Nubert nuBoxx A-125 pro Handleiding

Nubert Speaker nuBoxx A-125 pro

Lees hieronder de 📖 handleiding in het Nederlandse voor Nubert nuBoxx A-125 pro (12 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/12
nuBoxx A125 pro
Safety instructions
Operating manual
Technical data
Warranty terms
If you have any questions or problems with the commissioning of
your Nubert system, please feel free to contact our service team.
Please have your customer number ready.
The latest manuals and other helpful information can be found here:
https://www.nubert.de/anleitung-nuboxx-a-125-pro/1107/
Phone: +49 (0)7171 87120
E-Mail: info@nubert.de
Thank you very much for choosing the nuBoxx A-125 pro active
loudspeakers. You will be able to set up your system without any
problems if you read these operating instructions carefully.
We will explain the operation, connection and installation so that
you can achieve the optimum sound quality and fully enjoy your
nuBoxx speakers!
Nubert electronic GmbH hereby declares that this product complies
with the 2014/53/EU directives, provided that it is installed and used in
accordance with the manufacturer‘s instructions. The full text of the EU
Declaration of Conformity is available at the following Internet address:
https://www.nubert.de/konformitaetserklaerungen/716/
• Do not change the serial number on the speaker. It is part of the
operating approval.
• If the loudspeaker is repaired or modied by workshops or other third
parties not authorized by Nubert, it loses its operating license.
• Only accessories and devices may be connected which in turn
comply with all legal requirements and are approved.
• The loudspeaker may only be used for the applications specied in
the „Intended Use“ section.
Intended use
This speaker is designed exclusively for sound reproduction in dry
rooms. Use the speaker only as described in this manual. Any other use
(particularly safety-relevant or medical use, installation in open environ-
ment like IP-certied products) is considered improper and may result
in property damage or even personal injury. Nubert electronic GmbH
does not assume any liability for damages caused by improper use.
Safety instructions
The entire operating manual, in particular the safety instructions, must
be read in full before connecting and commissioning the device. For
your own safety, be sure to follow all warnings and safety instructions
in this manual and on the speaker. The user is not permitted to carry
out any work on the loudspeaker other than the described work. Keep
this document so that you have access to it at all times. Furthermore, it
must also be handed over to possible re-owners.
Key to the symbols
The triangle symbol with exclamation mark (without additional
comment) indicates important instructions for commissioning,
operation and maintenance of the device.
The term next to the triangle symbol indicates a medium Caution!
risk. Failure to observe this warning may result in property damage.
The term next to the triangle symbol indicates a high risk. Danger!
Failure to observe this warning may result in death or personal injury
This symbol indicates that you must read and observe the
operating instructions and the safety and warning notices in
order to operate the device.
This symbol (triangle with lightning) warns of dangerous vol-
tages inside the enclosure and of hazards due to electric shock.
This symbol indicates that the device complies with electrical
protection class 2 and therefore does not require earthing.
Devices with this symbol may only be used in a dry indoor
environment.
Devices and batteries marked with the symbol of the crossed-
out garbage can, must not be discarded as unsorted urban
waste. They may, for example, be taken to the approved
collection points for separate collection from unsorted urban
waste. For further information, please refer to our General Terms and
Conditions (GTC/AGB).
Trademarks
All trademarks and registered trade names are the property of their
respective owners.
The Bluetooth word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by Nubert is under
license.
General information
Never operate the loudspeaker unattended!
Danger of electric shock!
To avoid the risk of electric shock, the speaker may not be opened by
the user. There are no user-serviceable parts inside the speaker. Service
work and repairs are reserved for qualied specialists authorized by
Nubert. If you need service, please contact Nubert electronic GmbH
directly (info@nubert.de)!
Danger of suocation!
Never let children use or play with neither speaker, remote control or
packaging unattended. There is a risk that children will get caught in
the packaging lm and suocate. Make sure that children cannot
remove any small parts from the devices! These parts, like the remote
control battery, could be swallowed and cause suocation. In case of
swallowing any parts, contact a doctor immediately!
Danger of injury or damage!
When moving the speaker, take care to avoid injury and damage!
Caution!
Since the speaker can only be completely disconnected from the
mains at the mains input on the rear of the unit or by pulling the mains
plug from the socket, it must be positioned so that you have free
access to the mains input or mains plug. If any of the following
situations occurs, the loudspeaker must be switched o immediately
and disconnected from the mains. Contact Nubert electronic GmbH
(info@nubert.de) immediately!
• The speaker has been damaged or has fallen down.
• Power cord or plug is damaged
• Objects or liquid did get into the loudspeaker
• The speaker has been exposed to excessive moisture or rain.
• The speaker does not work properly or exhibits a signicant
reduction in performance.
• The loudspeaker smells burnt, develops smoke or makes
unusual noises.
Only use accessories recommended by Nubert!
Device approval and conformity
with EC directives
2
nuBoxx A-125 pro · 03/2022
Installation instructions
Caution!
An unstable location can damage the speaker.
• Only place the loudspeaker on a at, stable surface and make sure
that it cannot be knocked over!
• Also make sure that no unintentional pulling can occur on the
cables to avoid knocking over the speaker or damaging the
connection sockets!
• Keep strong mechanical shocks away from the loudspeaker!
Caution!
Excessive heat build-up inside the unit can shorten its service life or
lead to re.
• Never cover the back of the speaker! Make sure that there is a clea-
rance of at least 10 cm and sucient air circulation in the back area!
• Do not operate the speaker and remote control near heat sources
such as radiators or stoves!
• Do not expose the speaker or the remote control to direct sunlight.
• Never place burning candles or similar open re sources on the
loudspeaker!
Danger of explosion!
Installation in unsuitable locations can cause explosions.
Do not use the speaker or remote control
• in environments where there is a risk of re or explosion!
• at extremely low or extremely high temperatures!
• near ammable gases or vapours!
• near strong dust!
• near ammable materials!
Danger of electric shock!
The loudspeaker carries mains voltage and voltages higher than 35 V
AC or DC inside. It has no special protection against the intrusion of
liquids or objects into the system. There is therefore a risk of lethal
electric shock.
• Never touch the speaker with wet hands!
• Only use the speaker in a dry place!
• Do not operate it outdoors or in damp rooms!
• The loudspeaker must be protected from liquids of all kinds,
including dripping and splashing water.
• Do not place any containers containing liquids (e.g. ower vases) on
the speaker or in the immediate vicinity!
• If the loudspeaker is moved from a cold environment to a warm
room, condensation may form inside the unit. Wait at least six hours
until the loudspeaker has reached room temperature and is dry
before switching it on!
• No objects or foreign bodies may get into the device.
Should the loudspeaker come into contact with liquids or should
objects have got inside, please unplug the mains plug immediately
and contact Nubert electronic GmbH (info@nubert.de)!
Danger of injury or damage!
For speakers with threaded bushings on the underside:
The threaded bushings may be used for upright mounting of the
loudspeaker on suitable base plates only. The threaded bushings on
the underside of the loudspeaker enclosures are not designed for
tensile loads and must therefore not be used as holders for hooks or
similar devices in order to suspend the loudspeaker cabinet. A falling
speaker may cause serious injury and damage.
Connection instructions
General connection instructions
• Disconnect the mains plug before changing any wiring on
the system!
• Make sure that all connections have been made correctly and that all
plugs are rmly seated in the sockets before connecting the speaker
to the mains.
• Use only the intended cables or plug connections for the connec-
tions! Failure to do so may result in damage or malfunction.
• If you want to disconnect connections on the loudspeaker, always
pull the plug, never the cable!
• Ensure that all plugs are rmly seated in the sockets!
• Only use cables and accessories recommended by Nubert!
Danger of electric shock!
Faulty mains supply systems or excessive mains voltage can lead to
electric shocks.
• All power supply or antenna systems connected to the loudspeaker
must comply with all applicable laws and regulations and be profes
sionally installed by an approved installation company.
• Use only the appropriate power cord to connect the speaker.
Do not modify the power cord or its plug.
• Make sure that the mains voltage at your location matches the requi
rements of the loudspeaker! The correct power supply can be found
on the label on the back of the speaker. It must not be connected to
other power supplies.
• Devices of Class 1 construction must be connected to the mains
power socket outlet with a protective earth connection. Make sure
that the installation of the protective earth is carried out correctly!
• When laying the power cables, make sure that they cannot be dama-
ged (e.g. by heating or mechanical stress)! Pay particular attention to
the areas of the connectors and distributors!
Caution!
Overvoltage in the power supply system (e.g. due to lightning) can
damage or destroy the device and power supply unit.
• An overvoltage protection element can provide a certain degree of
protection against excessively high voltages in the power grid.
• However, the greatest possible protection against damage can only
be achieved with the complete separation from the mains supply.
In case of thunderstorms or danger of lightning strikes, disconnect
the mains cable from the socket and any antenna plugs from your
hi- system!
• If the speaker is not used for a long period of time or is unattended,
the power supply should be disconnected. Disconnect the mains
plug from the socket!
3
nuBoxx A-125 pro · 03/2022

Product specificaties

Merk: Nubert
Categorie: Speaker
Model: nuBoxx A-125 pro

Heb je hulp nodig?

Als je hulp nodig hebt met Nubert nuBoxx A-125 pro stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Speaker Nubert

Nubert

Nubert nuBoxx A-125 pro Handleiding

11 Februari 2025
Nubert

Nubert nuZeo 15 Handleiding

11 Februari 2025
Nubert

Nubert nuLine RS-54 Handleiding

31 Januari 2025
Nubert

Nubert nuPro X-6000 RC Handleiding

20 Februari 2024
Nubert

Nubert nuPro XS-4000 RC Handleiding

20 Februari 2024
Nubert

Nubert nuPro XS-3000 RC Handleiding

20 Februari 2024

Handleiding Speaker

Nieuwste handleidingen voor Speaker

RCF

RCF KX 32-A Handleiding

11 Februari 2025
Helix

Helix Pure PF K165.2 Handleiding

10 Februari 2025
Helix

Helix Pure PF C130.2 Handleiding

10 Februari 2025
Helix

Helix Compose CB C460.2-S3 Handleiding

10 Februari 2025
Helix

Helix Compose CB K130.2-S3 Handleiding

10 Februari 2025
Helix

Helix Compose CB K100.2-S3 Handleiding

10 Februari 2025
Helix

Helix Compose CB C130.2-S3 Handleiding

10 Februari 2025
Helix

Helix Compose Ci3 W165FM-S3 Handleiding

10 Februari 2025
Helix

Helix Compose Ci3 C100.2FM-S3 Handleiding

10 Februari 2025
Helix

Helix Compose Ci3 K100.2FM-S3 Handleiding

10 Februari 2025