Netgear APS150W Handleiding

Netgear Niet gecategoriseerd APS150W

Lees hieronder de 📖 handleiding in het Nederlandse voor Netgear APS150W (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Installation Guide

Overview

The following table provides an overview of the power supply units (PSUs) for

managed switches and the models in which they are supported.

PSU Model Used in Switch

Model

APS150W M4300-28G

M4300-52G

APS250W M4300-8X8F

M4300-12X12F

M4300-24X24F

APS299W M4300-16X

APS550W M4300-28G-POE+

M4300-52G-POE+

APS600W M4300-96X

M4300-16X

APS750W M4500-32C

M4500-48XF8C

APS1000W M4300-28G-POE+

M4300-52G-POE+

M6100-3S

RPS4000v2

APS1200W M4300-96X

Install an additional power supply unit

In models with more than one power supply bay, you can install an additional

PSU.

1. Pull out the cover plate from the power module bay in which you want to

insert the additional PSU.

AC OK LED. All PSUs provide one AC OK

LED. During normal operation, this LED

lights green to indicate that the PSU is

receiving power.

DC OK LED. Model APS150W also provides

one DC OK LED. During normal operation,

this LED lights green to indicate that the DC

outputs are within regulation limits.

NETGEAR Power Supply Unit

for Managed Switches

APS150W, APS250W, APS299W, APS550W, APS600W,

APS750W, APS1000W, and APS1200W

Package contents

• Power supply unit

• Power cord (varies by region)

• Installation guide

2. Insert the additional PSU into the power module bay, and gently push the

PSU into the bay.

CAUTION: When inserting the PSU, do not use unnecessary force. Doing so

can damage the connectors on the back of the PSU and on the midplane.

3. Connect the end of the power cord to the power receptacle on the PSU.

4. Plug the AC power cord into a power source such as a wall socket or power

strip.

When you apply power, the AC OK LED on the PSU lights. The LED on the

switch for the power supply bay also lights. If these LEDs do not light, make

sure that the power cord is plugged in and that the power source is good.

Replace a power supply unit

In models with more than one PSU, the PSUs are hot-pluggable.

1. If your switch functions with a single PSU only, disconnect the power cord

from the PSU and let the switch power down.

If your switch functions with more than one PSU, you do not need to power

down the switch and you can perform a hot swap.

2. Remove the PSU from the power module bay by moving the orange release

latch to the left and pulling the extraction handle.

3. Insert the replacement PSU into the power module bay, and gently push the

PSU into the bay until the latch locks.

CAUTION: When inserting the PSU, do not use unnecessary force. Doing so

can damage the connectors on the back of the PSU and on the midplane.

4. Connect the end of the power cord to the power receptacle on the PSU.

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

NETGEAR INTERNATIONAL LTD

Floor 1, Building 3

University Technology Centre

Curraheen Road, Cork,

T12EF21, Ireland

are trademarks of NETGEAR, Inc. Any non‑NETGEAR

trademarks are used for reference purposes only.November 2019

5. Plug the AC power cord into a power source such as a wall socket or power

strip.

When you apply power, the AC OK LED on the PSU lights. The LED on the

switch for the power supply bay also lights. If these LEDs do not light, make

sure that the power cord is plugged in correctly and that the power source is

good.

Technical specications

Specications PSU

AC input • . 100–127VAC, 3A, 50–60 Hz or APS150W

200–240VAC, 1.5A, 50–60 Hz

• . 100–240VAC, 3.5–2A, 50–60 HzAPS250W

• . 100–240VAC, 5–2.5A, 50–60 HzAPS299W

• . 100–240VAC, 9–4A, 50–60 HzAPS550W

• . 90–132VAC, 8A, 47–63 Hz or APS600W

180–264VAC, 4A, 47–63 Hz

• . 100–240VAC, 10/5.36A max, 50–60 HzAPS750W

• . 100–127VAC, 9.9A, 50–60 Hz or APS1000W

200–240VAC, 7.8A, 50–60 Hz

• . 90–132VAC, 15A, 43–67 Hz or APS1200W

180–264VAC, 8A, 43–67Hz

DC output • . +12V, 12.5AAPS150W

• . +12V, 20A or +12 VSB 1AAPS250W

• . +54.5V, 5.51AAPS299W

• . +54V, 10.95A or +12 VSB 2.08AAPS550W

• . +54.5 VDC, 11AAPS600W

• . +12V, 61.5A or +12VSB 3AAPS750W

• . 56V, 12.12A or +12 VSB 1.8A (@ 100–127VAC) 56V, APS1000W

17.35A or +12 VSB 2.4A (@ 200–240VAC)

• . +54.5 VDC, 22A @ 230 VAC, or 18.35A @ 115 VACAPS1200W

Specications PSU

Dimensions

(H x W x D)

• . 1.5 x 2.0 x 7.3 in. (39 x 50.5 x 185 mm)APS150W

• . 1.5 x 2.9 x 7.3 in. (39 x 74 x 185 mm)APS250W

• . 1.5 x 2.9 x 7.6 in. (39 x 74 x 194 mm)APS299W

• APS550W, APS1000W. 1.6 x 3.6 x 8.7 in. (40 x 87 x 208 mm)

• APS600W, APS1200W. 1.6 x 2.9 x 7.3 in. (40 x 73 x 185mm)

• APS750W. 1.6 x 7.5 x 8.1 in. (40 x 192 x 206mm)

Operating

temperature

• . 32 to 122ºF (0 to 50ºC)APS250W

• APS150W, APS299W, APS550W, APS600W, APS1000W,

APS1200W. 23 to 122ºF (–5 to 50ºC)

• . 32 to 131ºF (0 to 55ºC)APS750W

Operating

relative

humidity

• . Up to 95% noncondensingAPS150W

• APS250W, APS299W, APS550W, APS600W, APS1000W,

APS1200W. 5% to 95% noncondensing

• . 10 to 90% noncondensingAPS750W

Operating

altitude level

• APS250W, APS550W, APS1000W. Up to 9,800 feet (3,000m)

above sea level

• APS150W , APS299W, APS600W, APS750W, APS1200W. Up to

16,000 feet (5,000m) above sea level

Storage

temperature

• APS150W, APS250W, APS299W. –40 to 158ºF (–40 to 70ºC)

• APS550W, APS600W, APS1000, APS1200W. –40 to 185ºF (–40

to 85ºC )

Storage

altitude level

Below 49,000 feet (15,000 m) above sea level

MTBF All models except APS750W . 4,534,733 hrs (~517 years) @ 77ºF

(25ºC)

APS750W only. 200,000 hrs (~23 years) @ 122ºF (50ºC)

Support

Thank you for purchasing this NETGEAR product. You can visit

https://www.netgear.com/support/ to register your product, get help, access the

latest downloads and user manuals, and join our community. We recommend

that you use only ofcial NETGEAR support resources.

Si ce produit est vendu au Canada, vous pouvez accéder à ce document en

français canadien à https://www.netgear.com/support/download/.

(If this product is sold in Canada, you can access this document in Canadian

French at https://www.netgear.com/support/download/.)

For regulatory compliance information including the EU Declaration of

Conformity, visit https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

Do not use this device outdoors. If you connect cables or devices that are

outdoors to this device, see https://kb.netgear.com/000057103 for safety and

warranty information.

Compliance

Safety IEC 60950-1, EN 60950-1, CB Certicate/Report, UL/CSA 60950-1

CE Low Voltage Directive 2006/95/EC (Europe)

CCC (China)

KC (Korea)

EMC CC / ICES-003 Emission (USA/Canada)

CRISP 22 Emission (International)

EN55022 Emission (Europe)

EN55024 Immunity (Europe)

EN61000-4-2 Electrostatic Discharge

EN61000-4-3 Radiated RFI Immunity

EN61000-4-4 Electrical Fast Transients level 4

EN61000-4-5 Electrical Surge Level

EN61000-4-6 RF Conducted

EN61000-4-8 Power Frequency Magnetic Fields

EN61000-4-11 Voltage Dips and Interruptions

EN61000-4-8 Power Frequency Magnetic Fields

EN61000-4-11 Voltage Dips and Interruptions

EN61000-3-2 Harmonics (Europe)

EN61000-3-3 Voltage Flicker (Europe)

Product specificaties

Merk:	Netgear
Categorie:	Niet gecategoriseerd
Model:	APS150W
Kleur van het product:	Grijs
Totaal vermogen:	150 W
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Type product:	Voeding