Newland HR1550-30 Handleiding

Newland Barcode lezer HR1550-30

Lees hieronder de 📖 handleiding in het Nederlandse voor Newland HR1550-30 (10 pagina's) in de categorie Barcode lezer . Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/10

Owner’s Manual

P143

P153

P163

P253

P363

PC251

PC351

2INFINITY PRIMUS SPEAKERS

INFINITY PRIMUS

® SERIES

The Primus series of loudspeakers continues the longstanding Innity

commitment to accurate sound reproduction. Our proprietary MMD

(Metal Matrix Diaphragm) drivers, precision dividing networks and rigid,

well-braced enclosures combine to deliver uncompromised performance

in any stereo or multichannel home theater system. In addition, Primus

series speakers are magnetically shielded for safe placement adjacent to

a television.

UNPACKING THE SPEAKERS

If you suspect damage from transit, report it immediately to your dealer.

Keep the shipping carton and packing materials for future use.

PLACEMENT

Stereo

Before deciding where to place your Primus speakers, survey your room

and think about placement, using Figure 1 as a guide and keeping the

following points in mind:

For best results, place the speakers 6 to 8 feet (1.8 to 2.4 meters) •

apart.

Position each speaker so that the tweeter is approximately at ear level.•

Generally, bass output will increase as the speaker is moved closer to •

a wall or corner.

Refer to the “Home Theater”section on this page if you plan to use the •

speakers for home theater reproduction.

Couch/listening position

Stereo player

Right

channel

Left

channel

Figure 1. This overhead view shows a typical stereo-speaker plan.

Experiment with speaker placement to obtain the best bass level and stereo

imaging in your room.

Home Theater

For front-channel use, place one speaker on the left and another on

the right of the television monitor. Since the speakers are magnetically

shielded, you can place them without worrying about their distorting the

TV picture.

For surround-sound use, place the speakers alongside the listening

position. Final placement depends on room acoustics, availability of space

and your listening preference (Figures 2 and 3).

Place the center-channel speaker on top of or directly below the

television. Aim it toward the listening area.

NOTE: An Innity powered subwoofer will add impact and realism to bo

music and lm soundtracks. Contact your Innity dealer for recommendation

on subwoofer models.

Couch

Front

right

channel

Front

left

channel Center

channel

Surround

right

channel

Surround

left

channel

Infinity subwoofe

(optional)

Figure 2. This overhead view shows a typical home theater plan. The left/

right rear channels are for a seven-channel system. The center rear

channel is for a six-channel system.

Couch

Front

right

channel

Infinity subwoofer

(optional)

Front

left

channel

Center

channel Surround

right

channel

Surround

left

channel

Figure 3. This gure shows an alternate layout, which may be more

suitable for some rooms. The left/right rear channels are for a seven-

channel system. The center rear channel is for a six-channel system.

INFINITY PRIMUS SPEAKERS

WALL-MOUNTING THE P143, P153 AND

PC251

We have designed the P143, P153 and PC251 speakers to mount directly

onto a wall. Each speaker has two keyholes on the back and will require

two 1-1/2" (38mm), #10 wood screws fastened to a wall stud. If a wall

stud is unavailable, install an anchor appropriate for a 1-1/2", #10

screw.

NOTE: You are responsible for the correct selection and use of mounting

hardware (available through hardware stores) that will ensure the proper

and safe wall-mounting of the speakers.

Figure 4.

– +

Keyhole mounts

1/4" - 20 threaded inse

(P143 only)

Step 1.

Mark the positions on the wall where you would like to place the mounting

screws.

Step 2.

Fasten two 1-1/2", #10 wood screws to the wall using the markings

from Step 1 as your guide. Leave an 11/16" (17.5mm) space between the

wall

and screwhead. If a wall stud is not available, use an appropriate anchor.

Step 3.

Place the speaker on the wall by aligning the keyholes on the back of the

speaker to the screwheads on the wall. Once positioned properly, the

speaker should slide down slightly and become secure.

The P143 also allows you to use third-party wall brackets using the

1/4"-20 threaded insert located beneath the keyhole mount. Consult the

wall-bracket manufacturer to select the proper bracket.

CHANGING THE P253 AND P363 FEET

The P253 and P363 feature attractive outboard feet, installed at the

factory. However, if you would like to replace them with the less visible

inboard feet (included), follow the instructions below.

Remove the four feet on the bottom of the speaker by loosening the 1.

screw in each foot. Keep the screws for later use.

Remove the rubber plug from each inner hole (and save it for possible 2.

future use).

Attach the black inboard feet to the inner holes from which you just 3.

removed the rubber plugs. Use the same screws that you just removed.

Tighten the screws securely, using a handheld Phillips (+ tip) 4.

screwdriver. use a powered screwdriver of any type.Do not

CAUTION: Floorstanding (tower) loudspeakers have a high center of

gravity and may become unstable and tip over during earthquakes or if

they are rocked, tipped or improperly positioned. Consider anchoring

these speakers to the wall behind them, using the procedures and

hardware customary for anchoring bookcases and wall units. You are

responsible for proper installation and proper selection of hardware.

Product specificaties

Merk:	Newland
Categorie:	Barcode lezer
Model:	HR1550-30
Kleur van het product:	Zwart
Gewicht:	152 g
Breedte:	73 mm
Diepte:	113.5 mm
Hoogte:	159 mm
Soort:	Draagbare streepjescodelezer
Internationale veiligheidscode (IP):	IP54
Connectiviteitstechnologie:	Bedraad
Type stroombron:	USB
Waarschuwingssignaal:	Ja
Certificering:	FCC Part15 Class B, CE EMC Class B, CCC
USB-versie:	1.1
Type beeldsensor:	CCD
Temperatuur bij opslag:	-20 - 60 °C
Ondersteunde streepjescodes (1D):	Codabar, Code 128, Code 39, Code 93, EAN-13, EAN-8, GS1 DataBar Expanded, GS1-128 (UCC/EAN-128), Interleaved 2 of 5, PDF417
Standaard interfaces:	USB, RS-232, PS/2
Soort scanner:	1D/2D
Bedrijfstemperatuur (T-T):	-10 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
2D ( matrix en gestapeld ) barcodes ondersteund:	MicroPDF417, PDF417