Netgear FS524 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Netgear FS524 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 175 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
524
516
NETGEAR, Inc.
4500 Great America Parkway
Santa Clara, CA 95054
USA
201-10137-01
Apr i l 2 0 04
users who are spread out over the network.
With both the Model FS516 switch and the Model FS524 switch,
improvement is accomplished very easily, with no change to the
desktop (the network interface cards or software and the network
wiring). As a result, the performance upgrade and the applications it
enables are obtained very quickly and at a low cost.
The Model FS516 and Model FS524 switches have the following
key features:
Sixteen (Model FS516) or twenty-four (Model FS524) automatic
speed-sensing (autosensing) 10/100 Mbps Ethernet ports to
provide fast information exchange, resource sharing, and client
or peer-to-peer communication using simple Category 5
unshielded twisted pair (UTP) cable
Automatic address learning function to build the packet-
forwarding information table
The table contains up to 4,000 MAC addresses; that is, the switch
can support networks with as many as 4,000 devices.
Autosensing full- or half-duplex mode, with N-way negotiation
Full-duplex mode doubles throughput of point-to-point
connections by letting individual ports transmit and receive
concurrently when the other end also supports full-duplex mode.
The default is half-duplex mode if the connected device does not
support autonegotiation.
Wire-speed filtering and forwarding to provide a "traffic cop"
function by directing traffic to the appropriate route without
slowing down the traffic
Store-and-forward forwarding node to minimize erroneous
packets on the network
Half-duplex back pressure
Easy Plug-and-Play installation with no software to configure,
which saves time and minimizes the potential for configuration
errors
Auto UplinkTM in all ports to make the right connection
Protocol independence and compatibility with all common
protocols such as TCP/IP, NetWare, DECnet, and Microsoft
Networks
Monitoring of individual port status by vista RJ-45 network ports
with built-in LEDs
Verify that your package contains the following:
Model FS516 or FS524 switch
Rubber footpads for desktop installation
Rack mount kit for 19-inch rack installation
Warranty / Support Information Card
Power cord
Front Panel
The front panel of the Model FS516/FS524 switch contains the fol-
lowing LEDs that correspond to each network port located on the
switch: Rx/Tx/Collision, Power, and 100 Mbps. Each vista RJ-45
network port has its own Link LED (located at the top left corner of
each 10/100 Mbps port) and full-duplex (FDX) LED (located at the
top right corner of each 10/100 Mbps port).
Installation guide,
Warranty / Support
information Card
Rack mount
kit
Product Illustration
Features
1
and transmits again after waiting a
specified time.
100 Mbps Green On The port is operating in 100 Mbps
mode.
Off The port is operating in 10 Mbps
mode.
Link Green On A valid link is established on the port.
Off A link is not established on the port.
FDX Green On The port is operating in full-duplex
mode.
Off The port is operating in half-duplex
mode.
RJ-45 Network Ports with Built-in LEDs
All ports on the switch are 10/100 Mbps capable autosensing Ethernet
ports. Each port supports only unshielded twisted pair (UTP) cable
using an 8-pin RJ-45 plug. Each port uses RJ-45 connectors that have
two LEDs-the Link LED and the FDX LED.
Applications
The Model FS516/FS524 switch is designed to provide flexibility in
configuring your network connections. Each switch can be used as a
standalone device or can be used with 10 Mbps or 100 Mbps hubs or
other interconnection devices in various configurations. The configu-
ration examples in this section illustrate the integration of the switch-
es in network environments of all sizes and types. These examples
include a network of a few workstations connected to a printer or a
segmented network with multiple users or workgroups and other net-
working devices.
Desktop Switching
The Model FS516/FS524 switch is used as a desktop switch to build a
small network that enables users to have 100 Mbps access to a file
server. If a full-duplex adapter card is installed in the server or PC, a
200 Mbps connection is possible on the port where the server or PC is
connected.
To install your switch on a flat surface, you do not need any special
tools. Be sure the switch is positioned with at least 2 inches of space
on all sides for ventilation.
To install the switch in a rack, first attach the mounting brackets to
the side of the switch. Insert the screws provided in the rack mount kit
through each bracket and into the bracket mounting holes in the
switch. Tighten the screws with a #1 Phillips screwdriver to secure
each bracket. Align the mounting holes in the brackets with the holes
in the rack and insert two pan-head screws with nylon washers
through each bracket and into the rack. Tighten the screws with a #2
Phillips screwdriver to secure the switch in the rack.
Before connecting the switch, be sure you review "Applications" for
information about determining the appropriate configuration for your
networking needs. Refer to the following steps and illustration when
connecting the switch. Each of the steps has a corresponding refer-
ence number in the illustration.
To connect devices to the switch:
1. Connect the devices to the 10/100 Mbps ports on the switch,
using Category 5 UTP cable and an RJ-45 plug.
Ventilation Minimum 2 inches (5.08 cm) on all sides for
cooling.
Adequate airflow in room or wiring closet.
Operating conditions At least 6 feet (1.83 m) to nearest source of
electromagnetic noise (such as photocopy
machine).
Power Adequate power source within 6 feet
(1.83 m).
Install the Switch
Connect the Devices
2
3
Note: Ethernet specifications limit the cable length between
your PC or server and the switch to 328 feet (100 meters) in
length.
2
100 Mbps
10 Mbps
Key
FVL328 ProSafeTM
High-Speed VPN
Firewall


Product specificaties

Merk: Netgear
Categorie: Niet gecategoriseerd
Model: FS524
Gewicht: 2600 g
Stroomvoorziening: 100 - 240V, 50/60 Hz
Connectiviteitstechnologie: Bedraad
Veiligheid: UL (UL 1950)/CUL, TUV (EN 60 950)
Power over Ethernet (PoE): Nee
Stapelbaar: Ja
Max. overdrachtssnelheid: 0.1 Gbit/s
MAC-adrestabel: 4000 entries
Switch type: Unmanaged
Aantal basis-switching RJ-45 Ethernet-poorten: 24
Afmetingen (B x D x H): 330 x 202 x 43 mm
Full duplex: Ja
Overdrachtssnelheid: 100 Mbit/s
Stroomverbruik (typisch): 30 W
Bedrijfstemperatuur (T-T): 0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V): 0 - 80 procent
Datalink-protocollen: Ethernet, Fast Ethernet
Wissel protocols: Ethernet
Latentie: 80 usec

Heb je hulp nodig?

Als je hulp nodig hebt met Netgear FS524 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Netgear

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd