Nec PD01CMB Handleiding

Nec Flat panel steun PD01CMB

Lees hieronder de 📖 handleiding in het Nederlandse voor Nec PD01CMB (12 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

I N S T A L L A T I O N I N S T R U C T I O N S

MCB1U LCB1U

(Shown installed to

1-1/2" NPT column as example only)

(Shown installed to

CPA Series extension column

as example only)

Back-to-Back Flat Panel Ceiling Mounts

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

MCB1U / LCB1U

MCB1U / LCB1U Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively "Milestone"), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all components are

properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this component can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

make sure the structure to which this component is attached

can support five times the combined weight of all equipment.

Reinforce the structure as required before installing the

component.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components located between the mount up to (and

including) the displays does not exceed 250 lbs (113.4 kg)

[125 lbs (56.7 kg) per display].

WARNING: Use this mounting system only for its intended

use as described in these instructions. Do not use

attachments not recommended by the manufacturer.

WARNING: Never operate this mounting system if it is

damaged. Return the mounting system to a service center for

examination and repair.

WARNING: Do not use this product outdoors.

IMPORTANT ! : The MCB1U/LCB1U

mounts are

designed to be mounted to a 1-1/2" NPT or NPSM

following ANSI/ASME B1.20.1 (Schedule 40, 0.154"

minimum thickness steel or aluminum-ASTM B221)

threaded extension column (not included);

a UL

Listed Chief CPA Series extension column (not included).

NOTE: The MCB1U/LCB1U mounts are intended to be used

with the UL Listed CPA Ceiling Plates (not included):

CPA330, CPA365, CPA395.

NOTE: The following UL Listed Chief ceiling plates WITHOUT

swaged collars (not included) may also be used:

CMA330, CMA345, CMA395.

--SAVE THESE INSTRUCTIONS--

Installation Instructions MCB1U / LCB1U

DIMENSIONS

20.82

528.9

MCB1U

DIMENSIONS: INCHES

[MILLIMETERS]

24.38

619.1

MAX MOUNTING

PATTERN WID TH

26.83

681.5

LCB1U

DIMENSIONS: INCHES

[MILLIMETERS]

Product specificaties

Merk:	Nec
Categorie:	Flat panel steun
Model:	PD01CMB
Kleur van het product:	Zwart
Gewicht:	11000 g
Gewicht verpakking:	14000 g
Montagewijze:	Plafond
Afmetingen verpakking (BxDxH):	750 x 430 x 280 mm
Maximale gewichtscapaciteit:	113.4 kg
Montage interface compatibiliteit (min):	100 x 200 mm
Montage interface compatibiliteit (max):	460 x 400 mm
Aantal displays ondersteund:	2
Bereik kantelhoek:	-5 - 20 °
Maximale schermgrootte:	55 "
Code geharmoniseerd systeem (HS):	85299097
Minimale schermgrootte:	32 "