Neets SB1 Handleiding

Neets Soundbar SB1

Lees hieronder de 📖 handleiding in het Nederlandse voor Neets SB1 (16 pagina's) in de categorie Soundbar. Deze handleiding was nuttig voor 60 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

Manual Sound Bar - SB1

Installation Manual

Page 2 of 16

Foreword

This document describes how to install and operate the Neets Sound Bar - SB1.

material of Neets. All rights are reserved. No third party is allowed access to content,

information or data in this manual without Neets’ express written consent.

CHANGES - Neets reserve the right to change the specification and functions of this product

without prior notice.

Questions, AFTER reading this manual, can be addressed to the local distributor or:

Neets A/S

Langballe 4

8700 Horsens

Denmark

by E-Mail: Support@Neets.dk

or you may use our contact form at www.neets.dk

Revision list

This document has the following revision changes:

Author: Date Description Pages Rev

DB: 01-11-2017 First release All 1.00

What is in the box?

The box contain the following items:

• 1 x Neets – Sound Bar SB1

• 1 x Neets 24V/2.5A external power supply

• 1 x Power cable for power supply

• 2 x Terminal connectors

• 2 x Wall brackets

• 4 x M5 screws for wall brackets

• 4 x Rawlplugs

• 4 x Rubber feets

• 1 x Velcro set

DB: 13-11-2017

DB: 22-11-2017

Edits in chart

Edits to note

Paragraph removed

Edits to graphics

Section about Audio input settings removed

2.00

3.00

Page 3 of 16

Important Safety Instructions

Caution:

Read these instructions.

Read and understand all safety and operating instructions before using the equipment.

Keep these Instructions.

The safety instructions should be kept for future reference.

Heed all warnings.

Follow all warnings and instructions marked on the equipment or in the user information.

Avoid attachments.

Do not use tools or attachments that are not recommended, as they may be hazardous.

Warning!:

• This equipment should be operated only from the included power supply.

• To remove power from the equipment safely, remove all power cords from the rear of the equipment, or the

desktop power module (if detachable), or from the power source receptacle (wall plug).

• Power cords should be routed so that they are not likely to be stepped on or pinched by items placed upon or

against them.

• Do not defeat the safety purpose of a polarized or grounding-type plug. A polarized plug has two blades with one

wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the

third prong is provided for your safety. If the provided plug does not t into your outlet, consult an electrician for

replacement of the obsolete outlet.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualied service personnel. There are no user-serviceable parts inside. To prevent the risk of

shock, do not attempt to service this equipment yourself because opening or removing covers may expose you to

dangerous voltage or other hazards. Contact your local Neets reseller or distributor.

• If the equipment has slots or holes in the enclosure, these are provided to prevent overheating of sensitive

components inside. These openings must never be blocked by other objects.

• Do not use this equipment near water.

• To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture and objects lled

with liquids.

• Unplug the product before cleaning. Clean only with a dry cloth and not cleaning uid or aerosols. Such products

could enter the unit and cause damage, re, or electric shock. Some substances may also mar the nish of the

product.

FCC Class A Notice:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part

15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

The Class A limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case the user will be required to correct the interference at his own expense.

FCC regulations state that any unauthorized changes or modications to this equipment, not expressly approved by

the manufacturer, could void the user’s authority to operate this equipment.

The lightning bolt triangle is used to alert the user to the presence of uninsulated “dangerous

voltages” within the unit’s chassis that may be of sufcient magnitude to constitute a risk of electric

shock to humans.

The exclamation point triangle is used to alert the user to presence of important operating and

service instructions in the literature accompanying the product.

Product specificaties

Merk:	Neets
Categorie:	Soundbar
Model:	SB1
Kleur van het product:	Black, Grey
Breedte:	1018 mm
Diepte:	75 mm
Hoogte:	130 mm
Gewicht verpakking:	6500 g
Breedte verpakking:	1120 mm
Diepte verpakking:	150 mm
Hoogte verpakking:	200 mm
LED-indicatoren:	Ja
Aan/uitschakelaar:	Ja
Connectiviteitstechnologie:	Bedraad
Audio-ingang (L, R):	1
Gemiddeld vermogen:	- W
Stroomverbruik (in standby):	0.5 W
Certificering:	IEC 60958
FM-radio:	Nee
Aansluiting voor netstroomadapter:	Ja
RS-232:	Ja
Audio-uitgangskanalen:	2.0 kanalen
Frequentiebereik:	50 - 20000 Hz
Signaal/ruis-verhouding:	106 dB
Ophangsysteem voor aan de muur:	Ja
Soundbar speaker RMS vermogen:	20 W
Totale harmonische vervorming (THD):	0.1 procent
Meegeleverde subwoofer:	Nee
Meegeleverde ontvanger:	Nee
Digitale audio optische in:	1
Soundbar gewicht:	4500 g
Diameter woofer:	4 "
Aantal woofer drivers:	2
Diameter hogetonenluidspreker:	1 "
Aantal tweeter drivers:	2
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	50 W