODE MENU] [SETUP] [m SETUP]
g“How to use the menus” (P. 16)
1
Select [NORMAL], [SLIDE],
[FADER] or [ZOOM], and press
Z
.
MEM
SETUP
NORMAL
SLIDE
FADER
ZOOM
EDIT
PLAY
G
m
SETUP
65
5
Playback
Playing back movies
This function lets you play back movies. You can fast forward the movie or
play it back one frame at a time.
Select a picture with n and display the top menu.
Top menu [MOVIE PLAY] g“How to use the menus” (P. 16)
The movie is played back. When playback
ends, the camera automatically returns to the
beginning of the movie and displays the
[MOVIE PLAY] menu.
To play the movie again, select [RESTART].
To return to playback mode, select [EXIT].
(
Operations during movie playback
H is displayed on movies that have sound
recorded. Pressing ac lets you adjust the
sound volume during playback.
a : Increases the volume.
c : Reduces the volume.
d : Each time you press the button, the
playback speed changes in the following
order: 2×; 20×; and back to 1×.
b : Plays the movie in reverse. Each time you
press the button, the playback speed
changes in the following order: 2×; 20×;
and back to 1×.
Z : Pauses the movie and lets you play it back
frame by frame.
(Frame by frame playback
a : Jumps to the frame 10 frames back. If the
movie is less than 10 frames long, displays
the first frame.
c : Jumps to the frame 10 frames ahead. If the
movie is less than 10 frames long, displays
the last frame.
d :
Displays the next frame. The movie can be
played continuously by holding the button down.
b : Displays the previous frame. The movie
can be played continuously in reverse by
holding the button down.
Z : Displays the [MOVIE PLAY] menu.
Note
The orange lamp beside the viewfinder blinks while the camera is reading the
movie from the internal memory or card. This may take some time. Do not open
the card cover while the orange lamp is blinking. Doing so may damage the
image data, or render the internal memory or card unusable.
MOVIE PLAY
RESTART
EXIT
SELECT
GO
OK
SELECT GO
OK
00:12/00:15
00:12/00:15
00:12/00:15
00:12/00:15
00:12/00:15
7
7
7
77
/
/
/
//
7
6
7/
n
n
n
nnH
H
H
HHnH
Playing time/
total recording time
00:00/00:15
00:00/00:15
00:00/00:15
00:00/00:15
00:00/00:15
/
/
/
///
n
n
n
nnn
/
/
/
///
66
5
Playback
Editing still pictures (ADD FRAME/BLACK & WHITE/SEPIA/Resizing)
Editing still pictures (ADD FRAME/
BLACK & WHITE/SEPIA/ )
This function lets you edit still pictures and save them as new pictures. The
following editing operations are possible.
ADD FRAME This function lets you frame pictures with a frame of your choice
and saves them as new pictures.
BLACK & WHITE This function lets you save black & white versions of your
pictures.
SEPIA This function lets you save sepia versions of your pictures.
Q Changes the image size to 640 × 480 or 320 × 240 and saves
the picture as a new file.
Select the picture that you want to edit and display the top menu.
Top menu [MODE MENU] [EDIT] g“How to use the menus” (P. 16)
1Select [ADD FRAME], [BLACK &
WHITE], [SEPIA], or [Q], and
press d.
2 When [BLACK & WHITE] or
[SEPIA] is selected
Select [BLACK & WHITE] or [SEPIA], and
press Z.
When is selected
Select an image size, and press Z.
MEM
PLAY
SET
ADD FRAME
BLACK & WHITE
SEPIA
Q
EDIT
BLACK & WHITE
BLACK & WHITE
CANCEL
SELECT
SELECT
SELECT
SELECT
SELECT
GO
GO
GO
GO
GO
OK
O
O
O
OK
K
K
K
SELECT GO
OK
When [BLACK & WHITE] is
selected
Q
640 480
320 240
CANCEL
SELECT
SELECT
SELECT
SELECT
SELECT
GO
GO
GO
GO
GO
OK
O
O
O
OK
K
K
K
SELECT GO
OK
[ ]Q
Editing still pictures (ADD FRAME/BLACK & WHITE/SEPIA/Q)
67
5
Playback
When [ADD FRAME] is
selected
cSelect a frame, and press Z.
The frame is added to the picture, and
the result is displayed.
dAdjust the picture size and position.
acbd Adjusts picture
position.
Zoom button Adjusts picture size.
ePress Z.
fSelect [NEW FILE], and press Z.
The [BUSY] bar is displayed, and after the picture is saved, the camera
returns to the playback mode.
Note
[BLACK & WHITE], [SEPIA], [Q], and [ADD FRAME] are not available in the
following cases:
Movies, pictures that have been edited on a computer, pictures taken with
another camera, or when there is insufficient space in the internal memory
or card.
When a frame is added, the picture is saved at an image size of 1,584 × 1,056.
Adding a frame to a picture taken in SQ2 causes the picture to appear grainy.
OK
OK
ADD FRAME
GO
MOVE
GO
MOVE
Editing still pictures (ADD FRAME/BLACK & WHITE/SEPIA/Q)
68
5
Playback
Sound can be added to a still picture that you have already taken. (This is known as
“after-recording”.) You can also re-record over the sound that has already been
recorded. Total recording time per picture is approximately 4 seconds.
Select the still picture to which you want to add sound, and display the top menu.
Top menu [MODE MENU] [PLAY] [R]
g“How to use the menus” (P. 16)
1Press d to display [START].
2Aim the camera microphone
toward the sound you want to
record, and press Z to start
recording.
The [BUSY] bar is displayed during
recording.
Adding sound to still pictures
Note
If the microphone is farther than 1 m (3.3 ft.) from the subject, sound may not
be recorded properly.
If you re-record the sound, the original sound is erased.
You cannot record sound when there is insufficient space in the internal
memory or card.
The microphone may pick up the sound of buttons operated.
Once sound is added to a picture, it is not possible to erase only the sound. In
this case, make a re-recording with silence.
EDITMEM
SET
PLAY
START
<
R
Microphone
69
5
Playback
Editing movies
This function lets you create indexes and edit movies.
INDEX 9 frames extracted from a movie are displayed as an index and stored
as a still picture.
g“Creating an index” (P. 69)
EDIT This function lets you extract parts of the movie that you want.
g“Editing a movie” (P. 70)
Select a picture with n and display the top menu.
Top menu [MODE MENU] [EDIT] [INDEX]
g“How to use the menus” (P. 16)
When there is insufficient space in the internal memory or card, a warning screen
is displayed before returning to the [EDIT] screen.
1
Select the first frame of the index,
and press
Z
.
a : Jumps to the first frame of the
movie.
c : Jumps to the last frame of the
movie.
d : Displays the next frame. The movie
can be played continuously by
holding the button down.
b : Displays the previous frame. The movie can be played continuously in
reverse by holding the button down.
2As in Step 1, select the last frame
of the index, and press Z.
Creating an index
00:00
/
/
/
//00:15
OK
GO
OK
GO
00:00/00:15
OK
GO
OK
GO
00:15
/
/
/
//00:15
00:15/00:15
Editing movies
70
5
Playback
3Select [OK], and press Z.
The [BUSY] bar is displayed and the
camera returns to the playback mode. The
index is stored as a new picture.
To select different frames, select [RESET],
and press Z. Repeat the procedure from
Step 1.
To quit the editing function, select
[CANCEL] and press Z.
Top menu [MODE MENU] [EDIT] [EDIT]
g“How to use the menus” (P. 16)
TIPS
The index is stored as a 1,024 × 768 still picture which is in a different record
mode from the original movie.
Note
The interval between the frames that are automatically extracted varies
depending on the length of the movie.
An index consists of 9 frames.
You cannot create an index if there is insufficient space in the internal memory
or card.
Editing a movie
INDEX
OK
RESET
CANCEL
SELECT
SELECT
SELECT
SELECT
SELECT
GO
GO
GO
GO
GO
OK
O
O
O
OK
K
K
K
SELECT GO
OK
Editing movies
71
5
Playback
1Select the first frame of the part
you want to keep, and press Z.
a :
Jumps to the first frame of the movie.
c :
Jumps to the last frame of the movie.
d : Displays the next frame. The movie
can be played continuously by
holding the button down.
b : Displays the previous frame. The movie can be played continuously in
reverse by holding the button down.
2As in Step 1, select the last frame
of the part you want to keep, and
press Z.
3Select [OK], and press Z.
To select different frames, select
[RESET], and press Z. Repeat the
procedure from Step 1.
To quit the editing function, select
[CANCEL], and press Z.
4Select [NEW FILE] or
[OVERWRITE], and press Z.
NEW FILE Stores the edited movie as
a new movie.
OVERWRITE Stores the edited movie with
the same name as the
original. The original movie
is not stored.
The [BUSY] bar is displayed. After the edited movie is stored as a new
movie or the original movie is overwritten, the camera returns to the
playback mode.
Note
You cannot select [NEW FILE] if there is insufficient space in the internal
memory or card.
The editing process of long movies is more time-consuming.
00:00
/
/
/
//00:15
OK
GO
OK
GO
00:00/00:15
00:15
/
/
/
//00:15
OK
GO
OK
GO
00:15/00:15
EDIT
OK
RESET
CANCEL
SELECT
GO
OK
SELECT GO
OK
EDIT
NEW FILE
OVERWRITE
SELECT
GO
OK
CANCEL
SELECT
GO
OK
CANCEL
72
5
Playback
Playing back pictures on a TV
Use the AV cable provided with the camera to play back recorded images
on your TV. You can play back both still pictures and movies on your TV.
1Make sure that the TV and camera are turned off. Connect
the multi-connector on the camera to the video input
terminal on the TV using the AV cable provided with the
camera.
2Turn the TV on, and set it to the video input mode.
For details of switching to video input, refer to your TV’s instruction manual.
3Press $ to turn the camera on.
The last picture taken is displayed on the TV. Use the arrow pad to select
the picture you want to display.
TIPS
You are recommended to use the optional AC adapter when playing back
pictures on a TV.
The close-up playback, index display and [m] functions can also be used on
a TV screen.
Note
Make sure that the camera’s video output signal is the same as the TV’s video
signal. g“Selecting the video output” (P. 73)
The camera’s monitor turns off automatically when the AV cable is connected
to the camera.
Be sure to use the AV cable provided to connect the camera to the TV.
The picture may appear off-center on the TV screen.
Connect to the TV’s
video input (yellow)
and audio input (white)
terminals.
AV cable (provided)
Connector cover Multi-connector
Playing back pictures on a TV
73
5
Playback
You can select [NTSC] or [PAL] according to your TV’s video signal type. Use this
setting when playing back pictures on a TV in a foreign country. Select the [VIDEO
OUT] signal before connecting the AV cable. If you select the wrong video signal
type, you will not be able to play back the recorded pictures properly on the TV.
Top menu [MODE MENU] [SETUP] [VIDEO OUT]
g“How to use the menus” (P. 16)
In : Top menu [SETUP] [VIDEO OUT]
1Select [NTSC] or [PAL], and
press Z.
Selecting the video output
TIPS
TV video signal types & main regions
Check the video signal type before connecting the camera to the TV.
NTSC North America, Taiwan, Korea
PAL European countries, China
The factory default setting varies depending on the region where you
purchased the camera.
X
VIDEO OUT
PIC
CAMMEM
SETUP
NTSC
PAL
74
5
Playback
Displaying detailed shooting
information
This function lets you display detailed shooting information on the monitor
for approx. 3 seconds in the playback mode. For details of the information
displayed, see “Monitor indications” (P. 150).
Top menu [INFO] g“How to use the menus” (P. 16)
Each time you select [INFO] from the top menu, the information display is
alternately turned on and off.
When [INFO] is on When [INFO] is off
Note
If the picture has been taken with a different camera, only the date and time,
frame number, and battery check indication are displayed when [INFO] is set
on.
’05
05
05
05
05
.
.
.
.
.
04
04
04
04
04
.
.
.
..
30 15
30 15
30 15
30 15
30 15
:
:
:
::
30
30
30
30
30
100
100
100
100
100
-
-
-
--
0005
0005
0005
0005
0005
HQ
HQ
HQ
HQ
HQ
10
10
10
10
10
5
5
5
55
1/100
1/
1/
1/
1/10
10
10
100
0
0
0
F
F
F
FF
2.8
2.
2.
2.
2.8
8
8
8
+2.0
+2
+2
+2
+2.0
.0
.0
.0
ISO
ISO
ISO
ISO
ISO
400
400
400
400
400
2560
2560
2560
2560
2560
1920
1920
1920
1920
1920
SIZE
SIZE
SIZE
SIZE
SIZE
:
:
:
:
:
5
5
5
55
100
100
100
100
100
-
-
-
--
0005
0005
0005
0005
0005
HQ
HQ
HQ
HQ
HQ
10
10
10
10
10
’05
05
05
05
05
.
.
.
..
04
04
04
04
04
.
.
.
..
30 15
30 15
30 15
30 15
30 15
:
:
:
::
30
30
30
30
30
5
5
5
55
75
5
Playback
Protecting pictures
You are recommended to protect important pictures to avoid accidentally
erasing them. Protected pictures cannot be erased by the single-frame/all-
frame erase function, but they are all erased by formatting.
Select the picture that you want to protect, and display the top menu.
Top menu [0 g] “How to use the menus” (P. 16)
Each time you select [0] from the top
menu, the protection is alternately turned
on and off.
Displayed when a
picture is protected.
76
5
Playback
Copying pictures to a card (BACKUP)
You can copy (backup) all the image data stored in the internal memory to
the card. The image data in the internal memory is not erased by copying
it to the card.
The optional card is required to use the backup function. Operate the
camera with the card inserted.
Top menu [MODE MENU] [CARD] [BACKUP]
g“How to use the menus” (P. 16)
In : Top menu [SETUP] [BACKUP]
1Select [YES], and press Z.
All image data stored in the internal
memory is copied to the card.
Note
When the card has insufficient memory, [CARD FULL] is displayed, and
copying is canceled.
When the f mark is blinking, pictures cannot be backed up because of
insufficient battery power.
If the battery power is exhausted while copying, the image data may be lost or
damaged. You are recommended to use the AC adapter.
Never open the card cover, remove the batteries, or connect or disconnect the
AC adapter during copying as this may cause malfunction of the internal
memory or the card.
BACKUP
YES
NO
SELECT GO
OK
77
5
Playback
Erasing pictures
This function erases recorded pictures. Pictures can be erased either one
at a time or all the pictures in the internal memory or card at once.
When you want to erase pictures in the internal memory, do not insert
the card.
Insert the card when you want to erase pictures on the card.
1Select the picture you want to
erase, and press the S button.
The [S ERASE] screen is displayed.
g
“How to use the direct buttons” (P. 13)
,
“Playing back still pictures” (P. 61)
2Select [YES], and press Z.
The picture is erased, and the menu is exited.
Note
You cannot erase protected pictures. Cancel protection before erasing such
pictures.
Once erased, pictures cannot be restored. Check each picture before erasing
to avoid accidentally erasing pictures you want to keep. g“Protecting
pictures” (P. 75)
Single-frame erase
ERASE
SELECT
GO
OK
SELECT GO
OK
YES
NO
Erasing pictures
78
5
Playback
This function erases all the pictures in the internal memory or card.
Top menu [MODE MENU] [MEMORY(CARD)] [ALL ERASE]
g“How to use the menus” (P. 16)
1Select [YES], and press Z.
All the pictures are erased.
All-frame erase
NO
YES
SELECT GO
OK
ALL ERASE
CAUTION ERASING ALL
79
5
Playback
Formatting
This function lets you format the internal memory or card. Formatting
prepares cards to receive data.
To format the internal memory, do not insert the card.
To format the card, have it inserted.
Before using non-OLYMPUS cards or cards which have been formatted on a
computer, you must format them with this camera.
All existing data, including protected pictures, are erased when the
card is formatted. Make sure that you save or transfer important data
to a computer before formatting the card.
Top menu [MODE MENU] [MEMORY(CARD)]
[MEMORY FORMAT (FORMAT)] g“How to use the menus” (P. 16)
In : Top menu [SETUP] [MEMORY FORMAT (FORMAT)]
1Select [YES], and press Z.
The [BUSY] bar is displayed while the
card is formatted.
Note
Do not do any of the following during formatting as such actions may damage
the card.
Open the card cover or battery compartment cover, or connect or
disconnect the AC adapter (regardless of whether there are batteries in
the camera or not).
SELECT GO
OK
<
MEMORY FORMAT
NO
YES
CAUTION ERASING ALL
80
One of the key features of a digital camera
is that you can view the pictures you have
taken immediately.
But that isn’t all.
For example, you can set the startup screen
so that one of the pictures you have taken is
displayed when you turn the camera on.
That’s originality for you!
And if you lend the camera to friends from
abroad, you can select the appropriate
language for on-screen display.
Making use of these functions will make
such a difference to how much fun you get
out of your camera. Why not try them out?
6
Settings
Which language?
Set a setup screen?
Use the beep sound?
Date / Time settings
Use button operation beep?
What monitor brightness?
PW ON setup
Use shutter sound?
GOAL
START
Now you have your very own customized camera!
81
6
Settings
Saving camera settings (ALL RESET)
This function lets you choose whether or not to save the current camera
settings after the power is turned off. The settings affected by [ALL
RESET] are listed below.
The [ALL RESET] setting ([ON]/[OFF]) applies to all modes. It applies
whether the camera is in shooting mode or playback mode.
ON All settings are returned to the factory default settings after the power is
turned off (initial settings).
Example: If [ALL RESET] is set to [ON] and [K] is changed to [SQ1],
[K] returns to the factory default setting ([HQ]) when the
camera is turned on again.
OFF The settings made before the power is turned off are saved.
Top menu [MODE MENU] [SETUP] [ALL RESET]
g“How to use the menus” (P. 16)
In : Top menu [SETUP] [ALL RESET]
1Select [OFF] or [ON], and press Z.
(Functions that return to default settings when [ALL
RESET] is set [ON].
This sets whether the monitor turns on or not when the camera is turned on in
shooting mode.
Note
The settings in the [SETUP] tab in the [MODE MENU] ([ALL RESET], [W],
[8], etc.) are saved even when [ALL RESET] is set to [ON].
Function
Factory
default setting
Ref.
page Function
Factory
default setting
Ref.
page
Exposure
compensation
0.0 P. 44 DIGITAL
ZOOM
OFF P. 40
FLASH MODE AUTO P. 42 R (still pictures) OFF P. 58
MonitorON
(Lights) P. 24 R (movies) ON P. 51
ESP/n ESP P. 46 FUNCTION OFF P. 54
& OFF P. 41
NOISE REDUCTION
OFF P. 59
j KOFF P. 52 HQ P. 27
ISO AUTO(M: 50) P. 47 WB AUTO P. 48
SCENE SELECT
o P. 37 INFO OFF P. 74
82
6
Settings
Changing the display language
You can select a language for on-screen display. Available languages vary
depending on the area where you purchased this camera.
Top menu [MODE MENU] [SETUP] [W]
g“How to use the menus” (P. 16)
In : Top menu [SETUP] [W]
1Select a language, and press Z.
TIPS
To increase the number of languages
You can add other languages to your camera with the provided OLYMPUS
Master software. For details, refer to the “Help” guide in the OLYMPUS
Master software.
FRANCAIS
ENGLISH
ESPAÑOL
PORTUGUES
SELECT GO
OK
83
6
Settings
Selecting a power on screen (PW ON
SETUP)
You can set a screen or sound that is played back when the camera is
turned on. You can also register your favorite picture and display it on the
screen. g“Registering a power on screen (SCREEN SETUP)” (P. 84)
Top menu [MODE MENU] [SETUP] [PW ON SETUP]
g“How to use the menus” (P. 16)
In : Top menu [SETUP] [PW ON SETUP]
1From [SCREEN], select [OFF], [1]
or [2], and press b.
OFF No picture is displayed.
1 A picture is displayed.
2 The registered picture is displayed.
If there is no registered picture,
nothing is displayed.
2From [SOUND], select [OFF], [1]
or [2], and press b.
OFF No startup sound is output.
1 / 2 Startup sound is output.
The volume level is the same as that set
for the playback volume.
g“Setting the playback volume
(VOLUME)” (P. 87)
3Press Z.
PW ON SETUP
SCREEN
SOUND
OFF
1
2
SELECT
GO
OK
OFF
1
2
SELECT
GO
OK
PW ON SETUP
SCREEN
SOUND
Selecting a power on screen (PW ON SETUP)
84
6
Settings
You can register your favorite picture for display when the power is turned on.
Register a picture saved in the internal memory or card. To display the registered
picture, make the settings in [PW ON SETUP]. g“Selecting a power on screen
(PW ON SETUP)” (P. 83)
Top menu [MODE MENU] [SETUP] [SCREEN SETUP]
g“How to use the menus” (P. 16)
If a picture is already registered, the [IMAGE
EXISTING] screen is displayed asking if you
want to cancel the currently registered picture
and register a new one. To register a new
picture, select [RESET], and press Z. If you
select [KEEP], the screen returns to the menu.
1Select the picture you want to register, and press Z.
2Select [OK], and press Z.
The picture is registered, and the screen
returns to the menu.
Registering a power on screen (SCREEN SETUP)
Note
You cannot register a picture or movie frame that cannot be played back on this
camera.
SCREEN SETUP
RESET
KEEP
IMAGE EXISTING
SELECT GO
OK
SCREEN SETUP
OK
CANCEL
SET AS PW ON SCREEN
SELECT GO
OK
85
6
Settings
Viewing pictures immediately (REC VIEW)
You can choose whether or not to display the picture you have just taken
on the monitor.
ON This displays the picture while it is being recorded. This is useful for making
a brief check of the picture you have just taken. During rec view, the camera
is ready to shoot.
OFF The picture being recorded to the card is not displayed. This is useful when
you want to prepare for your next shot while the previous picture is being
recorded.
Top menu [MODE MENU] [SETUP] [REC VIEW]
g“How to use the menus” (P. 16)
1Select [OFF] or [ON], and press Z.
You can adjust the volume of the beep sound used for warnings. Choose
from [LOW] or [HIGH]. You can turn the sound off completely by setting
[OFF].
Top menu [MODE MENU] [SETUP] [8]
g“How to use the menus” (P. 16)
1Select [OFF], [LOW], or [HIGH],
and press Z.
OFF
ON
ALL RESET
PW ON SETUP
REC VIEW
8
PIC
CAMMEM
SETUP
Setting warning sounds
OFF
LOW
HIGH
PIC
CAMMEM
SETUP
ALL RESET
PW ON SETUP
REC VIEW
8
86
6
Settings
Setting operation sounds (BEEP)
You can choose from 2 different sounds for button operations. You can
also set the volume of the sound to [LOW] or [HIGH]. You can turn the
sound off completely by setting [OFF].
Top menu [MODE MENU] [SETUP] [BEEP]
g“How to use the menus” (P. 16)
1Select [OFF], [1] or [2]. If you
selected [1] or [2], select [LOW]
or [HIGH], and press Z.
You can choose from 2 different sounds for the shutter button. You can
also set the volume of the sound to [LOW] or [HIGH]. You can turn the
sound off completely by setting [OFF].
Top menu [MODE MENU] [SETUP] [SHUTTER SOUND]
g“How to use the menus” (P. 16)
1Select [OFF], [1] or [2]. If you
selected [1] or [2], select [LOW]
or [HIGH], and press Z.
BEEP
OFF
1
LOW
HIGH
2
SELECT
GO
OK
Setting the shutter sound (SHUTTER SOUND)
SHUTTER SOUND
SELECT
GO
OK
OFF
1
LOW
HIGH
2
87
6
Settings
Setting the playback volume (VOLUME)
You can adjust the sound volume of still pictures and movies as well as the
volume of the sound generated when the power is turned on. There are 5
levels to choose from.
Top menu [MODE MENU] [SETUP] [VOLUME]
g“How to use the menus” (P. 16)
1Press ac to set the volume,
and press Z.
BEEP
VOLUME
s
X
VIDEO OUT
EDIT
PLAY
MEM
SETUP
7
6
Selecting this level will
mute the sound completely.
88
6
Settings
Resetting the file name (FILE NAME)
The camera automatically creates file names and folder names for images
to be stored in. Files can be numbered from 0001 to 9999 and folders can
be numbered from 100 to 999. Examples are shown below.
There are two settings from which you can choose: [RESET] or [AUTO]. Choose the
one that is best for you when transferring images to a computer.
RESET The file number and folder number are reset every time a new card is
inserted in the camera. The folder number returns to No. 100 and the file
number returns to No. 0001. This method is useful when grouping files
on separate cards.
AUTO Even if a new card is inserted, the folder number and file number are
retained from the previous card, so the same file number is not used on
different cards. This helps you to manage multiple cards. This method is
useful when you want to manage all your files with sequential numbers.
Top menu [MODE MENU] [SETUP] [FILE NAME]
g“How to use the menus” (P. 16)
1Select [RESET] or [AUTO], and
press Z.
Note
When the File No. reaches 9999, the File No. returns to 0001 and the Folder
No. changes.
When both the Folder and File No. reach their respective maximum number
(999/9999), the number of storable pictures becomes 0 even if the card is not
full. No more pictures can be taken. Replace the card with a new one.
\ D C I M \ * * * O L Y M P \ P m d d * * * * . j p g
Folder No.
(100 – 999)
File nameFolder name
Month (1 – C)
Day (01 – 31)
File No.
(0001 – 9999)
Month: Jan. – Sep. = 1 – 9, Oct. = A, Nov. = B, Dec. = C
SHUTTER SOUND
VOLUME
FILE NAME
s
PIXEL MAPPING
PIC
CAM
MEM
SETUP
RESET
AUTO
89
6
Settings
Checking the image processing function
(PIXEL MAPPING)
The pixel mapping feature allows the camera to check and adjust the CCD and
image processing functions. It is not necessary to operate this function frequently.
Approximately once a year is recommended. Wait at least one minute after taking
or viewing pictures to allow for proper performance of the pixel mapping function.
Top menu [MODE MENU] [SETUP] [PIXEL MAPPING]
g“How to use the menus” (P. 16)
1When [START] is displayed,
press Z.
The [BUSY] bar is displayed during
pixel mapping. When pixel mapping is
finished, the screen returns to the
mode menu.
This function lets you adjust the brightness of the monitor to make it easier
to see the image.
Top menu [MODE MENU] [SETUP] [s]
g“How to use the menus” (P. 16)
In : Top menu [SETUP] [s]
1Adjust the brightness while
looking in the monitor, and when
you have set the desired level,
press Z.
Pressing a brightens the monitor, and
pressing c darkens it.
Note
If you turn the camera off during pixel mapping, start again from Step 1.
START
PIC
CAM
MEM
SETUP
SHUTTER SOUND
VOLUME
FILE NAME
s
PIXEL MAPPING
Adjusting the brightness of the monitor
s
SELECT
GO
OK
SELECT GO
OK
90
6
Settings
Setting the date and time
This function lets you set the date and time. The date and time is saved
with each picture, and is used in the file name.
Top menu [MODE MENU] [SETUP] [X]
g“How to use the menus” (P. 16)
In : Top menu [SETUP] [X]
1
Press
ac
to select one of the
following date formats: [Y-M-D]
(Year/Month/Day), [M-D-Y]
(Month/Day/Year), [D-M-Y] (Day/
Month/Year), and press
d
.
Move to the year setting.
The following steps show the procedure
used when the date and time settings
are set to [Y-M-D].
2Press ac to set the year, and
press d to move to the month
setting.
To move back to the previous setting,
press b.
The first two digits of the year are fixed.
3Repeat this procedure until the
date and time are completely set.
The time is displayed in the 24-hour format.
Consequently, 2 p.m. is displayed as 14:00.
4Press Z.
For a more accurate setting, press when the time signal hits 00 seconds.Z
Note
The date and time settings return to the factory default settings if the camera is
left without batteries for approximately 3 days. The settings will be canceled
more quickly if batteries were only loaded in the camera for a short time before
being removed. Before taking important pictures, check that the date and time
settings are correct.
If the date and time setting is canceled, a warning is displayed on the monitor
the next time the camera is turned on. g“Error codes” (P. 122)
2005
.
01 01
X
GO
OK
SET
SELECT
00 00
:
Y M D
.
200
0
0
005
.
01 01
00 00
:
.
X
GO
OK
SET
SELECT
91
7 Printing pictures
You can print out the pictures you have
taken either at a photo store or at home on
your own printer.
If you go to a photo store, it is a good idea to
store the print reservation data on the card
first. This lets you select the pictures you
want to print and decide how many prints
you want.
If you print the pictures at home, you can
either connect the camera directly to the
printer or you can connect the camera to a
computer and download the pictures to the
computer first.
7
Printing pictures
Printing at the store
Printing at home
Select the pictures
you want to print
at the store
Use the camera to
select the pictures
you want to print
Print
reservation
DirectPrint
92
7
Printing pictures
Direct printing (PictBridge)
By connecting the camera to a PictBridge-compatible printer with the USB cable, you
can print out recorded pictures directly. With the camera connected to the printer,
select the pictures you want to print and the number of prints on the camera’s
monitor. It is also possible to print out pictures using the print reservation data.
g“Print settings (DPOF)” (P. 99)
To find out if your printer is compatible with PictBridge, refer to the printer’s
instruction manual.
What is PictBridge?… It is the standard for connecting digital cameras and printers
of different manufacturers and printing out pictures directly.
STANDARD… All printers that support PictBridge have standard print settings. If
[STANDARD] is selected on the settings screens (P. 93 to P. 97), images are printed
according to these settings. Refer to the printer’s instruction manual for its standard
settings or contact the printer manufacturer.
Using the direct printing function
TIPS
For details of printing paper types, ink cassettes, etc., refer to the printer’s
instruction manual.
Note
You are recommended to use the optional AC adapter when printing pictures.
If you use batteries, make sure they have enough power. If the camera stops
operating while communicating with the printer, the printer may malfunction or
image data may be lost.
Movies cannot be printed.
The camera does not enter sleep mode when connected to the printer by the
USB cable.
Available printing modes, paper sizes etc., vary depending on the printer you
use. Refer to the instruction manual for your printer.
Print modes and settings
Direct printing (PictBridge)
93
7
Printing pictures
Use the USB cable provided to connect the camera to a PictBridge-compatible printer.
The basic printing method for printing one picture is shown below. One print of your
selected picture will be printed using the standard settings of your printer. The date
and file name are not printed.
1Turn the printer on and plug the
printer end of the USB cable into
the printer’s USB port.
For details of how to turn the printer on
and the position of the USB port, refer to
the printers instruction manual.
2Plug the USB cable into the
camera’s multi-connector.
The camera turns on automatically.
The monitor turns on and the selection
screen for the USB connection is
displayed.
3Select [PRINT], and press Z.
[ONE MOMENT] is displayed and the
camera and printer are connected. The
[PRINT MODE SELECT] screen is
displayed on the monitor. Make the print
settings on the camera’s monitor.
4Select [PRINT], and press Z.
The [PRINTPAPER] screen is
displayed.
Printing pictures
Multi-connector
Connector cover
USB
P C
PRINT
EXIT
SELECT GO
OK
PRINT MODE SELECT
PRINT
ALL PRINT
MULTI PRINT
ALL INDEX
SELECT
GO
OK
EXIT
Direct printing (PictBridge)
94
7
Printing pictures
5Press Z without changing the
[SIZE] or [BORDERLESS]
settings.
When the [PRINTPAPER] screen is not
displayed, go to Step 6.
6Press bd to select the picture
you want to print, and press Z.
The [PRINT] screen is displayed.
7Select [OK], and press Z.
Printing starts.
When printing is finished, the [PRINT
MODE SELECT] screen is displayed.
(To cancel printing
Pressing Z during print data transfer displays
the screen for selecting whether to continue or
cancel printing. To cancel printing, select
[CANCEL], and press Z.
PRINTPAPER
SIZE
BORDERLESS
STANDARD STANDARD
SELECT
GO
OK
CANCEL
PRINT
PRINT
PRINT
PRINT
PRINT
OK
O
O
O
OK
K
K
K
OK
MORE
MORE
MORE
MORE
MORE
SELECT
SELECT
SELECT
SELECT
SELECT
PRINT
MORE
SINGLE PRINT
SINGLE PRINT
SINGLE PRINT
SINGLE PRINT
SINGLE PRINT
SINGLE PRINT
SELECT
100
100
100
100
100
-
-
-
--
0005
0005
0005
0005
0005
PRINT
OK
CANCEL
SELECT
GO
OK
CANCEL
CONTINUE
CANCEL
SELECT GO
OK
PRINT
OK
O
O
O
OK
K
K
K
CANCEL
CANCEL
CANCEL
CANCEL
CANCEL
OK
CANCEL
Screen during data transfer
Direct printing (PictBridge)
95
7
Printing pictures
8In the [PRINT MODE SELECT]
screen, press b.
A message is displayed.
9Remove the USB cable from the
camera.
The camera turns off.
10Remove the USB cable from the
printer.
Note
When the [USB] mode is set to [PC], the [PRINT MODE SELECT] screen is not
displayed in Step 4. Disconnect the USB cable, and repeat the procedure from
Step 1.
PRINT MODE SELECT
PRINT
ALL PRINT
MULTI PRINT
ALL INDEX
SELECT
GO
OK
EXIT
Direct printing (PictBridge)
96
7
Printing pictures
There are many other print modes available besides the basic mode. Even within the
same mode, you have the choice of setting a border or the paper size.
Follow the operation guide for the screens shown below.
Selecting a print mode
PRINT Prints the selected picture.
ALL PRINT Prints all the pictures stored in
the internal memory or card.
MULTI PRINT Prints one picture in multiple
layout format.
ALL INDEX Prints an index of all the
pictures stored in the internal
memory or card.
PRINT ORDER Prints the pictures according
to the print reservation data. If
no print reservations have been made, this option is not available.
g“Print settings (DPOF)” (P. 99)
Setting the paper
Select the paper size and border on the [PRINTPAPER] screen.
SIZE Choose from the available
paper sizes on your printer.
BORDERLESS Select framed or unframed. In
[MULTI PRINT] mode, you
cannot select the frame.
OFF ( ) The picture is printed inside a
blank frame.
ON ( ) The picture is printed filling the
entire page.
PICS/SHEET Available in [MULTI PRINT] mode only. The number of prints that
can be printed vary depending on the printer.
Other print modes and print settings
Note
If the [PRINTPAPER] screen is not displayed, [SIZE], [BORDERLESS] and
[PICS/SHEET] are set to [STANDARD].
PRINT MODE SELECT
PRINT
ALL PRINT
MULTI PRINT
ALL INDEX
SELECT
GO
OK
EXIT
Operation guide
PRINTPAPER
SIZE
BORDERLESS
STANDARD STANDARD
SELECT
GO
OK
CANCEL
Direct printing (PictBridge)
97
7
Printing pictures
Selecting the picture you want to print
Press bd to select the picture you want to print. You
can also make your selection by pressing the zoom
button, and using the index display.
PRINT Prints one copy of the picture.
SINGLE PRINT Makes a print reservation for the
picture. The print reservation
icon is displayed.
MORE For setting the number of prints
or printing data.
Setting the number of prints and printing data
Sets the number of prints. You
can select up to 10 prints.
DATE ( ) If you select [WITH], pictures are
printed with the date.
FILE NAME ( ) If you select [WITH], pictures are
printed with the file name.
PRINT
PRINT
PRINT
PRINT
PRINT
OK
O
O
O
OK
K
K
K
OK
MORE
MORE
MORE
MORE
MORE
SELECT
SELECT
SELECT
SELECT
SELECT
PRINT
MORE
SELECT
100
100
100
100
100
-
-
-
--
0005
0005
0005
0005
0005
2
2
2
22
CANCEL
CANCEL
CANCEL
CANCEL
CANCEL
CANCEL
PRINT
PRINT
PRINT
PRINT
PRINT
OK
O
O
O
OK
K
K
K
OK
MORE
MORE
MORE
MORE
MORE
SELECT
SELECT
SELECT
SELECT
SELECT
PRINT
MORESINGLE PRINT
SINGLE PRINT
SINGLE PRINT
SINGLE PRINT
SINGLE PRINT
SINGLE PRINT
SELECT
100
100
100
100
100
-
-
-
--
0005
0005
0005
0005
0005
The print reservation icon
is displayed.
PRINT INFO
DATE
FILE NAME
WITHOUT
WITHOUT
1
GO
GO
GO
GO
GO
OK
O
O
O
OK
K
K
K
SET
SET
SET
SET
SET
SELECT
SELECT
SELECT
SELECT
SELECT
GO
OK
SET
SELECT
Direct printing (PictBridge)
98
7
Printing pictures
If an error code is displayed on the camera’s monitor during direct print setting or
printing, see the following table.
For more details, refer to the printers instruction manual.
If an error code is displayed
Monitor indication Possible cause Corrective action
NO CONNECTION
The camera is not
connected to the printer
correctly.
Disconnect the camera and
connect it again correctly.
NO PAPER
There is no paper in the
printer.
Load some paper in the
printer.
NO INK
The printer has run out of
ink.
Replace the ink cartridge in
the printer.
JAMMED
The paper is jammed. Remove the jammed paper.
SETTINGS CHANGED
The printer’s paper
cassette has been removed
or the printer configuration
has been changed.
Do not reconfigure the
printer after the settings have
been made.
PRINT ERROR
There is a problem with the
printer and/or camera.
Turn off the camera and
printer. Check the printer and
remedy any problems before
turning the power on again.
TIPS
If an error code other than those shown above is displayed, see “Error codes”
(P. 122).
99
7
Printing pictures
Print settings (DPOF)
Print reservation allows you to save printing data (the number of prints and the date/
time information) with the pictures stored on the card.
With print reservation, you can print out pictures easily either at home using a
personal DPOF-compatible printer or at a photo store that supports DPOF. DPOF is
a standard format used to record automatic print information from digital cameras.
You can print out pictures automatically, at home or at a photo store, by storing data,
such as which pictures you want to print and the number of prints, on the card.
Pictures with print reservations can be printed using the following procedures.
Printing using a DPOF-compatible photo store.
You can print the pictures using the print reservation data.
Printing using a DPOF-compatible printer.
Printing is possible directly from a card containing print reservation data without
using a computer. For more details, refer to the printer’s instruction manual. A
PC card adapter may also be necessary.
How to make print reservations
Only pictures stored on the card can be reserved to print. Insert a card with
recorded pictures into the camera before making print reservations.
Pictures stored in the internal memory cannot be printed at a photo store.
The pictures need to be copied to a card before taking them.
g“Copying pictures to a card (BACKUP)” (P. 76)
To use print services without using DPOF
Print settings (DPOF)
100
7
Printing pictures
TIPS
Relation between printing and record mode when shooting
The resolution of a computer/printer is generally based on the number of dots
(pixels) per inch (dpi). Increasing the dpi when printing a picture produces a
finer print. However, as the resolution of the picture is not changed, the size of
the print will be smaller. You can enlarge the size of the print, but the picture
will appear grainy.
If you want to print large, high-quality pictures, set the record mode as high as
possible when taking the pictures. g“Record mode” (P. 27)
Note
DPOF reservations set by another device cannot be changed by this camera.
Make changes using the original device.
If a card contains DPOF reservations set by another device, entering
reservations using this camera may overwrite the previous reservations.
If there is not enough space in the card memory, you may not be able to enter
the reservation data. [CARD FULL] will be displayed.
You can make DPOF print reservations for up to 999 images per card.
Even if an image is displayed with the message [PICTURE ERROR], it may be
possible to make print reservations. In this case, the print reservation icon (<)
is not displayed when the image is displayed for full view. < is displayed when
there are multiple images (index display), allowing you to confirm the print
reservation.
Not all functions may be available on all printers, or at all photo stores.
Print reservation may take a little time when saving printing data to a card.
Print settings (DPOF)
101
7
Printing pictures
How to apply [<] to a selected picture is shown below. Follow the operation guide
to make settings.
Top menu [MODE MENU] [PLAY] [<]
g“How to use the menus” (P. 16)
You cannot make print reservations for pictures with n.
If data is already stored on the card, the [< PRINT ORDER SETTING] screen is
displayed, giving you the choice of resetting the data or keeping it.
1Select [<], and press Z.
2Select the picture you want to
print, and press Z.
3Select [SINGLE PRINT].
Sets the number of prints to 1, and
returns to Step 2.
You can make the following settings on
this screen.
MORE Sets the number of prints
and printing data.
CANCEL Cancels the print
reservation for the
displayed picture.
g“Resetting print reservation data” (P. 103)
END Exits the print reservation function.
Single-frame reservation
SELECT
SELECT
SELECT
SELECT
SELECT
GO
GO
GO
GO
GO
OK
O
O
O
OK
K
K
K
SELECT
GO
OK
CANCEL
PRINT ORDER
Operation guide
’05
05
05
05
05
.
.
.
..
04
04
04
04
04
.
.
.
..
30 15
30 15
30 15
30 15
30 15
:
:
:
::
30 30
30 30
30 30
30 30
30 30
HQ
HQ
HQ
HQ
HQ
OK
O
O
O
OK
K
K
K
SELECT
SELECT
SELECT
SELECT
SELECT
OK
GO
GO
GO
GO
GO
SELECT
GO
Operation guide
CANCEL
MOREEND
SINGLE PRINT
Single-frame reservation
menu
Print settings (DPOF)
102
7
Printing pictures
4The reservation is made. Press Z.
The single-frame reservation menu is displayed.
5Select [END].
The [< PRINT ORDER] screen is displayed. Press b until you return to the
playback screen.
Reserves all the pictures stored on the card. You can set the number of prints or print
the date and time the picture was taken.
Top menu [MODE MENU] [PLAY] [<]
g“How to use the menus” (P. 16)
1Select [U], and press Z.
2Select [<×] (number of prints) or
[X] (date/time), and press d.
3Perform each setting.
(To set the number of prints
Select the number of prints, and press Z.
a: Increases the number.
c: Decreases the number.
All-frame reservation
DATE
0
U
GO
OK
SET
SELECT
All-frame reservation
screen
SELECT GO
OK
U
0
Print settings (DPOF)
103
7
Printing pictures
(
To set the date/time printing data
Select [NO], [DATE] or [TIME], and press Z.
NO The pictures are printed without the date and time.
DATE All the selected pictures are printed with the shooting date.
TIME All the selected pictures are printed with the shooting time.
4After setting the number of prints
and date/time printing data,
press Z to complete the print
reservations.
The < icon is displayed on the picture.
The [< PRINT ORDER] screen is
displayed. Press b until you return to
the playback screen.
This function allows you to reset the print reservation data for pictures stored on the
card.
You can reset all the print reservation data or just for selected pictures.
(To reset the print reservation data for all the pictures
Top menu [MODE MENU] [PLAY] [<]
g“How to use the menus” (P. 16)
1Select [RESET], and press Z.
If there is no print reservation data
stored on the card, the [< PRINT
ORDER SETTING] screen is not
displayed.
Press b to return to the playback
screen.
Resetting print reservation data
’05
05
05
05
05
.
.
.
..
04
04
04
04
04
.
.
.
..
30 15
30 15
30 15
30 15
30 15
:
:
:
::
30 30
30 30
30 30
30 30
30 30
HQ
HQ
HQ
HQ
HQ
2
2
2
22
OK
O
O
O
OK
K
K
K
SELECT
SELECT
SELECT
SELECT
SELECT
OK
GO
GO
GO
GO
GO
SELECT
GO
Print reservation icon
PRINT ORDERED
RESET
KEEP
SELECT
GO
OK
CANCEL
PRINT ORDER SETTING
Print settings (DPOF)
104
7
Printing pictures
(To reset the print reservation data for a selected picture
Top menu [MODE MENU] [PLAY] [<]
g“How to use the menus” (P. 16)
1Select [KEEP], and press Z.
If there is no print reservation data stored on the card, the [< PRINT
ORDER SETTING] screen is not displayed.
2Select [<], and press Z.
3Select the picture with the
reservation you want to cancel,
and press Z.
The single-frame reservation screen is
displayed.
4Select [CANCEL].
The print reservation data is canceled
and the screen returns to Step 3.
5If you are finished resetting print
reservation data, press Z.
Select [END].
The [< PRINT ORDER] screen is displayed.
Press b until you return to the playback screen.
’05
05
05
05
05
.
.
.
..
04
04
04
04
04
.
.
.
..
30 15
30 15
30 15
30 15
30 15
:
:
:
::
30 30
30 30
30 30
30 30
30 30
HQ
HQ
HQ
HQ
HQ
2
2
2
22
OK
O
O
O
OK
K
K
K
SELECT
SELECT
SELECT
SELECT
SELECT
OK
GO
GO
GO
GO
GO
SELECT
GO
CANCEL
MOREEND
SINGLE PRINT
105
8 Connecting the camera to a computer
Viewing the pictures you have taken on your
computer is just one of the many ways you
can enjoy your pictures.
You can print out your favorite pictures, use
the application software to download your
pictures from your camera and edit them or
arrange them by date or category, or attach
them to e-mail and send them over the
Internet.
There are all kinds of ways you can use
your pictures with a computer. You can run
a slideshow, post your pictures on your
home page, create an album, or set your
favorite picture as your desktop wallpaper.
8
Connecting the
camera to a computer
E-mail
Album making
Wallpaper
Panorama building
Home printing
Online
printing
Print pictures Edit pictures
Share with friends
Upload pictures
106
8
Connecting the camera to a computer
Flow
Using the USB cable provided with your camera, you can connect the
camera and computer and download (transfer) the images to your computer
using the OLYMPUS Master software, also provided with the camera.
Install the OLYMPUS Master software gP. 108
Connect the camera to the computer using the USB cable gP. 112
Start up the OLYMPUS Master software gP. 113
Download image files to the computer gP. 115
Disconnect the camera from the computer gP. 116
TIPS
Viewing and editing downloaded images
If you want to process images using graphics applications, make sure you
download the images to your computer first. Depending on the software, the
image files may be damaged if the images are processed (rotated, etc.)
while they are still in the internal memory or on the card.
If the data cannot be downloaded from the camera using the USB cable
Image files on xD-Picture Card may be downloaded using the optional PC
card adapter. For details, visit the Olympus web site at the address shown
on the back cover of this manual.
Note
It is recommended that you use the optional AC adapter when connecting the
camera to a computer. If you use batteries, make sure they have enough
power. The camera does not turn off automatically while it is connected to
(communicating with) a computer. If the battery power runs out, the camera will
stop whatever operation it is performing. This may result in a computer
malfunction, or loss of image data (file) being transmitted.
Do not turn the camera off while it is connected to the computer. Doing so could
cause the computer to malfunction.
Connecting the camera to a computer via a USB hub may cause unstable operation
if there is any problem with compatibility between the computer and the hub. In this
case, do not use a hub, but connect the camera directly to the computer.
OLYMPUS Master CD-ROM USB Cable
Computer equipped with a USB port
Prepare the following items before starting.
107
8
Connecting the camera to a computer
Using OLYMPUS Master
For editing and managing image files, install the OLYMPUS Master
software from the provided CD-ROM.
OLYMPUS Master is application software for editing images taken with a digital
camera on a computer. Installing it on your computer lets you do the following:
For details of functions and operations other than the above, refer to the “Helpguide
and OLYMPUS Master reference manual.
What is OLYMPUS Master?
Download images from the camera or
other media
View images and movies
You can run a slideshow and play back
sound.
Manage images
You can organize your images using the
calendar display. Search the image you
want by date or keyword.
Make panoramic images
You can make panoramic images using
pictures taken in panorama mode.
Print images
You can print images and make indexes,
calendars and postcards.
Edit images
You can rotate images, trim them and
change the size.
Edit images with the filter and
correction functions
Using OLYMPUS Master
108
8
Connecting the camera to a computer
Before installing the OLYMPUS Master software, please confirm that your computer
is compatible with the following system requirements.
For newer operating systems, please refer to the Olympus web site as shown on the
back cover of this manual.
(Operating environment
Windows
OS Windows 98SE/Me/2000 Professional/XP
CPU Pentium III 500 MHz or later
RAM 128 MB or more (at least 256 MB is recommended)
Hard disk capacity 300 MB or more
Connector USB port
Monitor 1,024 × 768 pixels, 65,536 colors or more
Macintosh
OS Mac OS X 10.2 or later
CPU Power PC G3 500 MHz or later
RAM 128 MB or more (at least 256 MB is recommended)
Hard disk capacity 300 MB or more
Connector USB port
Monitor 1,024 × 768 pixels, 32,000 colors or more
Installing OLYMPUS Master
Note
Data transfer is only guaranteed on computers with a factory installed OS.
To install the software in Windows 2000 Professional/XP, you must log on as a
user with administrators’ privileges.
Internet Explorer and QuickTime 6 or later should be installed on your
computer.
Windows XP corresponds to Windows XP Professional/Home Edition.
Windows 2000 corresponds to Windows 2000 Professional.
If you are using Windows 98SE, the USB driver is installed automatically.
Using OLYMPUS Master
109
8
Connecting the camera to a computer
Windows
1Insert the CD-ROM into the
CD-ROM drive.
The OLYMPUS Master setup screen is
displayed.
If the screen is not displayed, double-click
the “My Computer” icon and click the
CD-ROM icon.
2Click the “OLYMPUS Master”.
The QuickTime installation screen is
displayed.
QuickTime is required to use
OLYMPUS Master. If the QuickTime
screen is not displayed, QuickTime 6 or
later is already installed on the
computer. In this case, go to step 4.
Note
Operation is only guaranteed on a Macintosh equipped with a built-in USB port.
QuickTime 6 or later and Safari 1.0 or later must be installed.
Be sure to remove the media (drag & drop onto the trash icon) before
performing the following operations. Failure to do so could result in unstable
computer operation and the need to reboot.
Disconnect the cable connecting the camera to the computer
Turn off the camera
Open the camera’s card cover
Open the camera’s battery compartment cover
Using OLYMPUS Master
110
8
Connecting the camera to a computer
3Click “Next” and follow the on-
screen instructions.
When the QuickTime licensing
agreement is displayed, read the
agreement and click “Agree” to
proceed with the installation.
The OLYMPUS Master installation
screen is displayed.
4Follow the on-screen
instructions.
When the OLYMPUS Master licensing
agreement is displayed, read the
agreement and click “Yes” to proceed
with the installation.
When the “User Information” dialog box
is displayed, enter your “Name” and
“OLYMPUS Master Serial Number”;
select your country and click “Next”.
Refer to the sticker on the CD-ROM
package for the serial number.
When the DirectX licensing agreement
is displayed, read the agreement and
click “Yes”.
A screen asking whether or not you want to install Adobe Reader is
displayed. Adobe Reader is required to read the OLYMPUS Master
instruction manual. If this screen is not displayed, Adobe Reader is already
installed on your computer.
5To install Adobe Reader, click
“OK”.
To cancel installation, click “Cancel”.
Go to Step 7.
The Adobe Reader installation screen is displayed. Follow the on-screen
instructions.
Using OLYMPUS Master
111
8
Connecting the camera to a computer
6Follow the on-screen
instructions.
The screen confirming that installation is
completed is displayed. Click “Finish”.
7Select the option to restart immediately when the screen
asking you if you wish to restart the computer is displayed
and click “OK”.
The computer restarts.
Remove the CD-ROM from the CD-ROM drive and store it.
Macintosh
1Insert the CD-ROM into the
CD-ROM drive.
The CD-ROM window is displayed.
If the CD-ROM window is not displayed,
double-click the CD-ROM icon on the
desktop.
2Double-click on the desired language folder.
3Double-click the “Installer” icon.
The OLYMPUS Master installer starts up.
Follow the on-screen instructions.
When the OLYMPUS Master licensing agreement is
displayed, read the agreement and click “Continue” and
then “Agree” to proceed with the installation.
The screen confirming that installation is completed is displayed.
4Click “Finish”.
The first screen is displayed.
5Click “Restart”.
The computer restarts.
Remove the CD-ROM from the CD-ROM drive and store it.
112
8
Connecting the camera to a computer
Connecting the camera to a computer
Use the USB cable provided with the camera to connect the camera to
your computer.
1Make sure the camera is turned
off.
The monitor is off.
The lens is retracted.
2Plug the USB cable into the USB port on the computer.
Refer to your computers instruction manual to locate the position of the
USB port.
3Plug the other end of the USB
cable into the camera’s multi-
connector.
The camera turns on automatically.
The monitor turns on and the selection
screen for the USB connection is
displayed.
4Select [PC], and press Z.
5The camera is recognized by the
computer.
Windows 98SE/Me/2000
When you connect the camera to your
computer for the first time, the computer
attempts to recognize the camera. Click
“OK” to exit the message that is displayed.
The camera is recognized as a “Removable Disk”.
Monitor
Multi-connector
Connector cover
SELECT GO
OK
USB
P C
PRINT
EXIT
Starting up OLYMPUS Master
113
8
Connecting the camera to a computer
Windows XP
When the camera is connected to the computer, the screen for selecting an
image file operation is displayed. As OLYMPUS Master will be used to
download images, click “Cancel”.
Mac OS X
The iPhoto program is the default application for managing digital images.
When you connect your digital camera for the first time, the iPhoto application
starts automatically, so close this application and start OLYMPUS Master.
Windows
1Double-click the “OLYMPUS Master” icon on the
desktop.
The main menu is displayed.
When OLYMPUS Master is started up for the first time after installation, the
“Registration” dialog box is displayed before the main menu. Follow the
prompts and fill in the registration form.
Macintosh
1Double-click the “OLYMPUS Master” icon in the
“OLYMPUS Master” folder.
The main menu is displayed.
When OLYMPUS Master is started up
for the first time, the “User Information”
dialog box is displayed before the main
menu. Enter your “Name” and
“OLYMPUS Master Serial Number”,
and select your country.
After the “User Information” dialog box,
the “Registration” dialog box is
displayed. Follow the prompts and fill in
the registration form.
Note
The camera functions are disabled while the camera is connected to a
computer.
Starting up OLYMPUS Master
Starting up OLYMPUS Master
114
8
Connecting the camera to a computer
(OLYMPUS Master main menu
c“Transfer Images” button
Downloads images from the camera or other media.
d“Browse Images” button
Displays the browse window.
e“Print Images” button
Displays the print menu.
f“Create and Share” button
Displays the editing menu.
g“Backup Images” button
Creates backup images.
h“Upgrade” button
Displays window for optional upgrade to OLYMPUS Master Plus.
(To exit OLYMPUS Master
1Click the “Exit” on the main menu.
OLYMPUS Master is exited.
c
h
d
e f
g
115
8
Connecting the camera to a computer
Displaying camera images on a computer
You can save camera images on your computer.
1Click “Transfer Images” on the OLYMPUS Master main
menu.
The menu for selecting the source is displayed.
2Click “From Camera” .
The window for selecting images is
displayed. All the images in the camera
are displayed.
3Select the image files and click
“Transfer Images”.
A window indicating that the download
is complete is displayed.
4Click “Browse images now.”.
The downloaded images are displayed
in the browse window.
To return to the main menu, click “Menu
in the “Browse” window.
Downloading and saving images
Note
The orange lamp beside the viewfinder blinks while downloading images. Do
not do any of the following while the lamp is blinking.
Open the camera’s card cover.
Open the camera’s battery compartment cover.
Connect or disconnect the AC adapter.
Displaying camera images on a computer
116
8
Connecting the camera to a computer
(To disconnect the camera
You can disconnect the camera after downloading the images to your computer.
1Make sure that the orange lamp
beside the viewfinder is off.
2Make the following preparations
for disconnecting the USB
cable.
Windows 98SE
1 Double-click the “My Computer” icon
and right-click the “Removable Disk”
icon to display the menu.
2 Click “Eject” on the menu.
Windows Me/2000/XP
1 Click the “Unplug or Eject Hardware” icon
in the system tray.
2 Click the message that is displayed.
3 When a message is displayed saying
that the hardware can be ejected
safely, click “OK”.
Macintosh
1 The trash icon changes to the eject icon
when theUntitledor “NO_NAME” icon
on the desktop is dragged. Drag and drop
it on the eject icon.
Orange lamp
Viewing still pictures and movies
117
8
Connecting the camera to a computer
3Disconnect the USB cable from
the camera.
1Click “Browse Images” on the OLYMPUS Master main
menu.
The “Browse” window is displayed.
2Double-click the still picture
thumbnail that you want to view.
The camera switches to view mode and
the picture is enlarged.
To return to the main menu, click “Menu”
in the “Browse” window.
Note
Windows Me/2000/XP: When you click “Unplug or Eject Hardware”, a warning
message may be displayed. Make sure that image data is not being
downloaded from the camera and that all applications are closed. Click the
“Unplug or Eject Hardware” icon again and disconnect the cable.
Viewing still pictures and movies
Thumbnail
Printing pictures
118
8
Connecting the camera to a computer
(To view a movie
1Double-click the movie thumbnail that you want to see in the
“Browse” window.
The camera switches to view mode and the first frame of the movie is
displayed.
2To play back the movie, click playback button at the
bottom of the screen.
The names and functions of the controller parts are shown below.
Pictures can be printed from the photo, index, postcard and calendar
menus. The explanation below uses the photo menu.
1Click “Print Images” on the OLYMPUS Master main
menu.
The print menu is displayed.
Item Description
1 Playback slider Move the slider to select a frame.
2 Time display Displays the time that has elapsed during playback.
3Playback (pause)
button
Plays the movie. Functions as the pause button during
playback.
4 Back button Displays the previous frame.
5 Forward button Displays the next frame.
6 Stop button Stops playback and returns to the first frame.
7 Repeat button Plays the movie repeatedly.
8 Volume button Displays the volume adjustment slider.
1 2 3 4 5 6 7 8
Printing pictures
Printing pictures
119
8
Connecting the camera to a computer
2Click “Photo” .
The “Photo Print” window is displayed.
3Click “Settings” in the “Photo
Print” window.
The printer settings screen is displayed.
Make the necessary printer settings.
4Select a layout and size.
To print the date and time with your
image, check the box next to “Print
Date”, and select between “Date” and
“Date & Time”.
5Select the thumbnail image that
you want to print and click
“Add”.
A preview of the selected image is
displayed on the layout.
6Select the number of copies.
To download and save images to a computer without using OLYMPUS Master
120
8
Connecting the camera to a computer
7Click “Print”.
Printing starts.
To return to the main menu, click
“Menu”
in the “Photo Print” window.
This camera is compatible with USB mass storage. You can connect the
camera to your computer using the USB cable provided with the camera
to download and save images without using OLYMPUS Master. The
following environment is required to use the USB cable to connect the
camera to your computer.
Windows: Windows 98SE/Me/2000 Professional/XP
Macintosh: Mac OS 9.0 to 9.2/X
Note
If your computer is running Windows 98SE, you will need to install the USB
driver. Before connecting the camera to your computer with the USB cable,
double-click the files from the following folders on the OLYMPUS Master
CD-ROM provided.
(Drive name):\USB\INSTALL.EXE
Data transfer is not guaranteed in the following environments, even if your
computer is equipped with a USB port.
Windows 95/98/NT 4.0
Windows 98SE upgrades from Windows 95/98
Mac OS 8.6 or earlier (However, data transfer is confirmed on Mac OS 8.6
equipped with a factory-installed USB port and USB MASS Storage Support
1.3.5.)
Computers with a USB port added by means of an extension card, etc.
Computers without a factory-installed OS and home-built computers.
To download and save images to a
computer without using OLYMPUS Master
121
9 Appendix
This chapter contains useful information
from OLYMPUS.
Here you will find what to do when you are
stuck or don’t understand the meaning of
the terms used in this manual. Refer to this
section for basic troubleshooting, camera
care and a full glossary to understanding the
terms used in this manual.
Appendix
9
?
?
122
9
Appendix
Troubleshooting
Error codes
Monitor indication Possible cause Corrective action
q
CARD ERROR
There is a problem with
the card.
This card cannot be used. Insert a
new card.
q
WRITE-
PROTECT
Writing to the card is
prohibited.
The recorded image has been
protected (read-only) on a
computer. Download the image to a
computer and cancel the read-only
setting.
>
MEMORY FULL
The internal memory
has no available space,
and cannot record new
data.
Insert a card, transfer pictures to a
card, or erase unwanted pictures.
Download important pictures to a
computer before erasing.
q
CARD FULL
The card has no
available space, and
cannot record new data
(e.g. print reservations,
function shooting, and
memory backup).
Replace the card, or erase
unwanted pictures. Download
important pictures to a computer
before erasing.
L
NO PICTURE
There are no pictures in
the internal memory or
the card.
The internal memory or the card
contain no pictures. Record
pictures.
r
PICTURE
ERROR
There is a problem with
the selected picture and
it cannot be played back
on this camera.
Use image processing software to
view the picture on a computer. If
that cannot be done, the image file
is damaged.
CARD-COVER
OPEN
The card cover is open. Close the card cover.
Y/M/D
When the camera is
used for the first time or
the batteries have been
removed for a long time,
the date and time return
to the factory default
setting.
Set the date and time.
Troubleshooting
123
9
Appendix
g
BATTERY
EMPTY
The battery power is
exhausted.
Replace the batteries with new
ones, or charge the batteries.
This card cannot be
used with this camera
or the card is not
formatted.
Format the card or replace.
Select [POWER OFF] and press
Z. Insert a new card.
Select [FORMAT] and press Z.
All data on the card is erased.
Monitor indication Possible cause Corrective action
CARD SETUP
POWER OFF
FORMAT
SELECT GO
OK
Troubleshooting
124
9
Appendix
(Preparatory operations
(Shooting
Troubleshooting
Possible cause Corrective action Ref.
page
The camera does not turn on or function buttons do not respond.
The power is off. Press the POWER switch to turn the camera
on.
The batteries are loaded
incorrectly.
Reload the batteries correctly.
The battery power is
exhausted.
Replace the batteries with new ones, or
charge the batteries.
The cold is temporarily
affecting battery
performance.
Warm the batteries by putting them in your
pocket for a while.
The camera is in the
sleep mode.
Operate the camera with the shutter button or
#.
The camera is connected
to a computer.
The camera will not operate while it is
connected to a computer.
Possible cause Corrective action Ref.
page
No picture is taken when the shutter button is pressed.
The battery power is
exhausted.
Replace the batteries with new ones, or
charge the batteries.
The camera is in the
playback mode.
Press # to switch to the shooting mode. P. 11
The flash has not
finished charging.
Remove your finger from the shutter button, and
wait until the orange lamp and the
#
(flash
charge) indication stop blinking before taking
the picture.
P. 42
The power is off. Press the POWER switch. P. 9
The internal memory or
card is full.
Erase unwanted pictures or insert a new
card. Before erasing, download important
images to a computer.
P. 77
The battery power was
exhausted during
shooting or while the
images were being written
to the internal memory or
card. (The Monitor turns
off.)
Replace the batteries with new ones, or
charge the batteries. Wait until the orange
lamp turns off when blinking.
The memory gauge is full. Wait until there is space in the memory gauge.
Troubleshooting
125
9
Appendix
There is a problem with
the card.
See “Error codes”. P. 122
The monitor does not turn on.
The camera is set to
[MONITOR OFF].
Press Z in the shooting mode to display the
top menu, then press c to select
[MONITOR ON].
P. 24
The viewfinder or monitor is hard to see.
There is condensation*
inside the camera.
Turn the camera off and wait until it dries
before turning it on again.
The brightness of the
monitor is not adjusted
properly.
Use [s] to adjust monitor brightness. P. 89
The monitor is exposed
to direct sunlight.
Block the sunlight with your hand or use the
viewfinder while taking pictures.
Vertical lines appear on
the monitor screen
during shooting.
Aiming the camera at a bright subject in
sunlight may cause vertical lines to appear
on the screen. This is not a malfunction.
The date recorded with the image data is wrong.
The date/time is not set. Set the date/time. The clock adjustment is
not factory-preset.
P. 90
The camera has been
left without batteries.
If the camera is left without batteries for 3
days, the date/time setting is canceled. Set
the date/time again.
P. 90
The settings are returned to the factory default settings when the camera is turned
off.
[ALL RESET] is set to [ON].
Set [ALL RESET] to [OFF]. P. 81
The picture is out of focus.
The subject was too
close.
Move further away from the subject. To take
pictures closer than 20 cm (7.9") with the
zoom in the maximum wide position, use the
super macro mode.
P. 41
Auto focus is not
possible.
Use the focus lock to focus on your subject. P. 25
There is condensation*
on the lens.
Turn the camera off and wait until it dries
before turning it on again.
Possible cause Corrective action Ref.
page
Troubleshooting
126
9
Appendix
The monitor goes off.
The camera is in the
sleep mode.
Press the shutter button or #.
The power is turned off
with the monitor off.
If [ALL RESET] is set to [OFF], the camera
settings before the power was turned off
remain unchanged. Turn on the monitor, and
turn off the power.
P. 81
The flash does not fire.
The subject is
illuminated.
If you want the flash to fire on a brightly
illuminated subject, set the flash to [#].
P. 42
Sequential shooting is
set.
The flash does not fire in the sequential
shooting mode.
Set [j] to [OFF].
P. 52
The camera records
movies.
The flash does not fire in the movie mode.
Select a shooting mode other than n. P. 50
Super macro mode is
set.
The flash does not fire in the super macro
mode. Set [&] to [OFF] or [&].
P. 41
Panorama mode is set. The flash does not fire in the panorama
mode.
P. 55
The battery run time is brief.
You are using the
camera in a cold
environment.
Battery performance deteriorates in low
temperatures. Keep the camera warm by
putting it inside your coat or clothing.
The remaining battery
power is not indicated
correctly.
When battery consumption fluctuates
considerably, the camera may turn off
without displaying the battery warning
indicator. Replace the batteries with new
ones, or charge the batteries.
The green and orange lamps on the side of the viewfinder blink simultaneously.
The battery power is
exhausted.
Replace the batteries with new ones, or
charge the batteries.
* Condensation: When it is cold outside, the water vapor in the air is rapidly cooled and
turns to droplets of water.
Condensation occurs when the camera is suddenly taken from a cold
place into a warm room.
Possible cause Corrective action Ref.
page
Troubleshooting
127
9
Appendix
(Playback of recorded images
Possible cause Corrective action Ref.
page
Pictures in the internal memory cannot be played back.
A card is inserted in the
camera.
When a card is inserted, only pictures on the
card can be played back. Remove the card.
P. 30,
33
The picture is out of focus.
A subject unsuited to AF
was taken.
Use the focus lock to focus on your subject. P. 25
The camera moved
when the shutter button
was pressed.
Hold the camera correctly and press the
shutter button gently.
Camera movement occurs easily with slower
shutter speeds. When you take a picture with
[$] in a night scene or a dark situation, use
a tripod, or hold the camera firmly.
P. 23
The lens was dirty. Clean the lens. Use a commercially available
blower blush and then wipe with a lens
cleaner to remove dust. Mold may form on
the lens surface if the lens is left dirty.
P. 130
The picture is too bright.
The flash was set to [#]. Select a flash mode other than [#]. P. 42
The center of the subject
is too dark.
If the center of the subject is too dark, the
surrounding area emerges as too bright.
Adjust the exposure compensation toward
minus (–).
P. 44
The [ISO] is at a high
setting.
Set the [ISO] to [AUTO] or to a low sensitivity:
[50]
P. 47
The aperture value is
small in M mode. Increase the aperture value or set the
camera to P mode. P. 46
The shutter speed is too
slow in M mode. Increase the shutter speed or set the camera
to P mode. P. 46
The picture is too dark.
The flash was blocked
by your finger.
Hold the camera correctly, keeping your
fingers away from the flash.
P. 23
Troubleshooting
128
9
Appendix
The subject was out of
the working range of the
flash.
Shoot within the flash working range. P. 42
The subject was too
small and was backlit.
Set the flash to [ #], or use the spot metering
mode.
P. 42,
46
The sequential shooting
mode was used.
Higher shutter speeds are used during
sequential shooting, which may result in
pictures that are darker than usual. Set [j]
to [OFF].
P. 52
The center of the subject
is too bright.
If the center of the subject is too bright, the
image as a whole emerges darker. Adjust the
exposure compensation toward plus (+).
P. 44
The aperture value is too
high in M mode. Decrease the aperture value or set the
camera to P mode. P. 46
The shutter speed is too
fast in M mode. Reduce the shutter speed or set the camera
to P mode. P. 46
Bright subjects such as
snow will turn out darker
than their natural colors
in the image.
Adjust the exposure compensation toward
plus (+).
P. 44
The colors of pictures look unnatural.
Indoor lighting affected
the picture’s colors.
Set the white balance according to the
lighting.
P. 48
No white in the picture. Include something white in the picture, or
shoot using [#]. P. 42
The white balance
setting is wrong.
Adjust the white balance according to the
light source.
P. 48
Part of the picture is dark.
The lens was partly
blocked by your finger or
the strap.
Hold the camera correctly, keeping your
fingers and the strap away from the lens.
P. 23
Pictures you have taken do not appear on the monitor.
The power is off. Press $ to turn the camera on in playback
mode.
P. 10
The camera is in the
shooting mode.
Press $ to switch to playback mode. P. 10,
11
Possible cause Corrective action Ref.
page
Troubleshooting
129
9
Appendix
(When the camera is connected to a computer or printer
There are no pictures in
internal memory or card.
[NO PICTURE] is displayed on the monitor.
Record pictures.
There is a problem with
the card.
See “Error codes”. P. 122
The camera is
connected to a TV.
The monitor does not function when the AV
cable is connected to the camera.
P. 72
Single-frame erase and all-frame erase cannot be performed.
The pictures are
protected.
Cancel the protection of the pictures. P. 75
No picture is displayed on the TV when connected to the camera.
The video output signal
is incorrect.
Set the video output signal according to the
region where used.
P. 73
The TV video signal
setting is incorrect.
Set the TV to the video input mode. P. 72
The monitor is hard to see.
The brightness of the
monitor is not adjusted
properly.
Use [s] to adjust monitor brightness. P. 89
The monitor is exposed
to direct sunlight.
Block the sunlight with your hand.
Possible cause Corrective action Ref.
page
The printer fails to connect.
[PC] was selected on the
monitor after connecting
the camera to the printer
with the USB cable.
Remove the USB cable, and start again from
Step 1 of “Printing pictures”.
P. 93
The printer does not
support PictBridge.
Refer to the printer’s instruction manual or
contact the manufacturer.
The camera is not recognized by the computer.
The computer failed to
recognize the camera.
Disconnect the USB cable from the camera,
and connect it again.
P. 93
The USB driver has not
been installed.
Install OLYMPUS Master. P. 108
Possible cause Corrective action Ref.
page
130
9
Appendix
Camera care
(Cleaning the camera
Exterior:
Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild
soapy water and wring well. Wipe the camera with the damp cloth and then dry
it with a dry cloth. If you have used the camera at the beach, use a cloth soaked
in clean water and wrung well.
Viewfinder and monitor:
Wipe gently with a soft cloth.
Lens:
Blow dust off the lens with a commercial blower, then wipe gently with a lens
cleaner.
(Storage
When storing the camera for extended periods, remove batteries, AC adapter
and card, and keep in a cool, dry place that is well ventilated.
Periodically insert batteries and test the camera functions.
Note
Do not use strong solvents such as benzene or alcohol, or chemically treated
cloth.
Mold may form on the lens surface if the lens is left dirty.
Note
Avoid leaving the camera in places where chemical products are handled since
this may result in corrosion.
131
9
Appendix
AC adapter (optional)
An AC adapter is useful for time-consuming tasks such as image
downloads to a computer.
An optional Olympus AC adapter allows you to power your digital camera
from a common AC wall outlet.
TIPS
When the AC adapter is connected, the power is drawn from the AC adapter
even if there are batteries in the camera. The batteries are not recharged.
Note
Do not connect or disconnect the AC adapter while the camera is turned on.
Doing so could affect the camera’s internal settings or functions.
Be sure to read the instruction manual for the AC adapter.
AC wall outlet
Power plug
AC adapter
Connection
cord plug
DC-IN jack (black)
Connector cover
132
9
Appendix
Safety Precautions
To protect the high-precision technology contained in this product, never
leave the camera in the places listed below, no matter if in use or storage:
Places where temperatures and/or humidity are high or go through
extreme changes. Direct sunlight, beaches, locked cars, or near other
heat sources (stove, radiator, etc.) or humidifiers.
In sandy or dusty environments.
Near flammable items or explosives.
In wet places, such as bathrooms or in the rain. When using products with
weatherproof designs, read their manuals as well.
In places prone to strong vibrations.
Never drop the camera or subject it to severe shocks or vibrations.
When mounted on a tripod, adjust the position of the camera with the tripod
head. Do not twist the camera.
Do not touch electric contacts on cameras.
Do not leave the camera pointed directly at the sun. This may cause lens or
shutter curtain damage, color failure, ghosting on the CCD, or may possibly
cause fires.
Do not push or pull severely on the lens.
Before storing the camera for a long period, remove the battery. Select a
cool, dry location for storage to prevent condensation or mold from forming
inside the camera. After storage, test the camera by turning it on and
pressing the shutter release button to make sure that it is operating normally.
Always observe the operating environment restrictions described in the
camera’s manual.
Olympus NiMH batteries (included in some areas) are intended for use only
with Olympus digital cameras. Never use these batteries with any other
device.
Always charge NiMH batteries (included in some areas) before using them
for the first time, or if they have not been used for a long period.
Always charge sets of batteries (included in some areas) (2 or 4) together.
Do not use alkaline batteries unless it is absolutely necessary. In some
cases, alkaline batteries may have a shorter service life than NiMH or CR-
V3 lithium battery packs. Alkaline battery performance is limited, especially
at low temperatures. The use of NiMH batteries is recommended.
AA manganese (Zinc-Carbon) batteries cannot be used with this camera.
When operating the camera with battery power at low temperatures, try to
keep the camera and spare batteries as warm as possible. Batteries which
run down at low temperatures may be restored after they are warmed at
room temperature.
Caution for Usage Environment
Battery Handling Precautions
Safety Precautions
133
9
Appendix
Recommended temperature ranges for NiMH batteries:
Operation ................. 0°C to 40°C (32°F to 104°F)
Charge ..................... 0°C to 40°C (32°F to 104°F)
Storage..................... -20°C to 30°C (-4°F to 86°F)
Using, charging, or storing the batteries outside these ranges could shorten
battery life or affect battery performance. Always unload the batteries from
the camera before storing the camera for a long period.
Before using NiMH or NiCd batteries, always read the provided instructions.
The number of pictures you can take may vary depending on the shooting
conditions or batteries.
Before going on a long trip, and especially before traveling abroad, purchase
an ample supply of extra batteries. The recommended batteries may be
difficult to obtain while traveling.
Do not push the monitor forcibly; otherwise the image may become vague,
resulting in a Display mode failure or damage to the monitor.
A strip of light may appear on the top/bottom of the monitor, but this is not a
malfunction.
When a subject is viewed diagonally in the camera, the edges may appear
zigzagged on the monitor. This is not a malfunction; it will be less noticeable
in playback mode.
In places subject to low temperatures, the LCD monitor may take a long time
to turn on or its color may change temporarily. When using the camera in
extremely cold places, it is a good idea to occasionally place it in a warm
place. An LCD monitor exhibiting poor performance due to low temperatures
will recover in normal temperatures.
The LCD used for the monitor is made with high-precision technology.
However, black spots or bright spots of light may appear constantly on the
LCD Monitor. Due to its characteristics or the angle at which you are viewing
the monitor, the spot may not be uniform in color and brightness. This is not
a malfunction.
Olympus makes no representations or warranties regarding any damages,
or benefit expected by using this unit lawfully, or any request from a third
person, which are caused by the inappropriate use of this product.
Olympus makes no representations or warranties regarding any damages or
any benefit expected by using this unit lawfully which are caused by erasing
picture data.
LCD Monitor
Legal and Other Notices
Safety Precautions
134
9
Appendix
Olympus makes no representations or warranties, either expressed or
implied, by or concerning any content of these written materials or software,
and in no event shall be liable for any implied warranty of merchantability or
fitness for any particular purpose or for any consequential, incidental or
indirect damages (including but not limited to damages for loss of business
profits, business interruption and loss of business information) arising from
the use or inability to use these written materials or software or equipment.
Some countries do not allow the exclusion or limitation of liability for
consequential or incidental damages, so the above limitations may not apply
to you.
Olympus reserves all rights to this manual.
Unauthorized photographing or use of copyrighted material may violate
applicable copyright laws. Olympus assumes no responsibility for unauthorized
photographing, use or other acts that infringe upon the rights of copyright
owners.
All rights reserved. No part of these written materials or this software may be
reproduced or used in any form or by any means, electronic or mechanical,
including photocopying and recording or the use of any type of information
storage and retrieval system, without the prior written permission of Olympus.
No liability is assumed with respect to the use of the information contained in
these written materials or software, or for damages resulting from the use of the
information contained therein. Olympus reserves the right to alter the features
and contents of this publication or software without obligation or advance
notice.
Disclaimer of Warranty
Warning
Copyright Notice
Safety Precautions
135
9
Appendix
Radio and Television Interference
Changes or modifications not expressly approved by the manufacturer may
void the user’s authority to operate this equipment. This equipment has been
tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Adjust or relocate the receiving antenna.
- Increase the distance between the camera and receiver.
- Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
- Consult your dealer or an experienced radio/TV technician for help. Only
the OLYMPUS-supplied USB cable should be used to connect the camera
to USB enabled personal computers (PC).
Any unauthorized changes or modifications to this equipment would void the
user’s authority to operate.
FCC Notice
136
9
Appendix
Glossary of terms
Aperture
The adjustable lens opening which controls the amount of light that enters the
camera. The larger the aperture, the shorter the depth of field and the fuzzier the
background. The smaller the aperture, the greater the depth of field and the sharper
the background. Larger aperture values indicate smaller apertures, and smaller
aperture values indicate larger apertures.
CCD (Charge-Coupled Device)
This converts light passing through the lens into electrical signals. On this camera,
light is picked up and converted into RGB signals to build a single image.
Contrast Detection Method
This is used to measure the distance to the subject. The camera determines if the
image is focused by the level of contrast in the subject.
Conventional Photograph
This refers to recording images using silver halide (the method for recording images
in conventional, non-digital photography). This system is in contrast to still video and
digital photography.
DCF (Design Rule for Camera File System)
A standard for image files by the Japan Electronics and Information Technology
Industries Association (JEITA).
Digital ESP Light Metering
This determines the exposure by metering and calculating the light levels in the
center and other areas of the image separately.
DPOF (Digital Print Order Format)
This is for saving desired print settings on digital cameras. By entering which images
to print and the number of copies of each, the user can easily have the desired
images printed by a printer or print lab that supports the DPOF format.
Eclipsing (Vignetting)
This refers to when an object obscures part of the field of view so that the whole
subject is not photographed. Eclipsing also refers to when the lens barrel obscures
part of the view seen through the viewfinder. In addition, eclipsing can occur when
an incorrect lens hood is used, causing shadowing to appear in the corners of the
image.
EV (Exposure Value)
A system for measuring exposure. EV0 is when the aperture is at F1 and the shutter
speed is 1 second. The EV then increases by 1 each time the aperture increases by
one F stop or the shutter speed increases by one increment. EV can also be used to
indicate brightness and ISO.
Exposure
The amount of light used to capture an image. The exposure is determined by the
time the shutter is open (shutter speed) and the amount of light that passes through
the lens (aperture).
Glossary of terms
137
9
Appendix
Image size
The size of an image expressed by the number of pixels that make up the image. For
instance, a picture taken with an image size of 640 × 480 fills the computer screen
when the monitor setting is 640 × 480. However, if the monitor setting is
1,024 × 768, the picture only takes up part of the screen.
ISO
A method for indicating film speed by the International Organization for
Standardization (ISO) (ex. “ISO100”). Higher ISO values indicate greater sensitivity
to light, so images can be exposed even in low-light conditions.
JPEG (Joint Photographic Experts Group)
A compression format for still images. Photographs (images) shot using this camera
are recorded in JPEG format. By downloading these images to a computer, users
can edit them using graphics application software or view the images using an
Internet web browser.
M (Manual) Mode
The user sets both the aperture and shutter speed.
NTSC (National Television Systems Committee) / PAL (Phase
Alternating Line)
Television formats. NTSC is mainly used in Japan, North America and Korea. PAL
is mainly used in Europe and China.
PictBridge
A standard for connecting digital cameras and printers of different makers and
printing out pictures directly.
Pixels
A pixel is the smallest unit (dot) used to make up an image. Clear large-sized printed
images require millions of pixels.
P (Program) Mode
Also called Program AE mode. The camera automatically sets the best shutter
speed and aperture for the shot.
Sleep Mode
A mode designed to save battery life. The camera automatically enters the sleep
mode if you do not operate it for a certain time. To exit the sleep mode, use any
button on the camera (shutter button, arrow pad, etc.).
TFT (Thin-Film Transistor) Color Monitor
A transistor color monitor constructed using thin-film technology.
TTL (Through-The-Lens) System
To help adjust exposure, a light receptor built into the camera directly measures the
light passing through the lens.
138
Miscellaneous
This chapter contains all the camera
functions described in Chapters 1 to 8.
Refer here for the names of the camera
parts and buttons, the names and meanings
of the icons that are displayed on the
monitor, and the lists of the top menus and
mode menus.
An index also helps you find the pages
where a function or item that you are looking
for appears. For effective use of the manual,
reference page numbers are listed next to
the names of the camera parts and in the
menu lists.
10
139
10
Miscellaneous
Menu list
Shooting mode (P, i, l, z, j, k, f)
*1
[SCENE SELECT] is displayed when the camera is in
f
mode. In other modes, [
Y
] is displayed.
*2
Available languages vary depending on the area where you purchased this camera.
Top menu Tab Item Setting Ref.
page
MODE MENU CAMERA YOFF, ON P. 53
ESP/ ESP, 5 n P. 46
jOFF, ON P. 52
ISO AUTO, 50, 100, 200, 400 P. 47
DIGITAL ZOOM OFF, ON P. 40
R (still pictures) OFF, ON P. 58
FUNCTION
OFF, BLACK & WHITE, SEPIA, VIVID
P. 54
PANORAMA P. 55
2 IN 1 P. 57
NOISE REDUCTION
OFF, ON P. 59
PICTURE
WB AUTO, 5 3 1, , , > V, P. 48
MEMORY
(CARD)
MEMORY FORMAT
(FORMAT)
YES, NO P. 79
BACKUP YES, NO P. 76
SETUP ALL RESET OFF, ON P. 81
W*2 P. 82
PW ON SETUP SCREEN, SOUND P. 83
REC VIEW OFF, ON P. 85
8OFF, LOW, HIGH P. 85
BEEP OFF, 1, 2 P. 86
SHUTTER SOUND OFF, 1, 2 P. 86
FILE NAME RESET, AUTO P. 88
PIXEL MAPPING START P. 89
sP. 89
XP. 90
VIDEO OUT NTSC, PAL P. 73
SCENE SELECT,
Y
*1
P. 37
P. 53
KSHQ, HQ, SQ1, SQ2 P. 27
MONITOR ON,
MONITOR OFF
P. 24
Menu list
140
10
Miscellaneous
Shooting mode (n)
*1
Available languages vary depending on the area where you purchased this camera.
Top menu Tab Item Setting Ref.
page
MODE MENU CAMERA Y
OFF,
ON P. 53
ESP/5ESP, nP. 46
ISO AUTO, 50, 100, 200, 400 P. 47
DIGITAL ZOOM OFF, ON P. 40
FUNCTION OFF, BLACK & WHITE,
SEPIA, VIVID
P. 54
PICTURE
WB AUTO, 5, 3, 1 >, , VP. 48
MEMORY
(CARD)
MEMORY FORMAT
(FORMAT)
YES, NO P. 79
BACKUP YES, NO P. 76
SETUP
ALL RESET OFF, ON P. 81
W*1 P. 82
PW ON SETUP SCREEN, SOUND P. 83
8OFF, LOW, HIGH P. 85
BEEP OFF, 1, 2 P. 86
FILE NAME RESET, AUTO P. 88
PIXEL MAPPING START P. 89
sP. 89
XP. 90
VIDEO OUT NTSC, PAL P. 73
R (movies) OFF, ON P. 51
KHQ, SQ P. 27
MONITOR ON,
MONITOR OFF
P. 24
Menu list
141
10
Miscellaneous
Shooting mode (h)
*1
Available languages vary depending on the area where you purchased this camera.
Top menu Item Setting Ref.
page
SETUP MEMORY FORMAT
(FORMAT)
YES, NO P. 79
ALL RESET OFF, ON P. 81
W*1 P. 82
PW ON SETUP OFF, 1, 2 P. 83
sP. 89
XP. 90
VIDEO OUT NTSC, PAL P. 73
BACKUP YES, NO P. 76
YOFF, ON P. 53
KSHQ, HQ, SQ1, SQ2 P. 27
MONITOR ON,
MONITOR OFF
P. 24
Menu list
142
10
Miscellaneous
Playback mode (still pictures)
*1
Available languages vary depending on the area where you purchased this camera.
Top menu Tab Item Setting Ref.
page
MODE MENU PLAY < <, UP. 101,
102
RSTART P. 68
EDIT ADD FRAME NEW FILE, CANCEL P. 66
BLACK & WHITE BLACK & WHITE, CANCEL P. 66
SEPIA SEPIA, CANCEL P. 66
Q640 × 480, 320 × 240,
CANCEL
P. 66
MEMORY
(CARD)
ALL ERASE YES, NO P. 78
MEMORY FORMAT
(FORMAT)
YES, NO P. 79
BACKUP YES, NO P. 76
SETUP ALL RESET OFF, ON P. 81
W*1 P. 82
PW ON SETUP SCREEN, SOUND P. 83
SCREEN SETUP P. 84
8OFF, LOW, HIGH P. 85
BEEP OFF, 1, 2 P. 86
VOLUME 0 – 5 P. 87
sP. 89
XP. 90
VIDEO OUT NTSC, PAL P. 73
G4, 9, 16 P. 62
m SETUP NORMAL, SLIDE, FADER,
ZOOM
P. 64
mP. 63
INFO P. 74
0P. 75
Menu list
143
10
Miscellaneous
Playback mode (movies)
*1
Available languages vary depending on the area where you purchased this camera.
Top menu Tab Item Setting Ref.
page
MODE MENU EDIT INDEX OK, RESET, CANCEL P. 69
EDIT OK, RESET, CANCEL P. 70
MEMORY
(CARD)
ALL ERASE YES, NO P. 78
MEMORY FORMAT
(FORMAT)
YES, NO P. 79
BACKUP YES, NO P. 76
SETUP
ALL RESET OFF, ON P. 81
W*1 P. 82
PW ON SETUP SCREEN, SOUND P. 83
8OFF, LOW, HIGH P. 85
BEEP OFF, 1, 2 P. 86
VOLUME 0 – 5 P. 87
sP. 89
XP. 90
VIDEO OUT NTSC, PAL P. 73
G4, 9, 16 P. 62
MOVIE PLAY P. 65
INFO P. 74
0P. 75
144
10
Miscellaneous
List of factory default settings
The functions are set as follows when the camera leaves the factory.
Shooting mode
FNo. F2.8
Shutter speed 1/1000
Zoom 38 mm
Monitor ON
Exposure compensation 0.0
FLASH MODE AUTO (M: # n $ : )
YOFF
ESP/ ESP5
&OFF
jOFF
ISO AUTO (M: 50)
SCENE SELECT o
DIGITAL ZOOM OFF
PANORAMA OFF
FUNCTION OFF
2 IN 1 OFF
NOISE REDUCTION OFF
R (still pictures) OFF
R (movies) ON
KHQ
WB AUTO
REC VIEW ON
FILE NAME RESET
SHUTTER SOUND 1 – LOW
List of factory default settings
145
10
Miscellaneous
Playback mode
Others
* Settings differ according to the region where the camera is sold.
INFO OFF
0OFF
y
<OFF
G9
m SETUP NORMAL
ROFF
VOLUME 3
ALL RESET ON
WENGLISH
PW ON SETUP SCREEN: 1, SOUND: 1
sNORMAL
XY-M-D 2005.01.01 00:00
VIDEO OUT NTSC or PAL *
8LOW
BEEP 1 – LOW
146
10
Miscellaneous
Modes and shooting functions
Mode
Function h
i l
z j
kfM P n
Zoom 9*1
DIGITAL ZOOM 9*1
FLASH MODE 9*2
ESP/59
&9*3
%9*1, *3
Y9
j9*4
FUNCTION — 9
R (still pictures) 9
R (movies) 9
PANORAMA — 9*1
2 IN 1 9*4
SCENE SELECT 9
NOISE REDUCTION 9
K9
ISO 9
Exposure compensation
— —9 9
WB 9
ALL RESET 9
W9
PW ON SETUP 9
REC VIEW 9
FILE NAME 9
PIXEL MAPPING 9
s9
Modes and shooting functions
147
10
Miscellaneous
9: Available —: Not available
*1 Not including o of f mode.
*2 Not including ( *, or & of f mode.
*3 Not including ( of f mode.
*4 Not including (*&, , , and ) of f mode, and z mode.
Mode
Function h
i l
z j
kfM P n
X9
VIDEO OUT 9
89
BEEP 9
SHUTTER SOUND 9
MEMORY FORMAT
(FORMAT) 9
BACKUP 9
148
10
Miscellaneous
Names of parts
Camera
POWER switch gP. 9
Lens
Self-timer lamp gP. 53
Connector cover gP. 72, 93 112 131, ,
DC-IN jack gP. 131
Shutter button gP. 25
Multi-connector gP. 72, 93, 112
Microphone
gP. 51, 58, 68
Flash gP. 42
Speaker
VISUAL INDEX
Names of parts
149
10
Miscellaneous
Zoom button (W/T, GU)
gP. 39, 61
OK/MENU button ( )ZgP. 16, 19
Arrow pad ( )acbd gP. 16, 19
Rotation button ( )ygP. 14, 62
Flash mode button ( )# gP. 13, 42
Erase button ( )S gP. 14, 77
Strap eyelet
Mode dial gP. 12
Monitor gP. 24, , 89 150
Battery compartment
cover
Card cover gP. 31
Tripod socket
Shooting button ( )#gP. 9, 14
Playback button ( )$gP. 9, 13
Viewfinder gP. 24
Orange lamp gP. 31, , 43 116
Green lamp gP. 25, 31
Macro button ( )& gP. 13, 41
VISUAL INDEX
Names of parts
150
10
Miscellaneous
The [INFO] setting allows you to select how much information to display on the
screen. Screens with the information display set on are shown below.
g“Displaying detailed shooting information” (P. 74)
(Shooting modes
Monitor indications
Still picture Movie
Item Indications Ref.
page
1 Shooting mode P M, h, , N I J K L, , , , , |P. 12,
35
2 Shutter speed 15" – 1/2000 P. 46
3 Aperture value F2.8 – F7.0 P. 46
4 Exposure compensation
Exposure differential
-2.0 – +2.0
-3.0 – +3.0
P. 44
P. 46
5 Battery check e f,
6 Green lamp {P. 25,
31
7 Flash stand-by
Flash charge
# (Lights)
# (Blinks) P. 43
8 Macro mode
Super macro mode
&
%P. 41
9 Noise reduction OP. 59
10 Flash mode ! # $, , P. 42
11 Sequential shooting jP. 52
12 Self-timer YP. 53
ISO100
ISO100
ISO100
ISO100
ISO100
2560
2560
2560
2560
2560
1920
1920
1920
1920
1920
HQ
HQ
HQ
HQ
HQ
F2.8
F2.8
F2.8
F2.8
F2.8
1/1000
1/
1/
1/
1/10
10
10
1000
00
00
00
+
+
+
++2.0
2.0
2.0
2.0
2.0
P
P
P
PP
5
5
5
555
1 2 3 4
171615
14
1211
10
8
6
5
7
9
13
19
18
20
22
21
ISO100
ISO100
ISO100
ISO100
ISO100
+2.0
+2.0
+2.0
+2.0
+2.0
HQ
HQ
HQ
HQ
HQ
00:15
00:15
00:15
00:15
00:15
00:15
45 1
18
19
20
21
17161413
10
8
12
VISUAL INDEX
Names of parts
151
10
Miscellaneous
* [IN] is displayed when the internal memory is used. [xD] is displayed when the
card is used.
13 Sound record RP. 51,
58, 68
14 Record mode SHQ, HQ, SQ1, SQ2, SQ P. 27
15 Image size 2560 × 1920, 1600 × 1200, 640 × 480 P. 28
16 AF target mark [ ] P. 25
17
Number of storable still
pictures
Remaining recording time
5
00:15
P. 28
P. 50
18 Spot metering nP. 46
19 ISO ISO50, ISO100, ISO200, ISO400 P. 47
20 White balance 5 3 1 > V, , , , P. 48
21 Memory * [IN], [xD] P. 30
22 Memory gauge a, , b c, d
Item Indications Ref.
page
VISUAL INDEX
Names of parts
152
10
Miscellaneous
(Playback mode
* [IN] is displayed when the internal memory is used. [xD] is displayed when the
card is used.
Still picture Movie
Item Indications Ref.
page
1 Battery check e f,
2 Memory * [IN], [xD] P. 30
3 Print reservation/
number of prints
Movie
<×10
n
P. 97
P. 65
4 Sound record HP. 58
5 Protect 9P. 75
6 Record mode SHQ, HQ, SQ1, SQ2, SQ P. 27
7 Image size
2560 × 1920, 1600 × 1200, 640 × 480, 320 × 240
P. 28
8 Aperture value F2.8 – F7.0 P. 46
9 Shutter speed 15" – 1/2000 P. 46
10 Exposure compensation -2.0 – +2.0 P. 44
11 White balance WB AUTO, 5 3 1 > V, , , , P. 48
12 ISO ISO50, ISO100, ISO200, ISO400 P. 47
13 Date and time ’05.04.30 15:30 P. 90
14 Frame number
Playing time/Total
recording time
5
00:00/00:15
P. 99
P. 65
15 File number M100 – 0005 P. 88
Note
The indications on the movie frame before playback differ from the indications
displayed during playback.
’05
05
05
05
05
.
.
.
.
.
04
04
04
04
04
.
.
.
..
30 15
30 15
30 15
30 15
30 15
:
:
:
::
30
30
30
30
30
100
100
100
100
100
-
-
-
--
0005
0005
0005
0005
0005
HQ
HQ
HQ
HQ
HQ
10
10
10
10
10
5
5
5
55
1/100
1/
1/
1/
1/10
10
10
100
0
0
0
F
F
F
FF
2.8
2.
2.
2.
2.8
8
8
8
+2.0
+2
+2
+2
+2.0
.0
.0
.0
ISO
ISO
ISO
ISO
ISO
400
400
400
400
400
SIZE
SIZE
SIZE
SIZE
SIZE
:
:
:
:
:
5
5
5
55
2560
2560
2560
2560
2560
1920
1920
1920
1920
1920
1 2 3 4
6
7
5
10
11
12
13
14
15
8
9
00
00
00
00
00
:
:
:
::
00/00
00/00
00/00
00/00
00/00
:
:
:
::
15
15
15
15
15
7
7
7
77
/
/
/
// 7
/
100
100
100
100
100
-
-
-
--
0006
0006
0006
0006
0006
HQ
HQ
HQ
HQ
HQ
320
320
320
320
320
240
240
240
240
240
SIZE
SIZE
SIZE
SIZE
SIZE
:
:
:
:
:
’05
05
05
05
05
.
.
.
..
04
04
04
04
04
.
.
.
..
30 15
30 15
30 15
30 15
30 15
:
:
:
::
30
30
30
30
30
5
5
5
55
1 2 3 4 5
6
7
11
13
14
15
VISUAL INDEX
153
Index
10
GLOSSARY INDEX
Index
For reference page numbers relating to camera parts, see “Names of
parts”.
SETUP ................................64
2 IN 1 ........................................57
A
AC adapter..............................131
ADD FRAME.............................66
AF target mark ..........................25
ALL INDEX................................96
ALL PRINT................................96
ALL RESET...............................81
All-frame erase ...................78
All-frame reservation .........102
Aperture value...........................46
AUTO (shooting mode) ....35
Auto focus .................................26
Auto-flash..................................42
AV cable....................................72
AVAILABLE LIGHT PORTRAIT
..............................................38
B
BACKUP ...................................76
Battery.....................................132
Battery check ..................150, 152
BEACH ................................37
BEEP ........................................86
Beep sound .........................85
BEHIND GLASS ..................38
BLACK & WHITE ................54, 66
C
CANDLE ..............................38
Card ..............................28, 30, 31
CCD ..................................89, 136
Close-up playback ................61
Cloudy day ..........................48
Compression.............................27
CUISINE ..............................38
D
Date and time .....................90
DCF.........................................136
DIGITAL ZOOM ....................... 40
Direct printing ........................... 92
DPOF ............................... 99, 136
E
EDIT ................................... 69, 70
Error codes....................... 98, 122
ESP metering ................... 46, 136
EV .................................... 44, 136
Exposure .......................... 25, 136
Exposure compensation..... 13, 44
F
FADER ..................................... 64
FILE NAME .............................. 88
File name ................................. 88
File No...................................... 88
Fill-in flash ............................ 42
FIREWORKS ...................... 37
Flash charging.......................... 43
Flash mode ..................... 13, 42
Flash off .............................. 42
Flash stand-by.......................... 43
Fluorescent lamp ................ 48
Focus ....................................... 25
Focus lock ................................ 25
Folder name ............................. 88
Format ...................................... 79
FORMAT .............................. 79
FUNCTION............................... 54
H
HQ...................................... 27, 29
I
Image size........................ 27, 137
INDEX ...................................... 69
Index display ................. 61, 62
INDOOR .............................. 37
Information display ........ 74
Internal memory ....................... 30
ISO ................................... 47, 137
Index
154
10
Index GLOSSARY INDEX
J
JPEG.......................................137
L
LANDSCAPE .......................35
LANDSCAPE+PORTRAIT ...35
M
Macro mode shooting ...........41
MANUAL .........................36, 46
MEMORY FORMAT .............79
Metering .............................46
MODE MENU............................16
Monitor brightness adjustment
..............................................89
MONITOR OFF.........................24
MONITOR ON...........................24
Motion-JPEG.............................28
MOVIE PLAY .......................65
Movie recording .............36, 50
MULTI PRINT ...........................96
N
NIGHT SCENE ....................35
NOISE REDUCTION ..........59
NORMAL...................................64
NTSC ................................73, 137
Number of storable still pictures
..............................................28
O
OLYMPUS Master ..........107, 113
One-touch white balance
........................................48, 49
Optical zoom .............................39
P
PAL ...................................73, 137
PANORAMA .............................55
PC ...........................................112
PictBridge..........................92, 137
Picture rotation ...............14, 62
PIXEL MAPPING ......................89
Pixels ................................27, 137
Playback mode ........10, 11, 61
Playback on a TV ..................... 72
PORTRAIT .......................... 35
Press fully................................. 26
Press halfway........................... 25
PRINT ................................ 93, 96
PRINT ORDER ........................ 96
Print settings ........................ 99
PROGRAM AUTO ................ 35
Protect ............................... 75
PW ON SETUP ........................ 83
R
REC VIEW ............................... 85
Record mode ................ 27, 29
Recording sound ............ 58, 68
Recording sound with movies
.............................................. 51
Recording sound with still pictures
.............................................. 58
Red-eye reduction flash .... 42
Remaining recording time ........ 28
Resizing ............................. 66
S
Scene mode shooting ..... 37
SCENE SELECT................ 36, 37
SCREEN SETUP ..................... 84
Selecting a language ...... 82
SELF PORTRAIT ................ 37
Self-timer ............................. 53
SEPIA................................. 54, 66
Sequential shooting ............ 52
Shooting mode ......... 9, 11, 13
Shortcut Menus ........................ 16
SHQ ................................... 27, 29
SHUTTER SOUND .................. 86
Shutter speed........................... 46
Single-frame erase ........ 14, 77
Single-frame reservation ... 101
Sleep mode............................ 137
SLIDE....................................... 64
Slideshow ........................... 63
SNOW ................................. 37
SPORT ............................... 35
Spot ................................... 46
Index
155
Index
10
GLOSSARY INDEX
SQ.......................................27, 29
STANDARD ..............................92
Sunny day ............................48
SUNSET ..............................37
Super macro shooting ..........41
T
Top menu..................................16
Tungsten light ......................48
U
USB cable .........................93, 112
USB driver.......................108, 120
V
VIDEO OUT ..............................73
VIVID.........................................54
VOLUME...................................87
W
White balance ....................48
X
xD-Picture Card ........................31
Z
ZOOM .......................................64
Zoom...................................13, 39
http://www.olympus.com/
2005
VH003601
Shinjuku Monolith, 3-1 Nishi-Shinjuku 2-chome, Shinjuku-ku, Tokyo, Japan
Two Corporate Center Drive, P.O. Box 9058, Melville, NY 11747-9058, U.S.A. Tel. 631-844-5000
Technical Support (USA)
24/7 online automated help: http://www.olympusamerica.com/support
Phone customer support: Tel. 1-888-553-4448 (Toll-free)
Our phone customer support is available from 8 am to 10 pm
(Monday to Friday) ET
E-Mail: distec@olympus.com
Olympus software updates can be obtained at: http://www.olympus.com/digital
Premises: Wendenstrasse 14-18, 20097 Hamburg, Germany
Tel: +49 40-23 77 3-0 / Fax: +49 40-23 07 61
Goods delivery: Bredowstrasse 20, 22113 Hamburg, Germany
Letters: Postfach 10 49 08, 20034 Hamburg, Germany
European Technical Customer Support:
Please visit our homepage http://www.olympus-europa.com
or call our TOLL FREE NUMBER* : 00800 - 67 10 83 00
for Austria, Belgium, Denmark, Finland, France, Germany, Italy, Luxemburg, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom
* Please note some (mobile) phone services/provider do not permit access or request an
additional prefix to +800 numbers.
For all not listed European Countries and in case that you can’t get connected
to the above mentioned number please make use of the following
CHARGED NUMBERS: +49 180 5 - 67 10 83 or +49 40 - 237 73 899
Our Technical Customer Support is available from 9 am to 6 pm MET (Monday to Friday)


Product specificaties

Merk: Olympus
Categorie: Niet gecategoriseerd
Model: Camedia C-500 Zoom

Heb je hulp nodig?

Als je hulp nodig hebt met Olympus Camedia C-500 Zoom stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Olympus

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd