Motorola MD207R Handleiding

Motorola Walkie talkie MD207R

Lees hieronder de 📖 handleiding in het Nederlandse voor Motorola MD207R (2 pagina's) in de categorie Walkie talkie. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Two-Way Radio

User Guide

MD207 Series

Safety and General Information

FCC Licensing Information

Control Buttons

KEM-ML36801-27

Important Information on Safe and Efficient Operation

Read This Information Before Using Your Radio.

The information provided in this document supersedes the general

safety information in user guides published prior to December 1, 2002.

Transmit and Receive Procedure

Your two-way radio contains a transmitter and a receiver. To control

your exposure and ensure compliance with the general

population/uncontrolled environment exposure limits, always adhere

to the following procedure:

• Transmit no more than 50% of the time.

• To receive calls, release the Push-to-Talk (PTT) button.

• To transmit (talk), press the PTT button.

Transmitting 50% of the time, or less, is important because the radio

generates measurable RF energy exposure only when transmitting

(in terms of measuring standards compliance).

Exposure to Radio Frequency Energy

Your Motorola two-way radio complies with the following RF energy

exposure standards and guidelines:

• United States Federal communications Commission, Code of

Federal Regulations; 47CFR part 2 sub-part J.

• American National Standards Institute (ANSI)/Institute of Electrical

and Electronic Engineers (IEEE) C95. 1-1992.

• Institute of Electrical and Electronics Engineers (IEEE) C95.1-1999

Edition.

• International Commission on Non-Ionizing Radiation Protection

(ICNIRP) 1998.

• Ministry of Health (Canada) Safety Code 6. Limits of Human

Exposure to Radiofrequency Electromagnetic Fields in the

Frequency Range from 3 KHz to 300 GHz, 1999.

• Australian communications Authority Radiocommunications

(Electromagnetic Radiation—Human Exposure) Standard, 2003.

Getting Started

Display Screen Guide

Installing the Batteries

Each radio uses 1 NiMH rechargeable battery pack or 3 AA alkaline

batteries and beeps when the batteries are low.

Installing NiMH Rechargeable Battery Pack

1. Turn the radio off.

2. With the back of the radio facing you, lift the battery latch up to

release the battery cover and remove the cover.

3. Remove the NiMH battery pack from the clear plastic bag (do not

disassemble or unwrap the battery pack).

4. Insert the NiMH battery pack with the diagram facing you. The

ribbon should be underneath the battery pack and should wrap

around the right side of the battery pack for easy removal.

5. Reposition the battery cover and press down to secure.

Installing the Three AA Alkaline Batteries (Optional Accessory)

1. Turn the radio off.

2. With the back of the radio facing you, lift the battery latch up to

release the battery cover and remove the cover.

3. Insert the three AA alkaline batteries with + and - polarity as shown

inside. The ribbon should be underneath the AA alkaline batteries and

should wrap around the right side of the batteries for easy removal.

4. Reposition the battery cover and press down to secure.

Radio Battery Meter

The radio battery icon shows the radio battery charge level, from full

to empty . When the radio has one segment left, the radio

chirps periodically or after releasing (Low Battery Alert).

PTT

Talking and Listening

To communicate, all radios in your group must be set to the same

channel.

1. To talk, press and hold .

2. When you are finished talking, release .

For maximum clarity, hold the radio two to three inches away from your

mouth and speak directly into the microphone. Do not cover the

microphone while talking.

Talk Range

Your radio is designed to maximize performance and improve

transmission range. Do not use the radios closer than five feet apart.

Monitor Button

Pressing and holding for three seconds allows you to listen to the

volume level of the radio when you are not receiving. You can also

press to check for activity on the current channel before you talk.

Push-to-Talk Timeout Timer

To prevent accidental transmissions and save battery life, the radio

emits a continuous warning tone and stops transmitting if you press

for 60 continuous seconds.

PTT

For More Information

For further information, you may call Motorola at 1-800-638-5119 (U.S.),

or e-mail us at support@giantintl.com or visit us on the Internet at

www.motorolasolutions.com/talkabout.

• ANATEL ANNEX to Resolution No. 303 of July 2, 2002.

• ANATEL ANNEX to Resolution No. 533 of September 10, 2009.

To ensure optimal radio performance and make sure human exposure to

radio frequency electromagnetic energy is within the guidelines set forth

in the above standards, always adhere to the following procedures.

Portable Radio Operation and EME Exposure

Antenna Care

Use only the supplied or an approved replacement antenna.

Unauthorized antennas, modifications, or attachments could damage the

radio and may violate FCC regulations.

Do NOT hold the antenna when the radio is “IN USE.” Holding the

antenna affects the effective range.

Body-Worn Operation

To maintain compliances with FCC/Health Canada RF exposure

guidelines, if you wear a radio on your body when transmitting, always

place the radio in a Motorola-supplied or approved clip, holder, holster,

case or body harness for this product. Use of non-Motorola-approved

accessories may exceed FCC/Health Canada RF exposure guidelines.

If you do not use one of the Motorola-supplied or approved body-worn

accessories and are not using the radio held in the normal use position,

ensure the radio and its antenna are at least 1 inch (2.5 cm) from your

body when transmitting.

Data Operation

If applicable, when using any data feature of the radio with or without an

accessory cable, position the radio and its antenna at least one inch

(2.5 cm) from the body.

Approved Accessories

53724: Remote Speaker with Push-to-Talk Microphone

53727: Earbud with Push-to-Talk Microphone

53728: Flexible Ear Receiver

Electromagnetic Interference/Compatibility

Note: Nearly every electronic device is susceptible to electromagnetic

interference (EMI) if inadequately shielded, designed or otherwise

configured for electromagnetic compatibility. This device complies with

Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference; and

2. This device must accept any interference received, including

interference that may cause undesired operation.

Facilities

To avoid electromagnetic interference and/or compatibility conflicts, turn

off your radio in any facility where posted notices instruct you to do so.

Hospitals or health care facilities may be using equipment that is

sensitive to external RF energy.

Aircraft

W hen instructed to do so, turn off your radio when onboard on aircraft.

Any use of a radio must be in accordance with applicable regulations

per airline crew instructions.

Medical Devices – Pacemakers

The Advanced Medical Technology Association recommends that a

minimum separation of 6 inches (15 cm) be maintained between a

handheld wireless radio and a pacemaker. These recommendations are

consistent with the independent research by and recommendations of

the U.S. Food and Drug Administration.

People with pacemakers should:

• ALWAYS keep the radio more than 6 inches (15 cm) from their

pacemaker when the radio is turned ON.

• Not carry the radio in the breast pocket.

• Use the ear opposite the pacemaker to minimize the potential for

interference.

• Turn the radio OFF immediately if there is any reason to suspect that

interference is taking place.

Medical Devices – Hearing Aids

Some digital wireless radios may interfere with some hearing aids. In the

event of such interference, you may want to consult your hearing aid

manufacturer to discuss alternatives.

Medical Devices - Other

If you use any other personal medical device, consult the manufacturer

of your device to determine if it is adequately shielded from RF energy.

Your physician may be able to assist you in obtaining this information.

Safety and General Use While Driving

Check the laws and regulations regarding the use of radios in the area

where you drive, and always obey them. If you do use your radio while

driving, please:

• Give full attention to driving and to the road.

• Use hands-free operation, if available.

• Pull off the road and park before making or answering a call if driving

conditions so require.

The use of a two-way radio while engaged in activities requiring

concentration may cause distraction or otherwise impair your ability to

safely participate in such activities. Always use technology safely.

Do not place a portable radio in the area over an air bag or in the air bag

deployment area. Air bags inflate with great force. If a portable radio is

placed in the air bag deployment area and the air bag inflates, the radio

may be propelled with great force and cause serious injury to occupants

of the vehicle.

Potentially Explosive Atmospheres

Turn off your radio prior to entering any area with a potentially explosive

atmosphere. Only radio types that are especially qualified should be

used in such areas as “Intrinsically Safe.” Do not remove, install or

charge batteries in such areas. Sparks in a potentially explosive

atmosphere can cause an explosion or fire resulting in bodily injury or

even death.

Note: The areas with potentially explosive atmospheres referred to

above include fueling areas such as below decks on boats, fuel or

chemical transfer or storage facilities, areas where the air contains

chemicals or particles (such as grain, dust or metal powders) and any

other area where you would normally be advised to turn off your vehicle

engine. Areas with potentially explosive atmospheres are often—but not

always—posted.

Blasting Caps and Areas

To avoid possible interference with blasting operations, turn off your

radio when you are near electrical blasting caps, in a blasting area, or in

areas posted “Turn off two-way radios.” Obey all signs and instructions.

Operational Cautions

Antennas

Do not use any portable radio that has a damaged antenna. If a

damaged antenna comes into contact with your skin, a minor burn can

result.

Batteries

All batteries can cause property damage and/or bodily injury such as

burns if a conductive material—like jewelry, keys or beaded chains—

touch exposed terminals. The conductive material may complete an

electrical circuit (short circuit) and become quite hot. Exercise care in

handling any charged battery, particularly when placing it inside a

pocket, purse or other container with metal objects.

Exercise care when removing NiMH or AA batteries. Do not use sharp

or conductive tools to remove either of these batteries.

Battery Charger Safety Instructions:

Save these Instructions

1. Do not expose the charger to rain or snow.

2. Do not operate or disassemble the charger if it has received a sharp

blow, or has been dropped or damaged in any way.

3. Never alter the AC cord or plug provided with the unit. If the plug will

not fit the outlet, have the proper outlet installed by a qualified

electrician. An improper condition can result in a risk of electric

shock.

4. To reduce the risk of damage to the cord or plug, pull the plug rather

than the cord when disconnecting the charger from the AC receptacle.

5. To reduce the risk of electric shock, unplug the charger from the

outlet before attempting any maintenance or cleaning.

6. Use of an attachment not recommended or sold by Motorola may

result in a risk of fire, electric shock or personal injury.

7. Make sure the cord is located so it will not be stepped on, tripped

over or subjected to damage or stress.

8. An extension cord should not be used unless absolutely necessary.

Use of an improper extension cord could result in a risk of a fire

and/or electric shock. If an extension cord must be used, make sure

that:

• The pins on the plug of the extension cord are the same number,

size and shape as those on the plug of the charger.

• The extension cord is properly wired and in good electrical condition.

• The extension cord size is 18 AWG for lengths up to 100 feet, and

16 AWG for lengths up to 150 feet.

9. The supply cord of the AC adaptor cannot be replaced. If the cord is

damaged, call customer service at 1-800-638-5119 or e-mail us at

support@giantintl.com.

Your Motorola radio operates on General Mobile Radio Service (GMRS)

frequencies and is subject to the Rules and Regulations of the Federal

Communications Commission (FCC). The FCC requires that all operators

using GMRS frequencies obtain a radio license before operating their

equipment. To obtain the FCC forms, please visit the FCC’s Web site at

wireless.fcc.gov/uls/index.htm?job=home to source form 605 and 159,

which includes all the instructions you will need.

If you wish to have the document faxed or mailed, or if you have

questions, please use the following contact information:

Changes or modifications not expressly approved by Motorola may void

the user’s authority granted by the FCC to operate this radio and should

not be made. To comply with FCC requirements, transmitter adjustments

should be made only by or under the supervision of a person certified as

technically qualified to perform transmitter maintenance and repairs in

the private land mobile and fixed services as certified by an organization

representative of the user of those services. Replacement of any

transmitter component (crystal, semiconductor, etc.) not authorized by

the FCC equipment authorization for this radio could violate FCC rules.

You can find the label with the FCC ID in the battery compartment.

Note:

Note:Note: Use of this radio outside the country where it was intended to be

distributed is subject to government regulations and may be prohibited.

Continued on back

MD207 Series

Removing the NiMH Battery Pack

1. Turn the radio off.

2. With the back of the radio facing you, lift the battery latch up to

release the battery cover and remove the cover.

3. Remove the NiMH battery pack by gently pulling the ribbon attached

to the radio.

4. Reposition the battery cover and press down to secure.

Removing the Three AA Alkaline Batteries (Optional Accessory)

1. Turn the radio off.

2. With the back of the radio facing you, lift the battery latch up to

release the battery cover and remove the cover.

3. Remove each alkaline battery by gently pulling the ribbon attached to

the radio and easing each battery out individually.

4. Reposition the battery cover and press down to secure.

Notes:

• Exercise care when removing NiMH or AA batteries. Do not use sharp

or conductive tools to remove either of these batteries.

• Remove the batteries before storing your radio for extended periods of

time. Batteries corrode over time and may cause permanent damage

to your radio.

Using the Plug-in Charging Adaptor

The battery plug-in charger (adaptor) provides charging convenience for

NiMH batteries in one or both radios. Charge the NiMH battery overnight

(at least 16 hours) before using it for the first time. After the initial

charge, an empty battery is fully charged within 14 hours.

1. Follow the steps above to install a NiMH battery pack.

2. Connect the AC power adaptor plug into the recharging jack at the

bottom of the radio. (The adaptor charges two radios.)

3. Plug the AC power supply into a standard wall outlet.

Notes:

• The battery icon will scroll while the battery pack is being charged.

• When moving between hot and cold temperatures, do not charge

the battery until the battery temperature acclimates (usually about

20 minutes).

• For optimal battery life, unplug the charging adaptor within 16 hours.

Do not store the radio while connected to the charger.

Low Battery Alert

In addition to your battery meter showing how much battery power you

have, your radio will beep to alert you to the fact that your batteries are low.

Attaching and Removing the Belt Clip

1. Attach belt clip to pocket or belt strap.

2. Align the belt clip post with the hole in the back of the radio.

3. Gently push until the clip clicks in place.

To Remove

1. Push down on the release tab at the top of the belt clip to

release the catch.

2. Pull the belt clip away from the back of the radio.

Turning Your Radio On and Off

1. To turn on, press and hold until a channel number appears

and the radio beeps.

2. To turn off, press and hold until the display goes blank.

Setting the Volume

Press to increase or to decrease the volume. The volume level

flashes and VOL displays.

For a fax:

Contact the

Fax-0n-Demand

system

For mail service:

Call the FCC

Forms Hotline

If you have

questions about

the FCC License:

Call the FCC

1-202-418-0177 1-800-418-FORM

(3676)

1-888-CALL-FCC

(225-5322)

PTT

Volume Scroll

(High) / Weather

Volume Scroll

(Low)

Numbers for Codes

Weather Alert

Numbers for Channel,

Call Tone

Menu Options

Selecting the Channel

Your radio has 22 channels. The channel is the frequency your radio

uses to transmit. (See Channels and Frequencies table below.)

1. Briefly press and release . The channel number flashes.

2. Press or to select a channel.

3. Press to confirm or to continue set up.

PTT

Selecting the Interference Eliminator Code

Interference Eliminator Codes help minimize interference by blocking

transmissions from unknown sources. Your radio has 121 Interference

Eliminator Codes. Codes 1 – 38 are the standard analog codes that

appear on other FRS/GMRS radios. Codes 39 – 121 are additional digital

codes added for superior interference protection. 0 is the off position, no

analog or digital codes are enabled.

To set the code for a channel:

1. Press until the code starts to flash.

2. Press or to select the code.

3. Press to save the code setting or to continue set up.

You can set a different code for each channel using this procedure. An

extended press of or allows you to scroll through the Interference

Codes rapidly so you can quickly reach the code you want.

Note: You must set the Interference Eliminator Code to 0 on a radio that

uses Interference Eliminator Codes to communicate with radios that do

not have Interference Eliminator Codes. Select 0 for “no tone, no code”

and OFF will flash on your radio’s display.

PTT

Channel Frequency

(MHz) Description Channel Frequency

(MHz) Description

1 462.5625 GMRS/FRS 12 467.6625 FRS

2 462.5875 GMRS/FRS 13 467.6875 FRS

3 462.6125 GMRS/FRS 14 467.7125 FRS

4 462.6375 GMRS/FRS 15 462.5500 GMRS

5 462.6625 GMRS/FRS 16 462.5750 GMRS

6 462.6875 GMRS/FRS 17 462.6000 GMRS

7 462.7125 GMRS/FRS 18 462.6250 GMRS

8 467.5625 FRS 19 462.6500 GMRS

9 467.5875 FRS 20 462.6750 GMRS

10 467.6125 FRS 21 462.7000 GMRS

11 467.6375 FRS 22 462.7250 GMRS

Channels and Frequencies

INTERFERENCE ELIMINATOR TONE / CODE VALUES

CODE (Hz) CODE (OCTAL) CODE (OCTAL)

1 67.0 39 023 81 315

2 71.9 40 025 82 331

3 74.4 41 026 83 343

4 77.0 42 031 84 346

5 79.7 43 032 85 351

6 82.5 44 043 86 364

7 85.4 45 047 87 365

8 88.5 46 051 88 371

9 91.5 47 054 89 411

10 94.8 48 065 90 412

11 97.4 49 071 91 413

12 100.0 50 072 92 423

13 103.5 51 073 93 431

14 107.2 52 074 94 432

15 110.9 53 114 95 445

16 114.8 54 115 96 464

17 118.8 55 116 97 465

18 123.0 56 125 98 466

19 127.3 57 131 99 503

20 131.8 58 132 100 506

21 136.5 59 134 101 516

22 141.3 60 143 102 532

23 146.2 61 152 103 546

24 151.4 62 155 104 565

25 156.7 63 156 105 606

26 162.2 64 162 106 612

27 167.9 65 165 107 624

28 173.8 66 172 108 627

29 179.9 67 174 109 631

30 186.2 68 205 110 632

31 192.8 69 223 111 654

32 203.5 70 226 112 662

33 210.7 71 243 113 664

34 218.1 72 244 114 703

35 225.7 73 245 115 712

36 233.6 74 251 116 723

37 241.8 75 261 117 731

38 250.3 76 263 118 732

77 265 119 734

78 271 120 743

79 306 121 754

80 311

MD207 Series

Products Covered

Products and Accessories as

defined above, unless otherwise

provided for below.

1 . Consumer Two-Way Radio

Accessories.

2 . Products and Accessories

that are Repaired or

Replaced.

Length of Coverage

One (1) year from the date of

purchase by the first consumer

purchaser of the product unless

otherwise provided for below.

1. Ninety (90) days from the

date of purchase by the first

consumer purchaser of the

product.

2. The balance of the original

warranty or for ninety (90)

days from the date returned

to the consumer, whichever

is longer.

Exclusions

Normal Wear and Tear. Periodic maintenance, repair and

replacement of parts due to normal wear and tear are excluded

from coverage.

Batteries. Only batteries whose fully charged capacity falls below

80% of their rated capacity and batteries that leak are covered by

this limited warranty.

Abuse & Misuse. Defects or damage that result from: (a) improper

operation, storage, misuse or abuse, accident or neglect, such as

physical damage (cracks, scratches, etc.) to the surface of the

product resulting from misuse; (b) contact with liquid, water, rain,

extreme humidity or heavy perspiration, sand, dirt or the like, extreme

heat, or food; (c) use of the Products or Accessories for commercial

purposes or subjecting the Product or Accessory to abnormal usage

or conditions; or (d) other acts which are not the fault of Motorola

Solutions, Inc. or Giant International Ltd., are excluded from coverage.

Use of Non-Motorola branded Products and Accessories. Defects

or damage that result from the use of Non-Motorola branded or

certified Products, Accessories, or other peripheral equipment are

excluded from coverage.

Unauthorized Service or Modification. Defects or damages

resulting from service, testing, adjustment, installation,

maintenance, alteration, or modification in any way by someone

other than Motorola Solutions, Inc., Giant International Ltd. or its

authorized service centers, are excluded from coverage.

Altered Products. Products or Accessories with (a) serial numbers

or date tags that have been removed, altered or obliterated; (b)

broken seals or that show evidence of tampering; (c) mismatched

board serial numbers; or (d) nonconforming or non-Motorola

branded housings, or parts, are excluded from coverage.

Communication Services. Defects, damages, or the failure of

Products or Accessories due to any communication service or

signal you may subscribe to or use with the Products or

Accessories is excluded from coverage.

Warranty

Consumer Two-Way Radio Products and Accessories purchased in

the United States.

What Does this Warranty Cover?

Subject to the exclusions contained to the right, Giant International

L td. warrants the Motorola branded consumer two-way radios that

operate via Family Radio Service or General Mobile Radio Service

that it manufactures (“Products”), the Motorola branded or certified

accessories sold for use with these Products that it manufactures

(“Accessories”) to be free from defects in materials and

workmanship under normal consumer usage for the period(s)

outlined below. This limited warranty is a consumer’s exclusive

remedy, and applies as follows to new Motorola branded Products

and Accessories manufactured by Giant International Ltd., and

purchased by consumers in the United States, which are

accompanied by this written warranty:

Who is covered?

This warranty extends only to the first consumer purchaser, and is

not transferable.

What will GIANT INTERNATIONAL LTD. do?

GIANT INTERNATIONAL LTD., at its option, will at no charge repair,

replace or refund the purchase price of any Products or

Accessories that does not conform to this warranty. We may use

functionally equivalent reconditioned/ refurbished/ pre-owned or

new Products, Accessories or parts.

How to Obtain Warranty Service or Other Information?

To obtain service or information, please call:

USA Two-Way Radios

1-800-638-5119

support@giantintl.com

For Accessories, please call the telephone number designated

above for the product with which they are used.

You will receive instructions on how to ship the Products or

Accessories at your expense, to a GIANT INTERNATIONAL LTD.

Authorized Repair Center. To obtain service, you must include: (a) a

copy of your receipt, bill of sale or other comparable proof of

purchase; (b) a written description of the problem; (c) the name of

your service provider, if applicable; (d) the name and location of the

installation facility (if applicable) and, most importantly; (e) your

address and telephone number.

W hat Other Limitations Are There?

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE

DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR,

REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS

LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE

CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL

MOTOROLA SOLUTIONS. INC. OR GIANT INTERNATIONAL LTD. BE

LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING

NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE

OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT,

INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY

KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS,

LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT

OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE

THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE

DAMAGES MAY BE DISCLAIMED BY LAW.

Some states and jurisdictions do not allow the limitation or

exclusion of incidental or consequential damages, or limitation on

the length of an implied warranty, so the above limitations or

exclusions may not apply to you. This warranty gives you specific

legal rights, and you may also have other rights that vary from state

to state or from one jurisdiction to another.

Patent and Copyright Information

Manufactured, distributed or sold by Giant International Ltd., official

licensee for this product. MOTOROLA, MOTOROLA SOLUTIONS and

the Stylized M Logo are trademarks or registered trademarks of

Motorola Trademark Holdings, LLC and are used under license. All

other trademarks are the property of their respective owners.

Special Features

Keypad Lock

To avoid accidentally changing your radio settings you can lock your

keypad:

1. Press and hold until displays.

2. When in lock mode, you can turn the radio on and off, receive,

transmit, send a call tone, and monitor channels. All other functions

are locked.

To unlock the radio, press and hold for a few seconds until no

longer displays.

Scanning Channels

Use scan to search the 22 channels for transmissions from unknown

parties, to find someone in your group who has accidentally changed

channels, or to quickly find unused channels for your own use.

There are 2 modes of scanning (basic and advanced) to make your

search more effective. The "Basic Scan" mode uses the channel and

code combinations for each of the 22 channels as you have set them.

The “Advanced Scan” mode will scan all channels for any and all codes,

detect any code in use, and use that code value temporarily for that

channel.

To start Scanning:

1. Briefly press the key. The scan will appear in the display, and the

radio will begin to scroll through all channel and code combinations.

2. When the radio detects channel activity matching the channel and code

combination, it stops scrolling and you can hear the transmission.

3. To respond and talk to the person transmitting, press within five

seconds after the end of the transmission.

4. The radio will resume scrolling through the channels five seconds after

the end of any received activity.

5. To stop scanning, briefly press the key.

To start Advanced Scanning:

1. Set the Interference Eliminator Code to “0”.

2. Briefly press the key. The scan will appear in the display, and the

radio will begin to scroll through the channels. No Interference Eliminator

Codes will filter what is heard.

PTT

Setting and Transmitting Call Tones

Your radio can transmit different call tones to other radios in your group

so you can alert them that you want to talk. You have 10 call tones from

which to choose.

To set a call tone:

1. With the radio on, short press until appears. The current call

t one setting flashes.

2. Press or to change and hear the call tone.

3. Press to set the new call tone or to continue set up.

To transmit your call tone to other radios set to the same channel as

your radio, press .

Note: Setting the call to 0 disables the call tone feature.

Transmitting a Talk Confirmation Tone

You can set your radio to transmit a unique tone when you finish

transmitting. It is like saying “Roger” or “Over” to let others know you

are finished talking.

1. With the radio on, short press until appears. The current

setting On/Off flashes.

2. Press or to turn On or Off.

3. Press to set the talk confirmation tone or to continue

set up.

Keypad Tones

You may enable or disable the speaker key tones. You will hear the key

tone each time a button is pushed.

1. Press until appears. The current setting On/Off will flash.

2. Press either or to turn On or Off.

3. Press to confirm or to continue set up.

Note: When the key tone feature is off, the following are not disabled:

• Transmit timeout alert tone

• Power-down alert tone

• Low battery alert tone

• The transmitted talk confirmation tone

Auto Power Off

Your radio will save power by automatically turning itself off if unused

after a predetermined amount of time.

1. Activate this setting by short pressing until displays. The

current setting (0, 30, 60, 90) will flash.

2. Press or to set the time to 30 minutes, 60 minutes or

90 minutes.

3. When you exit the Menu mode, the setting timer will begin if you are

not using the radio.

4. The screen shows .

5. Press to confirm or to exit Menu mode.

PTT

3. When the radio detects channel activity with ANY code (or NO code), it

stops scrolling and you can hear the transmission. Any Interference

Eliminator Code that may be in use by that party will be detected and

displayed.

4. To respond and talk to the person transmitting, press within five

seconds of the end of the transmission. The radio will transmit using the

newly detected Interference Eliminator Code.

5. The radio will resume scrolling through the channels five seconds after

the end of any received activity.

6. To stop scanning, briefly press the key.

Scanning Notes

1. If you press while the radio is scrolling through inactive channels,

the transmission will be on the “home channel”. Scanning will

resume five seconds after the end of your transmission. You may

press to stop scanning at any time.

2. If the radio stops on an undesired transmission, you may immediately

resume the scan by briefly pressing .

3. If the radio repeatedly stops on an undesired transmission, you may

temporarily remove that channel from the scan list by pressing and

holding for three seconds. You may remove more than one

channel in this way.

4. To restore the removed channel(s) to the scan list, turn the radio off

and then back on, or exit and re-enter the scanning mode by

pressing .

5. You cannot remove the home channel from the scan list.

6. In "Advanced Scan" mode, the detected code will only be used for

one transmission. You must note the code, exit scan, and set that

detected code on that channel to permanently use the detected

code.

Use With Accessories

You can transmit more reliably with the use of optional PTT headset

accessories. A PTT headset allows privacy to others around you while

listening.

Many accessories (sold separately) are available for your radio.

For more information, visit our Web site at

www.motorolasolutions.com/talkabout or shop.giantintl.com.

1. Turn the radio off and plug the PTT accessory into the accessory

jack.

2. Turn the radio on. You may now press the PTT on the accessory

microphone instead of the radio.

3. Adjust the volume appropriately by pressing . Lower the volume

before placing the accessory on your head or in your ear.

Note: The MD Series does not have VOX capabilities, and is only

compatible with PTT headset accessories.

Weather Receiver

This radio can tune in to broadcasts by the United States National

Oceanic and Atmospheric Administration (NOAA) Weather Radio.

You can listen to a weather channel (see “Weather Channels and

Frequencies” table for details) or set the radio to alert you to emergency

weather broadcasts that interrupt routine broadcasts. When you listen to

a weather channel, you cannot use the radio in scan mode or for two-

way communications.

NOAA has transmitters located throughout the United States. These

transmitters broadcast watches, forecasts, and other information

24 hours a day.

Note: NOAA weather radio stations are assigned to cover specific areas

and service may be limited. Please check with your local weather office

for frequency and details, or visit www.weather.gov/nwr in the US to

view the appropriate transmitter for your area.

The use of the NOAA logo does not provide an endorsement or implied

endorsement by NOAA’s National Weather Service.

Turning Weather Channel Reception On and Off

1. To turn weather reception on, press and hold for 3 seconds.

2. To turn off, press and hold for 3 seconds or turn the radio off and

then back on.

Scanning for Weather Channel

The radio can scan for an active NOAA transmission automatically.

1. After turning "Weather Reception" on, briefly press the key.

2. The scan icon will appear in the display, and the channel will

scroll through the NOAA channels 1-7.

3. When the radio detects channel activity, it stops scanning and you

can hear the transmission.

4. You may resume the scan by briefly pressing or .

5. To stop scanning, briefly press . The scan icon will disappear.

Setting the Weather Channel Manually

If you know which frequency is correct for your location, refer to the

"Weather Channels and Frequencies" table to manually set your radio to

the appropriate weather channel.

1. After turning Weather Reception on, press . The current channel

flashes.

2. Press or to select the appropriate channel with good

reception in your area.

3. Press to save the weather channel setting.

Setting the Weather Alert

The radio can be set to respond to NOAA Weather Radio emergency

messages. A special alarm tone sounds an alert and turns on the

weather receiver to give you immediate weather and emergency

information.

PTT

1. After turning Weather Reception on, press twice. ON or OFF

flashes.

2. Press or to select ON to activate. If you activate the Weather

Alert and return to two-way mode, will display.

3. Press to save the Weather Alert setting.

4. Press and hold for 3 seconds to return to two-way mode.

PTT

Call Tone

WEATHER CHANNELS AND FREQUENCIES

CHANNEL RX (MHz) CHANNEL RX (MHz) CHANNEL RX (MHz)

WX1 162.550 WX5 162.450 WX9 161.775

WX2 162.400 WX6 162.500 WX10 161.750

WX3 162.475 WX7 162.525 WX11 162.000

WX4 162.425 WX8 161.650

Product specificaties

Merk:	Motorola
Categorie:	Walkie talkie
Model:	MD207R

Heb je hulp nodig?

Als je hulp nodig hebt met Motorola MD207R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Walkie talkie Motorola

Motorola WAVE PTX TLK 110 Handleiding

5 November 2024

Motorola Mag One BPR40 Handleiding

24 September 2024

Motorola Talkabout T72 Handleiding

30 Juli 2024

Motorola Talkabout T110TP Handleiding

29 Mei 2024

Motorola WAVE Mobile TLK 150 Handleiding

17 April 2024

Motorola TALKABOUT T802 Handleiding

22 Februari 2024

Motorola TALKABOUT T803 Handleiding

22 Februari 2024

Motorola T802 Handleiding

18 December 2023

Motorola TLKR T72 Handleiding

3 Juli 2023

Motorola XT185 Handleiding

22 Juni 2023

Handleiding Walkie talkie

Nieuwste handleidingen voor Walkie talkie

GoGEN BOB VYSILACKY Handleiding

30 September 2024

Baofeng UV-82 Handleiding

26 Augustus 2024

Yaesu VX-2R Handleiding

16 Juli 2024

Yaesu FT-4XR Handleiding

16 Juli 2024

Yaesu FT-1500M Handleiding

16 Juli 2024

Yaesu FT-4VR Handleiding

16 Juli 2024

Yaesu FTM-100DR Handleiding

16 Juli 2024

Yaesu FT-2600M Handleiding

16 Juli 2024

Yaesu FTM-7250DR Handleiding

16 Juli 2024

Yaesu FT-65R Handleiding

16 Juli 2024