MWM Phase Handleiding

MWM DJ Gear Phase

Lees hieronder de 📖 handleiding in het Nederlandse voor MWM Phase (16 pagina's) in de categorie DJ Gear. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/16
Quick Start Guide
02 Quick start guide
06 Guide de démarrage rapide
10 Guía de inicio rápido
14 Quick start guide (Deutsch)
18 クイック・スタート・ガイド
22 Warranty
Setup
Connect Phase to your DVS interface
The Receiver needs to be connected to a power
source (computer, power outlet…) to be used.
Connect the output channels of the Receiver
to the line inputs of your DVS interface (either
external sound card or integrated DVS mixer)
using the RCA Cables provided in the box.
Note: Depending on your setup you might have to
manually switch the inputs to line/cd mode on your DVS
interface/mixer.
Prepare your record
Take one of the magnetic stickers provided in
the box and remove the protective band under
the sticker.
Place your record on the turntable, align the
sticker hole with your turntable spindle and
place the sticker on your record.
Note: Be careful, stickers can be difficult to remove from
your records.
Activate the Remotes
Take the Remotes out of the Receiver and place
them on your record on the magnetic stickers.
Don’t move the Remotes until the LED strip
is completely lled up. Remotes are now
calibrated and ready to use.
Make sure your DJ software is set on relative
mode for Phase to work properly.
Note: By default Phase is optimized to work with Serato DJ
software©, if you are using a different DJ software you will
need to set it from the Phase configuration software.
Quick Start Guide
Before starting
Follow these steps carefully to make sure you
get the best experience with your Phase.
Conguration
Download the Phase conguration software
on mwm-store.com/conguration and install it
on your computer.
Plug the Phase Receiver to your computer
using the USB Cable provided in the box, and
launch the conguration software. Make sure
the Remotes are placed on the Receiver
when connecting it to your computer.
Connect to your MWM account (the one you
used to buy your Phase on mwm-store.com).
Or if you don’t have one, please create it to
register your product.
Follow the steps indicated on the conguration
software and install the available update to
access the latest rmware version of Phase.
You are all set and you can
now use Phase!
Charge
Put the Remotes on the Receiver. They will
automatically charge when the Receiver is
connected to a power source (computer,
power outlet...).
Note: If you’re using Phase for the first time, we
recommend you to fully charge the Remotes before
using them. You will need around two hours to
completely charge your Remotes.
For the latest information about Phase, product registration, or additional support
visit mwm-store.com/support
Phase Receiver
Phase Remote
USB Port
Output Channels A & B
Status LED
Setup
buttons
A & B
Dock A Dock B
Remotes
battery
indicators
English
3
2

Product specificaties

Merk: MWM
Categorie: DJ Gear
Model: Phase

Heb je hulp nodig?

Als je hulp nodig hebt met MWM Phase stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding DJ Gear MWM

MWM

MWM Phase Handleiding

15 Februari 2023

Handleiding DJ Gear

Nieuwste handleidingen voor DJ Gear

BeamZ

BeamZ Fingers 7 Handleiding

21 November 2024
BeamZ

BeamZ StrobeMoon Handleiding

21 November 2024
Flexson

Flexson VinylPlay Handleiding

17 November 2024
Denon DJ

Denon DJ MCX8000 Handleiding

17 November 2024
BeamZ

BeamZ PANTHER Quatro Handleiding

16 November 2024
Saramonic

Saramonic SR-EA5 Handleiding

15 November 2024
Yamaha

Yamaha MW12C Handleiding

14 November 2024
Yamaha

Yamaha MW12 Handleiding

14 November 2024
Yamaha

Yamaha MW8CX Handleiding

14 November 2024
Yamaha

Yamaha MW10C Handleiding

14 November 2024