Milwaukee M18 FTCHS14 Handleiding

Milwaukee Zaagmachine M18 FTCHS14

Lees hieronder de 📖 handleiding in het Nederlandse voor Milwaukee M18 FTCHS14 (16 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
OPERATOR'S MANUAL
Cat. No.
M18 FTCHS12, M18 FTCHS14
WARNING
To reduce the risk of injury, user must read and understand operator's manual.
M18 FUEL 12" (305 MM) AND 14" (356 MM) TOP HANDLE
CHAINSAWS
2
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings, instruc-
-
WORK AREA SAFETY
ELECTRICAL SAFETY
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
Do not operate power tools in explosive atmo-
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
tions provided with this power tool. Failure to follow
all instructions listed below may result in electric shock,
Save all warnings and in-
structions for future reference. The term "power tool"
in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
PERSONAL SAFETY
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
reduce risk of electric shock.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
A
moment of inattention while operating power tools
may result in serious personal injury.
Use personal protective equipment. Always
wear eye protection. Protective equipment such
Prevent unintentional starting. Ensure the switch
source and/or battery pack, picking up or carrying
the tool.
the switch or energising power tools that have the
switch on invites accidents.
Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
POWER TOOL USE AND CARE
Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action can
cause severe injury within a fraction of a second.
taking into account the working conditions and
the work to be performed. Use of the power tool
result in a hazardous situation.
BATTERY TOOL USE AND CARE
Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
Do not force the power tool. Use the correct power
tool for your application. The correct power tool
will do the job better and safer at the rate for which
it was designed.
Do not use the power tool if the switch does not
Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
have the power tool repaired before use. Many ac-
cidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
manufacturer. A charger that is suitable for one type
with another battery pack.
battery packs. Use of any other battery packs may
When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
If operating a power tool in a damp location is
unavoidable, use a residual current device
(RCD) protected supply. Use of a RCD reduces
the risk of electric shock.
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
3
SERVICE
General chainsaw safety warnings:
SPECIFIC SAFETY RULES
FOR CHAINSAWS
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorised service providers.
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acciden-
eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
Keep all parts of the body away from the saw
chain when the chainsaw is operating. Before you
start the chainsaw, make sure the saw chain is
not contacting anything. A moment of inattention
while operating chainsaws may cause entanglement
of your clothing or body with the saw chain.
Always hold the chainsaw with your right hand
on the rear handle and your left hand on the front
handle. Holding the chainsaw with a reversed hand
should never be done.
Hold the chainsaw by insulated gripping surfaces
only, because the saw chain may contact hidden
wiring or its own cord. Saw chains contacting a
"live" wire may make exposed metal parts of the
chainsaw "live" and could give the operator an
electric shock.
Wear eye protection. Further protective equip-
ment for hearing head, hands, legs, and feet is
recommended. Adequate protective clothing will
contact with the saw chain.
Always keep proper footing and operate the
and level surface. Slippery or unstable surfaces may
cause a loss of balance or control of the chainsaw.
When cutting a limb that is under tension be alert
for spring back.
is released the spring loaded limb may strike the
operator and/or throw the chainsaw out of control.
Use extreme caution when cutting brush and sap-
lings. The slender material may catch the saw chain
Follow instructions for lubricating, chain tension-
ing and changing the bar and chain. Improperly
tensioned or lubricated chain may either break or
increase the chance for kickback.
Cut wood only. Do not use chainsaw for purposes
not intended. For example: do not use chainsaw
for cutting metal, plastic, masonry or non-wood
building materials. Use of the chainsaw for opera
-
-
ous situation.
This chainsaw is not intended for tree felling.
intended could result in serious injury to the operator
or bystanders.
Causes and operator prevention of kickback:
Kickback may occur when the nose or tip of the guide
bar touches an object, or when the wood closes in and
pinches the saw chain in the cut.
Tip contact in some cases may cause a sudden
reverse reaction, kicking the guide bar up and back
towards the operator.
Pinching the saw chain along the top of the guide
bar may push the guide bar rapidly back towards
the operator.
Either of these reactions may cause you to lose con-
trol of the saw which could result in serious personal
injury. Do not rely exclusively upon the safety devices
built into your saw. As a chainsaw user, you should
take several steps to keep your cutting jobs free from
accident or injury.
Kickback is the result of chainsaw misuse and/or incor-
rect operating procedures or conditions and can be
avoided by taking proper precautions as given below:
-
circling the chainsaw handles, with both hands on
the saw and position your body and arm to allow
you to resist kickback forces. Kickback forces can
be controlled by the operator, if proper precautions
are taken. Do not let go of the chainsaw.
Do not overreach and do not cut above shoulder
height. This helps prevent unintended tip contact and
enables better control of the chainsaw in unexpected
situations.
Only use replacement guide bars and saw chains
Incorrect replace-
ment guide bars and saw chains may cause chain
breakage and/or kickback.
Follow the manufacturers sharpening and
maintenance instructions for the saw chain.
Decreasing the depth gauge height can lead to in-
creased kickback.
Use extreme caution to reduce the risk of falling.
Keep the saw chain well clear of any harness and
lifeline to prevent them from being severed.
Do not attempt to block a tree until you have an
understanding of all the risks and how to avoid
them. Serious injury could occur to the operator or
bystanders from a blocking tree.
Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or
temperature above 130°C (265°F) may cause
explosion
Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instruc-
tions. Charging improperly or at temperatures
outside the specified range may damage the
battery and increase the risk of fire.
Do not operate a chainsaw on a ladder, from a
rooftop, or any unstable support. Operation of a
chainsaw in this manner could result in serious
personal injury.
Carry the chainsaw by the front handle with the
chainsaw switched off and away from your
body. When transporting or storing the chain-
saw always fit the guide bar cover. Proper
handling of the chainsaw will reduce the likelihood
of accidental contact with the moving saw chain.
Do not operate a chainsaw in a tree unless you
have been specifically trained to do so.
Operation of a chainsaw in a tree without proper
training could increase the risk of serious personal
injury.


Product specificaties

Merk: Milwaukee
Categorie: Zaagmachine
Model: M18 FTCHS14

Heb je hulp nodig?

Als je hulp nodig hebt met Milwaukee M18 FTCHS14 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Zaagmachine Milwaukee

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine