Mio Mivue 760D Handleiding

Mio Dashcam Mivue 760D

Lees hieronder de 📖 handleiding in het Nederlandse voor Mio Mivue 760D (3 pagina's) in de categorie Dashcam. Deze handleiding was nuttig voor 174 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/3
M760D
STARVIS dual cam
Detachable GPS Rider dash cam Installation
Guide
Suggested installation location for
each accessory
Main device Reference installation location
Example 1
Scooter
Example 2
Straddle dual-purpose motorcycle
WiFi
Avoid installing the Main
device at locations with
higher temperatures such
as next to the engine or
at the bottom of the
storage compartment, or
being covered by
raincoat; it is also
recommended to fix it on
the side using the buckle.
C. Front cam
B. GPS multifunction control box
A. Main device
D. Rear cam
If the Main device is
exposed (rail will fall
on it), be sure to
tighten the
anti-dismantle screws
of the memory card.
Avoid hiding the front
(the side with the logo)
of the Main device
under metal objects in
order to prevent poor
WiFi reception.
A.
To install the Main device at the front storage
compartment, the front and rear cams can be
switched around for installation.
A.
The Main device can be installed in the
toolbox space.
B.
The Main device can be installed on the side of
the storage compartment under the seat, but
avoid covering it with raincoats and resulting to
poor radiation.
Avoid attaching it at locations near the bottom
where heat source is emitted (the bottom of the
storage compartment is usually where the
engine and battery are installed).
C
B
A
D
A
A
B
Things you need to know before installation:
1. The following installation guide is for reference only due to different brands, model
types and personal usage habits; thorough discussion with vehicle mechanics is
recommended before performing installation.
3. The input of the M760D power cable is 12V/2A; please confirm whether the vehicle’s
circuit voltage and current can bear the load in order to prevent the fuse of the
motorcycle to burn due to overload. Some vehicle models have reserved backup
power; please use a multimeter to confirm whether the backup power connector can
be used before installation.
5. Before officially installing the dash cam, confirm that the BMW connector of each
cable segment is properly tightened and wrapped with thermal casing or waterproof
tape in order to reduce the scratching of internal objects or generating strange noises
due to vibrations from the motorcycle.
6. To install it on the Gogoro electric scooter, please discuss with Gogoro’s genuine
mechanic to confirm whether the charging port can supply 12V/2A power before
installation.
2. Before official installation, please connect the circuits of all components (including
front and rear cams, Main device, GPS multifunction control box and 12V power cable);
first connect the 12V power cable to the battery or fuse and confirm that the functions
of each component can be successfully turned on, and then hide the cables and
perform installation.
4. After the power of the motorcycle is turned on, it takes approximately 10-12 seconds
for power to be supplied to the dash cam and turned on; at this time, will blue light
flash on the GPS multifunction control box.* If red light flashes it means something is
abnormal, and the cable segments must be checked to see if they are properly and
tightly connected.
GPS multifunction control box
Reference installation location
Front and rear cam Reference installation location
cams must be used by connecting with signal
extension cables; do not bend the signal cable when
storing the excess cables.
Motorcycles have bilateral symmetry
designs; cams should be installed at
metal or central backbone locations
with hard structures as much as
possible in order to reduce vibrations
and prevent the video quality from
being affected due to shaking while
riding.
Oil pressure (front fork) stroke length
should be considered before
installing in order to prevent the
extending and contracting of shock
absorbers from extruding the cam
due to emergency braking or big road
pits.
Press the outer casing of the
motorcycle with your hands
before installing and avoid
installing on soft and flexible
structures in order to reduce
vibrations.
The cam base should be
tightened as much as possible,
and attach smoothly with the
installation frames or motorcycle
casing.
Avoid installing the cams at locations that vibrate
easily; this way the videos will not shake as much
(screen fluctuation or bent telephone poles), and
the video quality will be clearer.
When confirming to positions of the front and rear
cam, please use the “Live View” function of the
mobile MiVue Pro App, and press the “田” icon to call
out the calibration lines to confirm the positions (the
frame can be adjusted upwards and downwards,
and the cam can rotate 360 degrees), and then
remove the 3M tape to attach the cam to the vehicle
body.
* In order to prevent the adhesion from being
weakened and causing the cam to fall off, do not
attach and remove the 3M tape repeatedly.
Installing the GPS multifunction control box on the handle is
recommended; it can be installed on the left or right handle based on
user habits, only that the side with the buttons must face up in order to
avoid affecting GPS reception.
Japanese/European roadster
(model in this example DUCATI-S4RS)
It is recommended to install the front cam on the metal
backbone and install the rear cam on the platform at the back of
the motorcycle.
AB
A. B.
Japanese sport bike
(model in this example HONDA CBR-1000RR)
Install the front cam close to the oil pressure fork and not the center;
the rear cam can be installed on the platform at the back of the
motorcycle.
A
B
A. B.
Motorcycle
(model in this example SYM-RV270)
Install the front cam close to the oil pressure fork and not the center;
the rear cam can be installed on the platform at the back of the
motorcycle.
A. B.
A
B
Scooter
(model in this example SUZUKI-NEX)
Install the front cam on the handle platform; the rear cam can be
installed on the platform at the back of the scooter.
A. B.
A
B

Product specificaties

Merk: Mio
Categorie: Dashcam
Model: Mivue 760D

Heb je hulp nodig?

Als je hulp nodig hebt met Mio Mivue 760D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Dashcam Mio

Mio

Mio MiVue C595W Handleiding

6 November 2024
Mio

Mio MiVue C595WD Handleiding

6 November 2024
Mio

Mio MiVue J30 Handleiding

6 November 2024
Mio

Mio MiVue 802 Handleiding

6 Januari 2024
Mio

Mio MiVue 955W Handleiding

4 Januari 2024
Mio

Mio Mivue C450 Handleiding

18 Juni 2023
Mio

Mio MiVue 508 Handleiding

24 Mei 2023
Mio

Mio MiVue C540 Handleiding

16 Mei 2023
Mio

Mio MiVue C335 Handleiding

10 Mei 2023
Mio

Mio Mivue C312 Handleiding

8 Mei 2023

Handleiding Dashcam

Nieuwste handleidingen voor Dashcam

Minolta

Minolta MNCD355X Handleiding

21 November 2024
Minolta

Minolta MNCD337N Handleiding

21 November 2024
Minolta

Minolta MNCD2K10 Handleiding

21 November 2024
Cowon

Cowon AW1 Auto Capsule Handleiding

17 November 2024
Xblitz

Xblitz S8 Handleiding

15 November 2024
Uniden

Uniden iGO CAM 445 Handleiding

2 November 2024
AZDome

AZDome M300S Handleiding

2 November 2024
Garmin

Garmin Dash Cam Mini 3 Handleiding

2 November 2024
Cobra

Cobra SC 120 Handleiding

28 Oktober 2024
Sencor

Sencor SCR 3300 Handleiding

26 Oktober 2024