Netgear ProSafe AXM761 Handleiding

Netgear Niet gecategoriseerd ProSafe AXM761

Lees hieronder de 📖 handleiding in het Nederlandse voor Netgear ProSafe AXM761 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
)NSTALLATION'UIDE
e
ProSafe 10 Gigabit Ethernet SFP+ Module AXM761
Install Your Optical Module
The 10 Gigabit small form-factor pluggable (SFP+) module provides a full-duplex 10G bps
each direction for Ethernet operation on NETGEAR managed switches.
The switch will automatically detect the AXM761, so you can simply plug it into an
available module slot.
The module can be inserted or removed while the switch is operational.
AXM761
Installing a AXM761 Module
Insert the module firmly into the slot that supports the SFP+ interface. Make sure the optical
cable you use is multi mode LC to LC duplex cable.
Removing a AXM761 Module
Release the module latch by pulling down the handle bar across the module, and pull the
module out of the module slot.
Technical Specifications
Standards IEEE 802.3ae 10GBase-SR
Wavelength 850nm
Dimensions (HxWxD) 0.46” x 0.53” x 2.19”
(11.9 mm x 13.7 mm x 55.7 mm)
Weight 17.1g
Operating Temperature 32 -158Âș F (0 - 70ÂșC)
Storage Temperature 32 -185 ÂșF (0 - 85ÂșC)
Operative relative humidity 85% @ (25ÂșC)
Operating Distance 2 - 300 m for 50/125 um MMF
2 - 33 m for 62.5/125 um MMF
Connectors LC
Power Consumption <1.0w
MTBF 4,986,536 hr (569 years)
Safety Certification UL 1950 CSA 22.2 No. 950
Environmental Compliance -RoHS
AXM761_IG_10July09.fm Page 1 Friday, July 10, 2009 2:36 PM
July 2009
This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste
Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union,
this product should be treated and recycled in accordance with the laws of your jurisdiction implementing
the WEEE Directive.
© 2009 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of
NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or
registered trademarks of their respective holders. Information is subject to change without notice.
Technical Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label of your product and use it
to register your product at . Registration is required http://www.NETGEAR.com/register
before you can use our telephone support service. Registration via our web site is strongly
recommended.
Go to for product updates and Web supporthttp://kbserver.netgear.com . For Warranty and
Regional Customer Support information, see the that came with your Warranty Card
product.
Regulatory Compliance
Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability,
NETGEAR reserves the right to change the product described in this document without
notice. NETGEAR does not assume any liability that may accrue due to the use or
application of the product(s) or circuit layout(s) described herein.
Certificate of Manufacture/Importer
It is hereby certified the NETGEAR model AXM761 has been suppressed in accordance
with the condition set out in MBPT-Amtsb|Vfg 243/1991 and vfg 46/1992. The operation of
some equipment (for example, test transmitters) in accordance with regulation may,
however, be subject to certain restrictions. Please refer to the note in the operating
instructions. Federal Office for Telecommunications Approvals has been notified of the
placing of this equipment on the market and has been granted the right to test the series for
compliance with regulation.
Note: This device has been tested and found to comply with limits for a Class B digital
device, pursuant to part 15 of FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a commercial installation.
Laser Safety Warning
This is a Class 1 laser product.
Warning: Because invisible laser radiation may be emitted from aperture of the port when
no fiber cable is connected, avoid exposure to laser radiation and do not stare into
the open aperture.
AXM761_IG_10July09.fm Page 2 Friday, July 10, 2009 2:36 PM


Product specificaties

Merk: Netgear
Categorie: Niet gecategoriseerd
Model: ProSafe AXM761

Heb je hulp nodig?

Als je hulp nodig hebt met Netgear ProSafe AXM761 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Netgear

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd