Netgear AXM752 Handleiding

Netgear Niet gecategoriseerd AXM752

Lees hieronder de 📖 handleiding in het Nederlandse voor Netgear AXM752 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

)NSTALLATION'UIDE

The 10 Gigabit small form-factor pluggable (XFP) module provides one

full-duplex 10G bps Ethernet link operation on NETGEAR managed

switches.

Due to the automatic detection capability of the switch, installation of

AXM752 only requires that you plug the module into the module slot.

The module can be inserted or removed while the switch is operational.

Insert the module firmly into the slot that supports the XFP interface.

Make sure the optical cable you use is single mode LC to LC duplex

cable.

Release the module latch by pulling down the handle bar across the

module, and pull the module out of the module slot.

Specifications

Standard IEEE 802.3ae

10GBase LR

Dimensions (HxWxD) 0.33” x 0.72” x 3.07”

(85.mm x 18.35mm x 78.0 mm)

Weight 0.1 lb (47g)

Operating Temperature 32- 158 F (0-70c)

Storage Temperature 32-185 F (0-85c)

Operative relative humidity 6.23 mi (10km)

Operating Distance LC SM for 9um cable

Connectors LC SM for 9um cable

Power Consumption 2.1w (max: 2.5w)

MTBF 459656 hr (52 years)

Safety Certification UL 1950

CSA 22.2 No. 950

This symbol was placed in accordance with the European Union Directive

2002/96 on the Waste Electrical and Electronic Equipment (the WEEE

Directive). If disposed of within the European Union, this product should

be treated and recycled in accordance with the laws of your jurisdiction

implementing the WEEE Directive.

GEAR, Inc. in the United States and/or other countries. Other brand and product names are

trademarks or registered trademarks of their respective holders. Information is subject to change

without notice.

In the interest of improving internal design, operational function, and/or

reliability, NETGEAR reserves the right to change the product

described in this document without notice. NETGEAR does not assume

any liability that may accrue due to the use or application of the

product(s) or circuit layout(s) described herein.

It is hereby certified the NETGEAR model AXM752 has being suppressed

in accordance with the condition set out in MBPT-Amtsb|Vfg 243/1991 and

vfg 46/1992. The operation of some equipment (for example, test

transmitters) in accordance with regulation may, however, be subject to

certain restrictions. Please refer to the note in the operating instructions.

Federal Office for Telecommunications Approvals has being notified of the

placing of this equipment on the market and has being granted the right to

test the series for compliance with regulation.

Note: This device has being tested and found to comply with limits for a

Class B digital device, pursuant to part 15 of FCC rules. These limits are

designed to provide reasonable protection against harmful interference in a

commercial installation.

This is Class 1 laser product

Warning - Because invisible laser radiation may be emitted from aperture of

the port when no fiber cable is connected, avoid exposure to laser radiation

and do not stare into open aperture.

Product specificaties

Merk:	Netgear
Categorie:	Niet gecategoriseerd
Model:	AXM752
Voldoet aan industriestandaarden:	10GBASE-LR
Overdrachtssnelheid:	10 Gbit/s
Code geharmoniseerd systeem (HS):	85177900