Neumann LH 47 Handleiding

Neumann luidsprekersteun LH 47

Lees hieronder de 📖 handleiding in het Nederlandse voor Neumann LH 47 (2 pagina's) in de categorie luidsprekersteun. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

LH 47 Mounting manual

Important safety and mounting instructions

• Have the product mounted by a specialist.

• Due to his/her technical training, know-how and experience as well

as knowledge of relevant provisions, regulations and standards, the

specialist must be able to assess assigned tasks, recognize poten-

tial hazards and ensure appropriate safety measures. The following

safety and mounting instructions are addressed to this specialist.

•

Read and follow the safety and mounting instructions, keep these

instructions and always include them when passing the LH 47 on

to third parties.

•

Also read and follow the installation instructions contained in the

operating manual of the mounted loudspeaker.

• -When mounting, observe and follow the local, national and interna

tional regulations and standards.

•

Only mount loudspeakers in combination with other accessories from

the Neumann mounting hardware range to the LH 47 (see below).

•

Only mount one loudspeaker with a maximum weight of 65 kg

(143.3 lbs) to the LH 47.

•

Do not install the LH 47 in locations where it is exposed to externally

generated vibrations.

• Always use the original supplied parts.

In the following you will be asked to combine other acces-

sories from the Neumann mounting hardware range with the

LH 47. Download the PDF file Hardware Mounting Matrix“ ”

from www.neumann.com. Only combine the Neumann moun-

ting hardware as specified in the Hardware Mounting Matrix“ ”.

•

First attach a Neumann mounting hardware that features a cylinder-

shaped holder (e.g. LH 43, 45, 46) to a vertical or horizontal surface.

Follow the safety and mounting instructions contained in the operat-

ing manual of the selected mounting hardware.

Horizontal surfaces must be able to carry the weight of all parts

used plus the weight of the loudspeaker. With vertical surfaces,

you additionally have to consider the leverage.

•

Fasten your loudspeaker to a Neumann mounting hardware that is

also suitable for mounting to the LH47 (e.g. LH25, LH 42, 61, refer LH

to the Hardware Mounting Matrix ). Follow the safety and mount“ ” -

ing instructions contained in the operating manual of the selected

mounting hardware.

•

Next attach the LH 47 to the mounting hardware/loudspeaker

combination (see fi . 1).

–

If di erent mounting positions are possible, choose mounting

points that minimize leverage when the loudspeaker is tilted.

– Tighten the nuts with a torque of 2 m.0N

•

Now mount the LH 47 onto the cylinder-shaped holder F of the

Neumann mounting hardware. To do so, proceed as shown in fi .2.

CAUTION!

Danger of injury and material damage

due to dropping of the loudspeaker

Unless the LH 47 is properly fastened to the cylinder-shaped

holder, the loudspeaker together with the mounting hardware

can drop down.

XHave the loudspeaker held by a second specialist who is

physically able to do so. The requirements mentioned ear-

lier also apply to this specialist.

XWhen mounting the loudspeaker, provide a sufficien addi-

tional protection against dropping.

– Position the locking ring of the cylinder-shaped holder in the

upper position and tighten the 4 Allen screws so that the locking

ring cannot work loose and fall o .

– Place the LH 47 onto the cylinder-shaped holder F as shown in

 gs. 2, 3 and 4.

– Loosen th llen screws of the locking ring (see  g. 5a). e 4A

– Lower the locking ring into position (see  g 5b).

– Tighten the 4 Allen screws with a torque of 1 Nm. The LH 47 is 5

now properly fastened to the cylinder-shaped holder F.

•

Use safety wires to additionally protect the loudspeaker and the

mounting hardware against dropping. The safety wires, rope ter-

minations and coupling links must comply in their dimensioning

and condition with the regulations and standards of the country in

which they are used and must reliably prevent dropping of a load

of 65 kg (143.3 lbs).

• Make sure that ...

– you use both screws C to fasten the LH 47 to suitable Neumann

mounting hardware;

–

the surface to which you fasten the Neumann mounting hardware

cannot tip over or drop down;

–

the LH 47, the associated mounting hardware and the loudspeaker

cannot tip over or drop down, even if the power or audio cables

are pulled;

–

you check every 3 months if all screws are properly tightened and

if the LH 47 and associated mounting hardware, additional fasten-

ing elements, as well as the loudspeaker are in proper condition.

In case of any damage or any deviation from the safety and mounting

instructions, immediately dismount the loudspeaker, the LH 47 and

the additional mounting hardware used.

Delivery includes

A: 1 x LH 47 mounting

adapter plate

B: 4 x washers

C: 2 x M8x25 screws

D: 2 x lock washers

E: 2 x M8 nuts

Specification

Weight 250 g (0.6 lbs)

Dimensions 16 x 145 x 80 mm

(H x W x D)

x 5 x 3 ⅝”¾”⅛”

(H x W x D)

Max. load 65 kg (143.3 lbs)

Guarantee

For the current terms and conditions of the product guarantee please

visit www.neumann.com.

GEORG NEUMANN GMBH · LEIPZIGER STR. 112 · 10117 BERLIN · GERMANY 10/15 · 544942/ A02

TEL +49 (0)30 / 41 77 24-0 · FAX -50 · HEADOFFICE@NEUMANN.COM · WWW.NEUMANN.COM

Mounting Adapter Plate

4 5

15 Nm

20 Nm

Example:

LH25

Product specificaties

Merk:	Neumann
Categorie:	luidsprekersteun
Model:	LH 47
Kleur van het product:	Zwart
Gewicht:	250 g
Breedte:	145 mm
Diepte:	80 mm
Hoogte (max):	16 mm
Plaatsing:	Plafond
Aantal per verpakking:	1 stuk(s)
Compatibiliteit:	Neumann LH 43, LH 45 or LH 46 with LH 12, LH 15, LH 25, LH 26, LH 28, LH 29, LH 38, LH 45, LH 61 and LH 80.
Maximum gewicht:	65 kg