Motorola C1004L Handleiding

Motorola Draadloze DECT telefoons C1004L

Lees hieronder de 📖 handleiding in het Nederlandse voor Motorola C1004L (2 pagina's) in de categorie Draadloze DECT telefoons. Deze handleiding was nuttig voor 61 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Switch on the mains power.

Installing and charging the handset

1. Remove the battery cover from the back of the handset and insert the

rechargeable Ni-MH battery cells supplied. Please note the ’+’ and

’-’ markings inside the battery compartment and insert in the correct

direction.

2. Slide the battery cover back into place.

3. If you are charging the batteries for the rst time, place the handset

on the base to charge for at least 24 hours continuously.

4. When the handset is fully charged, icon will appear steady on

the display. Plug the other end of the telephone line cord (make sure

that one end is already plugged into the base) into the telephone

wall socket.

Connecting the handset and charger

(for multi-pack only)

If you have purchased a multiple pack, you will need to carry out this

process for all the handsets and chargers.

1. Plug the power adaptor into the socket marked on the underside

of the charger and plug the other end into the mains power wall

socket.

2. Remove the battery cover from the back of the handset and insert

the 2 x AAA NiMH rechargeable batteries supplied. Please note the

’+’ and ’-’ markings inside the battery compartment and insert in the

correct direction.

3. Slide the battery cover back into place.

4. If you are charging the batteries for the rst time, place the handset

on the charger to charge for at least 24 hours continuously.

5. When the handset is fully charged, icon will appear steady on the

display. The display will show

HANDSET

and handset number (e.g. 2) to

indicate that it is registered to the base.

You can set different ringer melodies for your internal and external calls.

Choose from 5 different ringer melodies.

You will hear a sample ring as you scroll to each ring melody.

1. Press , scroll to

HANDSET

and press .

2. Press or to select

INT MELODY

EXT MELODY

and press .

3. Press or to select the ringer melody (1 - 5).

4. Press to conrm or to return to the previous menu.

NOTE

If you subscribe to your network providers caller ID service, calls from the

numbers that you have stored in the phonebook will ring using the ringer

melody you have set when you store the entry.

5.3 Auto answer

Your phone is set to answer calls by lifting the handset off the base or

charger. You can switch this feature off so that calls can only be answered

by pressing .

1. Press , scroll to

HANDSET

and press .

2. Scroll to

AUTO ANSWER

and press .

3. Press or to select

OFF

and press to conrm.

5.4 Handset name

If you are using more than one handset with your C1L base, you can set a

personalized name for each handset to easily distinguish between them.

A name can be up to 10 characters long.

1. Press , scroll to

HANDSET

and press .

2. Scroll to

NAME

and press .

3. Enter the new handset name and press to conrm.

Delete the current name by pressing .

NOTE

The handset name will only be displayed for approximately 20 seconds

when no button is pressed. If you make a mistake, press to delete

the last character or digit.

6. Press to delete the number if required, then enter the new

number

and press .

7. Scroll or to select a new ringer melody and press . The

display

shows

ADD ENTRY

8. Enter the next name and number entry you wish to store in your

phonebook or press twice to return to standby.

4.4 Delete an entry

1. Press . The display shows

PHONEBOOK

2. Press . The display shows

ADD ENTRY

3. Scroll to

DELETE ENTRY

and press .

4. Scroll or to the entry you want to delete, or search

alphabetically

and press . The display shows

CONFIRM ?

5. Press to conrm or to cancel.

5. Handset settings

5.1 Handset ringer volume

You can adjust the ringer volume and set different volume levels for your

internal and external calls. Choose from 5 volume levels or Off.

1. Press , scroll to

HANDSET

and press .

2. Press to select or

INT RING VOL

EXT RING VOL

and press .

3. Press to select the volume (1 -5 or OFF) .or

4. Press to conrm or to return to the previous menu.

NOTE

When the phone is ringing, you can adjust the ringer volume by pressing

or .

5.2 Handset ringer melody

Press three times to enter O.

Press once to enter M.

WRITING TIPS

Press to delete the last character or digit.

Press or to move between characters.

Press to insert a space.

Use twice to insert a dash.

4.2 View or dial an entry

1. Press .

icon is displayed.

2. Scroll or to the entry you want.

Enter the rst letter of the name to search alphabetically.

The rst name that starts with this letter or the nearest letter in the

alphabet will be displayed. Scroll or to the entry you want.

3. Press to dial or to return to standby.

NOTE

When the name is displayed, you can switch between the name and

number by pressing .

4.3 Edit a name and number

1. Press . The display shows

PHONEBOOK

2. Press . The display shows

ADD ENTRY

3. Scroll to

MODIFY ENTRY

and press .

4. Scroll or to the entry you want to edit, or search alphabetically

and press . The existing name is displayed.

5. Press to delete the name if required, then enter the new name

and press . The existing number is displayed.

1. Press on the base. All handsets registered to the base will ring.

2. To stop the ringing, press on the base again or press any button

on the handset.

4. Phonebook

You can store up to 50 names and numbers in the phonebook. Names

can be up to 12 characters long and numbers up to 24 digits. You can also

select different ringer melodies for the phonebook entries.

4.1 Store a name and number

If the C1L is connected to a switchboard, you may need to enter a pause in

a stored number. This gives the switchboard time to nd an outside line.

A pause is normally stored after the switchboard access code (e.g. 9).

When storing a number, press and hold until the display shows P.

You can then continue storing the phone number.

If you have subscribed to Caller ID Service and wish to display the name

of your caller instead of the number, save the full telephone number

including the area code to your phonebook.

You can store multiple entries with the same number. However, to prevent

unnecessary duplicated entries, you can only store the same name once.

1. Press . The display shows

PHONEBOOK

2. Press . The display shows

ADD ENTRY

3. Press . The display shows

NAME ?

4. Enter the name and press . The display shows

NUMBER ?

5. Enter the number and press . The display shows

MELODY 1

6. Press or to select the ringer melody you want and press .

The display shows

ADD ENTRY

7. Enter the next name and number entry that you wish to store in your

phonebook or press twice to return to standby.

ENTERING NAMES

Use the keypad letters to enter names, e.g. to store TOM:

Press once to enter T.

4. Press again. The display shows

NAME ?

5. Enter the name and press . The number is displayed.

6. Edit the number if necessary, then press .

7. Press or to select the ringer melody you want and press .

The number is stored.

3.6.3 Delete an entry

1. Press to open the Redial list.

2. Scroll or to the entry you want and press . The display

shows

DELETE ?

3. Press to conrm or to cancel.

3.64 Delete the entire Redial list

1. Press to open the Redial list.

2. Press and hold . The display shows

DELETE ALL ?

3. Press to conrm or to cancel.

3.7 Lock / unlock the keypad

You can lock the keypad so that it cannot be operated accidentally while

carrying it around.

NOTE

When the keypad is locked, you can still answer incoming calls and

operate the handset as normal during the call. When the call ends, the

keypad lock comes on again.

1. Press and hold .

icon is displayed.

2. To unlock the keypad, press any key on your handset. The display

shows

PRESS *

3. Press within 5 seconds.

3.8 Paging / Find handset

You can alert a handset user that they are wanted or locate a

missing handset.

Paging calls cannot be answered by a handset.

NOTE

If there is no answer from the other handset and you wish to return

to your external caller, press .

Your external call resumes automatically after 30 seconds if there is

no answer.

3.5.4 3-way conference call

You can hold a 3-way conference call between 2 internal callers and 1

external caller.

During a call with an external caller:

1. Press followed by the handset number (1-5) that you want to

establish a conference call.

2. When the other handset answers, press to connect all three

callers to begin the conference call. icon is displayed.

3. If there is no answer from the other handset, press to return to

your external caller.

4. Press to end the call.

3.6 Redial

The last 10 entries dialled are stored in the redial list.

3.6.1 View or dial an entry

1. Press to open the Redial list.

2. Scroll or to the entry you want.

3. Press to dial the displayed entry or press to return to

standby.

NOTE

If the caller’s number exactly matches an entry stored in the

phonebook, the name is displayed. Press to see the caller’s number.

3.6.2 Copy a Redial list number to the phonebook

1. Press to open the Redial list.

2. Scroll or to the entry you want.

3. Press . The display shows

ADD ?

2. Getting to know your phone

Overview of your handset

Flashes when battery is almost fully discharged.

1This feature is dependent on your Network Service provider supporting

the service. A subscription fee may be payable.

2For this feature to work, you must subscribe to Caller ID Service from

your network operator. A subscription fee may be payable.

Underside of the base

A Page

In standby mode, press to ring the handset(s).

Press and hold to enter registration mode when registering handsets.

Navigating the menus

Your C1L has an easy to use menu system.

Each menu has a list of options, which you can see on the menu map on

the following page.

When the handset is switched on and in standby:

1. Press to open the main menu.

2. Then use or buttons to scroll through the available options.

3. Press to select an option. To return to the previous menu level,

press . To exit the menu and return to standby, press .

NOTE

If no buttons are pressed for 20 seconds, the handset returns to standby

automatically.

Handset LCD Display

Flashes to indicate an incoming external call.

External call in progress.

Flashes to indicate an incoming internal call.

Internal call in progress.

3-way call in progress or transfer an external call to another C1L

handset registered to the base.

Eco mode is ON.

Flashes to indicate new voicemail messages received. Off when you

have no voicemail messages.1

Indicates signal strength.

Flashes when handset is not registered to the base or if you go out of

range.

Menu is opened.

Phonebook is opened.

Flashes to indicate new calls list entries received.2

Answered call (when viewing the Calls list).2

Unanswered call (when viewing the Calls list).2

Keypad is locked.

Displayed number is longer than 12 digits.

The approximate power levels of your battery are indicated as follows:

Battery is fully charged.

Battery is partially charged.

Battery is running low.

Menu map

PHONEBOOK HANDSET DATE -- TIME

ADD ENTRY BEEP DATE SET

MODIFY ENTRY INT RING VOL CLOCK SET

DELETE ENTRY ALARM SETEXT RING VOL

SETUP INT MELODY REGISTER

DEL HANDSET EXT MELODY SELECT BASE

PIN CODE AUTO ANSWER REG BASE

DIAL MODE NAME

RECALL LANGUAGE

DEFAULT KEYLOCK ?

ECO MODE

3. Using the phone

NOTE

Your handset will automatically time the duration of all external calls. The

call timer will display after the rst 15 seconds of your call. When the call

ends, the total duration of your talk time is shown for 5 seconds.

3.1 Switch the handset on / off

Press and hold to switch the handset on or off.

3.2 Calls

3.2.1 Make a call

1. Press .

2. When you hear the dial tone, dial the number.

3.2.2 Preparatory dialling

1. Dial the number rst. If you make a mistake press to delete the

last digit.

2. Press to dial.

3.2.3 End a call

Press , or place the handset back on the base or charger.

3.2.4 Receive a call

When you receive an external call, the phone rings and icon ashes

on the display.

1. If the handset is off the base then press to answer the call, or if

the handset is on the base simply lift the handset to answer the call.

NOTE

If you prefer to press when you lift up the handset to answer a call,

you will need to switch Auto answer off.

3.3 Adjust the earpiece volume

During a call, press or to increase or decrease the volume. There are

5 levels to choose from.

3.4 Mute

You can mute your handset so that you can talk to someone nearby

without your caller hearing.

1. During a call, press . The display shows

MUTE

and your caller

cannot hear you.

2. Press again to resume your call.

3.5 Intercom

3.5.1 Make an internal call

If you have more than one handset registered to the base, you can make

internal calls between two handsets.

icon is displayed to indicate an internal call.

1. Press followed by the number (1-5) of the handset you want

to call.

3.5.2 Receive an internal call

When you receive an internal call, icon ashes and the handset

number that is calling you is displayed.

1. Press to answer the call.

3.5.3 Transfer a call

You can transfer an external call to another handset registered to the base.

During an external call:

1. Press followed by the handset number (1-5) that you want to

transfer to.

2. When the other handset answers, press to complete the transfer.

1. Getting started

IMPORTANT

Do not place your C1L in the bathroom or other humid areas.

Location

You need to place your C1L base within 1.5 metres of the mains power

and telephone wall socket so that the cables will reach. The socket-outlet

should be installed near the equipment and should be easily accessible.

Make sure that it is at least 1 metre away from other electrical appliances

to avoid interference. Your C1L works by sending radio signals between

the handset and base. The strength of the signal depends on where you

place the base. Placing it as high as possible ensures the best signal.

HANDSET RANGE

The unit has a range of up to 300 metres outdoor s when there is a clear

line of sight between the base and handset. Any obstruction between the

base and handset will reduce the range signicantly. With the base indoors

and the handset either indoors or outdoors, the range will normally be up

to 50 metres. Thick concrete and stone walls can severely affect the range.

SIGNAL STRENGTH

The icon on your handset indicates that you are within range of the

base. When out of range of the base, the icon ashes. If you are on a

call, you will hear a warning beep.

The line will hang up if the handset moves out of range of the base. Move

closer to the base. The handset will automatically reconnect to the base.

Setting up

IMPORTANT

The base station must be plugged into the mains power at all times. Do

not connect the telephone line cord into the wall socket until the handset

is fully charged. Use only the power adaptor and telephone line cord

supplied with the product.

Connecting the base

1. Plug the telephone line cord into the socket marked on the

underside of the base.

2. Plug the power adaptor into the socket marked on the underside

of the base and plug the other end into the mains power wall socket.

This user guide provides you with all the information you

need to get the most from your phone.

To set up your phone, follow the simple instructions in

‘Getting Started’, on the next few pages.

IMPORTANT

Only use the telephone line cord supplied.

Got everything?

• C1L base & cordless handset

• 2 x rechargeable Ni-MH battery cells

• Power adaptor for the base

• Telephone line cord

If you have purchased a C1L multiple pack you will also have the

following additional items:

• Cordless handset & charger

• 2 x rechargeable Ni-MH battery cells

• Power adaptor for the charger

ECOMOTO: a convergence of efforts by marketing, design, research,

engineering and supply chain management that leads to better

products for everyone. A holistic view that focuses on both social and

environmental responsibility. A passion and a shared point of view.

The right thing to do.

• Meets and / or exceeds EMEA environmental regulatory

requirements.

• Eco friendly packaging with a minimum 20% post consumer recycled

content.

• Phone housing is built with a minimum of 25% post consumer

recycled content plastic.

• Energy efcient charger that meets EU Code of Conduct

requirements.

• ECO mode function which reduces the transmitted power and energy

consumption.

Welcome...

to your new Motorola C1L Digital Cordless

Telephone!

• All handsets are fully cordless for locating anywhere within range.

• 50 Name and Number phonebook.

• Caller ID shows you who’s calling and see details of the last 40 callers

in a Calls list.1

• Redial up to 10 of the last numbers called.

• Register up to 5 handsets to a single base and register each handset

with up to 4 different bases.

• Make internal calls and transfer external calls between handsets.

• Choose from 5 different ringtones for internal and external calls as

well as numbers stored in the phonebook.

Please note that this equipment is not designed for making

emergency telephone calls when the power fails. Alternative

arrangements should be made for access to emergency services.

Need help?

If you have any problems setting up or using your C1L, please

contact Customer Services on XXXX XXXXXXX.

Alternatively, you may nd the answer in the ‘Help’ section at the

back of this guide.

1You must subscribe to your network provider’s Caller ID or Call

Waiting service for these features to work. A subscription fee may

be payable.

Technical Information

How many telephones can I have?

All items of telephone equipment have a Ringer Equivalence Number

(REN), which is used to calculate the number of items which may be

connected to any one telephone line. Your C1L has a REN of 1. A total

REN of 4 is allowed. If the total REN of 4 is exceeded, the telephones may

not ring. With different telephone types, there is no guarantee of ringing,

even when the REN is less than 4.

Any additional handsets and chargers that you register have a REN of 0.

Connecting to a switchboard

This product is intended for use within Europe for connection to the

public telephone network.

Recall

You may need to use the recall function if you are connected to a switch.

Contact your PABX supplier for further information.

Manufactured, distributed or sold by Suncorp Technologies Ltd., ofcial

licensee for this product. MOTOROLA and the Stylized M Logo are

trademarks or registered trademarks of Motorola Trademark Holdings,

LLC. and are used under license. All other trademarks are the property

reserved.

Version 3 (EU)

IMPORTANT

Warning! Use only the approved rechargeable Ni-MH battery cells (2 x

AAA Ni-MH 300mA rechargeable batteries) supplied with your C1L.

BATTERY LOW WARNING

If icon ashes on the display and you hear a warning beep every

minute during a call, you will need to recharge the handset before you

can use it again.

When charging, icon will scroll on the display.

BATTERY PERFORMANCE

In ideal conditions, fully charged batteries should give up to 6.5 hours talk

time or up to 135 hours standby time on a single charge.

Note that new batteries do not reach their full capacity until they have

been put to normal use for several days.

To keep your batteries in the best condition, leave the handset off the

base for a few hours at a time.

Running the batteries right down at least once a week will help them last

as long as possible.

The charge capacity of rechargeable batteries will reduce with time as

they wear out, giving the handset less talk / standby time. Eventually they

will need to be replaced.

After charging your handset for the rst time, subsequent charging time is

about 6–8 hours a day. Batteries and handset may become warm during

charging. This is normal.

1All talk and standby times are approximate and depend on features

selected and usage pattern.

Date and time

If you have subscribed to a Caller ID Service, the date and time is set

automatically for all handsets when you receive your rst call.

If you do not have a Caller ID service, you can set the date and time

manually, see section “7. Clock & Alarm”.

Your C1L is now ready for use.

EarpieceDisplay

During a call, press to

increase earpiece volume.

When the phone is

ringing, press to increase

the handset ringer

volume.

Press to scroll through

the menu options, redial

list, calls list and

phonebook entries.

Menu / OK / Mute

Press to open the

Menu.

Press to select menu

options and to

conrm a displayed

option.

During a call, press to

turn mute on / off.

Talk

Press to make and

receive calls.

Keypad lock / * /

Switch from Pulse to

Tone

Press and hold to lock

the keypad.

To unlock, press any

key and follow the on

screen instructions.

Dial a *.

During a call, press

and hold to switch

from pulse dialling to

tone dialling.

Recall

Use with switchboard /

PABX services and some

network services.

Redial

In standby mode,

press to open the

redial list.

Phonebook / Delete / Back

In standby mode, press to

open the phonebook menu.

In editing mode, press to

delete characters and digits.

Go back to the previous

menu level.

Calls list / Down

In standby mode, press to

open the calls list.

During a call, press to

decrease earpiece volume.

When the phone is ringing,

press to decrease the

handset ringer volume.

Press to scroll through the

menu options, redial list,

calls list and phonebook

entries.

End Call / Exit / Switch

Handset on / off

Press to end a call.

When viewing the redial /

calls list / phonebook or

when in the menu, press to

exit and return to standby.

Press and hold for 3

seconds to switch the

handset on / off.

Pause / #

Press and hold to enter

a pause (P) when

pre-dialling or storing

numbers.

Dial a #.

Intercom

Used to make internal

calls and transfer calls

to other C1L handsets

registered to the base.

Microphone

Battery

status

Scrolls

when

charging

Time or Handset name

In standby mode, press and hold to switch handset

idle screen between handset name or time.

Eco mode

Circle around

appears when

Eco mode is ON

Warning:

Charge the handset for 24 hours before use.

Motorola C1L

For C1001L, C1002L, C1003L and C1004L

Digital Cordless Telephone

seller of the Product; (c) if a warranty card was included in your box, a

completed warranty card showing the serial number of the Product; (d)

a written description of the problem; and, most importantly; (e) your

address and telephone number.

Exclusions

Normal Wear and Tear. Periodic maintenance, repair and replacement of

parts due to normal wear and tear are excluded from coverage.

Batteries. Only batteries whose fully charged capacity falls below 80%

of their rated capacity and batteries that leak are covered by this limited

warranty.

Abuse & Misuse. Defects or damage that result from: (a) improper

operation, storage, misuse or abuse, accident or neglect, such as physical

damage (cracks, scratches, etc.) to the surface of the product resulting

from misuse; (b) contact with liquid, water, rain, extreme humidity or

heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use

of the Products or Accessories for commercial purposes or subjecting

the Product or Accessory to abnormal usage or conditions; or (d) other

acts which are not the fault of Motorola or SUNCORP are excluded from

coverage.

Use of Non-Motorola branded Products and Accessories. Defects or

damage that result from the use of Non-Motorola branded or certied

Products or Accessories or other peripheral equipment are excluded from

coverage.

Unauthorized Service or Modication. Defects or damages resulting

from service, testing, adjustment, installation, maintenance, alteration, or

modication in any way by someone other than Motorola, SUNCORP or

its authorized service centers, are excluded from coverage.

Altered Products. Products or Accessories with (a) serial numbers or date

tags that have been removed, altered or obliterated; (b) broken seals or

that show evidence of tampering; (c) mismatched board serial numbers;

or (d) nonconforming or non-Motorola branded housings, or parts, are

excluded from coverage.

Communication Services. Defects, damages, or the failure of Products

or Accessories due to any communication service or signal you may

subscribe to or use with the Products or Accessories is excluded from

coverage.

How to Obtain Warranty Service or Other Information?

To obtain service or information, please call: XXXX XXXXXX.

You will receive instructions on how to ship the Products or Accessories at

your expense and risk, to a SUNCORP Authorized Repair Center.

To obtain service, you must include: (a) the Product or Accessory; (b) the

original proof of purchase (receipt) which includes the date, place and

Products or Accessories that do not conform to this limited warranty. We

may use functionally equivalent reconditioned / refurbished / pre-owned

or new Products, Accessories or parts.

What Other Limitations Are There?

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF

THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT

PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE

EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU

OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT

SHALL MOTOROLA OR SUNCORP BE LIABLE, WHETHER IN CONTRACT

OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF

THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY, OR FOR ANY

INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF

ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS,

LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT

OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE

PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES

MAY BE DISCLAIMED BY LAW.

Some jurisdictions do not allow the limitation or exclusion of incidental

or consequential damages, or limitation on the length of an implied

warranty, so the above limitations or exclusions may not apply to you.

This warranty gives you specic legal rights, and you may also have other

rights that vary from one jurisdiction to another.

Products Covered Length of Coverage

Consumer Products One (1) year from the date of the

products original purchase by the

rst consumer purchaser of the

product.

Consumer Accessories (battery,

power supply(s) and line cords)

Ninety (90) days from the date of

the accessories original purchase

by the rst consumer purchaser of

the product.

Consumer Products and

Accessories that are Repaired or

Replaced

The balance of the original

warranty or for ninety (90) days

from the date returned to the

consumer, whichever is longer.

generate bres, or place it in locations preventing the free ow of air

over its surfaces.

• Do not submerge any part of your product in water and do not use it

in damp or humid conditions, such as bathrooms.

• Do not expose your product to re, explosives or other hazardous

conditions.

• There is a slight chance that your phone could be damaged by an

electrical storm. We recommend that you unplug the power and

telephone line cord during an electrical storm.

Product disposal instructions

Product disposal instructions for residential users

When you have no further use for it, please remove any batteries and

dispose of them and the product according to your local authority’s

recycling processes. For more information, please contact your local

authority or the retailer where the product was purchased.

Product disposal instructions for business users

Business users should contact their suppliers and check the terms and

conditions of the purchase contract and ensure that this product is not

mixed with other commercial waste for disposal.

Consumer Products and Accessories Warranty

Thank you for purchasing this Motorola branded product manufactured

under license by Suncorp Technologies Limited, 3001-3005 China

Resources Building, 26 Harbour Road, Wan Chai, Hong Kong.

(“SUNCORP”)

What Does this Warranty Cover?

Subject to the exclusions contained below, SUNCORP warrants that

this Motorola branded product (“Product”) or certied accessory

(“Accessory”) sold for use with this product that it manufactured to be

free from defects in materials and workmanship under normal consumer

usage for the period outlined below. This Limited Warranty is your

exclusive warranty and is not transferable.

Who is covered?

This warranty extends only to the rst consumer purchaser, and is not

transferable.

What will SUNCORP do?

SUNCORP or its authorized distributor at its option and within a

commercially reasonable time, will at no charge repair or replace any

damage and will often require extensive work to restore the product

to normal operation.

• Clean this product with a soft, damp cloth. Do not use chemicals or

cleaning agents to clean this phone.

• Use only the power supply that came with this unit. Using other

power supplies may damage the unit.

• Because this phone operates on electricity, you should have at least

one phone in your home that could operate without electricity in the

case the power in your home goes out.

• To avoid interference to nearby appliances, do not place the base of

the phone on or near a TV, microwave oven, or VCR.

Battery Safety Instructions

• Do not burn, disassemble, mutilate, or puncture the battery. The

battery contains toxic materials that could be released, resulting in

injury.

IMPORTANT

There is a risk of explosion if you replace the battery with an incorrect

battery type. Use only the batteries that came with your phone or an

authorized replacement recommended by the manufacturer.

• Keep batteries out of the reach of children.

• Remove batteries if storing over 30 days.

• Do not dispose of batteries in re, which could result in explosion.

• The rechargeable batteries that power this product must be disposed

of properly and may need to be recycled. Refer to your battery’s

label for battery type. Contact your local recycling center for proper

disposal methods.

SAVE THESE INSTRUCTIONS

Cleaning

• Clean the handset and base (or charger) with a damp (not wet) cloth,

or an anti-static wipe.

• Never use household polish as this will damage the product. Never

use a dry cloth as this may cause static shock.

Environmental

• Do not expose to direct sunlight.

• The handset may become warm when the batteries are being

charged or during prolonged periods of use. This is normal. However,

we recommend that to avoid damage, do not place the product on

antique / veneered wood.

• Do not place your product on carpets or other surfaces which

• Do not use this product near water (for example, near a bath tub,

kitchen sink, or swimming pool).

• Do not allow anything to rest on the power cord. Place the power

cord so that it will not be walked on.

• Never insert objects of any kind into the product vents as that may

result in re or electric shock.

• Unplug this product from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

• Do not disassemble this product. If service or repair work is required,

contact the customer service helpline found in this user’s Guide.

• Do not overload wall outlets and extension cords.

• Avoid using during an electrical storm. Use a surge protector to

protect the equipment.

• Do not use this phone to report a gas leak, especially if you are in the

vicinity of the gas line.

IMPORTANT

To reduce the risk of re, use only the supplied power adaptor.

Unplug this cordless phone immediately from an

outlet if:

• The power cord or plug is damaged or frayed.

• Liquid has been spilled on the product.

• The product has been exposed to rain or water. Do not retrieve the

handset or base until after you have unplugged the power and phone

from the wall. Then retrieve the unit by the unplugged cords.

• The product has been dropped or the cabinet has been damaged.

• The product exhibits a distinct change in performance.

Installation Guidelines

• Read and understand all instructions and save them for future

reference.

• Follow all warnings and instructions marked on the product.

• Do not install this product near a bath tub, sink, or shower.

• Operate this phone using only the power source that is indicated

on the marking label. If you are unsure of the power supply to your

home, consult with your dealer or local power company.

• Do not place this product on an unstable cart, stand, or table. This

product may fall, causing serious damage to the product.

• Adjust only those controls that are covered by the operating

instructions. Improper adjustment of other controls may result in

• The record cannot be found in your phonebook. Check that you have

the correct name / number stored in your phonebook, with the full

area code.

I have forgotten my PIN!

• Restore your C1L to its default settings, see “6.7 Emergency default”,.

Cannot register a handset to the base

• You can register up to a maximum of 5 handsets to a C1L base. You

must de-register a handset in order to register a new one.

• Check that you have entered the correct PIN code (default = 0000).

• Check that you are at least one metre away from other electrical

equipment to avoid interference when registering.

Handset does not ring

• The handset ringer volume may be set to Off.

Noise interference on my phone or on other electrical

equipment nearby

• Place your C1L at least one metre away from electrical appliances or

any metal obstructions to avoid any risk of interference.

Answering machine will not record new messages

• Is the recording memory full? Play and delete messages.

• Is the OGM set to Answer Only? Change the OGM to Answer &

Record.

11. General information

IMPORTANT

This equipment is not designed to make emergency telephone calls when

the power fails. Alternative arrangements should be made for access to

emergency services.

This product is intended for connection to analogue public switched

telephone networks and private switchboards in Europe.

Important safety instructions

Follow these safety precautions when using your phone to reduce the risk

of re, electric shock, and injury to persons or property:

• Keep all slits and openings of the phone unblocked. Do not set the

phone on a heating register or over a radiator. Ensure that proper

ventilation is provided at the installation site.

• Do not use while wet or while standing in water.

2. Scroll to

DEL HANDSET

and press .

3. Enter the 4 digit PIN code (default = 0000) and press .

4. Enter the handset number that you want to de-register. You will hear a

conrmation beep and the display will return to the previous menu.

10. Help

No dial tone

• Use only the telephone line cord supplied.

• Check that the telephone line cord is connected properly.

• Check that the mains power is connected properly and switched on.

No display

• Check that the batteries are inserted correctly and fully charged. Use

only approved rechargeable batteries supplied.

• Check that the handset is switched on. Press and hold .

• Reset the base by removing the batteries and disconnecting the

mains power. Wait for around 15 seconds before connecting it again.

Allow up to one minute for the handset and base to synchronize.

icon ashes

• Handset is out of range. Move closer to the base.

• Make sure that the handset is registered to the base.

• Check that the mains power is connected properly and switched on.

Keypad does not seem to work

• Check that the keypad lock is not on.

icon is not scrolling during charge

• Adjust the handset slightly on the base.

• Clean the charging contacts with a cloth moistened with alcohol.

• Check that the mains power is connected properly and switched on.

• The battery is full. When the handset is fully charged, icon will

appear steady on the display.

No Caller ID

• Check your subscription with your network operator.

• The caller may have withheld their number.

9.2 Register a different make of handset to your C1L base

IMPORTANT

DECT GAP Prole only guarantees that basic calling functions will work

correctly between different makes / types of handset and base. There is a

possibility that certain features such as Caller ID will not work correctly.

On the base:

1. Press and hold for 3 seconds until you hear two beeps. The base

will remain in registration mode for 90 seconds.

On the handset:

Follow the registration instructions given in your handset’s user guide.

9.3 Select a base

If your C1L handset is registered to more than one base (e.g. one at work

and one at home), you can select which base to use.

Each handset can be registered with up to four bases.

1. Press , scroll to

and press . The display shows

SELECT BASE

2. Press . All the bases that your handset has been registered to

will be displayed, e.g.

BASE 1 2 3 4

. The currently selected base number

ashes.

3. Enter the base number that you want to use. Alternatively, press

or to scroll to

AUTO

4. Press to conrm. You will hear a conrmation beep and the

display will return to standby.

NOTE

If you select

AUTO

, your handset will automatically search for and connect

to the base with the strongest signal.

9.4 De-register a handset

Use one handset to de-register another. You cannot de-register the handset

that you are using.

1. Press , scroll to

SETUP

and press .

If you have purchased an additional handset separately, you must register

it to your C1L base before it can be used.

9.1 Registering an additional handset

NOTE

Handset batteries must be fully charged before you start to register. Hold

your handset close to the base during the registration process. Handsets

that were supplied with your C1L base are already pre-registered.

On the base:

1. Press and hold for 3 seconds until you hear two beeps. The base

will remain in registration mode for 90 seconds.

On the handset:

1. Press , scroll to

and press .

2. Scroll to

REG BASE

and press .

3. Enter the base number (1 - 4).

The base numbers that are already in use ash.

4. The display shows

SEARCHING...X

, where

indicates the base

identication number.

5. The display will ask for the PIN to be entered. Enter the 4 digit PIN

code (default = 0000) and press . You will hear a beep if the

registration is successful. The handset is automatically assigned an

available handset number. Use this number when making internal

calls.

NOTE

If registration is not successful the rst time, please repeat the process

again in case the base registration period ran out of time. If the base is not

found after a few seconds, the handset returns to standby. Try registering

again.

If there are already 5 handsets registered to the base, the registration

will fail. You must de-register another handset before you can register a

new one.

8.2.2 Dial a number in the Calls list

1. Press to open the Calls list.

2. Scroll or to the entry you want.

3. Press to dial the displayed entry.

8.2.3 Copy a Calls list number to the phonebook

1. Press to open the Calls list.

2. Scroll or to the entry you want.

3. Press repeatedly until the display shows

ADD ?

4. Press again. The display shows

NAME ?

5. Enter the name and press . The number is displayed.

6. Edit the number if necessary, then press .

7. Press or to select the ringer melody you want and press .

The number is stored.

8.2.4 Delete an entry

1. Press to open the Calls list.

2. Scroll or to the entry you want and press . The display

shows

DELETE ?

3. Press to conrm or to cancel.

8.2.5 Delete the entire Calls list

1. Press to open the Calls list.

2. Press and hold . The display shows

DELETE ALL ?

3. Press to conrm or to cancel.

9. Using additional handsets

You can register up to ve handsets to your C1L base to extend your

phone system without having to install extension sockets for each new

phone.

Each C1L handset can be registered with up to four bases. You can then

select the base you prefer to use. If you have purchased a C1L multiple

pack, all additional handsets come pre-registered to the base.

caller’s number on your handset (provided it is not withheld) prior to

answering the call. The display can show the rst 12 digits or characters of

the phone numbers and names.

If your caller’s name and number are stored in the phonebook and a

number match is found, you will see the caller’s name on the display

instead.

8.2 Calls list

The Calls list stores details of your last 40 received calls, including the

phone number and date and time of the call.

The Calls list also alerts you when you have unanswered calls.

The caller’s details are stored in the Calls list whether or not you have

answered the call. The list is shared by all handsets registered to the base.

When the list is full, and a new call is received, the oldest entry will be

deleted automatically.

When a new call is received in the Calls list, icon will ash on the

display in standby mode to alert you. When you have viewed the new call,

icon disappears but icon will remain.

8.2.1 View the Calls list

1. Press to open the Calls list. If there are no calls in the list, the

display shows

EMPTY

2. Press or to scroll through the list.

• If the call was answered, icon is displayed as you scroll to

the entry. If the call was unanswered, icon is displayed as you

scroll to the entry. When you reach the end of the list, the handset

will beep.

• f the caller’s number exactly matches an entry stored in the

phonebook, the display will alternate between the name and the

number. Press to see the caller’s number.

• If the telephone number is longer than 12 digits, icon is

displayed. Press to see the remaining digits.

• Press again to see the time and date of the call.

• Press again to access the option to store the entry in your

phonebook.

7.2 Set the time

1. Press , scroll to

DATE -- TIME

and press .

2. Scroll to

CLOCK SET

and press .

3. Enter the time in 24 hour format (e.g. 18--30 for 6:30pm) and press

to conrm.

7.3 Set alarm

Each handset can have a different alarm setting.

1. Press , scroll to

DATE -- TIME

and press .

2. Scroll to

ALARM SET

and press .

3. Press or to select

OFF

and press to conrm.

4. If you select

, enter the time in 24 hour format (e.g. 07--30 for

7:30am) and press to conrm.

7.4 Switch off alarm ring

When the alarm sounds, press any button to switch it off.

NOTE

If you are using the handset to make a call when the alarm ring is due, you

will hear a beep in the earpiece.

8. Caller ID and the Calls list

IMPORTANT

To use Caller ID, you must rst subscribe to the service from your network

provider. A subscription fee may be payable.

To ensure that the caller’s name is displayed, make sure you have stored

the full telephone number, including the area code in the phonebook.

If the call is a withheld call,

WITHHELD

will be displayed.

If the number is unavailable,

UNAVAILABLE

will be displayed.

If the call is from an international number,

INT’L

will be displayed.

If the call is from the operator,

OPERATOR

will be displayed.

If the call is from a payphone,

PAYPHONE

will be displayed.

If the call is from a ringback request,

RINGBACK

will be displayed.

8.1 Caller ID

If you have subscribed to a Caller ID Service, you will be able to see your

and energy consumption when switched on.

To switch Eco mode on:

1. Press , scroll to

SETUP

and press .

2. Scroll to

ECO MODE

and press .

3. Press or to select

OFF

and press to conrm.

NOTE

When ECO mode is set to ON, the handset range will be reduced.

On the handset display when ECO mode is switch off the circle around the

disappears.

6.7 Default settings

Low battery beeps ON Calls list Empty

Out of range warning beeps ON Redial list Empty

Key beep ON PIN code 0000

Auto answer ON Dial mode Tone

Internal melody 1 Recall mode TIMED

BR, 1 (100

ms)

Internal volume 3 Eco mode OFF

External melody 3 Keypad lock OFF

External volume 3 Answering machine ON

Ear volume 2 Answer delay 6 rings

Phonebook Empty

7. Clock & alarm

If you have subscribed to Caller ID Service, the date and time will be set

on all your handsets whenever a call is received. You can also manually set

the date and time on the individual handsets.

7.1 Set the date

1. Press , scroll to

DATE -- TIME

and press . The display shows

DATE SET

2. Press to select.

3. Enter the date (e.g. 12--08 for 12th of August) and press to

conrm.

6.3 Recall mode

Depending on your country and network operator, your C1L has the recall

time set as 100 ms (TIMED BR,1). It is unlikely that you need to change this

setting unless advised to do so.

1. Press , scroll to

SETUP

and press .

2. Scroll to

RECALL

and press .

3. Press or to select

TIMED BR,1

(short ash time) or

TIMED BR,2

(long

ash time) and press to conrm.

6.4 Restore default settings

You can restore your C1L to its default (original) settings.

All the handsets that are registered to the base will be retained.

IMPORTANT

Resetting your phone to its default settings will delete all entries in the

Phonebook and Calls list. All handset and base settings will also be reset.

1. Press , scroll to

SETUP

and press .

2. Scroll to

DEFAULT

and press .

3. Enter the 4 digit PIN code (default = 0000) and press . The

display shows

CONFIRM ?

4. Press to conrm or to return to the previous menu. Your

C1L will restart automatically.

6.5 Emergency default

If you have lost your PIN code, you can still restore your C1L to its

default settings.

1. Remove the batteries from the handset.

2. Press and hold while replacing the batteries. The display

shows

DEFAULT.

3. Press to conrm. Your C1L will restart automatically.

6.6 Eco mode

Your C1L offers ECO mode function which reduces the transmitted power

5.9 Keypad lock using the menu

You can use the menu to lock the keypad.

1. Press , scroll to

HANDSET

and press .

2. Scroll to

KEYLOCK ?

and press to conrm.

icon is displayed.

NOTE

To unlock the keypad, press any button on the keypad, then press

within 5 seconds.

6. Base settings

6.1 Change base PIN code

Some functions are protected by a 4 digit PIN code which must be entered

if you want to change the settings. The default PIN is 0000. You can change

this to your own preferred number.

When you enter a PIN, the digits are shown as ****.

1. Press , scroll to

SETUP

and press .

2. Scroll to

PIN CODE

and press .

3. Enter the 4 digit PIN code (default = 0000) and press .

4. Enter the new PIN and press to conrm.

5. The display shows

RETYPE

. Re-enter the new PIN and press

to conrm.

IMPORTANT

If you change the PIN code, please keep a record of the new number.

6.2 Dial mode

Your C1L is set to tone dialling. You should only need to change this if

connected to an older type of switchboard / PBX which requires

pulse dialling.

1. Press , scroll to

SETUP

and press .

2. Scroll to

DIAL MODE

and press .

3. Press or to select

TONE DIAL

PULSE DIAL

and press to

5.5 Language

1. Press , scroll to

HANDSET

and press .

2. Scroll to

LANGUAGE

and press .

3. Press or to select your preferred language and press

to conrm.

5.6 Key beep

When you press a button on the handset keypad, you will hear a beep.

You can switch these beeps on or off.

1. Press , scroll to

HANDSET

and press . The display shows

BEEP

2. Press to select. The display shows

KEYTONE

3. Press to select.

4. Press or to select

OFF

and press to conrm.

5.7 Battery low warning beep

When the battery is almost fully discharged, you will hear a warning beep

every minute during a call. You can switch these beeps on or off.

1. Press , scroll to

HANDSET

and press . The display shows

BEEP

2. Press to select.

3. Scroll to

LOW BATTERY

and press .

4. Press or to select

OFF

and press to conrm.

5.8 Out of range warning beep

If the handset goes out of range, you will hear warning beeps during a

call. You can switch these beeps on or off.

1. Press , scroll to

HANDSET

and press . The display shows

BEEP

2. Press to select.

3. Scroll to

OUT RANGE

and press .

4. Press or to select

OFF

and press to conrm.

Product specificaties

Merk:	Motorola
Categorie:	Draadloze DECT telefoons
Model:	C1004L

Heb je hulp nodig?

Als je hulp nodig hebt met Motorola C1004L stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Draadloze DECT telefoons Motorola

Motorola CD401-B Handleiding

23 December 2022

Motorola CD501-B Handleiding

23 December 2022

Motorola CD401-HS Handleiding

23 December 2022

Motorola AXH Handleiding

23 December 2022

Motorola L502BT Handleiding

23 December 2022

Motorola CD501-C Handleiding

23 December 2022

Motorola CD5011 Handleiding

23 December 2022

Motorola L706C Handleiding

23 December 2022

Motorola CD4014 Handleiding

23 December 2022

Motorola L304 Handleiding

23 December 2022

Handleiding Draadloze DECT telefoons

Nieuwste handleidingen voor Draadloze DECT telefoons

IDECT X2i Handleiding

16 Oktober 2023

IDECT X3i Handleiding

16 Oktober 2023

ITT DP 27 Handleiding

10 Oktober 2023

ITT DP29 Handleiding

10 Oktober 2023

Orchid LR4620T Handleiding

4 Oktober 2023

Sweex IP004 Handleiding

27 September 2023

Mitel 5224 Handleiding

15 September 2023

Phonak Dect II Handleiding

10 September 2023

Auro DECT 5011 Handleiding

6 September 2023

RTX Dualphone 3088 Handleiding

28 Augustus 2023