Morel BEAT-X Handleiding

Morel Hifi systeem BEAT-X

Lees hieronder de 📖 handleiding in het Nederlandse voor Morel BEAT-X (4 pagina's) in de categorie Hifi systeem. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/4
Product Disposal—
Certain international, nationa l
and/or local laws and/or reg -
ulations may apply regarding the
disposal of this product. For furthe r
detailed information, pleas e
contact the retailer where yo u
purchased this product or the Morel
Distributor in you r
Morel’s distributors can be found
at the website:
country.
morelhi.com
IMPORTANT SAFETY INSTRUCTION S
READ BEFORE OPER TING EQUIPMEN A T
1. .Read these instructions
2. .Keep these instructions
3. .Read all warnings
4. .Follow all instructions
5. Do not use the subwoofer near water.
6. Clean only with dry cloth .
7. Do not block any ventilation openings. Install in accordance with th e
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves ,
or other apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the othe r. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safet y. If the provided
plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.
10 Protect the power. cord from being walked on or pinched particularly at plugs ,
convenience receptacles, and the point where they exit from the apparatus .
11 Only use attachments/accessories. specied by the manufacture r.
12 Use only with. the cart, stand, tripod, bracket, or table specied by th e
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-ove r.
13 Unplug this apparatus. during lightning storms or when unused for long periods
of time.
14 Refer all servicing. to qualied service personnel. Servicing is required when the apparatus
has been damaged in any wa y, rsuch as powe -supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normall y, or has been dropped.
15. WARNING: To reduce the risk of re or electric shock, this apparatus should not be exposed to
rain, moisture and objects lled with liquids. should not be placed on this apparatus.
16. To completely disconnect this equipment from the mains, disconnect the power supply cord
plug from the receptacle.
17 The main plug. of the power supply cord shall remain readily operable.
Construction
Dim sionsen 10.6”x11.6”x10.6”
( x .5x cm)27 29 27
Drive itun
Fr cy res seequen pon 35-160Hz
Ampli erfi
In tpu
Vo aglt e 220-240 50VAC Hz
Net weight 16.5 lbs (7.5 Kg)
80 on nuou paW,class AB, c ti s power, ll formats com a tible
with tomatic on/off switch, level, crossover and p se au ha
c trols.on
Less than 0.5W in standby.
One 8” subwoofer with 2” voice coil a nd
rear-v ted m t motor en agne
MDF coated paint nishpiano fi
Line-level RCA p jack / Hi Level Inhono
Morel operates a product design improvement policy consequently specifications are subject to alterations without prior notice
SPECIFICATIONS
AC Power Connection
And AUTO ON/OFF (AUTO mute circuit)
Volume Level
Phase Switch
The SUB-8X features auto on/off circuitry , marked “AUTO”, that automatically turns your subwoofer on when it senses
a signal.
To activate it turn the Auto swith to the ON position. When no signal is present, the circuit turns the subwoofer off after a
few minutes. If you are concerned about the brief delay between when the music starts and when the subwoofer turns
on, simply maintain the main POWER switch in an ON position and turn the AUTO swith off position.
Adjust by ear using a wide variety of CDs and video sources. Adjust for deep, powerful but pleasant bass.
Have someone else switch between the two settings while you sit in your favorite listening position. Use music with good
bass and a deep male vocal. When you hear the best balance of deep bass and natural lower octaves of the male voice,
you have achieved optimum phase tuning.
SUBWOOFR ADJUSTMENTS
This control adjusts the frequency range over which the subwoofer operates. When using smaller main speakers, the
upper range of the control will probably yield the best results. With larger speakers, the lower end of the control range will
probably sound best, but always let your ear be the final judge. If male vocals sound “thin,” turn this control up until the
voice sounds rich but not boomy. If male vocals sound too “thick” or “chesty,” turn this control down until the voice sounds
natural.
Frequency
SUBWOOFER CONNECTION
OPTION 1-
Receivers that include a “Sub Out” feature- the most
common hookup method with Dolby Digital receivers.
NOTE: Use either the L or R Line input (another
hookup option is to use a Y-split cable and connect
both L and R Line inputs). After you make this Sub
Out connection, turn the “Low Pass” filter fully clock-
wise.
Connect all speakers directly to the receiver. When
using method no.1, adjust your receiver’s speaker
configurations as follow: Set Front, Center and
Surround speakers to “small” or “large” according to
speaker size and bandwidth.
- Receiver Settings:
-Front, Center and Surrounds= “small/large”.
-Subwoofer=”ON”, or “YES”, or “PRESENT”
-Set the crossover frequency on the receiver to
60-120Hz dependng on speaker bandwidth.
Consult your receiver’s owners manual for speaker
configuration.
normally a satelite speaker would be set to “small”
and “big”/ floor standing speaker, would be set to
“large”.
*Imortant Note: Use only one of these options.
Never combine hookup options.
OPTION 2-
Two channel or more receivers with no “Sub Out”.
If you select to use the speaker level input , use two-con-
ductor 16 gauge or thicker speaker wires. see your Morel dealer
for wire recommendations.
Strip 1/2’’ (12mm) of insulation from each of the two conductors
on both ends to expose the bare wire. Twist the exposed wire of
each conductor to form two un-frayed strands.
- Connect the left and right front speaker outputs of your receiv-
er to the speaker high level input of the powered subwoofer
using speaker wire.
- Then, connect the left and right front speakers using speaker
wire from the speaker high level outputs from the powered
subwoofer.
Adjust subwoofer level and frequency low pass to match speak-
ers level and frequency to create the best bass reproduction.
NOTE: One of the speaker input terminals on the rear of the
speaker is remarked red (+) and the other black (-). Make
certain that you connect the wire from the red (+) terminal of
your receiver to the red (+) terminal on your speaker, and the
wire from the black (-) terminal of the receiver to the black (-)
terminal of the speaker. Speaker wire has some indication (such
as color coding, ribbing, or writing) on one of the two conduc-
tors to help maintain consistency. If your subwoofer doesn’t
seem to produce much bass, it is most likely that one of the
speaker wires is connected backwards. Double check all
connections for correct polarity.
STEREO RECEIVER

Product specificaties

Merk: Morel
Categorie: Hifi systeem
Model: BEAT-X

Heb je hulp nodig?

Als je hulp nodig hebt met Morel BEAT-X stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Hifi systeem Morel

Morel

Morel Sopran 634 Handleiding

13 Januari 2025
Morel

Morel BEAT-X Handleiding

13 Januari 2025
Morel

Morel SUB-8X Handleiding

13 Januari 2025
Morel

Morel SUB-10X Handleiding

1 Oktober 2024
Morel

Morel USUB 803 Handleiding

1 Oktober 2024
Morel

Morel Soundsub PSW8e-w Handleiding

1 Oktober 2024
Morel

Morel Sopran 934 Handleiding

1 Oktober 2024
Morel

Morel MXT280C Handleiding

4 Juni 2023
Morel

Morel MXT-380 Handleiding

2 Juni 2023
Morel

Morel MXR240.4 Handleiding

1 Juni 2023

Handleiding Hifi systeem

Nieuwste handleidingen voor Hifi systeem

OSD Audio

OSD Audio Nero Stream ARC Handleiding

13 Januari 2025
Philips

Philips TAM3505M2 Handleiding

13 Januari 2025
Philips

Philips TAM3205M2 Handleiding

13 Januari 2025
Terratec

Terratec HA-1 Charge Handleiding

13 Januari 2025
Bennett & Ross

Bennett & Ross AV-5 Handleiding

9 Januari 2025
Magnavox

Magnavox MM435M Handleiding

7 Januari 2025
Magnavox

Magnavox MMA4019 Handleiding

7 Januari 2025
ART

ART USB Phono Plus Project Series Handleiding

7 Januari 2025
Magnavox

Magnavox MHT935BT Handleiding

7 Januari 2025
Magnavox

Magnavox MHT828 Handleiding

7 Januari 2025