Netgear FS105 Handleiding

Netgear Niet gecategoriseerd FS105

Lees hieronder de 📖 handleiding in het Nederlandse voor Netgear FS105 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 148 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

Installation Guide

Fast Ethernet Switch

10/100 Mbps FS105 v2/FS108 v2

Technical Support

PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT SHIPPED WITH

YOUR PRODUCT.

By registering your product at www.NETGEAR.com/register, we can provide you with faster

expert technical support and timely notices of product and software upgrades.

NETGEAR, INC.

Support Information

Phone: 1-888-NETGEAR (For US & Canada only) - 24 x7 phone support

See Support Information card for other countries.

E-mail: support@NETGEAR.com (24 x 7 online support)

www.NETGEAR.com

Everybody's Connecting are trademarks or registered trademarks of Netgear, Inc. in the

United States and/or other countries. Microsoft and Windows are registered trademarks of

Microsoft Corporation in the United States and/or other countries. Other brand and product

names are trademarks or registered trademarks of their respective holders. Information is

July 2004

2 0 1 - 1 0 2 4 9 - 0 1

Introduction

The NETGEAR®5/8-Port Fast Ethernet Switch Model FS105 v2/FS108 v2 provides you with

a low-cost, reliable, high-performance switch to connect up to five or eight different Ethernet-

enabled devices (such as computers, file servers, print servers, printers, routers and hubs).

You use the FS105 v2/FS108 v2 switch to build a small network that enables you to have 10

Mbps or 100 Mbps access to other devices on the network. Also, with this switch, you can add

extra computers to your cable or DSL router. Unlike a hub that shares its connection with all

devices, the FS105 v2/FS108 v2 switch provides a full, dedicated 100 Mbps (or 10 Mbps)

connection between two devices. If a device has full-duplex capability, the FS105 v2/FS108 v2

switch provides a 200 Mbps (or 20 Mbps) connection.

Ethernet cables come as either straight-through or crossover cables—depending on whether

you’re connecting to a device (computer, server, or printer) or networking equipment (hub,

switch, or router). With the Auto Uplink™ feature, you don’t have to worry about which one

you use. Each port on the FS105 v2/FS108 v2 switch automatically configures itself correctly

when you plug in a device’s cable.

If you have a problem with your switch, NETGEAR offers free support 24 hours a day and 7

days a week on the Web (www.NETGEAR.com), by e-mail (support@NETGEAR.com) and by

phone (see the provided support information card for phone numbers).

Installation Overview

Estimated Time: 5–10 minutes

1. Unpack the box and verify the contents.

2. Prepare to install the switch.

3. Install the switch and connect the other devices.

Fast Ethernet Switch FS105 v2/FS108 v2

MOD

105

Fast Ethern

et S

witch

DEL

FS108

Fast Ethernet S

witc

PWR

134576

FAST E TH

ERNET S WIT CH

FS108

=Link

Bl in

Act

00M10M

Auto 10/100 M

bps

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to

make changes to the product described in this document without notice.

NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit

layout(s) described herein.

Certificate of the Manufacturer/Importer

It is hereby certified that the NETGEAR Model FS105 v2/FS108 v2 Fast Ethernet Switch has been suppressed in

accordance with the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some

equipment (for example, test transmitters) in accordance with the regulations may, however, be subject to certain

restrictions. Please refer to the notes in the operating instructions.

Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market and

has been granted the right to test the series for compliance with the regulations.

Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.

• This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

EN 55 022 Declaration of Conformance

This is to certify that the NETGEAR Model FS105 v2/FS108 v2 Fast Ethernet Switch is shielded against the

generation of radio interference in accordance with the application of Council Directive 89/336/EEC, Article 4a.

Conformity is declared by the application of EN 55 022 Class B (CISPR 22).

Canadian Department of Communications Radio Interference Regulations

This digital apparatus (NETGEAR Model FS105 v2/FS108 v2 Fast Ethernet Switch) does not exceed the Class B

limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian

Department of Communications.

Règlement sur le brouillage radioélectrique du ministère des Communications

Cet appareil numérique (NETGEAR Model FS105 v2/FS108 v2 Fast Ethernet Switch) respecte les limites de bruits

radioélectriques visant les appareils numériques de classe B prescrites dans le Règlement sur le brouillage radioélectrique

du ministère des Communications du Canada.

Unpack the Box and Verify the

Contents

When you open the box, verify that you received everything. The package includes:

• 5/8-Port Fast Ethernet Switch FS105 v2/FS108 v2

• AC power adapter

• Wall-mounting screws

• FS105 v2/FS108 v2 Installation Guide (this document)

• Warranty and support information card

If you don’t have everything listed above, see the support information card for contact

information. If you’re missing the Technical Support information card itself, get contact

information at www.NETGEAR.com in the Customer Service area.

Installation guide,

warranty/registration card

and support

information card Power adapter

Fast Ethernet Switch FS105 v2/FS108 v2

OD EL

FS105

Fast Ethernet Switch

OD EL

FS108

Fast Ethernet Switch

PWR

13 4 57

T ETH ERNET S WIT CH

FS108

n= Link

Blin k= Ac t

100M 10M

Auto 10/100

Mbps

Wall-mount

hardware

1Prepare to Install the Switch

Decide where you want to place the switch. Find a flat horizontal surface — such as a table,

desk or shelf. The switch comes with wall-mounting screws. You’re welcome to use the screws if

you want to hang the switch in an open space on a wall.

Make sure the selected location is:

• Not in direct sunlight or near a heater or heating vent.

• Not cluttered or crowded. There should be at least 2 inches (5 cm) of clear space on all

sides of the switch.

• Well ventilated (especially if it is in a closet).

Also, you’ll need one Category 5 (Cat 5) Ethernet cable with RJ-45 connectors for each device

you want to connect to the switch. Each Ethernet cable must be less than 328 feet (100 meters).

Product specificaties

Merk:	Netgear
Categorie:	Niet gecategoriseerd
Model:	FS105
Gewicht:	280 g
Stroomvoorziening:	7.5VDC, 1A
Netwerkstandaard:	IEEE 802.3u, IEEE 802.3x
Aansluitingen:	5x 10/100 (RJ-45)
Temperatuur bij opslag:	-10 - 70 °C
Compatibele besturingssystemen:	Windows, Linux, Mac OS
Luchtvochtigheid bij opslag:	5 - 95 procent
Veiligheid:	UL 1950/cUL; IEC950/EN60950
Mean time between failures (MTBF):	390000 uur
Hoogte, in bedrijf:	0 - 3000 m
Hoogte bij opslag:	3000 m
Power over Ethernet (PoE):	Nee
Max. overdrachtssnelheid:	0.1 Gbit/s
Switchingcapaciteit:	1 Gbit/s
MAC-adrestabel:	1000 entries
Datastroombeheer:	Ja
Switch type:	Unmanaged
Aantal basis-switching RJ-45 Ethernet-poorten:	5
Afmetingen (B x D x H):	94 x 27 x 103 mm
Elektromagnetische emissie:	CE, FCC part 15 Class A; EN55 022 (CISPR22), Class A; VCCI Class A; C-Tick
Full duplex:	Ja
Koperen ethernetbekabelingstechnologie:	100Base-TX, 10Base-T
Overdrachtssnelheid:	10 Mbit/s
Stroomverbruik (typisch):	7.5 W
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent
Datalink-protocollen:	Fast Ethernet
Connectivity LEDs:	Ja
Latentie:	20 µs