MOTA SmartWatch G2 Handleiding

MOTA Smartwatch SmartWatch G2

Lees hieronder de 📖 handleiding in het Nederlandse voor MOTA SmartWatch G2 (2 pagina's) in de categorie Smartwatch. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

CHARGING

MOTA® SmartWatch comes with a built-in

rechargeable battery. Before the rst use,

please charge your SmartWatch fully for

approximately 2 hours.

How to Charge

To begin charging, insert the charging cable

into the SmartWatch and connect the other

end to your computer’s USB port or other USB

power source (such as USB wall adapter).

The charging port is a 3.5 mm standard

two-in-one, which can be used for charging,

or using a headphone to listen to audio from

the SmartWatch.

Charging Time

Charging time is approximately 2 hours.

When your SmartWatch is nished

charging, the battery symbol on the screen

will indicate full.

Charge Indication

When charging, the number of power grids

displayed on the Screen will increase until

SmartWatch is fully charged.

Stand-by Time

The stand-by time is approximately 72 hours.

Note: Vibrating and screen display usage

will aect the stand-by time.

Low Battery Notication

When the battery level is low, “Low

Battery” will be displayed on the screen.

POWER

Power ON: Press and hold the power button

(A) for 3 seconds, until “Power on” is

displayed.

Power OFF: Press and hold the power button

(A) for 3 seconds, until “Power o” is

displayed.

SET TIME

With SmartWatch in power on status, press

button (B) for 3 seconds in order to set

the time. The hour digits will begin ashing.

Continue pressing (A) until the desired hour

is shown. Press (B) to advance to set the

minute.

Continue pressing (A) until the desired

minute is shown.

Presss button (B) to save and exit time

setting.

T nha k you f yor our purchas OTe of M A®

SmartWatch. For any questions, y may reaou ch

MOTA® support via www.mota.com/support/

FUNCTION OVERVIEW

CHARGING

MOTA® SmartWatch comes with a built-in

rechargeable battery. Before the rst use,

please charge your SmartWatch fully for

approximately 2 hours.

How to Charge

To begin charging, insert the charging cable

into the SmartWatch and connect the other

end to your computer’s USB port or other USB

power source (such as USB wall adapter).

The charging port is a 3.5 mm standard

two-in-one, which can be used for charging,

or using a headphone to listen to audio from

the SmartWatch.

Charging Time

Charging time is approximately 2 hours.

When your SmartWatch is nished

charging, the battery symbol on the screen

will indicate full.

Charge Indication

When charging, the number of power grids

displayed on the Screen will increase until

SmartWatch is fully charged.

Stand-by Time

The stand-by time is approximately 72 hours.

Note: Vibrating and screen display usage

will aect the stand-by time.

Low Battery Notication

When the battery level is low, “Low

Battery” will be displayed on the screen.

POWER

Power ON: Press and hold the power button

(A) for 3 seconds, until “Power on” is

displayed.

Power OFF: Press and hold the power button

(A) for 3 seconds, until “Power o” is

displayed.

SET TIME

With SmartWatch in power on status, press

button (B) for 3 seconds in order to set

the time. The hour digits will begin ashing.

Continue pressing (A) until the desired hour

is shown. Press (B) to advance to set the

minute.

Continue pressing (A) until the desired

minute is shown.

Press button (B) to save and exit time

setting.

T nha k you f yor our purchas OTe of M A®

SmartWatch. For any questions, y may reaou ch

MOTA® support via www.mota.com/support/

FUNCTION OVERVIEW

PAIR

Keep MOTA SmartWatch within 5ft of your

phone. Please ensure the SmartWatch is OFF.

Press and continue to hold the power button

(A) for 10 seconds until SmartWatch turns ON

and “Pairing” is shown on screen.

Access the Bluetooth menu on your phone to

search for devices.

Choose “Bracelet.”

If prompted for password, enter “0000”.

Complete the pairing process per your

phone’s instructions.

SmartWatch will then show the current time

and a headphone icon will be displayed to

indicate a successful connection.

Press and hold buttons (A) and (B) for 3

seconds to sync your contacts.

INCOMING CALL

When you receive a phone call, the

SmartWatch will vibrate and display the

caller’s name or number.

When receiving a call, press (A) or (B) to

answer the call. “Active Call” will be

displayed, you are now connected.

To reject/hang-up the incoming call, press

the power button (A) for 2 seconds. “Hang

up” will be displayed.

During conversation, press (B) to increase

volume, press (A) to decrease volume.

Double click (A) / (B) to re-dial the last

person you called.

RE-PAIR

When you restart your SmartWatch, you may

need to re-pair it to your phone. Please follow

PAIR instructions noted previously.

RESET

To un-pair your SmartWatch, please refer to

your phone’s instructions for un-pairing from

a Bluetooth device.

SAFETY GUIDELINES

Do not put the SmartWatch into liquid or

expose to high humidity environments.

Do not wash the SmartWatch.

Do not expose the SmartWatch to extreme

temperature (high or low).

Do not attempt to open the SmartWatch,

as this is not safe and may void your

warranty.

SPECIFICATIONS

• Bluetooth Version: 2.1

• Battery Type: Lithium Polymer

• Frequency: 2.4 Ghz

• Voltage: 3.6V - 4.2V

• Current: 45 mA

• Talk Time: 2 - 3 hours

• Stand by Time: 72 hours

For Support and Warranty Information,

please visit:

www.mota.com/support/

registered trademark of UNorth® LLC. The Bluetooth

word mark, gure mark, combination mark, and

Bluetooth Smart and Bluetooth Smart Ready marks are

all trademarks that are owned by the Bluetooth SIG.

PAIR

Keep MOTA SmartWatch within 5ft of your

phone. Please ensure the SmartWatch is OFF.

Press and continue to hold the power button

(A) for 10 seconds until SmartWatch turns ON

and “Pairing” is shown on screen.

Access the Bluetooth menu on your phone to

search for devices.

Choose “Bracelet.”

If prompted for password, enter “0000”.

Complete the pairing process per your

phone’s instructions.

SmartWatch will then show the current time

and a headphone icon will be displayed to

indicate a successful connection.

Press and hold buttons (A) and (B) for 3

seconds to sync your contacts.

INCOMING CALL

When you receive a phone call, the

SmartWatch will vibrate and display the

caller’s name or number.

When receiving a call, press (A) or (B) to

answer the call. “Active Call” will be

displayed, you are now connected.

To reject/hang-up the incoming call, press

the power button (A) for 2 seconds. “Hang

up” will be displayed.

During conversation, press (B) to increase

volume, press (A) to decrease volume.

Double click (A) / (B) to re-dial the last

person you called.

RE-PAIR

When you restart your SmartWatch, you may

need to re-pair it to your phone. Please follow

PAIR instructions noted previously.

RESET

To un-pair your SmartWatch, please refer to

your phone’s instructions for un-pairing from

a Bluetooth device.

SAFETY GUIDELINES

Do not put the SmartWatch into liquid or

expose to high humidity environments.

Do not wash the SmartWatch.

Do not expose the SmartWatch to extreme

temperature (high or low).

Do not attempt to open the SmartWatch,

as this is not safe and may void your

warranty.

SPECIFICATIONS

• Bluetooth Version: 2.1

• Battery Type: Lithium Polymer

• Frequency: 2.4 Ghz

• Voltage: 3.6V - 4.2V

• Current: 45 mA

• Talk Time: 2 - 3 hours

• Stand by Time: 72 hours

For Support and Warranty Information,

please visit:

www.mota.com/support/

registered trademark of UNorth® LLC. The Bluetooth

word mark, gure mark, combination mark, and

Bluetooth Smart and Bluetooth Smart Ready marks are

all trademarks that are owned by the Bluetooth SIG.

Product specificaties

Merk:	MOTA
Categorie:	Smartwatch
Model:	SmartWatch G2
Gewicht:	- g
Breedte:	- mm
Diepte:	- mm
Ondersteunde mobiele besturingssystemen:	Android,iOS
Capaciteit van de accu/batterij:	- mAh
Bluetooth:	Ja
Beeldschermdiagonaal:	- "
Resolutie:	- Pixels
Bluetooth-versie:	2.1+EDR
USB-poort:	Ja
Meegeleverde kabels:	USB
Compatibele geheugenkaarten:	Niet ondersteund
Markt positionering:	Smartwatch
Ingebouwde luidsprekers:	Ja
FM-radio:	Nee
Vorm:	Vierkant
Ingebouwde microfoon:	Ja
Levensduur accu/batterij:	- uur
Display technologie:	OLED
Band kleur:	Wit
Dikte:	- mm
Horlogekast kleur:	Zwart
Wifi:	Nee
Type beeldscherm:	Digitaal
Stand-by-tijd (Bluetooth aan):	72 uur