Mooer Micro Power Handleiding

Mooer Niet gecategoriseerd Micro Power

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Mooer Micro Power (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 151 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/1
Dimensions: 93.5mm (D) 42mm (W) 36mm (H)
Weight: 140g
* Disclaimer: Any specification’s update won't be amended in this manual.
Provide stable 9V DC power supply with high performance, each
output maximum current of 300 mA, can meet most of the pedal
use requirement.
Eight independent output short circuit protection design, when one
circuit output failure, other output lines still can work independently.
8 LED lights indicating output status in darkness, its unique
dull-polished feature can also protect your eyes from spotlights
on stage.
Very small and exquisite, full metal shell.
1.INPUT POWER LIGHT:
12V DC input: when connect the power supply, the red light is lit up.
2.OUTPUT POWER LIGHT:
Eight-way output power light distribution in two side, when the power
cord access in any way, the corresponding indicator lights up.
3.INPUT POWER JACK:
Connect the input power.
4.OUTPUT POWER JACK:
Connect the DC, connected with the pedal power supply.
If the input polarity of the electrical device is , please connect
the DC power cable to the device directly.
ξ˜‚ξ˜ƒNOTE
Before use, please confirm the equipment is the same polarity with the
power adapter, otherwise may cause damage.
If the input polarity of the electrical device is , please connect
polarity reversal cable to the DC power cable, then connect the device.
Power supply: 12V power adapter
Output current: Eight 9V power supply output independently
Current draw: Each current of 300 mA, not more than the current of
the input power adapter. (If using the Mooer Power
adapter, then the current is 2A)
The 12V power adapter 1 (12V 2A)
460mm lines 4 (connect the pedal)
610mm lines 4 (connect the pedal)
200mm Polar conversion line (The output power from the negative is
changed to outside to inside is outside negative)
Velcro tape
Owner ’s Manual
Accessorles
Connect instructions
ξ˜‚ξ˜ƒShort circuit protection function: When a short circuit or current channel
output connected device when more than 300 mA, will automatically disconnect,
indicator light will turn off. then the power equipment and single block after
disconnection, the output channel will automatically restored.
Multi-Power Supply
Γ— Γ—
Γ—
Γ—
Γ—
Main Features
PLEASE READ CAREFULLY BEFORE PROCEEDING
Power Supply
Connections
Always turn off the power of this and all other equipment before connecting or
disconnecting, this will help prevent malfunction and / or damage to other devices.
Also make sure to disconnect all connection cables and the power cord before
moving this unit.
Cleaning
Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth.
Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax, solvents,
cleaning fluids, or chemical-impregnated wiping cloths.
Interference with other electrical devices
Radios and televisions placed nearby may experience reception interference.
Operate this unit at a suitable distance from radios and televisions.
Location
To avoid deformation, discoloration, or other serious damage, do not expose
this unit to the following conditions:
Direct sunlight Heat sources
Magnetic fields Extreme temperature or humidity
Excessive dusty or dirty location High humidity or moisture
Strong vibrations or shocks
Please connect the designated AC adapter to an AC outlet of the correct voltage.
Please be sure to use only an AC adapter which supplies 12V (Β±10%) DC, center
minus. The maximum working voltage is 15V, any voltage higher than this will
cause dangerous damage like explosion to the equipment itself.
Unplug the AC power adapter when not using or during electrical storms.
Precautions
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference
that may cause undesired operation.

Product specificaties

Merk: Mooer
Categorie: Niet gecategoriseerd
Model: Micro Power

Heb je hulp nodig?

Als je hulp nodig hebt met Mooer Micro Power stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Mooer

Mooer

Mooer PRIME S1 Handleiding

6 April 2024
Mooer

Mooer MICRO DI Handleiding

9 Juli 2023
Mooer

Mooer Echolizer Handleiding

9 Juli 2023
Mooer

Mooer Noise Killer Handleiding

8 Juli 2023
Mooer

Mooer Echoverb Handleiding

8 Juli 2023
Mooer

Mooer Solo Handleiding

8 Juli 2023
Mooer

Mooer 019 Handleiding

7 Juli 2023
Mooer

Mooer Micro Aby MK2 Handleiding

7 Juli 2023
Mooer

Mooer Triangle Buff Handleiding

7 Juli 2023
Mooer

Mooer Ultra Drive MKII Handleiding

6 Juli 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024
Trace Elliot

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024
Kramer

Kramer K-Bar Camera Bracket Handleiding

26 November 2024
Kramer

Kramer RK-19 Handleiding

26 November 2024
Kramer

Kramer OSP-MM1 Handleiding

26 November 2024
Kramer

Kramer ASPEN-1616UX Handleiding

26 November 2024
Korg

Korg Pitchstrap Handleiding

26 November 2024
NeoMounts

NeoMounts WL70-450BL11 Handleiding

26 November 2024
Kramer

Kramer CLS-AOCH/60 Handleiding

26 November 2024
Klauke

Klauke EKM 6022ISM Handleiding

26 November 2024