Milwaukee M18 Fuel 2724-21HD Handleiding
Milwaukee
Bladblazer
M18 Fuel 2724-21HD
Lees hieronder de 📖 handleiding in het Nederlandse voor Milwaukee M18 Fuel 2724-21HD (26 pagina's) in de categorie Bladblazer. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/26
Cat. No. / No de cat.
2724-20
M18â„¢ FUELâ„¢ BLOWER
SOUFFLANTE FUELâ„¢ M18â„¢
SOPLADOR FUELâ„¢ M18â„¢
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
2
IMPORTANT
SAFETY
INSTRUCTIONS
WARNING
Read all safety warnings,
instructions, illustrations
and speciîš¿cations provided with this power tool.
Failure to follow all instructions listed below may result
in electric shock, îš¿re and/or serious injury. Save all
warnings and instructions for future reference.
READ ALL INSTRUCTIONS
BEFORE USE
WORK AREA SAFETY
•Do not use in the presence of explosive dust, liquids
or vapors. Power tools have motors and other parts
that can produce sparks during normal use. Do not
use within 30 feet of areas where explosive materials
may be present (such as gasoline pumps and places
where liquids like paint thinners, cleaners, solvents,
etc. are stored).
• Do not use where oxygen or anesthetics are used.
• Do not allow to be used as a toy. Close attention
is necessary when used by or near children. Store
idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
•Use extra care when using on stairs. Do not over-
reach. Keep proper footing and balance at all times.
Keep work area clean and well lit. This enables
better control of the tool in unexpected situations.
•Avoid dangerous environmental conditions. To
reduce the risk of electric shock, do not expose to
rain. Store tool indoors.
• Inspect the area before using the power tool. Remove
all debris and hard objects such as rocks, glass, wire,
etc. that can ricochet, be thrown, or otherwise cause
injury or damage during operation.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use com-
mon sense when operating a power tool. Do not
use a power tool while you are tired or under the
inuence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
•Always wear eye protection. Use of this tool can
result in foreign objects being blown into eyes,
which can result in eye damage.
•Wear a face or dust mask when working in dust situ-
ations. Dust particles can harm your lungs.
• Use personal protective equipment. Protective equip-
ment such as hearing protection, protective clothing, and
non-skid safety shoes used for appropriate conditions
will reduce personal injuries.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair can
be caught in moving parts.
• Do not point tool at self or bystanders. Keep bystand-
ers 50' away during use. Objects may be thrown or
ricochet in all directions.
• Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.
POWER TOOL USE AND CARE
• Use the power tool, accessories, etc. in accordance
with these instructions, taking into account the
working conditions and the work to be performed.
Use of the power tool for operations di󰀨erent from those
intended could result in a hazardous situation.
• Prevent unintentional starting. Ensure the switch
is in the o󰀨-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your îš¿nger on the
switch or energizing power tools that have the switch
on invites accidents.
• Use the correct power tool for your application. The
correct power tool will do the job better and safer at the
rate for which it was designed.
• Use only as described in this manual. Use only
manufacturer’s recommended attachments.
• Do not point tool at anything that is burning or
smoking such as cigarettes, matches, or hot ashes.
•To reduce the risk of health hazards from vapors or
dust, do not use tool near tool toxic, carcinogenic
or other hazardous materials such as asbestos,
arsenic, barium, beryllium, lead, pesticides or other
health endangering materials.
•
WARNING
Some dust created by power
sanding, sawing, grinding,
drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these
chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to îš¿lter
out microscopic particles.
• Do not use power tool if the switch does not turn it
on and o󰀨. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
•Avoid accidental starting. Ensure the switch is
in the o󰀨-position before inserting battery pack.
Inserting battery packs in tools that have the switch on
invites accidents.
• Do not put hands or objects into openings. Do not
use with any opening blocked; keep free of dust, lint,
hair, and anything else that may reduce air ow.
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
• Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may a󰀨ect the
power tool’s operation. If damaged, have the power
tool repaired before use. Many accidents are caused
by poorly maintained power tools.
BATTERY PACK USE AND CARE
• Remove the battery pack from the power tool before
making any adjustments, changing accessories,
storing, or any time the power tool is not in use.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
•Turn o󰀨 power tool before removing battery pack.
• Do not handle battery pack, tool, or charger (including
charger plug and terminals) with wet hands.
3
•Before using the battery pack or charger read the
operator’s manuals, and any labels on the battery
pack, charger and tool.
•Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of îš¿re when used with
another battery pack.
• Use tool only with specically designated battery
packs. Use of any other battery packs may create a
risk of injury and îš¿re.
• When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a îš¿re.
• Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, ush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns. It may be toxic
if swallowed.
• Do not use damaged battery pack or tool. If battery
pack or appliance are not working as they should, have
been dropped, damaged, left outdoors, or dropped into
water, return them to a service center.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to îš¿re or temperature
above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature range
speciîš¿ed in the instructions. Charging improperly or at
temperatures outside the speciîš¿ed range may damage
the battery and increase the risk of îš¿re.
SERVICE
• Have your power tool serviced by a qualied repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
•Maintain labels and nameplates. These carry im-
portant information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
READ AND SAVE ALL
INSTRUCTIONS FOR
FUTURE USE
FUNCTIONAL DESCRIPTION
34
1
5
1. Speed control button
2. Lock on button
3. Trigger
4. Handle
5. Air intake vent
6. Tube latch
7. Tube
7
2
6
SPECIFICATIONS
Cat. No. 2724-20 .....................................................
Volts 18 DC..............................................................
Battery Type .................................................M18â„¢
Charger Type M18â„¢................................................
No Load RPM ...............................................14 400
Air speed (CFM) .......................................... 0 - 450
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Safety Alert Symbol
Read Operator's Manual
Always wear eye protection, hearing protection,
and protective clothing and footwear.
Do not use in rain or wet locations. Electric
shock could occur.
mini mum
50' / 15m
Keep bystanders 50' away during use
Do not point tool at self or bystanders. Objects
may be thrown or ricochet in all directions.
Do not put hands or objects into openings.
Laceration can occur.
Keep hair contained. It can be pulled into
moving parts.
Do not wear loose clothing or jewelry. It can
be pulled into moving parts.
C US
UL Listing for Canada and U.S.
ASSEMBLY
WARNING
Recharge only with the
charger speciîš¿ed for the
battery. For speciîš¿c charging instructions, read the
operator’s manual supplied with your charger and
battery.
Removing/Inserting the Battery
To remove the battery, push in the release buttons and
pull the battery pack away from the tool.
WARNING
Always remove battery pack
before changing or remov-
ing accessories.
To insert the battery, slide the pack into the body of the
tool. Make sure it latches securely into place.
WARNING
Only use accessories spe-
ciîš¿cally recommended for
this tool. Others may be hazardous.
Tube Assembly
WARNING
To reduce the risk of injury,
do not operate blower with-
out tube securely in place. Never reach
into blower through tube hole.
To install, line up the tab on the tube with
the notch in the housing. Slide the tube
into the housing until it snaps in place.
Pull on the tube to ensure it is secure.
To remove the tube for storage, press
the tube latch and pull the tube out of
the housing. Always re-install the tube
before use.
Product specificaties
| Merk: | Milwaukee |
| Categorie: | Bladblazer |
| Model: | M18 Fuel 2724-21HD |
Heb je hulp nodig?
Als je hulp nodig hebt met Milwaukee M18 Fuel 2724-21HD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Bladblazer Milwaukee
5 November 2024
10 April 2024
21 Maart 2023
20 Maart 2023
Handleiding Bladblazer
- Bladblazer Bosch
- Bladblazer Panasonic
- Bladblazer DeWalt
- Bladblazer Karcher
- Bladblazer WOLF-Garten
- Bladblazer Al-ko
- Bladblazer Alpina
- Bladblazer Atika
- Bladblazer Black Decker
- Bladblazer Brandson
- Bladblazer Dolmar
- Bladblazer Echo
- Bladblazer Einhell
- Bladblazer Eurogarden
- Bladblazer Farmer
- Bladblazer Ferrex
- Bladblazer Flex
- Bladblazer Florabest
- Bladblazer Flymo
- Bladblazer Fuxtec
- Bladblazer Gamma
- Bladblazer Garden Feelings
- Bladblazer Gardena
- Bladblazer Gardenline
- Bladblazer Gardol
- Bladblazer GBM
- Bladblazer GForce
- Bladblazer Global
- Bladblazer Greenworks
- Bladblazer Grizzly
- Bladblazer Gude
- Bladblazer Hikoki
- Bladblazer Hitachi
- Bladblazer Homelite
- Bladblazer Honda
- Bladblazer Husqvarna
- Bladblazer Hyundai
- Bladblazer Kibani
- Bladblazer Kress
- Bladblazer Makita
- Bladblazer McCulloch
- Bladblazer Metabo
- Bladblazer Mr Gardener
- Bladblazer MTD
- Bladblazer Parkside
- Bladblazer Pattfield
- Bladblazer Powerplus
- Bladblazer Powertec Garden
- Bladblazer Remington
- Bladblazer Robust
- Bladblazer Ryobi
- Bladblazer Scheppach
- Bladblazer Skil
- Bladblazer Solo
- Bladblazer Stanley
- Bladblazer Stiga
- Bladblazer Stihl
- Bladblazer Tanaka
- Bladblazer Tesco
- Bladblazer Texas
- Bladblazer Toledo
- Bladblazer Top Garden
- Bladblazer Topcraft
- Bladblazer Toro
- Bladblazer Troy-Bilt
- Bladblazer Varo
- Bladblazer Vonroc
- Bladblazer Westfalia
- Bladblazer Worx
- Bladblazer Ozito
- Bladblazer Black And Decker
- Bladblazer Cocraft
- Bladblazer Meec Tools
- Bladblazer Hilti
- Bladblazer Cobra
- Bladblazer Cotech
- Bladblazer Truper
- Bladblazer Fieldmann
- Bladblazer McGregor
- Bladblazer Prime3
- Bladblazer Sun Joe
- Bladblazer Yard Force
- Bladblazer Cramer
- Bladblazer Grouw
- Bladblazer Maruyama
- Bladblazer Sovereign
- Bladblazer Spear & Jackson
- Bladblazer Tryton
- Bladblazer Powerworks
- Bladblazer Craftsman
- Bladblazer Verto
- Bladblazer Zenoah-Komatsu
- Bladblazer Snow Joe
- Bladblazer Yato
- Bladblazer Jonsered
- Bladblazer Bestgreen
- Bladblazer Baumr-AG
- Bladblazer IKRA
- Bladblazer MTM
- Bladblazer Arebos
- Bladblazer Anova
- Bladblazer Massimo
- Bladblazer LawnMaster
- Bladblazer Bahr
Nieuwste handleidingen voor Bladblazer
14 November 2024
3 November 2024
3 November 2024
2 November 2024
23 September 2024
6 September 2024
5 September 2024
5 September 2024
27 Augustus 2024
7 Augustus 2024