NAD M2 Handleiding

NAD Receiver M2

Lees hieronder de 📖 handleiding in het Nederlandse voor NAD M2 (14 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/14

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Owner’s Manual

Direct Digital Amplier

SAVE THESE INSTRUCTIONS FOR LATER USE.

FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE

AUDIO EQUIPMENT.

1 Read instructions - All the safety and operating instructions should be

read before the product is operated.

2 Retain instructions - The safety and operating instructions should be

retained for future reference.

3 Heed Warnings - All warnings on the product and in the operating

instructions should be adhered to.

4 Follow Instructions - All operating and use instructions should be

followed.

5 Cleaning - Unplug this product from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for

cleaning.

6 Attachments - Do not use attachments not recommended by the

product manufacturer as they may cause hazards.

7 Water and Moisture - Do not use this product near water-for example,

near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet

basement; or near a swimming pool; and the like.

8 Accessories - Do not place this product on an unstable cart, stand,

tripod, bracket, or table. The product may fall, causing serious injury to

a child or adult, and serious damage to the product. Use only with a

cart, stand, tripod, bracket, or table recommended by the manufacturer,

or sold with the product. Any mounting of the product should follow

the manufacturer’s instructions, and should use a mounting accessory

recommended by the manufacturer.

9 A product and cart combination should be moved with

care. Quick stops, excessive force, and uneven surfaces may

cause the product and cart combination to overturn.

10 Ventilation - Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the product and to

protect it from overheating, and these openings must not be blocked

or covered. The openings should never be blocked by placing the

product on a bed, sofa, rug, or other similar surface. This product should

not be placed in a built-in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s instructions have

been adhered to.

11 Power Sources - This product should be operated only from the type

of power source indicated on the marking label. If you are not sure of

the type of power supply to your home, consult your product dealer or

local power company.

The primary method of isolating the amplier from the mains supply

is to disconnect the mains plug. Ensure that the mains plug remains

accessible at all times. Unplug the AC power cord from the AC outlet if

the unit will not be used for several months or more.

12 Grounding or Polarization - This product may be equipped with a

polarized alternating-current line plug (a plug having one blade wider

than the other). This plug will t into the power outlet only one way.

This is a safety feature. If you are unable to insert the plug fully into the

outlet, try reversing the plug. If the plug should still fail to t, contact

your electrician to replace your obsolete outlet. Do not defeat the safety

purpose of the polarized plug.

13 Power - Cord Protection - Power-supply cords should be routed so that

they are not likely to be walked on or pinched by items placed upon or

against them, paying particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the product.

14 Outdoor Antenna Grounding - If an outside antenna or cable system

is connected to the product, be sure the antenna or cable system is

grounded so as to provide some protection against voltage surges

and built-up static charges. Article 810 of the National Electrical Code,

ANSI/NFPA 70, provides information with regard to proper grounding

of the mast and supporting structure, grounding of the lead-in wire

to an antenna discharge unit, size of grounding conductors, location

of antenna discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode.

NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV system installer’s attention to Section

820-40 of the NEC which provides guidelines for proper grounding and, in

particular, species that the cable ground shall be connected to the grounding

system of the building, as close to the point of cable entry as practical.

15 Lightning - For added protection for this product during a lightning

storm, or when it is left unattended and unused for long periods of

time, unplug it from the wall outlet and disconnect the antenna or

cable system. This will prevent damage to the product due to lightning

and power-line surges.

16 Power Lines - An outside antenna system should not be located in the

vicinity of overhead power lines or other electric light or power circuits,

or where it can fall into such power lines or circuits. When installing an

outside antenna system, extreme care should be taken to keep from

touching such power lines or circuits as contact with them might be

fatal.

17 Overloading - Do not overload wall outlets, extension cords, or

integral convenience receptacles as this can result in a risk of re or

electric shock.

18 Object and Liquid Entry - Never push objects of any kind into this

product through openings as they may touch dangerous voltage points

or short-out parts that could result in a re or electric shock. Never spill

liquid of any kind on the product.

WARNING: THE APPARATUS SHOULD NOT BE EXPOSED TO

DRIPPING OR SPLASHING, AND OBJECTS FILLED WITH LIQUIDS,

SUCH AS VASES, SHOULD NOT BE PLACED ON THE APPARATUS.

AS WITH ANY ELECTRONIC PRODUCTS, USE CARE NOT TO SPILL

LIQUIDS INTO ANY PART OF THE SYSTEM. LIQUIDS CAN CAUSE A

FAILURE AND/OR A FIRE HAZARD.

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

19 Damage Requiring Service - Unplug this product from the wall outlet

and refer servicing to qualied service personnel under the following

conditions:

a) When the power-supply cord or plug is damaged.

b) If liquid has been spilled, or objects have fallen into the product.

c) If the product has been exposed to rain or water.

d) If the product does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the

operating instructions as an improper adjustment of other controls

may result in damage and will often require extensive work by a

qualied technician to restore the product to its normal operation.

e) If the product has been dropped or damaged in any way.

f) when the product exhibits a distinct change in performance-this

indicates a need for service.

20 Replacement Parts - When replacement parts are required, be

sure the service technician has used replacement parts specified

by the manufacturer or have the same characteristics as the

original part. Unauthorized substitutions may result in fire, electric

shock, or other hazards.

21 Safety Check - Upon completion of any service or repairs to this

product, ask the service technician to perform safety checks to

determine that the product is in proper operating condition.

22 Wall or Ceiling Mounting - The product should be mounted to a wall

or ceiling only as recommended by the manufacturer.

23 Heat - The product should be situated away from heat sources such as

radiators, heat registers, stoves or other products (including ampliers)

that produce heat.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE.

CAUTION

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,

FULLY INSERT.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN

AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER

TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE”

WITHIN THE PRODUCT’S ENCLOSURE THAT MAYBE OF

SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC

SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS

INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT

OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN

THE LITERATURE ACCOMPANYING THE APPLIANCE.

The equipment draws its nominal non-operational power from the AC

outlet with its POWER switch at the ON position.

The socket-outlet shall be installed near the apparatus and shall be easily

accessible.

CAUTION

Changes or modications to this equipment not expressly approved by

NAD Electronics for compliance could void the user’s authority to operate

this equipment.

CAUTION REGARDING PLACEMENT

To maintain proper ventilation, be sure to leave a space around the unit

(from the largest outer dimensions including projections) that is equal to or

greater than shown below.

Left and Right Panels: 10 cm

Rear Panel: 10 cm

Top Panel: 50 cm

IMPORTANT SAFETY INSTRUCTIONS

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Product specificaties

Merk:	NAD
Categorie:	Receiver
Model:	M2
Kleur van het product:	Zilver
Gewicht:	20200 g
Breedte:	435 mm
Diepte:	502 mm
Hoogte:	148 mm
Gewicht verpakking:	25600 g
Connectiviteitstechnologie:	Bedraad
Stroomverbruik (in standby):	1 W
Ingang stroom:	Ja
Bedoeld voor:	Thuis
Audio-uitgangskanalen:	2.0 kanalen
Frequentiebereik:	20 - 20000 Hz
Signaal/ruis-verhouding:	- dB
Totale harmonische vervorming (THD):	0.004 procent
AC-ingangsspanning:	100-240 V
AC-ingangsfrequentie:	50 - 60 Hz
Piekvermogen per kanaal:	250 W