Monitor Audio Radius 390 Handleiding

Monitor Audio Subwoofer Radius 390

Lees hieronder de 📖 handleiding in het Nederlandse voor Monitor Audio Radius 390 (16 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

o w n e r s m a n u a l

9 H K P \ Z 



9 H K P \ Z 

 

monitoraudio.com 1

Introduction

Thank you for your purchase of the Radius 380 or 390 subwoofer, which has been designed and

constructed using quality systems and materials to provide years of enjoyment, reliability and pride

of ownership.

Music is and should be a natural enhancement of life. It stimulates the imagination, changes your

mood, helps you relax, and provides endless hours of entertainment. At Monitor Audio we pride

ourselves in attempting to make the listening experience as close as possible to the original ‘music’

production.

Please read through this manual to familiarise yourself with any safety advice and how to set up

your subwoofer to achieve the very best listening experience.

Please retain this manual for future reference.

Unpacking

Care must be taken at all times when handling the subwoofer due to the weight

and the construction of the product. We recommend a two-person lift wherever

appropriate.

The mains power cord(s) and 12 volt trigger lead are contained separately in the packaging and

should be removed prior to unpacking the product.

To remove the subwoofer from its carton place some protective material on the ﬂoor and having

removed any loose items (mains lead(s) and 12 volt trigger lead) from the top of the packaging,

carefully invert the carton. Also see the icons printed on the carton. Gradually pull the carton

upwards to expose the subwoofer, which will be presented with its base uppermost. Remove ﬁxing

tape from bag and expose the base/cabinet.

ENGLISH

Radius2

Positioning/Initial Set Up

Leave the subwoofer unplugged from the mains until the installation procedure

is completed.

The subwoofer should now be sited in the most suitable position, preferably not directly in the

corner of a room as this may cause excessive bass boom. Once a desirable position is achieved it is

important to check if the cables are long enough to reach comfortably without being under tension.

The optimal control settings will depend entirely on your system conﬁguration, room environment

and personal tastes. However, for initial trials set the controls as follows:

Volume Control Should be set to approximately 10 o’clock.

Frequency Control Should be set to the approximate frequency depending on

main speakers when using the L & R Line Level Inputs.

Bass Control Should be set to Movies when connecting to an AV receiver

or Music when connecting to a stereo ampliﬁer.

Phase Control Should be set to zero degrees.

Mode Switch Should be set to ‘on’.

12v Trigger (optional) Do not connect at this stage.

Input Connections from the ampliﬁer can be made at this stage

before the power is connected to the subwoofer. Refer to

items 1 and 2 on page 3.

Never connect or disconnect the RCA input/ output leads with the subwoofer

switched on.

Set Up

Once the input cables are connected and the controls are set in accordance with the initial set-up

procedure above, the subwoofer can be connected to the mains power supply and switched on

at the mains power switch.

Do not play any music or movies at this stage as the auto set up of the AV amp (if using one) will

need to be run. If your amp has an auto set up procedure, run this now. If you do not have an

auto set up or are using a stereo amp connected to the left and right inputs, set the crossover in

accordance with your main speakers. If using the Radius Series speakers this should be around

80Hz, but experimentation is advisable.

When the auto set up is complete, check that the subwoofer settings on the AV amp are correct.

The crossover frequency should be roughly 80Hz and the level should be no more/ less than +/-

3dB. If not we would suggest adjusting accordingly.

Now play a variety of music/ ﬁlm excerpts that you are familiar with and adjust the level of the

subwoofer to a point where it integrates with the rest of the system and to where you are happy.

The volume of the amp can then be adjusted to an average listening level once you are sure

everything is working correctly to double check your sub woofer level settings.

Product specificaties

Merk:	Monitor Audio
Categorie:	Subwoofer
Model:	Radius 390
Kleur van het product:	Zwart
Type stroombron:	AC
Stroomverbruik (in standby):	0.5 W
Equalizer-instellingen:	Ja
Impedantie:	20 Ohm
Gemiddeld vermogen subwoofer:	200 W
Diameter driver subwoofer (imperiaal):	10 "
Subwoofertype:	Actieve subwoofer
Frequentiebereik subwoofer:	30 - 120 Hz
Breedte van de subwoofer:	330 mm
Hoogte van de subwoofer:	348 mm
Diepte van de subwoofer:	345 mm
Gewicht subwoofer:	13760 g
Aantal subwoofers:	1
AC-ingangsspanning:	110 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	200 W
Versterker klasse:	D
Line inputs (RCA):	1