Netgear GS608 Handleiding

Netgear Niet gecategoriseerd GS608

Lees hieronder de 📖 handleiding in het Nederlandse voor Netgear GS608 (12 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 170 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

Installation Guide

Gigabit Ethernet Switch

10/100/1000 Mbps GS605 / GS608

Unpack the Box and Verify the Contents

When you open the box, verify that you received everything. The package includes:

• 5/8-port Gigabit Ethernet Switch GS605/GS608

• Power adapter

• Vertical stand

• Installation guide

• Warranty/Support information card

Prepare to Install the Switch

Decide where you want to place the switch. Find a flat horizontal surface — such as a table,

desk or shelf.

Make sure the selected location is:

• Not in direct sunlight or near a heater or heating vent.

• Not cluttered or crowded. There should be at least 2 inches (5 cm) of clear space on all

sides of the switch.

Introduction

The NETGEAR®5/8-Port Gigabit Ethernet Switch Model GS605 / GS608 provides you with

a high-speed, reliable, easy-to-use switch to connect up to five or eight different Ethernet

enabled devices (such as computers, file servers, print servers, printers, routers and hubs).

You use the GS605 / GS608 switch to build a small network that enables you to have 10

Mbps, 100 Mbps and 1000 Mbps connections to other devices on the network. Using Gigabit

Ethernet (1000 Mbps), you will be sending files across your network at speeds up to 2,000

Mbps due to the full-dulpex nature of Gigabit Ethernet. This enables you to move large

amounts of data up to 10 times faster than a Fast Ethernet switch. Also, with this switch, you

can add extra computers to your cable or DSL router.

Ethernet cables come as either straight-through or crossover cables—depending on whether

you’re connecting to a device (computer, server, or printer) or networking equipment (hub,

switch, or router). With the Auto Uplink™ feature, you don’t have to worry about which one

you use. Each port on the GS605/GS608 switch automatically configures itself correctly when

you plug in a device’s cable.

Installation Overview

Estimated Time: 5–10 minutes

1. Unpack the box and verify the contents.

2. Prepare to install the switch.

3. Install the switch and connect the other devices.

Installation guide, Warranty/

Support information card Power adapter

Gigabit Ethernet Switch GS605/GS608

Vertical stand

Gigabit Ethernet Switch GS605 / GS608

Product specificaties

Merk:	Netgear
Categorie:	Niet gecategoriseerd
Model:	GS608
Kleur van het product:	Wit
Gewicht:	160 g
Breedte:	165 mm
Diepte:	93 mm
Hoogte:	30 mm
Geluidsniveau:	0 dB
Materiaal behuizing:	Kunststof
LED-indicatoren:	Ja
Vermogensverbruik (max):	3.52 W
Plug and play:	Ja
Netwerkstandaard:	IEEE 802.1p, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3i, IEEE 802.3u
Temperatuur bij opslag:	-20 - 70 °C
Aantal ventilatoren:	0 ventilator(en)
Luchtvochtigheid bij opslag:	5 - 95 procent
Output current:	0.5 A
Spanning:	12 V
Elektromagnetische compatibiliteit:	Class B
Mean time between failures (MTBF):	1581380 uur
Ophangsysteem voor aan de muur:	Ja
Auto MDI/MDI-X:	Ja
Power over Ethernet (PoE):	Nee
Switchingcapaciteit:	16 Gbit/s
MAC-adrestabel:	8000 entries
10G support:	Nee
Switch type:	Unmanaged
Aantal basis-switching RJ-45 Ethernet-poorten:	8
Aantal Gigabit Ethernet (koper)-poorten:	8
Netstekker:	DC-in ingang
Type basis-switching RJ-45 Ethernet-poorten:	Gigabit Ethernet (10/100/1000)
Packet buffergeheugen:	1 MB
Jumbo Frames ondersteuning:	Ja
Warmtedissipatie:	12.01 BTU/h
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 90 procent
Jumbo frames:	9216
Kabellengtedetectie:	Ja