Netgear PA101 Handleiding

Netgear Telefoon PA101

Lees hieronder de 📖 handleiding in het Nederlandse voor Netgear PA101 (2 pagina's) in de categorie Telefoon. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

PC*

Phone line behind the wall

RJ-11

connectors

PC with network

card installed

Telephone

(optional)

PA101 Phoneline10X USB adapter

Cable/ADSL

modem

*PC with FA310 Ethernet PCI card installed to interface

with the Cable or ADSL modem

START HERE

This guide provides instructions to install the Model PA101

Phoneline10X USB Adapter, using Windows®98.

The following six easy steps are provided in this guide for installing

your Phoneline10X USB Adapter:

1. Verify Package Contents

2. Install the Model PA101 Phoneline10X USB Adapter

3. Connect the Telephone Cables

4. Install the Network Driver

5. Install the FirstGear Software

6. Access the Network Printer

As a final step, be sure to register your NETGEAR™product at the

www.NETGEAR.com address.

VERIFY PACKAGE CONTENTS

Unpack the package contents and verify that you have the following:

Verify PC Requirements

The instructions given in this guide are for using the Phoneline10X

USB Adapter in a PC that has Microsoft®Windows 98.

INSTALL THE ADAPTER

To install the Phoneline10X USB Adapter:

1. Insert the Phoneline10X USB Adapter into the USB

(universal serial bus) as shown in the illustration.

Some PCs have two USB ports.The Phoneline10X USB

Adapter can be inserted into either port.

2. Turn on power to the PC, if you have chosen to install the

adapter with the power turned off.

CONNECT THE TELEPHONE CABLES

Using the telephone cable provided in the NETGEAR package,

connect one end of the telephone cable to the port labeled

“WALL”on the adapter and the other end of the cable to an

available wall jack, as illustrated above.

Using the cable shipped with your telephone or modem, connect

that cable to the port labeled “PHONE”on the adapter.

For External Modem

If you are using an external analog modem to connect to the

Internet, refer to the following illustration that shows the connec-

tions for the wall jack, Phoneline10X USB Adapter, external

modem, and phone. Note that the captions on the USB adapter,

and modem direct you to the outlets where you connect

the cables.

For Internal Modem

The illustration below depicts the configuration with an internal

modem and shows a closeup of the connections for the wall jack,

modem adapter, Phoneline10X USB Adapter, and phone. Note that

the caption on the modem adapter and USB adapter direct you to

the outlets where you connect the cable from the wall jack and the

cable that connects to the phone.

Note: For optimal performance, the Phoneline10X USB

Adapter should be plugged directly into a wall jack, and the

modem should be plugged directly into the USB adapter.

For Cable or ADSL Modem

If you are using a cable or ADSL modem to connect to the Internet,

refer to the following illustration that shows the connections for

the wall jack, Phoneline 10X USB Adapter, and the cable/ADSL

modem. Note the captions on the USB adapter direct you to the

outlets where you connect the cables.

INSTALL THE NETWORK DRIVER

This guide provides instructions for installing the Windows

Network Driver.The steps given are for users of Windows 98.

However, because all versions of Windows 98 might not respond

the same, windows that are different from those shown in these

instructions might open but prompt you for the same information,

or windows might open in a different order than shown in these

instructions.

Note: You must install the USB adapter before installing

the network driver.You need to have the Windows 98 CD and

the NETGEAR Phoneline10X Resource CD ready to use in

the installation process.

If you have not yet named your PC and your network, before you

proceed with the installation steps, decide on a name for your

network and for each PC.You will be using these names in the

section, “Install the FirstGear Software.”

Note: If the Insert CD window opens and the “Please insert

the CD labeled Windows message appears at any time during”

the installation process, insert the Windows CD and click

OK.Then proceed with the following steps.

To install the network driver:

1. Turn on the power to the computer to start Windows 98,

if you have chosen to install the adapter with the power

turned off.

Click Next to continue.

Select “Search for best driver for your device”.

Click Next to continue.

Insert the NETGEAR Phoneline10X Resource CD.

Make sure the CD Rom drive check box is selected and

click Next.

Windows is now ready to load the drivers. Click Next to start

copying the drivers.

Click Finish. It may take several minutes for the operating

system to complete the driver installation.

Click Yes to restart the computer. If the System Settings

Change window does not open, restart your PC by using the

Start menu; select Shut down, click Restart your computer,

and then click Yes.

10X

Phoneline Home Network

U S B A D A P T E R

Installation Guide

™

N E T G E A R

NETGEAR, Inc.

4401 Great America Parkway

Santa Clara, CA 95054 USA

Phone: 888-NETGEAR

http://WWW.NETGEAR.com

™

N E T G E A R

Phoneline10X USB Adapter

Telephone cable (10ft)

Resource CD

Installation Guide

Phoneline10X

USB Adapter

Phone

Telephone

wall jack PC

Telephone wire

Serial cable PhoneExternal modem

Telephone

wall jack

Phoneline10X USB adapter

PC with internal modem

USB Port

PC with PA101 Phoneline10X

USB adapter installed

Phone line

behind the wall

RJ-11

connectors

PA101 Phoneline 10X

USB adapter

Printer (optional)

Telephone

(optional)

Laptop

PA101QCard_eng_r2.qxd4 12/15/00 12:59 PM Page 1

NETGEAR, Inc.

4401 Great America Parkway

Santa Clara, CA 95054 USA

Phone: 888-NETGEAR

http://WWW.NETGEAR.com

Support Information

Phone:

Australia: 1 800-142-046 Korea: 0308-11-0319

Austria: 00800-06384327 New Zealand: 0800-444-626

France: 0800-90-2078 Sweden: 020-79008

Germany: 00800-06384327 Switzerland: 00800-06384327

Japan: 0120-66-5402 United Kingdom: (44) 171-571-5120

Holland: 00800-023-0981 U.S. / Canada: 800-211-2069

Internet / World Wide Web

Go to http://www.NETGEAR.com for the NETGEAR Web page.

Defective or damaged merchandise can be returned to your point-of-sale representative. For more information about customer suppo rt and

technical specifications, refer to the NETGEAR Web site: http://www.NETGEAR.com/

Trademarks

NETGEAR™is a trademark of NETGEAR Inc. Other brand and product names are trademarks or registered trademarks of their respective

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the

products described in this document without notice.

NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s)

described herein.

Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice

Note: Modifications to this device change it from the original state it was in when tested and may alter the device so that it no

longer complies with FCC testing limitations for Class B digital devices. According to FCC regulations, the user could be

prohibited from operating this equipment if it is modified.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential

installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 68 of the FCC Rules. All direct connections to telephone network lines must be made using

standard plugs and jacks compliant with FCC Part 68.

IMPORTANT!

Please register online.YOU MUST REGISTER TO OBTAIN TECHNICAL SUPPORT. PLEASE RETAIN PROOF OF PURCHASE and this

warranty information. To get product support, or to obtain product information and NETGEAR product documentation, direct your Web

browser to the http://www.NETGEAR.com Web page.

To register online, direct your Web browser to the http://www.gearguy.com/pub/registration Web page. If you do not have access to the

World Wide Web, you can print a registration card and mail it to NETGEAR customer service.The card is included on your Drivers and

Diagnostics disk as a Microsoft Word document file called register.doc. Download the file, print the form, and fill in the information.

Then mail the completed form to:

NETGEAR, Inc.

P.O. Box 58185

Santa Clara, CA 95052-9912

INSTALL THE FIRSTGEAR SOFTWARE

After the system restarts, be sure that the NETGEAR

Phoneline10X Resource CD is inserted in your CD drive.

Note: If you have an Ethernet adapter installed, you can use

the adapter to share an Internet connection. Connect the

Ethernet adapter to a cable modem, ADSL modem, or

router. However, if the adapter is connected to an Ethernet

network, instead of a modem or router, you will not be able

to share files and printers between the Phoneline network

and the Ethernet network.

After the system restarts, be sure that the NETGEAR

Phoneline10X Resource CD is inserted in your CD drive.

To install the FirstGear software:

1. Once the system reboots, FirstGear Installation will launch

automatically. If you wish to launch the installation manually,

go to the Start menu and section Run. At the prompt, type

the following: D:\setup.exe (“D:”represents the CD drive

letter), and click OK to open the Welcome window.

FirstGear™software verifies that all the necessary Windows

network services are installed. If any of the services are

missing, FirstGear installs them. FirstGear also helps you to

setup the network, share files, printers, and the Internet. If

there are any services to be installed, the following FirstGear

Network Services Installed window opens:

Click OK to restart your PC.

When the PC restarts, the Welcome page opens.

Click Next and follow the step by step instructions presented

on screen.

ACCESS THE NETWORK PRINTER

The following steps should be applied when you wish to share a

printer attached to another PC.The other PC must already have a

Phoneline10X PCI and USB adapter installed and connected to

the network.

To install the network printer:

1. For each PC that is to make use of the shared printer,

double-click on the NETGEAR Network Configuration icon

on your desktop to open the FirstGear-Install Network

Printer window.

Click Add Network Printer to open the Browse for

Printer window.

Choose the PC that you set up earlier to share printers.

4. Select a network printer.

5. Follow the instructions in the subsequent Windows screens.

Declaration of Conformity

Model PA101 Phoneline 10X USB Adapter

FOR HOME OR OFFICE USE

Tested to comply

with FCC Standards

TROUBLESHOOTING

PA101 is not recognized by Windows

1. Make sure that the PA101 is plugged securely into the USB

port of the PC and the USB Power LED is ON.

2. The PC must be running Windows 98 or Windows 2000.

3. Make sure that the USB ports and Plug & Play are enabled

in the BIOS.

Link LED is not ON

1. Make sure that the telephone cable is connected between the

PA101 Wall“ ” port and the telephone wall jack.

2. Make sure there is at least one other PC ON and connected

to the network.

Unable to see other computers in Network Neighborhood

1. Make sure that other PC’s are ON and connected to

the network.

2. Make sure that the “ ”Link LED is on all Phoneline10X

adapters (PCI or USB).

3. Make sure you have run FirstGear on each PC.

Unable to connect to the Internet

1. Make sure that PC, that is the Internet Gateway, is ON.

2. Make sure that the Modem is ON.

3. Check to make sure your Internet service provider is

not down.

4. Make sure the FirstGear Internet Sharing Software is installed

on the PC which is to act as a gateway to the Internet.

Unable to see a network printer

1. Make sure the Printer, as well as the PC it is attached to is

turned on.

2. Make sure the printer is designated to be shared in FirstGear.

3. Make sure that the PC, attached to the printer, has a

Phoneline10X PCI or USB adapter.

4. Make sure the link LED is on.

Unable to access the printer over the network

Note: Some older printers may require the printer drivers to be

upgraded before the printer can be accessed over the network.

1. Upgrade the printer drives by downloading them from the

manufacturer’s web site.

2. Follow the steps described in the section “Access the

Network Printer.”

Unable to launch AOL from all the PCs on the network

Note: FirstGear will automatically launch AOL on the PC connect-

ed directly to the Internet through a modem. All other PC s must’

launch a browser (Microsoft Explorer or Netscape Navigator)

instead of AOL, to access the Internet through the AOL connection.

1. Make sure the FirstGear Internet Sharing software is

installed on the PC which is to act as a gateway to

the Internet.

2. Make sure all other PCs are on and connected to the network.

3. Make sure the link LED is on.

4. Launch a browser from a PC other than the one designated

as the “Internet gateway.”This should cause the “Internet

gateway”PC to connect to AOL.

How can I change my Internet sharing settings?

1. Double-click on the FirstGear icon in the Windows System

Tray at the lower right hand corner.

How can I change my Network settings?

1. Double-click on the FirstGear Network configuration icon

on the desktop.

TECHNICAL SPECIFICATIONS

PHONELINE10X USB ADAPTER

Standards Compatibility

Compatible with HPNA 1.0 and HPNA 2.0

Supports Microsoft Windows 98

PCI 2.2 Plug and Play compatible

DC Operating Voltage

+5V + / - 5% @ 400 mA maximum

Physical Specifications

Dimensions: 4.75 x 2.875 in. (12 x 7.1 cm)

Weight: 0.22 lb (100 g)

Environmental Specifications

Operating temperature: 0 to 55° ° C

Operating humidity: 10% to 90% noncondensing

Agency Compliance

FCC, Part 15, Class B, Part 68

Interface Options

Dual RJ-11 connector for connecting telephones and PCs

LEDs

1 green (ACT) Activity LED

1 green LINK LED

1 green USB Power LED

™

N E T G E A R

PA101QCard_eng_r2.qxd4 12/15/00 12:59 PM Page 2

Product specificaties

Merk:	Netgear
Categorie:	Telefoon
Model:	PA101

Heb je hulp nodig?

Als je hulp nodig hebt met Netgear PA101 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Telefoon Netgear

Netgear PA301 Handleiding

16 Maart 2023

Netgear PA101 Handleiding

29 Januari 2023

Handleiding Telefoon

Nieuwste handleidingen voor Telefoon

EMeet OfficeCore M2 Handleiding

19 November 2024

Geemarc Serenties Handleiding

17 November 2024

Auerswald COMpact 4000 Handleiding

17 November 2024

Auerswald COMfortel 1200 Handleiding

17 November 2024

Akuvox MD12 Handleiding

17 November 2024

MyPhone Metro+ Handleiding

16 November 2024

Ranex RX 6023 Handleiding

16 November 2024

SPC AIR Handleiding

16 November 2024

Pixel M80 Handleiding

16 November 2024

Pixel Voical Air 2 Handleiding

16 November 2024