Natec Kangaroo Dual Handleiding

Natec Cradle/docking station Kangaroo Dual

Lees hieronder de 📖 handleiding in het Nederlandse voor Natec Kangaroo Dual (12 pagina's) in de categorie Cradle/docking station. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

KANGAROO DUAL

User Manual

PRODUCT FEATURES:

• Supports USB 3.0 with UASP up to 6Gbps

• Supports 2.5’’&3.5’’SATA I/II/III HDD or SSD

• Supports capacity 2x4TB or above

• Supports One Touch Backup or Duplicate

(OTB need software to support with PC connected,

Clone no need software to support without PC.)

• LED indicates power and data access and progress

• Supports plug & play

• Powered AC 100~240V 50~60Hz 0.8A,

DC 12V2.5A

PACKAGE CONTENTS:

• HDD Docking Station

• USB 3.0 cable

• User’s manual

• Power adapter(12V/2.5A)

HARDWARE SETUP:

Note: Images are for example only. Actual positions of switches or connectors and pieces may vary

depending on the model.

SYSTEM REQUIREMENTS:

• USB 3.0 port or USB 2.0 port (if the device is

connected to an USB 2.0 port, the transfer speed will

down to 480Mbps)

• Windows 2000 / XP / Vista / Win7 / Win8 / Win10 /

Mac OS 10.X or above (No driver installation needed)

•

OTB function does not work under Windows 98 and Mac.

Thank you for purchasing our Natec Kangaroo Dual USB 3.0 HDD Docking Station.

For your safety and the satisfaction of using this product, please read this manual carefully before

installation.

USER MANUAL

Natec Kangaroo Dual USB 3.0

HDD Docking Station

HDD-A (Source)

HDD-B (Target)

CLONE button

EN PL

Duplicator (CLONE) Mode

This section will introduce how to clone a hard disk without the need of a PC.

Note! The Duplicator Mode only works when the docking station is NOT connected to a PC via the USB

cable.

For clone function, you need two hard drives:

Source Disk: drive with the data you want to duplicate (clone).

Destination Disk: in which you want to store the data of the source disk.

Attention: The capacity of the destination disk should be equal or larger than the source disk.

Begin to duplicate

1. Make sure that those hard drives have no bad sectors. Bad sectors will cause unpredictable problems.

2. Put the Source Disk into the A bay, then put the Destination Disk into the B bay.

Please make sure that those hard drives are correctly and ﬁrmly connected to SATA connectors of the

docking station.

3. Connect the power adapter to the docking station and power outlet.

4. Press the power button to power up the docking station.

5. Wait at least 10s till the docking station is prepared.

Caution! All data on your Destination HD will be lost. If you have important data on the HD, please back up

the data before beginning the Clone operation.

6. Keep pressing the Clone button for 3 seconds to begin duplication.

During the Clone process, those LED indicators will flash to show the percentage of the progress.

Begin Clone process: four LED flash one by one.

One LED stays solid: 25%

Two LED stays solid: 50%

Three LED stays solid: 75%

Four LED stays solid: 100%

When the four LED all stay solid, the process of the Clone had been ﬁnished.

7. When the process of the Clone is ﬁnished, please press the power button on turn off the docking station.

Please take out those hard drives carefully because they may be very hot.

Note!

• Those hard drives may become hot during the Clone process.

• The Clone process may take various hours to ﬁnish.

Product specificaties

Merk:	Natec
Categorie:	Cradle/docking station
Model:	Kangaroo Dual
Kleur van het product:	Zwart
Breedte:	129 mm
Diepte:	95 mm
Hoogte:	75 mm
LED-indicatoren:	Status
Gebruiksaanwijzing:	Ja
Type verpakking:	Doos
Aan/uitschakelaar:	Ja
Meegeleverde kabels:	USB
Inclusief AC-adapter:	Ja
Aansluiting voor netstroomadapter:	Ja
Materiaal:	Aluminium
Opslagmedia-type:	HDD, SSD
Plug and play:	Ja
Ondersteunt Windows:	Windows 10, Windows 2000, Windows 7, Windows 8, Windows Vista, Windows XP
Mac-compatibiliteit:	Ja
Ondersteunt Linux:	Ja
Hostinterface:	USB 3.2 Gen 1 (3.1 Gen 1) Type-A
Max. overdrachtssnelheid:	5 Gbit/s
Opslag schijf-interface:	Serial ATA, Serial ATA II, Serial ATA III
Maximale opslagcapaciteit:	8 TB
Aantal USB 3.2 Gen 1 (3.1 Gen 1)-poorten:	1
Aantal storage drives ondersteund:	2
Opslagschijf afmetingen ondersteund:	2.5, 3.5 "
Hot-swap:	Ja