Netgear AXM751 Handleiding

Netgear Niet gecategoriseerd AXM751

Lees hieronder de 📖 handleiding in het Nederlandse voor Netgear AXM751 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

)NSTALLATION'UIDE

The 10 Gigabit small form-factor pluggable (XFP) module provides a

full-duplex 10G bps Ethernet link on NETGEAR managed switches.

The switch will automatically detect the AXM751, so you can simply

plug it into an available module slot.

The module can be inserted or removed while the switch is operational.

Insert the module firmly into the slot that supports the XFP interface.

Make sure the optical cable you use is multi-mode LC to LC duplex

cable.

Release the module latch by pulling down the handle bar across the

module, and pull the module out of the module slot.

Specifications

Standard IEEE 802.3ae

10GBase LR

Dimensions (HxWxD) 0.33” x 0.72” x 3.07”

(8.5mm x 18.35mm x 78.0 mm)

Weight 0.1 lb (47g)

Operating Temperature 32- 158 F (0-70c)

Storage Temperature 32-185 F (0-85c)

Operative relative humidity 104 (40c) and 90%

Operating Distance 33m (62um OM1 cable)

82m (50um OM2 cable)

220m (50um OM3 cable)

Connectors LC MM for 62.5um fiber cable

LC MM for 50um fiber cable

Power Consumption 0.95w (max: 1.37w)

MTBF 1154739 hr (135 years)

Safety Certification UL 1950

CSA 22.2 No. 950

This symbol was placed in accordance with the European Union Directive

2002/96 on the Waste Electrical and Electronic Equipment (the WEEE

Directive). If disposed of within the European Union, this product should

be treated and recycled in accordance with the laws of your jurisdiction

implementing the WEEE Directive.

GEAR, Inc. in the United States and/or other countries. Other brand and product names are

trademarks or registered trademarks of their respective holders. Information is subject to change

without notice.

The regulatory compliance details are documented below.

Statement of Conditions

In the interest of improving internal design, operational function, and/or

reliability, NETGEAR reserves the right to change the product

described in this document without notice. NETGEAR does not assume

any liability that may accrue due to the use or application of the

product(s) or circuit layout(s) described herein.

Certificate of Manufacture/Importer

It is hereby certified the NETGEAR model AXM751 has being

suppressed in accordance with the condition set out in MBPT-

Amtsb|Vfg 243/1991 and vfg 46/1992. The operation of some

equipment (for example, test transmitters) in accordance with regulation

may, however, be subject to certain restrictions. Please refer to the note

in the operating instructions. Federal Office for Telecommunications

Approvals has being notified of the placing of this equipment on the

market and has being granted the right to test the series for compliance

with regulation.

Note: This device has being tested and found to comply with limits for a

Class B digital device, pursuant to part 15 of FCC rules. These limits

are designed to provide reasonable protection against harmful

interference in a commercial installation.

Laser Safety Warning

This is a Class 1 laser product.

Warning: Because invisible laser radiation may be emitted from aperture of

the port when no fiber cable is connected, avoid exposure to laser

radiation and do not stare into open aperture.

Product specificaties

Merk:	Netgear
Categorie:	Niet gecategoriseerd
Model:	AXM751
Voldoet aan industriestandaarden:	10GBASE-SR XFP
Overdrachtssnelheid:	10 Gbit/s
Code geharmoniseerd systeem (HS):	85177900