Morphy Richards 402054 Handleiding
Morphy Richards
Blender
402054
Lees hieronder de 📖 handleiding in het Nederlandse voor Morphy Richards 402054 (12 pagina's) in de categorie Blender. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/12
FP402050 MUK Rev 3
Hand Blender
* Register online for your 2 year guarantee. See the back of this instruction book for details (UK and Ireland customers only).
** Applies to serrator blade only. See back of this instruction book for details.
*** Independently tested by CATRA using the International Standard Cutting Test System to ISO 8442.5 vs a standard plain
edge blade.
www.facebook.com/morphyrichardsuk
@loveyourmorphy
www.morphyrichards.co.uk/blog
For competitions, product hints and tips
and more join us at
Please read and keep these instructions for future use
download the
free app
402050 REV3.qxp_Layout 1 20/05/2015 13:26 Page 1
2
Health And Safety
In addition, we offer the following safety advice.
Location
•Do not use outdoors or in a bathroom.
•Always locate your appliance away from the edge of the
worktop.
•Do not place the beaker used with the appliance on a
highly polished wooden surface as damage may occur to
the surface.
Mains cable
•Do not let the mains cable hang over the edge of the
worktop where a child could reach it.
•Do not let the lead run across an open space e.g.
between a low socket and a table.
•Do not let the cable run across a cooker or other hot area
which might damage the cable.
•The mains cable should reach from the socket to the
base unit without straining the connections.
Personal safety
•Care shall be taken when handling the sharp cutting
blades, emptying the beaker and during cleaning.
Other safety considerations
•Do not use the appliance for anything other than its
intended purpose.
Product specific safety
• WARNING: The blender blades are very sharp. Handle
with care when using and cleaning.
• Do not clean the attachments under running water while
they are in position.
•IMPORTANT: Allow hot liquids to cool before adding to
the blender.
•Be careful whilst hot liquid is blending or poured into the
blender as it can be ejected due to sudden steaming.
•Switch off the appliance and disconnect from supply
before changing accessories or approaching parts that
move in use.
Electrical requirements
Check that the voltage on the rating plate of your
appliance corresponds with your house electricity supply
which must be A.C. (Alternating Current).
Should the fuse in the mains plug require changing, a 3
amp BS1362 fuse must be fitted.
The use of any electrical appliance requires the following common sense safety rules.
Please read these instructions carefully before using the product.
•This appliance can be used by persons with reduced physical,
sensory or mental capabilites, or lack of experience and
knowledge, if they have been given supervision or instruction
concerning the use of the appliance in a safe way and understand
the hazards involved.
•Children shall not play with the appliance.
•This appliance shall not be used by children.
•Keep the appliance and cord out of reach of children.
• Do not blend for longer than the time periods recommended in
‘Usage’ on page 7.
•For care and cleaning refer to page 8.
• Always disconnect from the supply if left unattended and before
assembling, dissembling or cleaning.
•Avoid touching moving parts. Keep hands, hair and clothing, and
utensils away from the attachment blades during operation, to
prevent personal injury and/or damage to the appliance.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
402050 REV3.qxp_Layout 1 20/05/2015 13:26 Page 2
3
Health And Safety ......................................................... 2
Introduction .................................................................. 3
Total Control ................................................................. 4
Product Overview ........................................................ 5
Before First Use ........................................................... 6
Using Your Hand Blender ............................................ 6
Suitable Foods ............................................................. 7
Usage ........................................................................... 7
Attachments ................................................................. 7
Turbo Button ................................................................ 7
Blending In A Saucepan .............................................. 7
Hints & Tips .................................................................. 8
Care And Cleaning ....................................................... 8
Contact Us ................................................................... 8
Recipes ......................................................................... 9
Guarantee ..................................................................... 12
Contents
Thank you for your recent purchase of this Morphy Richards Total
Control Hand Blender.
Your Hand Blender has a locking connection for safety. Please read
the instructions for information on how to use your Hand Blender
thoroughly before use.
Remember to visit www.morphyrichards.co.uk to register your
product’s two year guarantee.
Introduction
402050 REV3.qxp_Layout 1 20/05/2015 13:26 Page 3
Product specificaties
Merk: | Morphy Richards |
Categorie: | Blender |
Model: | 402054 |
Kleur van het product: | Wit |
Gewicht: | 2060 g |
Breedte: | 65 mm |
Diepte: | 65 mm |
Hoogte: | 390 mm |
Gewicht verpakking: | 2760 g |
Breedte verpakking: | 260 mm |
Diepte verpakking: | 280 mm |
Hoogte verpakking: | 246 mm |
Soort: | Staafmixer |
Gebruikershandleiding: | Ja |
Materiaal behuizing: | Kunststof |
Aantal snelheden: | 8 |
Stroombron: | AC |
Uitneembare bak: | Ja |
Vermogen: | 650 W |
Inhoud bak/kan: | 1.25 l |
Variable snelheid: | Ja |
Land van herkomst: | China |
Vaatwasserbestendige onderdelen: | Ja |
IJs-crusher: | Ja |
Roestvrijstalen mes: | Ja |
Verwijderbare mesunit: | Ja |
Turboknop: | Ja |
Pulse function: | Ja |
Materiaal mes: | Roestvrijstaal |
Aantal kopjes: | 2 stuk(s) |
Fijnsnijder: | Ja |
Mengkom materiaal: | Kunststof |
Capaciteit kruik: | 0.5 l |
Pallet brutogewicht: | 178040 g |
Producten per pallet: | 48 stuk(s) |
Mix kop met tuit: | Ja |
Pallet brutohoogte: | 1710 mm |
Producten per palletlaag: | 16 stuk(s) |
Lagen per pallet: | 3 stuk(s) |
Aantal (buitenste) hoofdverpakkingen per pallet: | 12 stuk(s) |
Aantal dozen per palletlaag: | 4 stuk(s) |
Producten per (binnenste) verzendverpakking: | 4 stuk(s) |
Heb je hulp nodig?
Als je hulp nodig hebt met Morphy Richards 402054 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Blender Morphy Richards
7 Juni 2023
28 Mei 2023
27 Mei 2023
9 Mei 2023
4 Mei 2023
25 April 2023
1 April 2023
Handleiding Blender
- Blender Electrolux
- Blender Braun
- Blender Bosch
- Blender Philips
- Blender Panasonic
- Blender AEG
- Blender BEKO
- Blender Grundig
- Blender Inventum
- Blender Kenwood
- Blender Krups
- Blender Medion
- Blender Quigg
- Blender Siemens
- Blender Tefal
- Blender Unold
- Blender Adler
- Blender Afk
- Blender Akai
- Blender Alessi
- Blender Ambiano
- Blender Amica
- Blender Ariete
- Blender Bamix
- Blender Bartscher
- Blender Beem
- Blender Bellini
- Blender Beper
- Blender Bestron
- Blender Bifinett
- Blender Blaupunkt
- Blender Blendtec
- Blender Blokker
- Blender Bodum
- Blender Bomann
- Blender Boretti
- Blender Bourgini
- Blender Brabantia
- Blender Brandt
- Blender Breville
- Blender Buffalo
- Blender Bugatti
- Blender Domo
- Blender Domoclip
- Blender Dualit
- Blender Duronic
- Blender Efbe-schott
- Blender Emerio
- Blender Esge
- Blender Esperanza
- Blender Espressions
- Blender ETA
- Blender Eufy
- Blender Exquisit
- Blender Fagor
- Blender Farberware
- Blender Fritel
- Blender G3 Ferrari
- Blender Galanz
- Blender Gastroback
- Blender GE
- Blender George Foreman
- Blender Gorenje
- Blender Gourmetmaxx
- Blender Graef
- Blender H.Koenig
- Blender Haier
- Blender Hanseatic
- Blender Hendi
- Blender Hitachi
- Blender Homeland
- Blender Hotpoint
- Blender Hyundai
- Blender Innoliving
- Blender InstantPot
- Blender Kalorik
- Blender Kambrook
- Blender Kitchen Crew
- Blender KitchenAid
- Blender Klarstein
- Blender Koenic
- Blender Koenig
- Blender Kogan
- Blender Konig
- Blender Korona
- Blender Lagrange
- Blender Laica
- Blender Livington
- Blender Livoo
- Blender Logik
- Blender Maestro
- Blender Magic Bullet
- Blender Magimix
- Blender Maxwell
- Blender Melissa
- Blender Mesko
- Blender Mia
- Blender Micromaxx
- Blender Midea
- Blender Moa
- Blender Montana
- Blender Moulinex
- Blender MPM
- Blender Nedis
- Blender Ninja
- Blender Nordmende
- Blender Nova
- Blender Novamatic
- Blender Novis
- Blender NutriBullet
- Blender Philco
- Blender Primo
- Blender Princess
- Blender Privileg
- Blender ProfiCook
- Blender Proline
- Blender Redmond
- Blender Renkforce
- Blender Ritter
- Blender Rommelsbacher
- Blender Rotel
- Blender Russell Hobbs
- Blender Sage
- Blender Salton
- Blender Santos
- Blender Sanyo
- Blender Saro
- Blender Saturn
- Blender Schneider
- Blender Sencor
- Blender Severin
- Blender Shark
- Blender Sharp
- Blender Silvercrest
- Blender Smeg
- Blender Sogo
- Blender Solac
- Blender Solis
- Blender Springlane
- Blender Steba
- Blender Studio
- Blender Sunbeam
- Blender SupportPlus
- Blender Swan
- Blender Taurus
- Blender Team
- Blender Telefunken
- Blender Tesco
- Blender Tevion
- Blender Thane
- Blender Thomas
- Blender Tomado
- Blender Tower
- Blender Trebs
- Blender Tristar
- Blender Turbotronic
- Blender Turmix
- Blender Ufesa
- Blender Vitamix
- Blender Vitek
- Blender Vivax
- Blender Waves
- Blender Weasy
- Blender Westinghouse
- Blender Wmf
- Blender Wolf
- Blender Xsquo
- Blender Zelmer
- Blender Jata
- Blender JML
- Blender Jocel
- Blender JTC
- Blender Juiceman
- Blender OK
- Blender Omega
- Blender OneConcept
- Blender Orion
- Blender Oster
- Blender Clas Ohlson
- Blender Arzum
- Blender Black And Decker
- Blender Camry
- Blender Caso
- Blender Clatronic
- Blender Concept
- Blender Continental Edison
- Blender Cuisinart
- Blender ECG
- Blender Elba
- Blender Gallet
- Blender Hamilton Beach
- Blender Heinner
- Blender Imetec
- Blender Izzy
- Blender Khind
- Blender Mellerware
- Blender OBH Nordica
- Blender Optimum
- Blender Orbegozo
- Blender Profilo
- Blender Scarlett
- Blender Sinbo
- Blender Trisa
- Blender Vox
- Blender Wilfa
- Blender Champion
- Blender Monoprice
- Blender Catler
- Blender Drew & Cole
- Blender Nutrichef
- Blender AYA
- Blender Bella
- Blender Costway
- Blender Danby
- Blender King
- Blender Nevir
- Blender Svan
- Blender Ardes
- Blender Eldom
- Blender Grunkel
- Blender Lümme
- Blender Coline
- Blender Haeger
- Blender Waring Commercial
- Blender Brentwood
- Blender Chefman
- Blender DCG
- Blender Witt
- Blender Royal Catering
- Blender Apuro
- Blender Day
- Blender Zephir
- Blender Lenoxx
- Blender Riviera And Bar
- Blender Cosori
- Blender Baby Brezza
- Blender G21
- Blender Aurora
- Blender BORK
- Blender Orava
- Blender Signature
- Blender Dash
- Blender Cecotec
- Blender Prixton
- Blender Flama
- Blender Nesco
- Blender RGV
- Blender Comelec
- Blender Dynamic
- Blender Bar Maid
- Blender Ursus Trotter
- Blender Noveen
- Blender CRUX
- Blender AENO
- Blender Nutri Ninja
- Blender Łucznik
- Blender Emeril Lagasse
- Blender PowerXL
- Blender Globe
- Blender Beautiful
- Blender Tribest
- Blender Usha
- Blender Vitinni
- Blender Zwilling
- Blender Sam Cook
- Blender Zeegma
- Blender WestBend
- Blender Just Perfecto
- Blender Focus Electrics
- Blender Petra Electric
- Blender AvaMix
- Blender Robot Coupe
- Blender Inno-Hit
- Blender Jarden
- Blender JIMMY
- Blender Semak
- Blender Create
- Blender Girmi
- Blender BioChef
- Blender Power Air Fryer XL
- Blender Luvele
- Blender Back To Basics
- Blender Proappliances
- Blender Electroline
- Blender Imarflex
- Blender Mystery
Nieuwste handleidingen voor Blender
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024