Nanlite Forza 200 Handleiding

Nanlite Lamp Forza 200

Lees hieronder de 📖 handleiding in het Nederlandse voor Nanlite Forza 200 (36 pagina's) in de categorie Lamp. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/36
Guangdong NanGuang Photo&Video Systems Co., Ltd
USER MANUAL
Forza 200
1
LED Daylight Spot Light
Product Diagram
LED total power 200W:
Rated power: 220W
Input voltage/current 24V/10.4A power adapter, :
14.4V - 14.8 V/12A(120W output)
26V/12A Sony V-mount battery (Not Included)
Color Temperature: 3200K/5600K
CRI: 98
TLCI: 97
Technical Data
Forza 200
2
1.Connection between the light fixture and power adapter.
Connection Way of the Power
3
2.Connection between the light fixture and battery.
4
18. USB port
19. Host output socket 20. DC power socket
11. Lamp body handle
13. Lamp body
input socket
15. Bracket fixing knob
8. Lock catch
12. Umbrella hole
10. Angle fixing knob
9. Reflector 14. Yoke
2. Handle
3. Power indicator
4. Power switch
5. DMX OUT
6. DMX IN
7. Battery holder
1. Control
operation panel
17. AC power input socket
16. DC power input
Product Details
5
1. Control operation panel: For displaying various function operations and data.
2. Handle: It is convenient for users to carry the host.
3. Power indicator: For determining the status of power input. Being on, power supply is normal.
  Flashing or being off, power supply is abnormal or no power input.
4. Power switch: For on/off the fixture.
5. DMX OUT: DMX signal output interface.
6. DMX IN: DMX signal input interface.
7. Battery holder: For installing the battery with 14.4 26V/12A Sony V-mount battery or power adapter.
8. Lock catch: For installing and disassembling reflector and other accessories with Bowens mount.
9. Reflector: For gathering light to improve central illumination.
10. Angle fixing knob: Allows for vertical adjustments and fixing of the lamp.
11. Lamp body handle: Be convenient for users to lift the lamps and adjust the direction of the light.
12. Umbrella hole: For installing/removing an umbrella.
13. Lamp body input socket:For connecting the lamp with power adapter.
14. Yoke: Designed for connecting the lamp to the light stand and adjusting the beam angle.
15. Bracket fixing knob: For connenting the spot light and camera equipment , and adjusting the horizontal
illumination direction of fixture.
16. DC power input: For connecting DC power to the lamp.
17. AC power input socket: For connecting the AC power cable to supply power to the adapter.
18. USB port: For updating the firmware.
19. Host output socket: To connect a DC cable for connecting between the lamp body and the controller
20. DC power socket: DC power output.
Detailed description
6
DC IN
1. Power Connection
â‘ When connect the power supply, please make sure the power , voltage and frequency should be consistent with
the provided power supply.
â‘¡When use the V mount battery, please make sure turn off the fixture and then plug in or pull out the battery or
DC cable. If using 14.8V battery, the output power is 120W. If using 26V battery, it allows full power output.
NOTE: Make sure to use the provided power cable and power adapter.(1)
(2)Make sure the plug of power supply and the cable to the socket of the fixture should be connected
as following.
2. Connection with the controller
Usage
1-
2-
4+
3+
4+
3+
1-
2-
DMX IN
DATA+ 3
GND 1
DATA- 2
DMX OUT
3 DATA+
1 GND
2 DATA-
NC
NC
NC
NC
7
1
3
2
120Ω PIN 2 PIN 3
3. DMX Circuit
In DMX mode, make sure the last light is the only light with a cable connected to the DMX output. There is a
resistance about 120(OHM) between the second pin and third pin of this plug (as shown). Make sure this plug
can be installed into the output interface of the last fixture, this will help avoid noise and reflection phenomenon
caused by the DMX signal during the transmitting process.
4. DMX Channel Control
When using a DMX console to control the fixture, each one must be set to its own DMX address, to receive the
dimmer signal and response correctly. The fixture has a total of 5 channels, set the first fixture's DMX start address
to 001, 006 for the second one displays, 012 for the third one and so on.
8
The Forza 200 has a total of 5 DMX channels
Channel Lighting Modes Detail DMX Value Description
DMX Channel Detail
DIMDaylight Mode 000 - 255
1Effect Mode
INT Loop 000 - 255
Flash
000 - 255
Pulse
Storm Auto
Storm Manual
TV 000 - 255
Paparazzi 000 - 255
Candle/Fire
000 - 255
Bad Bulb
Firework
Explosion Auto
Explosion Manual
Welding 000 - 255
DIMH
DIM
DIMH
000 - 255DIMH
DIM
DIM
DIMH
Daylight Mode
INT Loop
Flash
Pulse
Storm Auto
Daylight Mode 0 - 17
18 - 35
36 - 53
54 - 71
72 - 89
2Effect Mode
9
Channel Lighting Modes Detail DMX Value Description
DIML
TV
Storm Manual
Paparazzi
Candle/Fire
Bad Bulb
90 - 107
108 - 125
126 - 143
144 - 161
162 - 179
180 - 197
198 - 215
216 - 233
234 - 255
2 Effect Mode
Firework
Explosion Auto
Explosion Manual
Welding
Flash
INT Loop
INTERVALS
PULSES/MIN
INTVLRANGEL
TRIGGER
DIML
SPEED
DIML
INTENSITY
Pulse
Storm Auto
Storm Manual
000 - 255
000 - 255
000 - 255
000 - 255
000 - 255
000 - 255
000 - 255
000-255
000 - 255
3 Effect Mode
TV
Paparazzi
Candle/Fire
Bad Bulb
SPEED
SPEED
DECAY
DIML
000 - 255
000 - 255
000 - 255
000 - 255
Firework
Explosion Auto
Explosion Manual
Welding
10
SPEED
Flash
INT Loop
FLASHRATIO
INTVLRANGELH
SPEED
SPEED
SPEED
DECAY
DECAY
Storm Auto
TV
Candle/Fire
Bad Bulb
Firework
Explosion Auto
TRIGGERExplosion Manual
Channel Lighting Modes Detail DMX Value Description
000 - 255
000 - 255
000 - 255
000 - 255
000 - 255
000 - 255
000 - 255
000 - 255
000 - 255
4 Effect Mode
5 Effect Mode
SPEEDWelding 000 - 255
PAUSE: ON
PAUSE: OFF
Welding 0 - 127
0 - 127
5. 2.4G and Bluetooth Remote Control
The Forza 200 has a built-in 2.4Ghz receiver, enabling it to be remotely controlled by remote controller or by APP via
the 2.4G transfer device. It also has built-in bluetooth function to connet with bluetooth for more control options.
NOTE: 2.4G remote controller or 2.4G transfer device sold separately.
(See separate instructions for remote controller or 2.4G transfer device)
11
6. Installation the Reflector
7. Light stand clamp
When installing the reflector,
ensure its mounting points align
with the slots on the light fixture.
When the mounting points and
slots are aligned push the
reflector in place and rotate it
in the direction shown on the light
until you hear it click into place.
When removing the reflector,
push and hold the release
button and rotate until the
reflector is free to be
removed from the fixture.
Press the release button to
remove the reflector.
Push in the button to open
the clamp.
Secure the clamp on to the
light stand and rotate the
locking knob to secure.
Mount the power adapter into
the slots on the clamp.
12
DIM
100%
DAYLIGHT CH: 512
ON
Power Switch
Power Indicator (being on)
Brightness
Unlock/lock status
Fan status
Battery Power
Capacity
AddressMode
8. Installation of an Umbrella
Loosen the fixing knob. Put the umbrella into the
umbrella hole.
Tighten the angle fixing knob
to lock the umbrella in place.
1. Connection between fixture and power adapter/battery.
â‘ First be sure that the power switch of the control unit is in the "off " position. Now it is safe to connect the power
adapter or battery and power the unit on. If the power indicator is on that means the power supply is normal.
The LCD screen will display all the relevant information for the fixture, from the remaining battery power in top
right corner, to the effects mode status and percentage of power output.
Operating Instructions
13
DIM: 0%-100%
INTERVALS: 1.0s
FLASHRATIO: 50%
EFFECT MODE CH: 512
ON
EFFECT: FLASH
DIM
0%
DAYLIGHT CH: 512
ON
â‘¡DAYLIGHT Key: Press the DAYLIGHT key to enter DAYLIGHT mode, rotate the "left knob", clockwise to
increase the output while counterclockwise to reduce the output. Dim is reference to the output percentage.
DIM range: 0% --- 100%
â‘¢EFFECT Key: Press the EFFECT key to enter EFFECT mode, rotate the "left knob" to select the desired special
effect. Forza 200 has the following built-in Ieffects - INT Loop, Flash, Pulse, Storm Auto, Storm Manual, TV,
Paparazzi, Candle/Fire, Bad Bulb, Firework, Explosion Auto, Explosion Manual and Welding.
0%
.
.
.
100%
Rotate the "left knob" to select
the special effect.
DIM
100%
DAYLIGHT CH: 512
ON
DIM: 0%-100%
SPEED: 8s
EFFECT MODE CH: 512
ON
EFFECT: INT LOOP INT Loop
.
.
.
Welding
14
Rotate the "right knob" to select DIM 1,DIM 2 and SPEED.
Rotate the "left knob" to set the parameters.
DIM: 0%-100%
SPEED: 8s
EFFECT MODE CH: 512
ON
EFFECT: INT LOOP
DIM: 0%-100%
EFFECT MODE CH: 512
ON
EFFECT: INT LOOP
SPEED: 8s
DIM: 0%-100%
EFFECT MODE CH: 512
ON
EFFECT: INT LOOP
SPEED: 8s
DIM: 0%-100%
EFFECT MODE CH: 512
ON
EFFECT: INT LOOP
SPEED: 9s
( )1 NT LOOP
Rotate the "right knob" to select DIM 1,DIM 2 and SPEED, then rotate the "left knob" to set the speed
parameters. Speed range: 2S … 30S.
15
DIM: 0%-100%
INTERVALS: 1.0s
FLASHRATIO: 50%
EFFECT MODE CH: 512
ON
EFFECT: FLASH
Rotate the "right knob" to select DIM ,INTERVALS and FLASHRATIO.
Rotate the "left knob" to set the parameters.
DIM: 0%-100%
INTERVALS: 1.0s
EFFECT MODE CH: 512
ON
EFFECT: FLASH
FLASHRATIO: 50%
DIM: 0%-100%
INTERVALS: 1.0s
EFFECT MODE CH: 512
ON
EFFECT: FLASH
FLASHRATIO: 50%
DIM: 0%-100%
INTERVALS: 1.0s
EFFECT MODE CH: 512
ON
EFFECT: FLASH
FLASHRATIO: 51%
( )2 FLASH
Rotate the "right knob" to select DIM ,INTERVALS and FLASHRATIO, then rotate the "left knob" to set the
parameters. Intervals range: 0.1S … 10S, Flashratio range: 0%...100%.
16
Rotate the "right knob" to select DIM and PULSES/MIN.
Rotate the "left knob" to set the parameters.
DIM: 100%
PULSES/MIN: 40
EFFECT MODE CH: 512
ON
EFFECT: PULSE
DIM: 100%
EFFECT MODE CH: 512
ON
EFFECT: PULSE
PULSES/MIN: 40
DIM: 100%
EFFECT MODE CH: 512
ON
EFFECT: PULSE
PULSES/MIN: 40
DIM: 100%
EFFECT MODE CH: 512
ON
EFFECT: PULSE
PULSES/MIN: 41
( )3 PULSE
Rotate the "right knob" to select DIM and PULSES/MIN, then rotate the "left knob" to set the parameters.
Pulses/Min range:1...240.
17
Rotate the "right knob" to select DIM and INTVLRANGE.
Rotate the "left knob" to set the parameters.
DIM: 100%
INTVLRANGE: 2s - 6s
EFFECT MODE CH: 512
ON
EFFECT: STORM AUTO
DIM: 100%
EFFECT MODE CH: 512
ON
EFFECT: STORM AUTO
INTVLRANGE: 2s - 6s
DIM: 100%
EFFECT MODE CH: 512
ON
EFFECT: STORM AUTO
INTVLRANGE: 2s - 6s
DIM: 100%
EFFECT MODE CH: 512
ON
EFFECT: STORM AUTO
INTVLRANGE: 2s - 7s
( )4 STORM AUTO
Rotate the "right knob" to select DIM and INTVLRANGE, then rotate the "left knob" to set the parameters.
Intvlrange: 1s...60s.
18
Rotate the "right knob" to select DIM.
Rotate the "left knob" to set the parameters.
Press "right knob" to trigger Storm.
EFFECT MODE CH: 512
ON
PRESS RIGHT KNOB TO TRIGGER
EFFECT: STORM MANUAL
DIM: 100%
DIM: 100%
EFFECT MODE CH: 512
ON
EFFECT: STORM MANUAL
PRESS RIGHT KNOB TO TRIGGER
EFFECT MODE CH: 512
ON
PRESS RIGHT KNOB TO TRIGGER
EFFECT: STORM MANUAL
DIM: 100%
EFFECT MODE CH: 512
ON
PRESS RIGHT KNOB TO TRIGGER
EFFECT: STORM MANUAL
DIM: 99%
( )5 STORM MANUAL
Rotate the "right knob" to select DIM , then rotate the "left knob" to set the parameters. Press "right knob"
to trigger Storm.
19
Rotate the "right knob" to select DIM 1,DIM 2 and SPEED.
Rotate the "left knob" to set the parameters.
DIM: 0% - 100%
SPEED: 50
EFFECT MODE CH: 512
ON
EFFECT: TV
DIM: 0% - 100%
EFFECT MODE CH: 512
ON
EFFECT: TV
SPEED: 50
DIM: 0% - 100%
EFFECT MODE CH: 512
ON
EFFECT: TV
SPEED: 50
DIM: 0% - 100%
EFFECT MODE CH: 512
ON
EFFECT: TV
SPEED: 51
( )6 TV
Rotate the "right knob" to select DIM 1,DIM 2 and SPEED, then rotate the "left knob" to set the parameters.
Speed range: 1 … 100.
20
Rotate the "right knob" to select DIM and SPEED.
Rotate the "left knob" to set the parameters.
DIM: 100%
SPEED: 50
EFFECT MODE CH: 512
ON
EFFECT: PAPARAZZI
DIM: 100%
EFFECT MODE CH: 512
ON
EFFECT: PAPARAZZI
SPEED: 50
DIM: 100%
EFFECT MODE CH: 512
ON
EFFECT: PAPARAZZI
SPEED: 50
DIM: 100%
EFFECT MODE CH: 512
ON
EFFECT: PAPARAZZI
SPEED: 51
( )7 PAPARAZZI
Rotate the "right knob" to select DIM and SPEED, then rotate the "left knob" to set the parameters.
Speed range: 1 … 100.
21
Rotate the "right knob" to select DIM 1, DIM 2 and SPEED.
Rotate the "left knob" to set the parameters.
DIM: 0% - 100%
SPEED: 50
EFFECT MODE CH: 512
ON
EFFECT: CANDLE/FIRE
DIM: 0% - 100%
EFFECT MODE CH: 512
ON
EFFECT: CANDLE/FIRE
SPEED: 50
DIM: 0% - 100%
EFFECT MODE CH: 512
ON
EFFECT: CANDLE/FIRE
SPEED: 50
DIM: 0% - 100%
EFFECT MODE CH: 512
ON
EFFECT: CANDLE/FIRE
SPEED: 51
( )8 CANDLE/FIRE
Rotate the "right knob" to select DIM 1, DIM 2 and SPEED, then rotate the "left knob" to set the parameters.
Speed range: 1 … 100.
22
Rotate the "right knob" to select DIM ,INTENSITY and SPEED.
Rotate the "left knob" to set the parameters.
DIM: 100%
INTENSITY: 50
SPEED: 50
EFFECT MODE CH: 512
ON
EFFECT: BAD BULB
DIM: 100%
EFFECT MODE CH: 512
ON
EFFECT: BAD BULB
INTENSITY: 50
SPEED: 50
DIM: 100%
EFFECT MODE CH: 512
ON
EFFECT: BAD BULB
INTENSITY: 50
SPEED: 50
DIM: 100%
EFFECT MODE CH: 512
ON
EFFECT: BAD BULB
INTENSITY: 50
SPEED: 51
( )9 BAD BULB
Rotate the "right knob" to select DIM ,INTENSITY and SPEED, then rotate the "left knob" to set the
parameters. Intensity range: 1 … 100, Speed range: 1...100.
23
Rotate the "right knob" to select DIM ,SPEED and DECAY.
Rotate the "left knob" to set the parameters.
DIM: 100%
SPEED: 50
DECAY: 50
EFFECT MODE CH: 512
ON
EFFECT: FIREWORK
DIM: 100%
SPEED: 50
EFFECT MODE CH: 512
ON
EFFECT: FIREWORK
DECAY: 50
DIM: 100%
SPEED: 50
EFFECT MODE CH: 512
ON
EFFECT: FIREWORK
DECAY: 50
DIM: 100%
SPEED: 50
EFFECT MODE CH: 512
ON
EFFECT: FIREWORK
DECAY: 51
( )10 FIREWORK
Rotate the "right knob" to select DIM ,SPEED and DECAY, then rotate the "left knob" to set the parameters.
Speed range: 1 … 100, Decay range: 1...100.


Product specificaties

Merk: Nanlite
Categorie: Lamp
Model: Forza 200

Heb je hulp nodig?

Als je hulp nodig hebt met Nanlite Forza 200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Lamp Nanlite

Handleiding Lamp

Nieuwste handleidingen voor Lamp