Navilock NL-82052USB Handleiding

Navilock GPS apparaat NL-82052USB

Lees hieronder de 📖 handleiding in het Nederlandse voor Navilock NL-82052USB (14 pagina's) in de categorie GPS apparaat. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14
Engine module u-blox NEO-M8U UDR GNSS receiver
NL-82052RS, NL-82052USB und NL-82052TLL
manual (62764, 62763, 62745)
1. Introduction
The engine modules are serial, USB and TTL GNSS receiver with an internal active antenna.
The GNSS receiving is realized using the u-blox NEO-M8U module. In this module, high-sensitivity
sensors such as a 3D accelerometer and a 3D gyroscope are also integrated. These sensors enable the
acquisition of dynamic three-dimensional motion data. These include speed, acceleration, direction and
inclination. From this data, the engine modules acquires position data that complements the current GNSS
position data. They allow reliable position determination even when the GNSS signal is interrupted in the
case of four-wheeled vehicles.
In order to be able to fully utilize the UDR functionality, the receiver must be firmly and unchangeably
connected to the chassis of the vehicle. At the first commissioning after reaching the 3D Satfix, an
approximately 20 minute trip with a speed of more than 30 km/h has to be completed. The journey can be
completed in normal road traffic with curves and acceleration periods. During this travel, the above-
mentioned sensors values are calibrated fully automatic. During this time, the receiver supplies the normal
GNSS position data. From the time of the successful sensor calibration, the UDR position data is added to
the GNSS position data in the NMEA 4.1 protocol. The UDR data is determined and delivered with an
updating rate of 20 Hz.
Due to the additional UDR position data, the receiver reliably delivers its position immediately after
switching on even in the car park or garage.
If your vehicle is moved without its own force after calibration (towing, ferrying, etc.), the receiver
automatically discards its calibration data. At the next trip meeting the above criteria it will be automatically
recalibrated.
1.1. Contents*
1 x Navilock engine module
1 x 8 cm CD ROM including operation manual
* Before using the device, please make sure that all the parts are included in the package. If any parts are
missing or damaged, please contact your dealer immediately.
• Important health and safety information
When using this product, take the following precautions in order to avoid possible damages and
legal consequences. Always follow all safety and operation manuals exactly and keep them for
future reference. Observe all warnings in the operation manual and on the product. In order to
avoid injuries, electrocution, fire and damages to the product, observe the following precautions:
• Electric security
This product is designed for operation with power supply via the USB port. Any other operation
mode can be dangerous and may void the warranty claims for this product. This unit contains an
internal back-up battery.
NOTE: RECYCLE OR DISPOSE OF USED BATTERIES OR RECHARGEABLE BATTERIES IN
ACCORDANCE WITH ALL APPLICABLE REGULATIONS AND THE INSTRUCTIONS INCLUDED
WITH THE PRODUCT.
• Precautions regarding direct sunlight
Make sure the unit is not exposed to very high humidity and temperatures. Never leave the unit,
the battery or the rechargeable battery for an extended period in a vehicle or plate, where the
temperature can increase to over 60°C (140°F), for example on the dashboard of a car, the
window sill or behind a pane of glass, which is directly exposed to the sun or very strong UV
light. Otherwise the unit or the vehicle may be damaged, and the battery or the rechargeable
battery may overheat.
• Damages requiring repairs
Disconnect the unit from the AC supply in the following cases; also disconnect the rechargeable
battery and contact an authorized repair man or your dealer.
• Liquid or an object has entered the product.
• The product has fallen down or was damaged.
• There are visible signs of overheating.
• When operated normally, the product does not function flawlessly.
• Avoid using the unit directly after strong temperature changes.
If the unit is exposed to strong temperature and humidity fluctuations, condensation can form in
the unit. In order to avoid damage to the unit, please wait until the condensation has dried off
before using the unit.
NOTE: If you bring the unit from a cold to a warm environment, or vice versa, first let it get
accustomed to the new temperature before turning it on.


Product specificaties

Merk: Navilock
Categorie: GPS apparaat
Model: NL-82052USB
Kleur van het product: Meerkleurig
Gewicht: - g
Breedte: 30 mm
Diepte: 30 mm
Hoogte: 7.9 mm
LED-indicatoren: Status
Aantal USB 2.0-poorten: 1
Interface: USB
Ingangsspanning: 5 V
Frequentie: 1602.5625 MHz
Gevoeligheid: -160 dBmW
Aantal kanalen: 72 kanalen
Chipset: u-blox NEO-M8U
Bedrijfstemperatuur (T-T): -40 - 85 °C
Acquisitietijden - koud: 26 s
WAAS ontvangst: Ja
GPS-nauwkeurigheid - plaats: 2.5 m
GPS-nauwkeurigheid - snelheid: 2 m/s
Update rate: 20 Hz
Baud snelheid: 115.2 Kbit/s
Navigatie protocollen: GGA, GSA, GSV, NMEA 0183, RMC, VTG
Acquisitietijden - heet: 1 s
Navigation signals supported: B1, E1, L1

Heb je hulp nodig?

Als je hulp nodig hebt met Navilock NL-82052USB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding GPS apparaat Navilock

Handleiding GPS apparaat

Nieuwste handleidingen voor GPS apparaat