Oki Microline 420N Handleiding

Oki Printer Microline 420N

Lees hieronder de 📖 handleiding in het Nederlandse voor Oki Microline 420N (97 pagina's) in de categorie Printer. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/97

User’s

Guide

59348301

ML 420/421 User’s Guide

P/N 59348301, Revision 1.2

February, 2006

Every effort has been made to ensure that the information in

this document is complete, accurate, and up-to-date. Oki Data

assumes no responsibility for the results of errors beyond its

control. Oki Data also cannot guarantee that changes in

software and equipment made by other manufacturers and

referred to in this guide will not affect the applicability of the

information in it. Mention of software products manufactured

by other companies does not necessarily constitute

endorsement by Oki Data.

Written and produced by the Oki Data Training and

Publications Department.

Web Site: http://www.okiprintingsolutions.com.

Trademark Information

OKI and MICROLINE are registered

trademarks of Oki Electric Industry

Company, Ltd.

Epson is a registered trademark of Epson America, Inc.

IBM is a registered trademark of International Business Machines

Corp.

Microsoft and Windows are either registered trademarks or

trademarks of Microsoft Corporation in the United States and

other countries.

Safety

Your Oki printer has been carefully designed to give you years

of safe, reliable performance. As with all electrical equipment,

there are a few basic precautions you should take to avoid

hurting yourself or damaging the printer:

• Carefully read all setup and operating instructions. Be sure

to save all documents for future reference.

• Read and follow all warning and instruction labels on the

printer itself.

• Place your printer on a firm, solid surface. If you put in on

something unsteady, it might fall and be damaged.

• Avoid overheating the printer. Do not place it on a soft

surface, such as a rug, sofa, or bed. The vents may be

blocked, causing the printer to overheat.

• The printer must be installed near a power outlet which will

remain easily accessible.

• Be certain that your power source matches the rating listed

on the back of the printer. If you aren’t sure, check with your

dealer or with your local power company.

• Your printer has a grounded, 3-prong plug as a safety feature.

It will only fit into a grounded outlet. If you can not plug it

in, chances are that you have an older, non-grounded outlet.

Contact an electrician to have it replaced with a grounded

outlet. Do not use an adapter to defeat the grounding.

• To avoid damaging the power cord, do not put anything on it

or place it where it will be walked on. If the cord becomes

damaged or frayed, replace it immediately.

• If you’re using an extension cord or power strip with the

printer, make sure that the total of the amperes required by all

the equipment on the extension is less than the extension’s

rating. Generally, the total ratings of all equipment plugged

into any one power line should not exceed 15 amperes. Don’t

exceed this unless you know that the power line your

equipment is plugged into has a rating above 15 amperes.

Product specificaties

Merk:	Oki
Categorie:	Printer
Model:	Microline 420N
Gewicht:	7430 g
Stroomvoorziening:	120 VAC +6%, -15%;
Kleur:	Nee
Compatibele besturingssystemen:	Windows Vista 32/64, XP, 2000, 98/95, 3.x & NT 4.0; MS-DOS
Maximale resolutie:	240 x 216 DPI
Mediadikte:	0.43 mm
Mean time between failures (MTBF):	20000 uur
Gebruiksindicatie (maximaal):	24000 pagina's per maand
Geluidsdrukniveau (afdrukken):	56 dB
Maximaal aantal kopieën:	6 kopieën
Afmetingen (B x D x H):	398 x 345 x 152 mm
Maximum printsnelheid:	570 tekens per seconde
Levensduur printkop:	400 miljoen tekens
Ribbon life:	4 miljoen tekens