Mooer Baby Bomb 30 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Mooer Baby Bomb 30 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Precautions
Connection instructions
*Notes Any specification’s update will not be amended in this manual.
Features
Pedal layout
MICRO
PREAMP
CABINET
Part No:620010639
PLEASE READ CAREFULLY BEFORE PROCEEDING
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference
that may cause undesired operation.
Connections
Before connecting the device or disconnecting it, be sure to turn off the power and
other equipment, which will help to avoid malfunction and damage to other
equipment. Also, make sure that all cables and power cords are disconnected before
moving the unit.
Power Supply
Use the correct AC outlet to connect the power adapter.Please use a negative
internal 24V (± 10%) power transformer, otherwise it will cause damage
to equipment, fire or other problems.When unused or thunderstorms please
unplug the power supply.
Electrical interference
When using the unit, the radio and the TV may cause interference. Use the unit
away from the radio and the TV.
Direct sunlight
Magnetic fields
Excessively dusty or dirty location
Strong vibration or shock
Extreme temperature or humidity
High humidity or moisture
Heat sources
Place the place
To prevent deformation, discoloration, and other serious damage, avoid the following:
Clean
Please use a dry, soft cloth to clean the unit. If necessary, wipe with a slightly moist
cloth. Do not use rough clean powder, alcohol, paint thinner, wax, solvent, detergent
and chemical agents such as impregnated wipes.
Operating
Do not use the switch and control elements violently.
Do not allow paper, metal, and other objects to fall into the machine.
Be careful not to fall, do not subject it to shock and excessive pressure.
30 Watt maximum power output
Master volume control can provide smooth post stage overdrive
WARM/BRIGHT switch to adjust the power stage presence
Built in overcurrent protection
Can be connected to speaker cabinets with a load of 8 Ohm or 16 Ohm
1.Connect the DC 24V 2A power supply to the DC IN of Baby Bomb
2.Connect the output of your Preamp or pedalboard to the INPUT of Baby Bomb
3.Connect the of Baby Bomb to the input of your guitar SPEAKER OUT
speaker cabinet using an unbalanced speaker cable. DO NOT connect to a
speaker unless it has and input impedance of 8 Ohms or 16 Ohms
Note: For best results connect your Overdrive and Distortion effects before your
preamp in the signal chain. Connect your modulation and time based effects
(Delay, reverb, etc.) after the preamp and before the BABYBOMB in your signal
chain.
Model: B B 30aby omb
Output load: 8-16 Ohms
Output power: 30W
Power supply: DC 24V, 2A DC,
Size: 93.5mm (D) x 42mm (W) x 52mm (H)
Weight:144g
Accessories: User manual,Micro Power
1.IN:
Connect the output of your
preamp or pedalboard to the INPUT
using a standard 1/4" jack cable
2.SPEAKER OUT:
Connect to a guitar speaker cabinet
input rated at 8 Ohms or 16 Ohms
using an unbalanced speaker cable
3.MASTER:
Adjusts the output volume
4.LED:
When the Baby Bomb has power
connected the LED will illuminate
5.WARM/BRIGHT
Adjusts the presence of the
Baby Bomb output
6.DC IN:
Connect a DC 24V 2A
power supply
02
05
06
MASTER
SPEAKER OUT 8 16Ω~Ω
WARM
BRIGHT
01
04
03
MASTER
SPEAK ER OUT 8 16Ω~Ω
WARM
BRIGHT
CH/CAB
DC9V
CH/CAB
B ABY
B 30OMB
OD/Dist
EFFECT
30W Digital Micro Power AMP


Product specificaties

Merk: Mooer
Categorie: Niet gecategoriseerd
Model: Baby Bomb 30

Heb je hulp nodig?

Als je hulp nodig hebt met Mooer Baby Bomb 30 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Mooer

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd