Nec ST-EX2023 Handleiding

Nec Flat panel steun ST-EX2023

Lees hieronder de 📖 handleiding in het Nederlandse voor Nec ST-EX2023 (2 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

ST-EX2023 Installation Instructions / Instructions d'installation / Montageanweisung /Instrucciones de instalación /

Istruzioni di installazione / 取扱説明書 / 安装说明书

English

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

Français

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

Deutsch

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

Español

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

Italiano

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

日本語

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

简体中文

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

1234

AB

English

1

2 3

Français Deutsch

Installing stand:

You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)

by change attachment foot.

CAUTION: Do not use this stand for EX201W with attachment foot for

EX231W/EX231Wp. It may cause monitor fall down and make serious

damage to the monitor.

For EX201W user: Proceed to step 3.

For EX231W or EX231Wp user: Change attachment foot following the below

instruction.

1 Press Quick Release Button and pull out the attachment foot.A

2 Attach the attachment foot with "23 only".

3 1) Turn off the power to the monitor.

2) Paste two rubber feet on the bottom of the monitor.B

3) Place monitor face down on a non-abrasive surface.

NOTE: Handle with care when placing monitor face down to avoid

damaging the front control keys.Put the upper hooks of the stand in the

slot of the monitor then push stand into monitor in direction of the arrow

as shown and conrm that the stand is locked. Open the stand with

widely extended until feeling a "click" feeling.

To reattach the stand, please refer to monitor's user's manual.

Before using:

Use this stand with widely extended until feeling a "click" feeling.

CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.

Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.

Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.

For EX201W

For EX231W / EX231Wp

Unit: mm

Weight: ??

Weight: ??

Installing stand:

You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)

by change attachment foot.

CAUTION: Do not use this stand for EX201W with attachment foot for

EX231W/EX231Wp. It may cause monitor fall down and make serious

damage to the monitor.

For EX201W user: Proceed to step 3.

For EX231W or EX231Wp user: Change attachment foot following the below

instruction.

1 Press Quick Release Button and pull out the attachment foot.A

2 Attach the attachment foot with "23 only".

3 1) Turn off the power to the monitor.

2) Paste two rubber feet on the bottom of the monitor.B

3) Place monitor face down on a non-abrasive surface.

NOTE: Handle with care when placing monitor face down to avoid

damaging the front control keys.Put the upper hooks of the stand in the

slot of the monitor then push stand into monitor in direction of the arrow

as shown and conrm that the stand is locked. Open the stand with

widely extended until feeling a "click" feeling.

To reattach the stand, please refer to monitor's user's manual.

Before using:

Use this stand with widely extended until feeling a "click" feeling.

CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.

Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.

Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.

For EX201W

For EX231W / EX231Wp

Unité: mm

Poids: ??

Poids: ??

Installing stand:

You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)

by change attachment foot.

CAUTION: Do not use this stand for EX201W with attachment foot for

EX231W/EX231Wp. It may cause monitor fall down and make serious

damage to the monitor.

For EX201W user: Proceed to step 3.

For EX231W or EX231Wp user: Change attachment foot following the below

instruction.

1 Press Quick Release Button and pull out the attachment foot.A

2 Attach the attachment foot with "23 only".

3 1) Turn off the power to the monitor.

2) Paste two rubber feet on the bottom of the monitor.B

3) Place monitor face down on a non-abrasive surface.

NOTE: Handle with care when placing monitor face down to avoid

damaging the front control keys.Put the upper hooks of the stand in the

slot of the monitor then push stand into monitor in direction of the arrow

as shown and conrm that the stand is locked. Open the stand with

widely extended until feeling a "click" feeling.

To reattach the stand, please refer to monitor's user's manual.

Before using:

Use this stand with widely extended until feeling a "click" feeling.

CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.

Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.

Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.

For EX201W

For EX231W / EX231Wp

Einheit: mm

Gewicht: ??

Gewicht: ??

Español

日本語

Italiano

简体中文

Installing stand:

You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)

by change attachment foot.

CAUTION: Do not use this stand for EX201W with attachment foot for

EX231W/EX231Wp. It may cause monitor fall down and make serious

damage to the monitor.

For EX201W user: Proceed to step 3.

For EX231W or EX231Wp user: Change attachment foot following the below

instruction.

1 Press Quick Release Button and pull out the attachment foot.A

2 Attach the attachment foot with "23 only".

3 1) Turn off the power to the monitor.

2) Paste two rubber feet on the bottom of the monitor.B

3) Place monitor face down on a non-abrasive surface.

NOTE: Handle with care when placing monitor face down to avoid

damaging the front control keys.Put the upper hooks of the stand in the

slot of the monitor then push stand into monitor in direction of the arrow

as shown and conrm that the stand is locked. Open the stand with

widely extended until feeling a "click" feeling.

To reattach the stand, please refer to monitor's user's manual.

Before using:

Use this stand with widely extended until feeling a "click" feeling.

CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.

Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.

Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.

For EX201W

For EX231W / EX231Wp

Unidad: mm

Peso: ??

Peso: ??

For EX201W For EX231W / EX231Wp

Installing stand:

You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)

by change attachment foot.

CAUTION: Do not use this stand for EX201W with attachment foot for

EX231W/EX231Wp. It may cause monitor fall down and make serious

damage to the monitor.

For EX201W user: Proceed to step 3.

For EX231W or EX231Wp user: Change attachment foot following the below

instruction.

1 Press Quick Release Button and pull out the attachment foot.A

2 Attach the attachment foot with "23 only".

3 1) Turn off the power to the monitor.

2) Paste two rubber feet on the bottom of the monitor.B

3) Place monitor face down on a non-abrasive surface.

NOTE: Handle with care when placing monitor face down to avoid

damaging the front control keys.Put the upper hooks of the stand in the

slot of the monitor then push stand into monitor in direction of the arrow

as shown and conrm that the stand is locked. Open the stand with

widely extended until feeling a "click" feeling.

To reattach the stand, please refer to monitor's user's manual.

Before using:

Use this stand with widely extended until feeling a "click" feeling.

CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.

Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.

Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.

For EX201W

For EX231W / EX231Wp

Unità: mm

Peso: ??

Peso: ??

Installing stand:

You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)

by change attachment foot.

CAUTION: Do not use this stand for EX201W with attachment foot for

EX231W/EX231Wp. It may cause monitor fall down and make serious

damage to the monitor.

For EX201W user: Proceed to step 3.

For EX231W or EX231Wp user: Change attachment foot following the below

instruction.

1 Press Quick Release Button and pull out the attachment foot.A

2 Attach the attachment foot with "23 only".

3 1) Turn off the power to the monitor.

2) Paste two rubber feet on the bottom of the monitor.B

3) Place monitor face down on a non-abrasive surface.

NOTE: Handle with care when placing monitor face down to avoid

damaging the front control keys.Put the upper hooks of the stand in the

slot of the monitor then push stand into monitor in direction of the arrow

as shown and conrm that the stand is locked. Open the stand with

widely extended until feeling a "click" feeling.

To reattach the stand, please refer to monitor's user's manual.

Before using:

Use this stand with widely extended until feeling a "click" feeling.

CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.

Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.

Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.

For EX201W

For EX231W / EX231Wp

单位 : mm

重量 : ??

重量 : ??

Weight: ?? Weight: ??

単位 : mm

Product specificaties

Merk:	Nec
Categorie:	Flat panel steun
Model:	ST-EX2023

Heb je hulp nodig?

Als je hulp nodig hebt met Nec ST-EX2023 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Flat panel steun Nec

Nec PD01CMS Handleiding

21 Mei 2023

Nec 100013263 Handleiding

2 Mei 2023

Nec 40000679 Handleiding

29 April 2023

Nec PDVWXUN 55 L Handleiding

14 April 2023

Nec 40000676 Handleiding

11 April 2023

Nec WS32-55P Handleiding

4 April 2023

Nec PDWXS 46-55 L Handleiding

26 Maart 2023

Nec ST-4020 Handleiding

24 Maart 2023

Nec 40000680 Handleiding

8 Maart 2023

Nec W32-70 Handleiding

4 Maart 2023

Handleiding Flat panel steun

Nieuwste handleidingen voor Flat panel steun

Peerless-AV HPF665 Handleiding

18 December 2024

Alogic Glide C32GMA2 Handleiding

18 December 2024

NeoMounts FPMA-D750WHITE2 Handleiding

17 December 2024

NeoMounts FPMA-D750SILVER Handleiding

17 December 2024

NeoMounts FPMA-D750WHITE Handleiding

17 December 2024

NeoMounts FPMA-D700DD Handleiding

17 December 2024

NeoMounts FPMA-D700D6 Handleiding

17 December 2024

NeoMounts FPMA-D750SILVER2 Handleiding

17 December 2024

NeoMounts FPMA-D750DWHITE Handleiding

17 December 2024

NeoMounts LFD-W1500 Handleiding

17 December 2024