Monitor Audio IMS-4 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Monitor Audio IMS-4 (9 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 126 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
o w n e r ’ s m a n u a l
Back Panel
AC 100-240V – 50/60Hz
MONITOR AUDIO
OPTICAL
OUT 1
COAXIAL
OUT 1
DIGITAL PRE-AMPLIFIE R OUTPUTANALOGUE PRE-AMPLIFIER OUTPUT
LAN INPUT
1
1L
1R
2L
2R
OPTICAL
OUT 2
COAXIAL
OUT 2
2
OPTICAL
OUT 3
COAXIAL
OUT 3
3
OPTICAL
OUT 4
OPTICAL
INPUT
DIGITAL
INPUT USB INPUT SERVICE O NLY
SYSTEM
INTERRUPT
5V–30V AC/DC
OFF
OUT IN
ON
RESET
ANALOGUE
INPUT
COAXIAL
OUT 4
41234
3L
3R
4L
4R
L
R
+12V TRIGGE R
MAC ID 00:00:00:00:00 :00 S/N X00X X000X0 00000
IN
IR
1 2 3 4
5
6
7
8
9
10 11
Front Panel
1 2
1. Power Button
Used to toggle the power of the IMS-4. A
single press will wake the unit and holding in
for 5 seconds will put in to standby - the LED
will go off shortly after 5 seconds.
2. Status LED
Shows the status of the IMS-4. Refer to the
table below for further information.
IMS-42
1. 4 x L & R Analogue Outputs
Connect to analogue inputs on amplifiers
2. L & R Analogue Input
This is the input from the analogue source
3. 4 x Optical and Coaxial Digital Outputs
Connect to the optical or coaxial inputs on
amplifiers
4. Digital Input
Connects to the optical digital output of
source
5. LAN & USB Input
Connect the Ethernet cable from the router
or switch to connect the IMS-4 to the local
network.
The USB input can be used to connect a
USB drive with locally stored music files for
playback to the selected Room.
6. Reset
This is the factory reset button. For details on
performing the factory reset, please refer to
page 12.
7. Service Only
This Mini USB socket and button are for
service use only and should only be used by
qualified personnel
8. 12v Trigger
Connect the output from another 12v trigger
to remotely turn on and off the IMS-4. The
toggle switch needs to be enabled for the
trigger to work. The output will only work
when there is a 12v trigger input.
9. IR Input
Connect an appropriate IR receiver to the
IMS-4 to be able to teach it basic commands.
Refer to page 9 for further information.
10. System Interrupt
Connect to either an AC or DC system to
trigger a door bell chime, or mute the system
if connected to are alarm. Refer to page 8
for further information.
11. Mains Input Socket
Connection made to the mains using the
provided, standard 3 pin (earthed) IEC mains
lead.


Product specificaties

Merk: Monitor Audio
Categorie: Niet gecategoriseerd
Model: IMS-4
Kleur van het product: Black, Orange
Gewicht: 2800 g
Breedte: 438 mm
Diepte: 236.1 mm
Hoogte: 43.1 mm
Ondersteund audioformaat: AAC, AIFF, ALAC, MP3, MQA, OGG, WAV, WMA, WMA-L
USB-poort: Ja
USB-connectortype: USB Type-A
Ethernet LAN: Ja
Ethernet LAN, data-overdrachtsnelheden: 10, 1000 Mbit/s
Ondersteunt Windows: Windows 10, Windows 2000, Windows 7, Windows Vista, Windows XP
Audio-uitgangskanalen: 4.0 kanalen
Bit rate: 24 Bit
Internet radio services ondersteund: Amazon Music, Deezer, Napster, Qobuz, Spotify, Tidal
AC-ingangsspanning: 100-240 V
AC-ingangsfrequentie: 50-60 Hz

Heb je hulp nodig?

Als je hulp nodig hebt met Monitor Audio IMS-4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Monitor Audio

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd