NHT Audio iW4-ARC Handleiding

NHT Audio Speaker iW4-ARC

Lees hieronder de 📖 handleiding in het Nederlandse voor NHT Audio iW4-ARC (14 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/14

1NHT

iiW4 ARC

In-Wall Loudspeaker Installation Guide

Table of contents

1) Introduction

2) Placement

3) Wiring

4) Getting Wired

5) Drill with Caution!

6) Installation: New Construction (ceilings not installed – you see ceiling joists when you look up)

7) Installation: Existing Construction (retrofitting finished ceilings)

8) Painting

9) In Use

10) Optimizing Sonic Performance

11) Maintenance

12) Service & Support & Troubleshooting

13) Professional Specifications

In-Wall Loudspeaker

Installation Guide

Now Hear This.

2NHT

iW4 ARC

In-Wall Loudspeaker Installation Guide

Introduction

We’re glad you chose an NHT in-wall loudspeaker. We won’t let you down – we promise. Please take a few minutes to read this entire

Installation Guide prior to installing your new speakers. The information provided will help you to obtain maximum performance from

your audio system. If you have questions or need assistance at any time before, after or during the installation or operation of your new

speakers, we are here to help.

Our telephone number is: 707-747-0122

Our web address www.nhthifi.com

What’s In The Box?

(1) iW4-

ARC

speaker assembly

(1) Metal grill

(1) Cardboard Cutout Template

Before we start, please, consider hiring a pro installer to do this while you go fishing with some old friends.

Cutting holes in walls (and ceilings) and installing heavy objects above you and your loved ones heads is serious business. There are

also numerous decisions concerning wiring, control systems, methods, and best practices only a professional will have knowledge of.

Please consult a professional to install this speaker.

Speaker Assembly Metal Grille Cardboard Cutout

Template

IW4 Cutout

Template

R13

3NHT

iiW4 ARC

In-Wall Loudspeaker Installation Guide

Find an Installer near you by visiting www.nhthifi.com - navigate to the Where to Buy section or visit www.cedia.org to find a CEDIA

installation professional.

One last word of advice - It is up to you to insure that the installer (NHT referred or not) possesses sufficient skill, the proper tools,

knowledge of local fire and building codes, and a familiarity with the structure of the building (especially wall and/or ceiling materials,

layouts, electrical and plumbing lines, etc.).

With the above said, we know there are capable do-it-yourselfers. If you are one of them and want to install the speaker on your own

or with the help of an expert friend, read on. If you have questions or need assistance at any time before, during or after the installation

or about the operation of you new speakers, we’re here to help. Finally, like our fathers told us, measure twice and cut once.

First Paint Warning: NHT recommends that you use a capable, professional painter only to paint this speaker grill (if necessary to per-

fectly match the wall or ceiling). Latex paint will definitely clog the micro-perforated grill holes and constrict the speaker’s performance

capability. Contact us if you need a new grill cover because yours is plugged up with paint. Unfortunately they are not free.

Placement

NHT

ARC

series of in-ceiling and in-wall speakers are designed for installation in sheetrock, plaster and lath, wood and material combina-

tion (sheer walls if building codes allow) ceilings up to 2 1/4” thick almost always between standard wood joists. Their moisture resistant

drive units,

ARC

frames and stainless steel hardware allow them to be installed in moisture prone interiors and protected exterior envi-

ronments such as bathrooms, indoor swimming pool rooms, above covered porches, sauna rooms and under eave structures. Exposed

outdoor use is not recommended. We make specific “All-Weather” Outdoor speakers for this application.

Spend some time considering placement prior to installing the speakers. Once they are installed, they are permanent, so their location

should be selected carefully. When possible, locate the speakers at a minimum 1-2 feet from adjacent sidewalls and ceilings to allow

them to radiate over the widest possible area. If ceiling mounted, the speaker should face the listening area directly. The speakers

should be mounted on a flat surface to ensure a good seal between the iW4-

ARC

chassis and the mounting surface – the speaker’s frame

is rigid and will not flex! For the best stereo effect, position the speakers so that they are equidistant from the most likely listening area.

If the iW4-

ARC

is used in-wall or in-ceiling speakers as rear (surround or back) channels in a home theater system, make sure to install

them behind the listening for best results. If you wish to get an idea how they will look, try taping the supplied cutout templates to the

ceiling or print to scale one of the images from our website full-size if possible and tape to the ceiling (maybe Kinko’s will do this for

you). For more information about home theater speaker placement recommendations, try Dolby Labs website at: www.dolby.com/us/

en/consumer/setup/connection-guide/home-theater-speaker-guide/index.html

Product specificaties

Merk:	NHT Audio
Categorie:	Speaker
Model:	iW4-ARC

Heb je hulp nodig?

Als je hulp nodig hebt met NHT Audio iW4-ARC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Speaker NHT Audio

NHT Audio iW4-ARC Handleiding

23 November 2023

NHT Audio Classic Two C Handleiding

22 Juni 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Creative Sound Blaster Katana Handleiding

24 December 2024

Creative Muvo 1C Handleiding

24 December 2024

Savio BS-03 Handleiding

24 December 2024

23 December 2024

23 December 2024

23 December 2024

23 December 2024

23 December 2024

23 December 2024

23 December 2024