Nilfisk SW200 Handleiding
Nilfisk
Veegmachine
SW200
Lees hieronder de 📖 handleiding in het Nederlandse voor Nilfisk SW200 (28 pagina's) in de categorie Veegmachine. Deze handleiding was nuttig voor 80 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/28
SW200 700/SW250 920/FLOORTEC FLOORTEC 592M 570M/
MANUAL PUSH SWEEPER
INSTRUCTION FOR USE
ENGLISH INTRODUCTION FOR USE………………………………...……... 3
DEUTSCH ANWEISUNGEN ZUM GEBRAUCH…………………………….... 4
FRANÇAIS MODE D'EMPLOI…………………………………………………... 5
NEDERLANDS INSTRUCTIES VOOR GEBRUIK…………………………..……... 6
ITALIANO ISTRUZIONI PER L’USO…………………………………………... 7
NORSK BRUKSANVISNING………………………………………………... 8
SVENSKA BRUKSANVISNING………………………………………………... 9
DANSK BRUGSANVISNING………………………………………………... 10
SUOMI KÄYTTÖOPAS……………………………………………….……... 11
ESPAÑOL INSTRUCCIONES PARA EL USO………………………….…….... 12
PORTUGUÊS INSTRUÇÕES DE UTILIZAÇÃO…………………………………… 13
ΕΛΛΗΝΙΚΆ ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ…………………………………………..……... 14
TÜRKÇE KULLANMA TALİMATI………………………………………….... 15
SLOVENŠČINA NAVODILA ZA UPORABO………………………………….……... 16
SLOVAK NÁVOD NA POUŽITIE............................................................……... 17
ČESKÝ NÁVOD K OBSLUZE………………………………………………... 18
POLSKI INSTRUKCJA UŻYTKOWANIA.............................................……... 19
MAGYAR HASZNÁLATI UTASÍTÁSOK………………………………..……... 20
ROMÂNĂ ŢINSTRUC IUNI DE UTILIZARE...........................................…….... 21
БЪЛГАРСКИ УКАЗАНИЯ ЗА УПОТРЕБА………………………………..…….... 22
РУССКИЙ ИНСТРУКЦИЯ ПО ПРИМЕНЕНИЮ..................................……..... 23
EESTI KEEL KASUTUSJUHEND…………………………………………..……... 24
LATVISKI LIETOŠANAS INSTRUKCIJA…………………………………….... 25
LIETUVIŲ NAUDOJIMOSI INSTRUKCIJOS...........................................……... 26
Model: 50000493/50000494/50000495/50000496
Re 017 v.01 Ju y 2lVP11016
TECHNICAL ......... DATA ..................................……......................... 27
MACHINE DESCRIPTION
2
ENGLISH INSTRUCTION FOR USE
3
INTRODUCTION
NOTE: The numbers in brackets refer to the components shown in
Machine Description chapter.
Before operating the machine, carefully read this
manual.
SPARE PARTS AND MAINTENANCE
Any repair must be performed at an authorized Nilfisk Service Centre
by qualified personnel, using Nilfisk original spare parts and
accessories only. For more information, please contact the local dealer.
UNPACKING/DELIVERY
Upon delivery, check that the packing and the machine are not
damaged during transportation. In case of visible damages, keep the
whole packing to have it checked. Contact the Dealer immediately to
file a freight damage claim.
Check contents of package to ensure that following items are included:
1, Machine
2, Side broom (x1 or x2)
3, Side broom screws (x3 or x6)
4, Handlebar
5, Handlebar nuts(x2)
6, Instruction for use and Part list
GENERAL INSTRUCTIONS
Specific warnings and cautions about potential damage to people and
the machine are shown below.
WARNING!
To reduce the risk of fire or personal injuries:
The sweeper is not suitable for collecting dangerous powders.
The sweeper is not suitable to collect liquids.
The sweeper must be used in dry conditions, it must not be used
or kept outdoors in wet conditions.
Do not collect toxic, carcinogen, combustible materials or other
dangerous materials such as asbestos, arsenic, barium, beryllium,
lead, pesticide or other harmful materials.
Do not collect burning cigarette butts or other burning objects
such as ash, matches or similar.
To remove glass, metals or sharp objects from the hopper, wear
thick gloves to prevent personal injuries.
Empty the hopper after each use.
Do not use the sweeper on inclined surfaces.
Do not allow to be used as a toy. Pay careful attention when using
the machine near children.
Use only original Nilfisk brooms.
During the sweeper operation, foreign materials may get into the
eyes of the operator. Thus, it is advisable to wear protective
glasses.
Please be watchful. Pay careful attention to the machine
operation and use common sense. Do not use the machine when
tired, absent-minded, under the effect of drugs, alcohol or
medicines which can compromise the control over the machine.
MACHINE DESCRIPTION
(see figure on page2)
1. Handlebar Assembly as page2 B
2. Handle adjusting knobs
3. Hopper
4. Hopper handle
5. Side broom height adjusting knob
6. Side broom Assembly as page2 A
7. Main broom height adjusting knob
8. Main broom
9. Main broom adjusting indicator
10. Drive wheel
11. Caster
12. Chassis
13. Filter
14. Belt
15. Belt tension structure
16. Main broom rotation direction
17. Side broom rotation direction
SWEEPER OPERATION
1. If necessary, adjust the handlebar (1) to one of the 3
positions (show as page2 C) by using the knobs (2).
2. Hold the handlebar and push the machine forward no faster
than a normal walking pace. The machine does not work if
dragged backwards.
3. The hopper (3) should be emptied after each working cycle
and whenever it is full.
AFTER USING THE MACHINE
After working, before leaving the machine: empty the hopper (3)
and check the main broom (8) to remove foreign materials (lace,
wire, strings or similar) which can compromise the correct
operation.
To store the machine in a narrow place, fold the handlebar (1).
Loosen the knobs (2) and pull the handlebar upwards.
Fold down the handlebar and lock it.
Then place the machine in a vertical position to preserve the
broom bristles.
ADJUSTMENT
Adjust the broom height when the bristles are worn or when their
efficiency is compromised.
1. Adjust the height of the main broom (8) with the knob (7),
the yellow indicator (9) on the knob will rotate to indicate
the adjustment.
Note: If the main broom ground pressure
is adjusted over “+”, higher physical force
is required to push the machine, and the
broom wear is increased.
2. Adjust the height of the side broom (6) with the knob (5).
To turn the side broom up from the ground, screw the upper
part of the knob counter-clockwise, then fix the under part
of the knob.
In opposite, to turn the side broom down, unscrew the under
part of the knob first and then turn the upper part of the
knob clockwise, after that, fix the under part of the knob.
3. If the belt (14) is loose, adjust it by the belt tension structure
(15). Unscrew the two screws on the structure, and then
move the structure (15) to appropriate position and fix the
two screws.
After the adjustment, push the machine to check if it moves
smoothly, without difficulty or resistance. Otherwise, repeat the
adjustment procedure.
If the brooms or belt is worn, replace it.
SCRAPPING
Have the machine scrapped by a qualified scrapper.
Product specificaties
Merk: | Nilfisk |
Categorie: | Veegmachine |
Model: | SW200 |
Kleur van het product: | Black, White |
Gewicht: | 19500 g |
Breedte: | 850 mm |
Diepte: | 1470 mm |
Hoogte: | 1120 mm |
Droog vuil: | 38 l |
Geschikt voor buitengebruik: | Ja |
Maximum area performance: | 1920 m²/uur |
Heb je hulp nodig?
Als je hulp nodig hebt met Nilfisk SW200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Veegmachine Nilfisk
19 Maart 2024
4 Augustus 2023
27 Juli 2023
27 Juli 2023
27 Juli 2023
28 Juni 2023
24 Juni 2023
Handleiding Veegmachine
- Veegmachine Karcher
- Veegmachine Easymaxx
- Veegmachine Einhell
- Veegmachine Gude
- Veegmachine Haier
- Veegmachine Hyundai
- Veegmachine Lavorwash
- Veegmachine Parkside
- Veegmachine Powerplus
- Veegmachine Scheppach
- Veegmachine Stiga
- Veegmachine Taski
- Veegmachine Texas
- Veegmachine Viper
- Veegmachine Vonroc
- Veegmachine Westfalia
- Veegmachine Sun Joe
- Veegmachine Tornado
- Veegmachine Anova
- Veegmachine Choice
- Veegmachine Blodgett
- Veegmachine Mytee
- Veegmachine Ghibli & Wirbel
Nieuwste handleidingen voor Veegmachine
15 November 2024
15 November 2024
2 November 2024
6 September 2024
5 September 2024
29 Augustus 2024
18 Augustus 2024
18 Augustus 2024
18 Augustus 2024
10 Juli 2024