Motorola MTIDM045721 Handleiding

Motorola Bewakingscamera MTIDM045721

Lees hieronder de 📖 handleiding in het Nederlandse voor Motorola MTIDM045721 (3 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

Camera

CD Drill template

Quick guide

4 Screw plastic plugs

4 Tapping screws

PA 4X25

Security cap

1Mounting base

2Ethernet connection cable

3Power connection cable

IP DOME CAMERA

IP DOME VARIFOCAL CAMERA

Camera

CD Wrench Drill template

Quick guide

4 Screw plastic plugs

4 Tapping screws

PA 4X25

Please make sure that the wall or ceiling is strong

enough to withstand 3 times the weight of the camera.

Please install and use the camera in the dry environment.

1. Loosen the lock screw to disassemble the camera from

the mounting base.

2. Drill the screw holes and the cable hole on the

mounting surface using the available drill template.

3. Fix the mounting base to the mounting surface.

4. Route the cables through the cable hole and finally

connect the cables as needed.

1Mounting base

2Dome cover

3Locking screw

4Dome

5Ethernet connection cable

6Power connection cable

IP dome camera

Quick Guide

IP dome varifocal camera

•If the product does not work properly, please contact

your dealer or the nearest service center. Never

attempt to disassemble the camera yourself. Your

warranty will be voided if any problems are caused

by unauthorized repair or maintenance.

•

Handle with care and prevent dropping the camera.

When the product is mounted on a wall or ceiling,

ensure that the device is properly firmly fixed.

•Prevent touching the lens of the camera.

•

If cleaning is necessary, please use a clean cloth to

wipe it gently. If the device will not be used for a long

time, please cover the lens cap to protect the device

from dust.

Prevent aiming the camera directly to the sun or to

very bright environments.

•Do not place the camera in extrem hot or coldely

environments (operating temperature is -20˚C~50˚C),

dusty or damp locations.

• Para evitar exceso de calentamiento To avoid increase

in heat of product, good ventilation is required. •It is recommended to install the security cap for

outdoor installation.

•The 12 VDC power supply is not required if a PoE

network connection is used to power the camera, ..

Connecting the ethernet network cable

1. Loosen the cap nut from the main part.

2. Run the network cable (without RJ45 connector)

through the both parts. Then crimp the cable with

RJ45 connector.

3. Screw back and tighten cap to create a hermetic seal.

Quick Guide

•Please, read carefully these instructions before

operating your camera and save this as reference.

•All examples and images used in this guide are only

for reference.

•The content of this guide is subject to changes

without previous notice.

1. Precautions

2. Contents

3. Product overview

4. Installation

6. fo

Note: Step 6 only applies to varifocal dome cameras.

1. Make sure that the camera and the PC are well

connected

via LAN and in the same network.

2. Find the IP-Tool from the CD and then install it in the

computer. After that, run the IP-Tool as shown in this

section.

5. Network connection

There are two ways to access camera through LAN:

1. Access using IPTools App.

2. Access through browser, IE. (Explorer)

• IP Tools

Camera

Cable Cable

Router

Switch

3. Modify the IP address. The default IP address of this

camera is 192.168.226.201. Click the information of the

camera listed in the above table to show the network

information on the right hand. Modify the IP address

and gateway of the camera and make sure its network

address is in the same local network segment as that of

the computer. Please modify the IP address of your

device according to the practical situation.

For example, the IP address of your computer is

192.168.1.4. So the IP address of the camera shall be

changed to 192.168.1.X. After modification, please input

the password of the administrator and click “Modify”

button to modify the setting.

The default password of the administrator is “123456”.

4. Double clic the IP address and then the system ill- k w

pop up the IE browser to connect IP-CAM. After

downloading and running the Active X control, input the

user name and password in the window to access.

The default network settings are as shown below:

IP address: 192.168.226.201 HTTP:80

Subnet Mask: 255.255.255.0 Data Port: 9008

Gateway: 192.168.226.1

You may use the above default settings when you log in

the camera for the first time.

1. Set the IP address of the PC and make sure the

network segment should be as the same as the default

settings of IP-CAM. Open the network and share center.

Click “Local Area Connection” to pop up the following

window. Select “Properties” and then select Internet

protocol according to the actual situation (for example:

IPv4). Next, click “Properties” button to set the network

of the PC. Open the IE browser and input the default

address of IP camera and confirm.

• Direct access through PC

Camera Network cable PC

Motorola Limited Warranty

This Motorola brand Product is produced under license by MDX

ELECTRONICS, LLC. Subject to the exclusions below, MDX

ELECTRONICS warrants that this Motorola brand product

("Product") will remain free from defects in materials and

workmanship under normal consumer usage for year . This 2s

Warranty is your exclusive warranty. This Warranty extends only

to the ﬁrst consumer purchaser and is not transferable. MDX

ELECTRONICS will at no charge repair or replace any Product

that qualiﬁes under this Warranty. We may use functionally

equivalent reconditioned, refurbished, or new Products.

MOTOROLA and MDX ELECTRONICS are not responsible for

defects or damage that result from: (a) improper operation,

storage, misuse, abuse, maintenance, alteration, accident or

neglect, such as physical damage (cracks, scratches, etc.) to the

surface of the product or lens resulting from misuse; (b)

subjecting the Product or Accessory to abnormal usage or

conditions; (c) service provider alteration of the Product

including alteration of the Product’s ﬁrmware; or (d) other acts

which are not the fault of MOTOROLA or MDX ELECTRONICS,

are excluded from coverage.

Any implied warranties, including without limitation the implied

warranties of merchantability and ﬁtness for a particular

purpose, shall be limited to the duration of this limited warranty.

This warranty is provided in lieu of all other warranties, express

or implied. In no event shall MOTOROLA or MDX ELECTRONICS

be liable, whether in contract or tort (including negligence) for

damages in excess of the purchase price of the product, or for

any indirect, incidental, special or consequential damages of any

kind, or loss of revenue or proﬁts, loss of business, loss of

information or other ﬁnancial loss arising out in connection of or

with the ability or inability to use the product, to the full extent

these damages may be disclaimed by law.

Some jurisdictions do not allow the limitation or exclusion of

incidental or consequential damages, or limitation on the length

of an implied warranty, so the above limitations or exclusions

may not apply to you. This Warranty gives you speciﬁc legal

rights, and you may also have other rights that vary from one

jurisdiction to another.

To obtain support or need of information, doubts or questions,

please contact us at:

Tel: 01 800 801 6398 (México)

Tel: +011 52 55 9688-8814 (México, Latin America and Caribe)

WhatsApp: +52 155 7657 5586 (México, Latin America, Caribe)

Skype: soporte.motorolasecurity

Email: soporte@mdx-motorolasecurity.com

9:00AM - 5:00PM CST (Mon-Fri)

Manufactured, distributed or sold by MDX ELECTRONICS, LLC,

official licensee for this product. MOTOROLA and the Stylized M

Logo are trademarks or registered trademarks of Motorola

Trademark Holdings, LLC. and are used under license. All other

trademarks are the property of their respective owners.

Product specificaties

Merk:	Motorola
Categorie:	Bewakingscamera
Model:	MTIDM045721
Kleur van het product:	Black,White
Gewicht:	690 g
Hoogte:	102.5 mm
Soort:	IP-beveiligingscamera
Materiaal behuizing:	Metaal
Internationale veiligheidscode (IP):	IP66
Ondersteunde mobiele besturingssystemen:	Android,iOS
Bluetooth:	Nee
Ondersteund audioformaat:	Niet ondersteund
Ondersteunde videoformaten:	H.264,H.265
Vormfactor:	Dome
Ondersteuning voor plaatsing:	Binnen & buiten
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Montagewijze:	Plafond
Ondersteunde video-modi:	720p,1080p,1440p,1520p,1944p
Maximum resolutie:	2592 x 1944 Pixels
Totaal aantal megapixels:	5 MP
Videocompressieformaten:	H.264,H.265
Diameter:	120.4 mm
Type stroombron:	DC,PoE
Stroomuitvoer (volt):	12
Minimale belichting:	0 Lux
Aantal cameras:	1
Geïntegreerde geheugenkaartlezer:	Nee
Ingebouwde HDD:	Nee
Nachtvisie:	Ja
Video bewegings-detectie:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Focus:	Gemotoriseerd
Brandpuntbereik:	3.3 - 12 mm
Wachtwoordbeveiliging:	Ja
Vermogensverbruik (max):	10 W
Omvang optische sensor:	1/2.7 "
Aansluiting voor netstroomadapter:	Ja
Type beeldsensor:	CMOS
Camera sluitertijd:	1/25 - 1/100000 s
Ingebouwde microfoon:	Nee
Type camerasluiter:	Elektronisch
Ondersteunde grafische resoluties:	1280 x 720 (HD 720),1920 x 1080 (HD 1080),2304 x 1296,2560 x 1440,2592 x 1520,2592 x 1944
Webbrowser:	Ja
Ruisonderdrukking:	Ja
Netwerkstandaard:	IEEE 802.1x,IEEE 802.3af
Aantal gebruikers:	3 gebruiker(s)
Maximaal 30 frames per seconde:	30 fps
Upgraden van firmware mogelijk:	Ja
Ondersteunde netwerkprotocollen:	TCP/IP UDP DHCP NTP RTSP PPPoE DDNS SMTP FTP, HTTPS, SNMP, 802.1X, QoS
Reset button:	Nee
IP-adresfilter:	Ja
Progressive scan:	Ja
Ethernet interface type:	Fast Ethernet
Draaihoek:	360 °
Pan bereik:	0 - 360 °
Dag/nacht modus:	Ja
Maximum aperture number:	1.4
Aantal sensoren:	1
Videostreaming:	Ja
Weerbestendig:	Ja
Nachtkijker afstand:	40 m
Achtergrondverlichting compensatie:	Ja
Aantal effectieve pixels (H x V):	2592 x 1944 Pixels
Highlight Compensation (HLC) (compensatie voor sterke belichting):	Ja
Bitratecontrole:	Constant Bit Rate (CBR)/Variable Bit Rate (VBR)
Aanpassing van de afbeeldingskwaliteit:	Brightness,Contrast,DNR,Saturation,Sharpness
Wide Dynamic Range (WDR):	Ja
Bitrate:	128 Kbps - 10 Mbps
Wifi:	Nee
Bedrijfstemperatuur (T-T):	-20 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 90 procent
Bereik kantelhoek:	0 - 80 °
Privézone maskeren:	Ja
Gedragsanalyse:	Intrusion detection,Line crossing detection
Spiegel:	Ja
Systeemfuncties intelligente videobewaking (IVS):	Crossing line,Intrusion
Draaien & spiegelen:	Ja
Digital Wide Dynamic Range (DWDR):	Ja
Ruisonderdrukkingstechnologie:	3D-ruisonderdrukking
Hartslag:	Ja
Digitaal watermerk:	Ja
Auto-flip:	Ja
Management software:	MVMS AI, MVMS ENTERPRISE
Video-intelligentie met analytische capaciteit:	Ja
Interessegebied-codering (ROI):	Ja
Smart IR:	Ja
Thermische framesnelheid (PAL):	50 Hz
Thermische framesnelheid (NTSC):	60 Hz