Muse ML-60 IP Handleiding

Muse Cradle/docking station ML-60 IP

Lees hieronder de 📖 handleiding in het Nederlandse voor Muse ML-60 IP (2 pagina's) in de categorie Cradle/docking station. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

1. Light diffuser

2. ON/OFF button

3. (iPod-iPhone)

PLAY/PAUSE button

4. FM button

5. Natural Sound switch

6. Brightness control button

7. Light control button

8. VOLUME +/- button

9. / button

10. ALARM 1 button

11. ALARM 2 button

12. M/SET button

13. SLEEP button

14. LCD display

15. Remote sensor

16. SNOOZE/DIMMER

button

17. AUX IN jack

18. DC IN jack

19. iPhone-iPod drawer

20. Battery compartment

21. Speakers

ML-60 IP

GB - 1

User Manual

Lighting Audio System with iPod-iPhone Docking

Please read the instruction carefully

before operating the unit.

English GB - 2

GB - 4

LCD DISPLAY

D1. - iPhone/iPod mode

playback

D2. - radio mode

D3. - AUX IN mode

D4. - natural sound mode

D5. - brightness level indicator

D6. - alarm 1 wake to

radio/iPhone-iPod / buzzer /

natural sound

D7. - alarm 2 wake to

radio / iPhone-iPod / buzzer /

natural sound

D8. - memory indicator

D9. - memory digit

GB - 3

SLEEP (Automatic turn off)

Using the AC adaptor

This AC adaptor operates on AC100-240V~50/60Hz.

• The supplied AC adaptor is suitable for use on AC mains supplies of

100-240V~50/60Hz and should only be connected to a mains supply within

these parameters.

• Use the supplied AC adaptor only. Using any other AC adaptor could

damage the unit.

GB - 5

When you unpack your new iPhone/iPod clock-radio, make sure that you

have removed all the accessories and information papers:

- Main unit

- AC adaptor

- Remote control

- 5 pieces iPhone/iPod interchangeable adaptors

- User manual

UNPACKING YOUR UNIT

LOCATION OF CONTROLS

Replacing battery for the remote control

1. Press the stopper and pull out the battery holder.

2. Install 1pc “CR2025” lithium battery according to the polarity diagram on

the battery compartment.

3. Insert the battery holder into the remote control.

Main Unit

8 9

15 10 12

11 13

R1. button

R2. Light control button

R3. VOLUME +/- button

R4. button (mute)

R5. Brightness control button

R6. (iPod-iPhone) PLAY/PAUSE

button

R7. FM button

R8. Natural Sound switch

R9. SLEEP button

R10. / button

R11. / button (navigate menu in

iPhone/iPod mode)

R12.OK button (conrm a selection in

iPhone/iPod mode)

R13.MENU button (return to previous

menu in iPhone/iPod mode)

R14.M.SET button

R15.Alarm 1/2 button

R16.SNOOZE/DIMMER button

Remote Control

Remove the spacer tab before use

Remove the s pacer tab wh en yo u

use the remote control for the first

time. To remove the tab, pull it in the

direction of the arrow in the illustration

as shown.

D10

D11

D12

AMMWMHzkHz

NAT

D13

D5D4D3D2

NAT

POWER SUPPLY

Battery backup system

DC power: 2x1.5V, battery type AAA/R03/UM4(not provided) for clock and

alarm time backup system.

An alkaline type battery is recommended. For optimum performance, this

battery should be replaced every 6 months.

BACKUP SYSTEM: All clock settings will be kept in memory; however, the

clock time may require adjustment for exact accuracy. If the backup battery is

not installed, the display will show the clock ashing to indicate that you have

to reset the time and the alarm.

NOTE: When the battery backup is functioning, the display has no backlight.

BASIC OPERATION

Turn on the unit

The unit is in standby mode with clock display when it’s plugged in. Press

ON/OFF to switch on/off the audio function (radio, iPhone/iPod, natural sound

or auxiliary input).

Operating mode selection

- Press to select playing iPod/iPhone and control play/pause when this

function is ON.

- Press FM to select radio mode.

- Press to select natural sound mode, then press repeatedly to cycle

among 6 kinds of natural sound.

- Press to control brightness of white light (20 levels for choose) or set

color light when it’s in color light mode after turn on the light by .

- Press to switch between 3 states in loop: Light Off – White Light – Color

Light-...

Sound Volume

Press VOLUME +/- button to adjust sound level. There are a total of 30

volume levels.

Press button to cut off the sound temporarily, press this button again to

resume the sound.

Display Dimmer

When the unit is NOT in alarm mode, press button repeatedly to set

backlight brightness of display. 3 levels for choose: low, medium and high.

Cautions:

- The included AC adaptor is for use with this unit only. Do not use it with

other equipments.

- When the unit is not going to be used for long time, disconnect the AC

adaptor from the AC outlet.

- Be sure to use it near the wall outlet. If a malfunction occurs, disconnect the

plug from the wall outlet at once.

- When the AC adaptor is plugged in, the apparatus is not completely discon

nected from the main power source, even when the unit is turned off.

- AC adaptor is used as the disconnect device. It shall remain readily

operable and should not be obstructed during intended use. To disconnect

the apparatus from sup ply mains,completely disconnect the AC adaptor of

the apparatus from the mains socket outlet.

In sleep mode, the unit will turn off automatically after a specied time.

You can select duration in minutes before the unit turns off automatically.

Press SLEEP button repeatedly to select 120-110-100…0 minutes. 5

seconds after, display will resume to current time.

Note: Sleep time can be only set when the unit is turned ON.

- During SLEEP operation, press SLEEP button to display the remaining

sleep time.

- To turn off the unit before the SLEEP activates, press ON/OFF button, or

press SLEEP button repeatedly until value is adjusted to “00”. The sleep

function is cancelled and “SLEEP” icon will not displayed.

- If the playing time from your iPhone or other player is shorter than the se

lected sleep time, the music will stop at the end of the playing time.

Sleep with digressive light

If white light or color light is ON during SLEEP function, the light will turn OFF

with digressive brightness when the SLEEP time is reach.

TIME SETTING

When used for the rst time, or if the mains plug has been removed with no

backup battery inside, the clock display will blink for setting.

Setting sequence: Hour Minute 24h/12h……

1. In standby mode, long press M/SET button to enter the current time setting

mode. “HH” digits ash for hour setting.

2. Press / to set the hour time.

3. Press M/SET button to validate the hour value, minute digits flash for

adjust.

4. Press / to set the minute time.

5. Press M/SET button to conrm time setting.

6. “24H” ashes for setting. Press / to set, and press M/SET to

complete the time setting.

NOTE:

- At first use of the set, the time setting sequence will start by 24h/12h

selection.

- Any following sequence, if the time has been entered already, will start by

Hour (HH) selection.

- With clock display blinking, if no button is pressed within 8 seconds, it will

return to previous clock display.

ALARM SETTING

Alarm 1 or Alarm 2 setting

In standby mode,

1. Long press ALM.1 button, hour digit of alarm 1 ash. Press / to

adjust hour time, then press ALM.1 button again to conrm.

2. Minute digit of alarm 1 ash. Press / to adjust minute time. Press

ALM.1 button to conrm time setting.

3. “ - -“ ash for setting progressive light time before alarm time reach.

Press button repeatedly to select among “00’ – 05’ – 10’ – 15’ -- 20’ --

……”. (If “00” is selected, the white light will switch ON at wake-up time.)

4. Alarm 1 wake up source indicator ash. Press / to select wake up

source among or or or .

5. Press ALM.1 to conrm alarm 1 setting.

1 2 SNO OZE

DIMMER

SLEEP

VOL

ALM.

SET

R12

R10

R3 R4

R13

R14

R11

R16

R15

Note:

(1) If wake up by is chose, kind of natural sound ashes for select by next

step. Press / to select.

(2) Progressive light is using WHITE light with progression to the maximum

brightness.

- If the COLOR light is ON at the time of progressive light start, color light will

switch OFF before progressive light start.

- If the WHITE light is ON at the time of progressive light to start, it keeps and

no progressive light.

Same operation for Alarm 2 setting.

To check the alarm setting

In standby mode, press ALM.1 or ALM.2 for 2 times to show the alarm time

and alarm source. Display will resume to current time after 2 seconds.

To turning off alarm

The alarm is programmed to run for 59 minutes and triggers progressively.

Once the alarm 1 or alarm 2 is activated, corresponding alarm source

indicator / or / or / or / will ash on display.

1. In wake up mode, to temporarily stop alarm, press button, the alarm

will resume to the previous playing mode after 9 minutes. Alarm source in

dicators will keep ashing on display.

D10. - displays in 12hr time mode

D11. Time or radio frequency display

D12. - sleep indicator

D13. - radio mode & frequency unit

AMMWMHzkHz

This unit can be set for two different wake up times which you can choose

to use independently or simultaneously ALARM1, ALARM2 or both ALARM1

and ALARM 2.

GB -6 GB -7

SNOOZE

Front View

Back View

SNOOZE

LA-2883 IB MUSE 001 REV0 -GB.ind1 1 2011-3-10 16:33:31

GB - 12

GB - 10

GB - 8

GB - 9 GB - 11

Made for iPod and iPhone

"Made for iPod," "Made for iPhone," and "Made for iPad" mean that an

electronic accessory has been designed to connect specifically to iPod,

iPhone, or iPad, respectively, and has been certied by the developer to meet

Apple performance standards. Apple is not responsible for the operation of

this device or its compliance with safety and regulatory standards. Please

note that the use of this accessory with iPod, iPhone or iPad may affect

wireless performance.

LISTEN TO YOUR iPhone/iPod

iPhone call pick up

1. When phone call coming in, the music from the docking iPhone will pause

automatically.

2. Incoming call ring comes out from the unit speaker.

3. You can take iPhone from the unit and pick up phone call.

4. After nish your call, connect back the iPhone to the socket, it will resume

the playback of iPhone.

Charge your iPhone/iPod

While your iPhone/iPod is docked on the system, its battery recharges

automatically until fully charged.

Clock Time Synchronization

The rst time when your unit connected with iPhone, the clock time of your

unit will be synchronous with the iPhone.

After the rst time, you are required to press and hold M/SET button for 5

seconds to set your unit synchronous with iPhone.

iPhone/iPod interchangeable adapter

This system includes 5 different adapters designed to allow you to securely

connect any “dockable” iPhone/iPod model to the docking station. Refer to

the chart below to select the proper adapter for your particular iPhone/iPod

model and insert that adapter into the docking station before connecting your

iPhone/iPod.

IMPORTANT

The docking station in this system follows the Apple “Universal Dock” design.

This system can be tted to different iPhone or iPod model.

Play your iPhone/iPod on the main unit

1. Connect your iPhone/iPod to the socket of the unit.

2. Press the ON/OFF button to turn on the unit.

3. Press to select iPhone/iPod mode. The display indicates “ ”.

4. Press button to play or pause. Press and hold this button for 5

seconds to enter the iPod/iPhone sleep mode.

5. Select the previous or next track by pressing / button, press and

hold / on the unit to play review or fast forward.

6. Press VOL + / - buttons to adjust sound level.

Other iPhone/iPod functions MENU, OK (Select), ▲ (UP) and ▼ (DOWN)

are performed by the remote control.

MENU button: Press to return to previous page of menu.

▲or ▼ button: press to select a menu item.

OK button: press to confirm a selection (open a folder or start playing a

selected track).

AUXILIARY

This unit includes the AUX IN jack to allow you to connect external devices,

such as MP3 player, and listen to the music of your external device through

the speakers of this unit.

1. Connect the external device to the AUX IN jack at the back of the unit.

2. Press ON/OFF button, AUX icon shows on the display, and function mode

switch to AUXILIARY.

3. Start to play your auxiliary source.

4. Adjust the volume to desired level.

5. To stop playback, press ON/OFF button, or disconnect your external

device from the AUX IN jack.

SPECIFICATIONS

GENERAL

Power source AC 100-240V ~ 50/60Hz

DC 3V, 2x1.5V “AAA/R03/UM4” size batteries (not included) or

equivalent for memory backup

Dimension 120 W * 312 H * 178 L mm

TUNER

Frequency range: FM: 87.5 - 108 MHz

AUDIO SECTION

Power Consumption 15W

Speaker Impedance 8 ohm

MORE INFORMATION

ATTENTION : To reduce the risk of electric shock, do not

remove the cover. There are no user serviceable parts

inside the unit. Refer all servicing to qualied personnel.

The exclamation point within the triangle is a warning sign alerting

the user of important instructions accompanying the product.

The lightening ash with arrowhead symbol within the triangle is a

warning sign alerting the user of “dangerous voltage” inside the unit.

IMPORTANT

If at any time in the future you should need to dispose of this

product please note that Waste electrical products should not be

disposed of with household waste. Please recycle where facili-

ties exist. Check with your Local Authority or retailer for recycling

advice.(Waste Electrical and Electronic Equipment Directive)

WARNING - To reduce the risk of re or electric shock, do not expose this

appliance to rain or moisture.

For indoor use only

Class 1 LED product.

Do not throw batteries in re!

Do not place the product in closed bookcases or racks without proper

ventilation.

If the external exible cable or cord of this luminaire is damaged, it shall be

exclusively replaced by the manufacturer or his service agent or a similar

qualied person in order to avoid a hazard.

Attention should be drawn to the environmental aspects of battery disposal.

The marking information is located at the bottom of apparatus.

Ensure a minimum distance of 5cm around the apparatus for sufficient

ventilation.

Ensure that the ventilation is not impeded by covering the ventilation

openings with items, such as newspapers, table-clothes, curtains, etc.

Do not place n aked flame sou rces, such as l ighted candl es on the

apparatus.

Use the apparatus only in moderate climates.

Do not be exposed to dripping or splashing. And that no object lled with

liquids, such as vases, shall be placed on the apparatus.

Do not use your set immediately after transport from a cold place to a warm

place, there may be condensation problems.

Make sure that you keep your set away from water and high temperatures.

Clean the player with a soft cloth, or damp chamois leather. Never use

solvent.

To be completely disconnected the power input, the mains plug of the

apparatus shall be disconnected from the mains completely.

The mains plug should not be obstructed or should be easily accessed

during intended use.

Where the mains plug is used as the disconnect device, the disconnect

device shall remain readily operable.

Under the i nfluence of electrical fast trans ient or/and electrostatic

phenomenon, the product may malfunction and require user to power reset.

GB - 13

2. To stop the alarm for 24 hours, press ON/OFF button, alarm source indica

tors remain displayed. The alarm will trigger at the preset time one day

later.

3. To turn off the alarm permanently, press ALM 1 or 2 button in standby

mode until alarm source indicators disappears.

NOTE:

- You can adjust the wake up sound level by VOL+/- button in wake up by

iPhone/iPod or radio modes.

- But since this is a progressive alarm, the sound will be louder and louder.

You could decrease the volume after the alarm reaches to its max volume

level.

LIGHTING

1. Press button once to turn on the main light. The current level of

brightness will show on display for 5 seconds.

2. Press button repeatedly to adjust the level of brightness (from 01 to

20).

Color light

1. Press button twice to turn on the color light, then it will start to cycle in

different colors.

2. Press button to stop at current color, press this button again to

resume the cycle.

3. Press button again to turn off the light.

NATURAL SOUNDS

1. In standby mode, press button to trigger natural sound function.

“ 01” will show on display.

2. Press button repeatedly to select a kind of natural sound among six.

3. Press VOLUME +/- to adjust the volume level.

NAT

LISTENING TO THE RADIO

Manual operation

1. Press ON/OFF button to turn on the unit.

2. Press FM button to select RADIO mode, “ ” shows on display.

3. Press / to tune to a desired station step by step.

Note: Press FM button directly in standby mode also can enter RADIO mode.

Automatic search operation

The automatic searching operation locates strong stations. Press and hold

/ button to start automatic searching in the chosen direction. Press

again to stop

searching. A station with a weak signal can be tuned manually.

NOTE : Duri ng t he s e arch o pera ti on th e s o un d le ve l will b e muted

automatically.

Program preset stations

This unit is able to store 20 FM radio stations in memory.

1. Select a radio station either by manual or automatic search.

2. Press M/SET button once, “M” and preset number will ash on display.

3. Press ALM. 1 or ALM. 2 button to change preset number.

4. Press M/SET button again to save the radio station in the selected preset

channel.

5. Repeat steps 1-4 to store more stations.

When you memorize a station on a preset, the previous station is erased and

replaced by the new one.

Listening to the preset stations

Press ALM.1 or ALM.2 button directly to select a preset station.

NOTE: For a better reception in FM, extend the antenna. If a stereo

broadcast is received, “FM(ST)” is displayed.

Your clock radio is equipped with a saving energy LED main light and

multicolor ambience light.

Main light

GB - 8

GB - 14 GB - 15

NOTE: No adapter is provided for the 3G (third generation) iPod.

Please use the adapters which were included with your iPod at the time of

purchase. They will t properly into the docking station of this system.

LA-2883 IB MUSE 001 REV0 -GB.ind2 2 2011-3-10 16:33:34

Product specificaties

Merk:	Muse
Categorie:	Cradle/docking station
Model:	ML-60 IP
Kleur van het product:	Wit
Gewicht:	780 g
Breedte:	178 mm
Diepte:	120 mm
Hoogte:	312 mm
Gewicht verpakking:	1390 g
Breedte verpakking:	225 mm
Diepte verpakking:	154 mm
Hoogte verpakking:	368 mm
Gebruikershandleiding:	Ja
Bluetooth:	Nee
Beeldscherm:	LCD
Type aansluitplug:	3,5 mm
Type stroombron:	AC
Inclusief AC-adapter:	Ja
Indicatielampje:	Ja
Accu/Batterij voltage:	1.5 V
Snooze functie:	Ja
Gemiddeld vermogen:	- W
Ondersteund aantal accu's/batterijen:	2
FM-radio:	Ja
Wekker:	Ja
Backlight-kleur:	Wit
Klok functie:	Ja
Hoofdtelefoon uit:	Ja
Audio-uitgangskanalen:	- kanalen
Ondersteunde frequentiebanden:	FM,PLL
Apple docking-compatibiliteit:	iPhone,iPod
Ingebouwde lader:	Ja
Afstandsbediening inbegrepen:	Ja
Batterijen inbegrepen:	Nee
Slaaptimer:	Ja
Type batterij:	AAA
Display met achtergrondverlichting:	Ja