Motorola HDT100 Handleiding

Motorola Digitale decoders tuners HDT100

Lees hieronder de 📖 handleiding in het Nederlandse voor Motorola HDT100 (48 pagina's) in de categorie Digitale decoders tuners. Deze handleiding was nuttig voor 69 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/48

UserGuide

HDT100

HighDefinition

Tuner

POWER SIGNALLOSS

POWER

ENTER

EXIT

IMPORTANT SAFETY INSTRUCTIONS

1 Read instructions

All the safety and operating instructions should be read before the appliance is operated.

2 Retain instructions

The safety and operating instructions should be retained for future reference.

3 Heed warnings

All warnings on the appliance and in the operating instructions should be adhered to.

4 Follow instructions

All operating and use instructions should be followed.

5 Cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning.

6 Attachments

Do not use attachments not recommended as they may cause hazard.

7 Water and moisture

Do not use this equipment near water; for example, near a bathtub, wash bowl, kitchen sink, or

laundry-tub, in a wet basement, or near a swimming pool, and the like.

8 Accessories

Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall

causing serious injury and serious damage to the appliance. Use only with a cart, stand, tripod,

bracket, or table recommended by the manufacturer, or sold with the equipment. Any mounting of

the appliance should follow the manufacturer’s instructions, and should use a mounting accessory

recommended by the manufacturer.

9 Ventilation

Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of

the equipment and to protect it from overheating. The openings should never be blocked by

placing the product on a bed, sofa, rug, or similar surface. Equipment should never be placed near

or over a radiator or heat register, or in a built-in installation such as a bookcase or rack unless

proper ventilation is provided.

10 Power sources

This product should be operated only from the type of power sources indicated on the marking

label. If you are not sure of the type of power supplied to your home, consult your local power

company. For equipment intended to operate from battery power, or other sources, refer to the

operating instructions.

11 Ground or polarization

This equipment may be equipped with a polarized alternating-current line plug (a plug having one

blade wider than the other). This plug will fit into the power outlet only one way. This is a safety

feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug

should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the

safety purpose of the polarized plug.

This equipment may be equipped with a 3-wire grounding-type plug, a plug having a third

(grounding) pin. This pin will only fit into a grounding-type power outlet. This is a safety feature. If

you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete

outlet. Do not defeat the safety purpose of the grounding-type plug.

12 Power cord protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by

items placed upon or against them, paying particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the appliance

IMPORTANT SAFETY INSTRUCTIONS

13 Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the equipment, be sure the antenna or cable

system is grounded as to provide some protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with

regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit,

connection to grounding electrodes, and requirements for the grounding electrode.

14 Lightning

For added protection for this equipment during a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable

system. This will prevent damage to the video product due to lightning and power line surges.

15 Power lines

An outside antenna system should not be located in the vicinity of overhead power lines or where it

can fall into such power lines or circuits. When installing an outside antenna system, extreme care

should be taken to keep from touching such power lines or circuits, as contact with them may be

fatal.

16 Overloading

Do not overload wall outlets and extension cords as this can result in a risk of fire or electrical

shock.

17 Object and liquid entry

Never push objects of any kind into this equipment through openings, as they may touch

dangerous voltage points or short-out parts that could result in a fire or electrical shock. Never spill

liquid of any kind on the product.

18 Servicing

Do not attempt to service this equipment yourself, as opening or removing covers may expose you

to dangerous voltage or other hazards, refer all servicing to qualified service personnel.

19 Damage requiring service

Unplug this equipment from the wall outlet and refer servicing to qualified service personnel under

the following conditions:

~= When the power supply cord or plug is damaged.

Ä= If the equipment has been exposed to rain or water.

Å= If liquid has been spilled, or objects have fallen into the equipment.

Ç= If the equipment does not operate normally by following the operating instructions. Adjust only

those controls that are covered by the operating instructions, as an improper adjustment of

other controls may result in damage and will often require extensive work by a qualified

technician to restore the equipment to its normal operation.

É= If the equipment has been dropped or cabinet has been damaged.

Ñ= When the equipment exhibits a distinct change in performance, indicating a need for service.

20 Replacement parts

When replacement parts are required, be sure the service technician has used replacement parts

specified by the manufacturer or have the same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, or other hazards.

21 Safety check

Upon completion of any service or repairs to this video product, ask the service technician to

perform safety checks to determine that the product is in proper operational condition.

Product specificaties

Merk:	Motorola
Categorie:	Digitale decoders tuners
Model:	HDT100

Heb je hulp nodig?

Als je hulp nodig hebt met Motorola HDT100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Digitale decoders tuners Motorola

Motorola DCH6200 Handleiding

17 Augustus 2022

Motorola DCX3200-P2 Handleiding

16 Augustus 2022

Motorola DCH100 Handleiding

17 Augustus 2022

Motorola DCH200 Handleiding

16 Augustus 2022

Motorola DCT2000 Handleiding

15 Augustus 2022

Motorola VIP 1963 - KPN Interactieve TV Handleiding

4 April 2022

Motorola DCX3200-M P3 Handleiding

16 Augustus 2022

Motorola HDT100 Handleiding

16 Augustus 2022

Motorola VIP 1853 - KPN Interactieve TV Handleiding

6 Juli 2021

Handleiding Digitale decoders tuners

Nieuwste handleidingen voor Digitale decoders tuners

Metronic T2 HD zapbox Handleiding

20 September 2024

Aston xena 1700 Handleiding

16 Oktober 2023

Aston Simba 201 Handleiding

16 Oktober 2023

Aston xena 2000 Handleiding

16 Oktober 2023

Topfield TF-3000CI Handleiding

1 Oktober 2023

Lyngbox LB-1ST Handleiding

4 Oktober 2023

Topfield tf 6000 cot Handleiding

1 Oktober 2023

Topfield tf 4000 fe Handleiding

1 Oktober 2023

Topfield tf 3000 cot d Handleiding

1 Oktober 2023

Topfield tf600pvrc Handleiding

1 Oktober 2023