Mitsubishi CP-D707DW Handleiding

Mitsubishi Printer CP-D707DW

Lees hieronder de 📖 handleiding in het Nederlandse voor Mitsubishi CP-D707DW (27 pagina's) in de categorie Printer. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/27
DIGITAL COLOR PRINTER
MODEL
CP-D70DW
CP-D707DW
OPERATION MANUAL
THIS OPERATION MANUAL IS IMPORTANT
TO YOU.
PLEASE READ IT BEFORE USING YOUR
DIGITAL COLOR PRINTER.
CP-D70DW CP-D707DW
Hereby, Mitsubishi Electric Corporation, declares that this digital color printer is in
compliance with the essential requirements and other relevant provisions of Directive
1999/5/EC.
OTHERSPRECAUTIONS FEATURES PREPARATION TROUBLE-
SHOOTING CONTENTS
WARNING :
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
INFORMATION
This Class A digital apparatus complies with Canadian ICES-003.
CAUTION :
TO REDUCE THE RISK OF ELECTRIC
SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
The lightning ash with arrowhead symbol, within an equilateral triangle, is intended
to alert the user to the presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufcient magnitude to constitute the risk of
electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
The “Caution, hot surface” symbol indicates that the marked item may be hot and
should not be touched.
The “Electro Static Discharge (ESD) warning” symbol indicates that trouble (including
equipment malfunction) due to static electricity may occur in certain conditions.
The “OFF/ON” symbol indicates connection to or disconnection from the mains, at
least for mains switches.
The “Alternating current” symbol indicates that the equipment is suitable for
alternating current only.
WARNING:
Use the included AC power cord so as not to interfere with radio and television reception.
If you use other cables, it may cause interference with radio and television reception.
OTHERSPRECAUTIONS FEATURES PREPARATION TROUBLE-
SHOOTING CONTENTS
CAUTION:
Changes or modications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his or her own expense.
Operation is subject to the following two conditions;
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
WARNING:
In the USA or Canada, use the AC power cord according to the recommendations as
below, in order to comply with UL60950-1 and CAN/CSA C22.2 No. 60950-1-03.
Connect to the 120 V receptacle of the room or the host equipment.
The AC power cord should be UL or CSA approved and consist of type SVT, size
16 or 18AWG, length 2 m or shorter cord with IEC60320-1/C13 type, 125 V 10 A or
higher rating connector and NEMA 5-15 type, 125 V 10 A or higher rating plug.
Use the AC power cord as specied above, so as not to interfere with radio and
television reception.
If you use other cables, it may cause interference with radio and television reception.
WARNING:
In Europe, use the AC power cord according to the recommendations as below, in
order to comply with EN60950-1.
Connect to the 230 V receptacle of the room or the host equipment.
The AC power cord should be VDE approved and consist of core size 0.75 mm2 or
bigger, length 2 m or shorter cord with IEC60320-1/C13 type, 250 V 10 A or higher
rating connector and CEE(7)VII type, 250 V 10 A or higher rating plug.
Use the AC power cord as specied above, so as not to interfere with radio and
television reception.
If you use other cables, it may cause interference with radio and television reception.
WARNING:
The socket outlet shall be installed near the equipment and shall be easily accessible.
Note: This symbol mark is for EU countries only.
This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and Annex IV, and/or
to the directive 2006/66/EC Article 20 Information for end-users and Annex II.
Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and
components which can be recycled and/or reused.
This symbol means that electrical and electronic equipment, batteries and accumulators, at their end-of-life,
should be disposed of separately from your household waste.
If a chemical symbol is printed beneath the symbol shown above, this chemical symbol means that the battery
or accumulator contains a heavy metal at a certain concentration. This will be indicated as follows:
Hg: mercury (0,0005%), Cd: cadmium (0,002%), Pb: lead (0,004%)
In the European Union there are separate collection systems for used electrical and electronic products,
batteries and accumulators.
Please, dispose of this equipment, batteries and accumulators correctly at your local community waste
collection/recycling centre.
Please, help us to conserve the environment we live in!

Product specificaties

Merk: Mitsubishi
Categorie: Printer
Model: CP-D707DW

Heb je hulp nodig?

Als je hulp nodig hebt met Mitsubishi CP-D707DW stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Printer Mitsubishi

Mitsubishi

Mitsubishi CP9550DW-S Handleiding

26 Juni 2023
Mitsubishi

Mitsubishi CP-D70DW Handleiding

23 April 2023
Mitsubishi

Mitsubishi CP-D90DW Handleiding

18 April 2023
Mitsubishi

Mitsubishi CP-D707DW Handleiding

7 April 2023
Mitsubishi

Mitsubishi CPK60 Handleiding

12 Februari 2023
Mitsubishi

Mitsubishi CP9800DW Handleiding

1 Februari 2023
Mitsubishi

Mitsubishi P93DW Handleiding

17 December 2022
Mitsubishi

Mitsubishi P91E Handleiding

23 November 2022
Mitsubishi

Mitsubishi CP8000DW Handleiding

8 November 2022
Mitsubishi

Mitsubishi CP9600DW Handleiding

4 November 2022

Handleiding Printer

Nieuwste handleidingen voor Printer

Xerox

Xerox WorkCentre Pro 420 Handleiding

2 December 2024
Xerox

Xerox WorkCentre Pro 416Pi Handleiding

2 December 2024
Xerox

Xerox Document Centre 425 Handleiding

2 December 2024
Xerox

Xerox Wide Format IJP 2000 Handleiding

2 December 2024
Xerox

Xerox ColorQube 9202 Handleiding

2 December 2024
Brother

Brother HL-B2100D Handleiding

2 December 2024
Brother

Brother MFC-7880DN Handleiding

2 December 2024
Brother

Brother HL-1222WE Handleiding

2 December 2024
Brother

Brother MFC-L2712DW Handleiding

2 December 2024
Brother

Brother DCP-T425W Handleiding

2 December 2024