Mooer WoodVerb Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Mooer WoodVerb (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
6. Mode Switch:
7. MIX Knob: Control the ratio of the guitar dry sound and the effect sound.
Rotate the knob clockwise (right) will produce more effect sound presented
while rotate the knob counterclockwise (left) will have more of your guitar
dry sound.
1. TRUE BYPASS Footswitch:
Push down the footswitch to toggle
between on and bypass status.
2. ON/OFF LED:
3. DC IN Power Jack:
For power supply, use a 9-volt DC
regulated AC adapter (plug polarity
is positive on the barrel and negative
in the center).
4. INPUT Jack:
1/4 mono audio jack, for connecting
guitar.
5. OUTPUT Jack:
1/4mono audio jack, outputs the signal.
Input: 1/4 monaural jack (impedance: 470k Ohms)
Output: 1/4 monaural jack (impedance: 100 Ohms)
Power Requirements: AC adapter 9V DC (center minus plug),
recommended to use Mooer Micro Power
Current Draw: 130 mA
Dimensions: 93.5mm (D) 42mm (W) × × 52mm (H)
Weight: 145g
Accessories: Owners Manual
* Disclaimer: Any specifications update won't be amended in this manual.
A digital reverb pedal specifically designed for acoustic guitar players
Provide players with three types of reverb effects: Reverb, Mod, Filter
Reverb: Simulates a Plate reverberation
Mod: Add modulation effect to the reverb
Change the reverb effect types from
Reverb/Mod/Filter.
Shows the on/off status of
, when the LED is WoodVerb
lit the effect is engaged.
Main Features
PLEASE READ CAREFULLY BEFORE PROCEEDING
Power Supply
Connections
Always turn off the power of this and all other equipment before connecting or
disconnecting, this will help prevent malfunction and / or damage to other devices.
Also make sure to disconnect all connection cables and the power cord before
moving this unit.
Cleaning
Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth.
Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax, solvents,
cleaning fluids, or chemical-impregnated wiping cloths.
Interference with other electrical devices
Radios and televisions placed nearby may experience reception interference.
Operate this unit at a suitable distance from radios and televisions.
Location
To avoid deformation, discoloration, or other serious damage, do not expose
this unit to the following conditions:
Direct sunlight Heat sources
Magnetic fields Extreme temperature or humidity
Excessive dusty or dirty location High humidity or moisture
Strong vibrations or shocks
Please connect the designated AC adapter to an AC outlet of the correct voltage.
Please be sure to use only an AC adapter which supplies 9V (±10%) DC, center
minus. The maximum working voltage shall not exceed 12V, otherwise may be
dangerous equipment damage, fire or other problems.
Unplug the AC power adapter when not using or during electrical storms.
Precautions
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
This device may not cause harmful interference
This device must accept any interference received, including interference
that may cause undesired operation
Filter: Add a sweeping filter sound to the reverb
True bypass switch
DC 9V adapter power supply
WoodVe r b
Acou sti c Guit ar Rever b Pedal
8. TONE/RATE/RANGE Knob: This knob controls different parameters under
different modes. Under Reverb/Mod/Filter mode, this knob controls Tone/
Rate/Range respectively.
9. DECAY Knob: This knob controls the decay level of the reverb effects.
7
3
5
9
4
8
6


Product specificaties

Merk: Mooer
Categorie: Niet gecategoriseerd
Model: WoodVerb

Heb je hulp nodig?

Als je hulp nodig hebt met Mooer WoodVerb stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Mooer

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd