Numark Party Mix Handleiding

Numark DJ Gear Party Mix

Lees hieronder de 📖 handleiding in het Nederlandse voor Numark Party Mix (28 pagina's) in de categorie DJ Gear. Deze handleiding was nuttig voor 142 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/28

User Guide

English ( 2 – 6 )

Guía del usuario

Español ( 7 – 11 )

Guide d’utilisation

Français ( 12 – 16 )

Guida per l’uso

Italiano ( 17 – 21 )

Benutzerhandbuch

Deutsch ( 22 – 26 )

Appendix

English ( 27 )

User Guide (English)

Introduction

Box Contents

Party Mix

Software Download Card

User Guide

Safety & Warranty Manual

Support

For the latest information about this product (system requirements, compatibility information,

etc.) and product registration, visit numark.com.

For additional product support, visit numark.com/support.

Setup

To start using Party Mix:

1. Locate the Serato DJ Lite installation card in the box to download and install the

software.

2. Connect Party Mix’s USB cable to an available USB port on your computer.

3. Connect output devices (headphones, speakers, etc.) to Party Mix.

4. Open the software and start DJ’ing!

Connection Diagram

Computer

Head

hones

Speakers

Features

Front Panel

9 9

11 11

12 12

13 13

15 16 17

18 19

15 16 17

18 19

1. Browse Knob: Rotate this knob to cycle through crates and tracks. Press it to move

forward in the software panels.

2. Load: Press one of these buttons while a track is selected to assign it to Deck 1 or 2,

respectively, in the software.

3. Master Gain: Adjusts the master volume in the software.

4. Cue Mix: Adjusts the software’s audio output to the headphones, mixing between the

cue output and the master mix output.

5. Cue Gain: Adjusts the volume for headphone cueing in the software.

6. Gain: Adjusts the pre-fader, pre-EQ audio level of the corresponding channel in the

software.

7. High EQ: Controls the treble frequencies for the individual channels.

8. Low EQ: Controls the bass frequencies for the individual channels.

9. Channel Volume: Adjusts the volume of the individual channels in the software.

10. Crossfader: Controls the blend between the two decks.

11. PFL/Cue: Press this button to send this channel's pre-fader signal to the Cue Channel for

monitoring. When engaged, the button will be lit. By pressing one PFL button at a time,

you will cue that channel alone (and deactivate PFL monitoring for the other channels). To

cue to multiple channels simultaneously, press the PFL buttons for those channels at the

same time.

12. Platter/Jog Wheel: This jog wheel controls the audio when the wheel is moved. When

the Scratch button is not active, use the jog wheel to bend the pitch of the track. When

the Scratch button is active, use the jog wheel to grab and move the audio, “scratching”

the track as you would with a vinyl record.

Product specificaties

Merk:	Numark
Categorie:	DJ Gear
Model:	Party Mix
Kleur van het product:	Zwart
Ingebouwd display:	Nee
Type aansluitplug:	3,5 mm
Snelstartgids:	Ja
Audio-ingang (L, R):	1
Hoofdtelefoonuitgangen:	1
Meegeleverde software:	Virtual DJ LE
Equalizer-instellingen:	Ja
Soort voeding:	AC
Backlight toetsen:	Ja
Ondersteunt Mac-besturingssysteem:	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.9 Mavericks
Apple docking-compatibiliteit:	Niet ondersteund
USB direct afspelen:	Nee
Ingebouwde optical-drive:	Nee
Mixersectie:	Ja
Aantal mixerkanalen:	2 kanalen